This is a guide to help you root and install cwm recovery on Micromax bolt a35.
This is a tested method and is working fine.
NOTE: FOLLOW ALL THE STEPS CAREFULLY OR YOU WILL END UP BRICKING YOUR PHONE.
NOTE: ROOTING YOUR PHOINE VOIDS IT'S WARRANTY
TO ROOT YOUR PHONE:-
1.Download Moborobo from here and install drivers for your phone(ENABLE USB DEBUGGING BY GOING IN SETTINGS -> APPLICATION -> DEVELOPMENT -> ENABLE USB DEBUGGING)
2.Downlaod kingo root app from here
3.Now open kingo root app and root your phone by clicking root again button.(USB DEBUGGING SHOULD BE TURNED ON)
4.VOILA.. YOUR PHONE IS ROOTED...
Now, how to install CWM Recovery on your phone.
1.First downlaod cwm recovery from here
2.Download adb drivers from here.
3.install adb drivers and connect your phone, then right click on computer properties and click on device manager then look for e56 with ! sign right click it and click on update drivers then locate the adb drivers you downloaded and install them.
4.now copy the recovery.img file to adb driver folder
5..Now turn off your phone and press volume down key + power button.
6.open command prompt in where you installed the adb drivers by holding shift button and right clicking on command prompt
7.then write this command :-
fastboot devices
Click to expand...
Click to collapse
and if it shows your device id , you are good to go.
8.now write this command:-
fastboot flash recovery recovery.img.img
Click to expand...
Click to collapse
9.recovery will be flashed.
10.download quick boot app form google play and click on recovery and you will have cwm recovery.:good:
Will this method works for Micromax A116
Hi,
Will this method works for Micromax A116 ?
You can download framaroot to root your phone in 1 click. Link :- http://forum.xda-developers.com/showthread.php?t=2130276
For cwm go here and follow the instructions:- http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A110Q using xda app-developers app
@aarish1 iam looking forward to rooting my a35 bolt ... but i'd found that there is no thread for a35 and no roms... for the phone ....... KINDLY can You please help me in finding things for a35.......
sameerfardeen said:
Hi,
Will this method works for Micromax A116 ?
Click to expand...
Click to collapse
it wont work on your canvas hd it will infact brick your canvas hd
cant mount sd card
working now i used (RecoveryManager_v0.37b) and flashed it in the phone thanks friend....
adb drivers
hey how to install adb drivers after downloading the zip file?
I am unable to install via device manager
Can you help me on how to install custom recovery in A35
Sent from my Micromax A117 using XDA Premium 4 mobile app
Hey can you send link of recovery manager !
Sent from my HTC Vision using XDA Free mobile app
help
hi bro help cant root when trying with SRS root asks to select FRODO or ARAGORN or LEGOLAS on my phone but can't find when checking in frama root gives me the vulnerability error shows device seems not vulnerable to exploit in framaroot also tried with kingo root and unlockroot but no help pls help I just want to root it
Rooting
Hi
Guys kingo root doesn't work just uses srsroot and you can root easily.
it uses many different exploits till root is achieved.
thanks
Moborobo Help
Hi aarish1,
I have tried every USB driver available on the internet, but can't find the e56 driver and therefore no root for my Bolt A35.
Can you please share your version of Moborobo, does it support the A35 out of the box?
Can you just host the pre-requisite files somewhere?
Thanks,
sunshinekhan
siraj2cool said:
working now i used (RecoveryManager_v0.37b) and flashed it in the phone thanks friend....
Click to expand...
Click to collapse
Not showing device id when in cmd
what to do
Twrp for q324 bolt
How to root micromaxax bolt q339
How to root micromax bolt q339
gaurav247star said:
@aarish1 iam looking forward to rooting my a35 bolt ... but i'd found that there is no thread for a35 and no roms... for the phone ....... KINDLY can You please help me in finding things for a35.......
Click to expand...
Click to collapse
There are many ROMs ....plzzzzzzzz Google for ROMs
Sent from my MotoG3-TE using XDA-Developers mobile app
Note- Before doing this, please ROOT your Lava Iris 458q. for rooting check this link
http://forum.xda-developers.com/showthread.php?p=49976717#post49976717
link to Download necessary file https://drive.google.com/folderview?id=0B74Xjste8p2VNmZGQWxvNTAteWc&usp=sharing
Note:-Please put all this in one singe folder)
Instructions:-
1. Install all Drivers inside that downloaded folder.
2. Put your phone in USB debugging mode from Developer Options in the Settings Menu. (If you cant find the Developer options, go to Settings> About Phone and tap the "build number" 8 times.)
3.Connect your phone to the computer. (In USB storage mode)
4. Open MtkDroidtools.exe from the folder MTK droid tools you downloaded before.
5. Wait till the device is detected (on the bar at the bottom)
6.Click on the ROOT button. and wait till the process is done.
7. Now go to the "root,backup,recovery" Tab.
8. from the 2nd box, select the option "To choose the boot.img file"
9.Click on the button "Recovery and Boot" and choose the Boot.img file downloaded before.
10. Click YES on the next popup asking Automatic CWM and YES on ALL the following popups.
After Reboot, the phone is successfully in CWM recovery MODE !!! (Use Volume up and down buttons to navigate and Power button as Enter)
Now that you have install CWM,
Note:-use windows 7 or lower version windows
Alternate Method
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:
yes it perfectly worked and rooted my phone.
patel_s said:
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:
Click to expand...
Click to collapse
Can u provide rooting method for lava iris x1 because vroot method is not working... It has KitKat running on it.
Sent from my iris X1 using XDA Free mobile app
This Procedure for baseband R06
1. Download & Install Framaroot.apk and open it.
2. Choose Install SuperSu
3. Then Click on "Boromir".
4. It Will Display A Root Confirmation Message, Click On "OK" And Then "REBOOT" Your Device.
5. After Reboot You Will Find SuperSu Application In The App Drawer.
If you see the application then you have successfully rooted your device.
Thanks to the developers of FRAMAROOT
download link http://forum.xda-developers.com/attachment.php?attachmentid=2164433&d=1375631419
This Procedure for R03
1.download and install in vroot in pc,
2.download your phone driver if are you using win xp
3.next step connect your phone from PC,Laptop
4.open vroot in pc and see green root bottom
5. then see your phone is rooted succesfully
6.your phone is rebooting your's phone succes rooted
download lik http://get.file2desktop.com/DownloadManager/Get?p=3383&d=11334&l=10775&n=1
hit thanks botton
This is a guide on rooting the Alcatel Pop C2 4032A using 2 methods.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
How to Root using the Framaroot method:
Enable unknown sources from settings to allow installation of third party apps.
Download latest framaroot.apk version from here .
Install framaroot and click on the Barahir root exploit.
Reboot device and enjoy root .
How to Root using the recovery method
Requirements
SP flash tools
Mtk VCOM drivers (preloader drivers)
ADB driver
USB Cable
Mtk6572 Scatter
Recovery of your choice
SuperSu zip
Android phone of course
Working brain
Download the SP flash tools and Mtk VCOM drivers and extract them to desktop.
Install the Mtk VCOM drivers.
Download the scatter file and place also on the desktop.
Download the SuperSu.zip and place it on the sdcard or internal storage.
Download the recovery of your choice and place it on your desktop
Open the folder with SP flash tools and run flash_tool as administrator
Select the scatter file by clicking on scatter loading
Check the recovery check box and click on location and select the recovery of your choice.
Turn off your phone.
Connect the usb cable to the computer but don't connect the phone as yet.
Click on the download button on the SP flash tool and then connect your phone to the computer.
Wait for it to flash and then reboot into recovery using adb commands once the phone has booted up.
Once the phone is in recovery select install zip from sdcard and locate the SuperSU.zip.
Reboot and there you go root access
To Enable USB Debugging.
1. Go to settings and about phone
2. Tap the build number 7 times to enable development mode.
3. Go back and then go in development mode.
4. Enable USB debugging.
deleted
method not working for marshmallow
kuberrocks96 said:
Hello Guys,
Today i Kuber Sharma will tell you how to Root your Coolpad Note 3 Lite.
In this Tutorial i will tell how to Root:-
1 CoolUI 6.0 - Lollipop
2. CoolUI 8.0 - Marshmallow
Rooting CoolUI 6.0 Lollipop
Download:-
KingRoot app
TWRP CN3L
Note :- Good Net connection required.
1.Download KingRoot.apk
2.Open it
2.Click on Root
3.Wait for it to Complete
4.Done , You are rooted.
5.Now Download Flashify app and download TWRP
6.Open Flashify App and install Recovery
7.Reboot To TWRP
8.Reboot to System
9.Done , TWRP also Installed
https://youtu.be/2jeytBBUTdo
Rooting CoolUI 8.0 Marshmallow
Download :-
Super SU System less zip
Android_mt6735_scatterfile
Sptooldrivers
MTK drivers
Spflashtool
TWRP for CN3L
INSTALL SP Flash tool Drivers and MTK Drivers - Now Reboot.
Create a new folder name it TWRP and paste "recovery.img" and "MT6753_Android_scatter.txt" files into thisl folder.
Extract Spflashtool
Now right click on "flash_tool.exe" and run as administrater,after flashtool start,click on "scatter loading" and select "MT6753_Android_scatter.txt" .
Click on "download"(on left top side with green colour icon in spflash tool).
Now switch off phone and connect to Pc via USB cable
If everything fine then you will see a pop up with green tick.
Disconnect phone from PC.
Press Volume up and Power button till recovery comes on the screen(This is important step,don't boot into normal mode,after flashing recovery you have to direclty go to recovery mode by pressing Volume up + Power button similtaneously).
If you get Unmodified System Partition warning then swipe right to allow modifications.
Select "Install"
Select SuperSU-v2.78.zip ( System less Super SU )
Swipe right to confirm flash
Reboot the device.
Note:- if you found no superSU app on reboot,then reboot to recovery and flash superSU again.
Done , Your Device is Rooted.
Steps for driver installation in windows 8,8.1 and 10 users:
**Click the Start Start menu and select Settings.
**Click Update and Security.
**Click on Recovery.
**Click Restart now under Advanced Startup.
**Click Troubleshoot.
**Click Advanced options.
**Click Startup Settings.
**Click on Restart.
**On the Startup Settings screen press 7 or F7 to disable driver signature enforcement.
Your computer will restart and you will be able to install non-digitally signed drivers. If you restart your computer again the driver signature enforcement will be re-enabled.so don't restart again before successful installation of both drivers
Subscribe to my channel for more Videos on COOLPAD Note 3/Lite:-
https://youtu.be/aKQkdMj2iDE
Click to expand...
Click to collapse
I AM GETTING AN ERROR WHILE DOING THE ABOVE METHOD
I AM SENDING U LINK OF SCREENSHOT OF THE ERROR
https://drive.google.com/open?id=0B45g_zhLbKf7alRnUU9VZDBQdDQ
PLZ DO REPLY TO ME
jash gopani said:
I AM GETTING AN ERROR WHILE DOING THE ABOVE METHOD
I AM SENDING U LINK OF SCREENSHOT OF THE ERROR
https://drive.google.com/open?id=0B45g_zhLbKf7alRnUU9VZDBQdDQ
PLZ DO REPLY TO ME
Click to expand...
Click to collapse
Installed drivers?
im getting the same error
I don't see link for twrp recovery
Hey thanks for all the tutorial but i don't see the link for twrp recovery.
Jeron p wilson said:
Hey thanks for all the tutorial but i don't see the link for twrp recovery.
Click to expand...
Click to collapse
Added