Unlocked and rooted (or so I think) One SV (Boost). Can't flash anthing to it. Tried JB Stock Rom from Old Splatterhand but it won't flash (CWM). Getting Error in zip file (status 0) Installation aborted. Tried TWRP but it just loops. I REALLY need to get this up and running Wednesday, leaving for a trip and need phone. Can anyone help?
K2_CL PVT SHIP S-on RL
HBOOT-1.01.0000
RADIO-1.12.50.0115
Open DSP-v7.2.0221
EMMC boot
Jan 16, 2013
Did u try to wipe everything in your recovery?
Sent from my HTC One SV using xda app-developers app
Your still s-on
This means you have to flash the boot.img via fastboot with a computer
Related
i was trying to flash viper rom and it just keeps bootlooping to the htc screen i had cm10
i get to the hbppt scrren and i try to go in recovery and i see the clockwork for a sec and it reboots to the htc screen again
this is what is says
vle pvt s-on rl
hboot-1.14.004
radio-1.08ts.50.02.16
opendsp-v29.1.0.45.0622
emmc-boot
aug 14 2012
i need a way to get in recovery or something!
and the hboot is unlocked i just cant get it into recovery?? i tryed command prompt maybe im not doing it right idk??? i need help step by step
beekiller1 said:
i was trying to flash viper rom and it just keeps bootlooping to the htc screen i had cm10
i get to the hbppt scrren and i try to go in recovery and i see the clockwork for a sec and it reboots to the htc screen again
this is what is says
vle pvt s-on rl
hboot-1.14.004
radio-1.08ts.50.02.16
opendsp-v29.1.0.45.0622
emmc-boot
aug 14 2012
i need a way to get in recovery or something!
Click to expand...
Click to collapse
Could try the all-in-one toolkit to flash twrp recovery and boot.img then try flashing the rom in recovery.
From cm I think u need to do a full wipe before trying to install venom
Sent from my HTC One S using xda premium
ok i got it into recovery but noting is mounted?? and theres no roms or anything in there everything has been delelted
how can i put a rom in there or something
Run an ruu on the phone it will take u to stock again u can find the ruu from football's thread
Sent from a man, using a mobile phone
Hy,
i yesterday didn´t read on line in the tread "TrickDroid 4.0.0" and so i didn´t ota_updated my ones(s3) to 4.0.4 but tried to install trickdroid rom..
now i am in bootloop and don´t find out of...
my phone is from Austria(A1)
Code:
VILLEC2 PVT SHIP S-ON RL
HBOOT-2.09.0001
RADIO-16.07.20.18_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
May 10, 2012
i tried all RUU´s i found in the internet, BUT NO ONE WORKED, i always get the same error 131...
before trying the RUU i locked bootloader and flashed always original recovery
i tried all the RUU in this link http://androidfiles.org/uploads/?dir=ruu/VilleC2
what else can i DO?? or do i have to go to my provider ???
greets
hy guys i found out which RUU i need with this command
fastboot getvar cid
i got "cid: VODAP120"
SO i need i VODAFONE RUU, right???
if yes, from where????
please help
lordvampire said:
Hy,
i yesterday didn´t read on line in the tread "TrickDroid 4.0.0" and so i didn´t ota_updated my ones(s3) to 4.0.4 but tried to install trickdroid rom..
now i am in bootloop and don´t find out of...
my phone is from Austria(A1)
Code:
VILLEC2 PVT SHIP S-ON RL
HBOOT-2.09.0001
RADIO-16.07.20.18_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
May 10, 2012
i tried all RUU´s i found in the internet, BUT NO ONE WORKED, i always get the same error 131...
before trying the RUU i locked bootloader and flashed always original recovery
i tried all the RUU in this link http://androidfiles.org/uploads/?dir=ruu/VilleC2
what else can i DO?? or do i have to go to my provider ???
greets
Click to expand...
Click to collapse
What is your problem,if you have bootloop doesnt mean you need RUU now,post what was your procedure to flash TD ,thats how I wil know what you missed and maybe grlo you out
Sent from my HTC One S using xda app-developers app
i had trickdroid 3.0.0 installed and i downloaded trickdroid 4.0.0 and flashed it through TWRP... then i flashed boot.img and then erased cache.
now i am in bootloop ...
then i saw that trickdroid author tell to OTA update to 4.0.4 before flashing his 4.0.0 else you will have a bootloop (where i am in)..
flashing my old nandroid DOESNT HELP i am still im bootloop...
thx
Did you wipe everything before you tried to restore your nandroid? Did you also flash the stock recovery? If those don't work you might have to stay on TD v3.0.0.
Sent from my HTC One S using xda app-developers app
got my phot to boot with flashing nandroid and after nandroid flashing boot.img from TD3.0.0C2 and erasing cache.. strange, that it did not boot by only flashing nandroid..
greets
I'm running Viper Xl and want to go to aokp_evita_jb-mr1_milestone-2. When I try to flash the zip I get the following:
Finished running boot script.
installing '/sdcard/aokp_evita_unofficial_2013-0708.zip'...
checking for MD5 file...
skipping MD5 check: no MD5 file found
assert failed: getprop("ro.bootloader") == "2.14.00"
E:Error executing updater binary in zip '/sdcard/aokp_evita_jb-mr1_milestone-2
Error flashing zip '/sdcard/aokp_evita_jb-mr1_milestone-2.zip'
Updating partition details
Failed
I'm using TWRP, 2.6.0. Any help? Do I need to use Clockworkmod??
Marc A.
EVITA PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.14.0000
RADIO-0.24P 32.09.06
OpenDSP-v34.1.0.45.1219
eMMC-boot
Nov 26 2012, 18:37:14:-1
TWRP 2.6 is fine. Are you sure you have the 2.14 hboot? The installer is cancelling because it can't find the 2.14 hboot.
Sent from my Evita
Sorry. I checked. I'm on 2.15. How do I get to 2.14?
Marc
You need to run the 3.18 RUU, this includes the 2.14 hboot plus other components which are required.
Sent from my Evita
timmaaa said:
You need to run the 3.18 RUU, this includes the 2.14 hboot plus other components which are required.
Sent from my Evita
Click to expand...
Click to collapse
Since I'm a noob I have to ask...will this put me back to unrooted? Are there any side effects to doing this?
Marc
It will return the phone to a completely stock state, including ROM and recovery, so you will not have root. But your bootloader will remain unlocked so all you'll need to do is flash TWRP recovery again, then you can flash the rooted ROM of your choice, being AOKP in this case.
Sent from my Evita
timmaaa said:
It will return the phone to a completely stock state, including ROM and recovery, so you will not have root. But your bootloader will remain unlocked so all you'll need to do is flash TWRP recovery again, then you can flash the rooted ROM of your choice, being AOKP in this case.
Sent from my Evita
Click to expand...
Click to collapse
Worked like a charm! You da man!
Hi,
I am just a beginner for Android and I had got my One X + a month back.
Yesterday I unlocked the bootloader and before flashing the SuperUser, something went wrong and logs in TWRP recovery were stating that it was not able to mount the sdcard and system directory.
Well after a lot of investigation, I reflashed the TWRP recovery and then I was able to sideload the Viper ROM.
I was able to flash the boot.img also. The ROM flashing went fine and when I rebooted, it gets stuck at the boot screen (HTC original bootscreen) and does n't continue further.
I have tried reflashing with other ROMs as well but no luck.
Phone Details:
----------------------
EVITARE_UL PVT SHIP S-OFF RL
CID-11111111
HBOOT-1.32.0000
CPLD-NONE
MICROP-None
RADIO-1.1204.103.14
Please help me here to bring back my OX+ in working condition.
Afraid to ask if this is a symptom of my phone getting bricked. :'(
Wrong section bro this in the ( one xl ) thread
Sent from my HTC One XL using xda app-developers app
So I recently purchased the T-Mobile version of the HTC-Sensation... since then I've been trying to flash a custom JellyBean ROM onto my device. I've rooted and flashed custom roms on previous phones but the process for this one has been extremely confusing. I've been mainly following this tutorial: http://forum.xda-developers.com/showthread.php?t=1864053 I have the bootloader unlocked and I think I have S-Off, now I'm trying to flash a recovery image with the KSG utility but gives me a bunch of error messages that say FILE NOT FOUND - FASTBOOT.LOG and ACCESS DENIED and FILE NOT FOUND - ABD.LOG. I'm sorry if this is in the forum somewhere, but I've been working on this for hours and I can't figure this out. Any help would be greatly appreciated.
Additional Details: I'm running Android 2.3.4
When I boot into the bootloader it says
*** UNLOCKED ***
Pyramid PVT SHIP S-OFF RL
HBOOT-1.18.0000
RADIO-11.23.3504.07_M2
eMMC-boot
Aug 2 2011,22:35:52
EmporerD said:
I recently purchased the T-Mobile version of the HTC Sensation 4G and I've been following this tutorial: http://forum.xda-developers.com/showthread.php?t=1864053 to get it rooted with the intention of installing a custom Jellybean rom on my phone. I unlocked the bootloader but got stuck trying to S-off. Everything was going fine until the part where I run the temp_root.bat because I cannot get HTC sync to recognize my phone no matter what I try. I was wondering if anyone had the original version that came on the SD card or if there is a way to gain S-off without using HTC sync? Or can I get Jellybean without gaining S-off? Any help would be greatly appreciated, I'm pretty new this and feeling way in over my head here.
Additional Details: I'm running Android 2.3.4
When I boot into the bootloader it says
*** UNLOCKED ***
Pyramid PVT SHIP S-OFF RL
HBOOT-1.18.0000
RADIO-11.23.3504.07_M2
eMMC-boot
Aug 2 2011,22:35:52
Click to expand...
Click to collapse
You are already s-off ,if you want to flash custom Rom flash 3.33 universal firmware (be careful when flashing check the md5 sum) after that flash 4ext recovery and flash new rom
Edit here is link for 3.33 firmware. http://forum.xda-developers.com/showthread.php?t=1459767.
sent from HTC Sensation 4G
@EmporerD
first you don't need a htc sync..
second your phone is already success s-off..you can see that in your bootloader state..
now i think maybe you already forgot the step to remove temp root from your phone after success s-off process..you can do that by running temp_root_remove.bat from the guide that you follow above..
after you had remove temp root from your phone..then you can continued to flashing a 3.33 firmware.. to do that..
just download firmware file from here....then copied that PG58IMG.zip file to the root directory of your sd card (the root directory mean is don't place it that file in any folder..just place it in your sdcard) you can copied that file with card reader..after that just put in back your sd card to the phone...then boot into bootoader..and wait until bootloader check it that file then ask you to updating it...just confirm it yes with vol up button..then wait until finish and ask you to confirm reboot with press power button..
after that you can continued installing custom recovery..
just download custom recovery.img file from here and extracted that zip file then copied that recovery.img file to your adb/sdk folder (the same place as your adb.exe and fastboot.exe folder)..then you flashing it through FASTBOOT with fastboot command "fastboot flash recovery recovery.img"..done..now your phone already had a custom recovery..that are can installing any custom rom...
hope this help..
THANKYOU guys. This helps a lot. I'm going to call it a night for a now, but I will try your advice tomorrow and post updates.
@JJeamy
So I tried to remove the temproot by running the temproot-remove batch file, it didn't do anything so I downloaded the PG58IMG.zip and updated it in the bootoader, now phone is stuck in a bootloop...?
Update: I tried to continue with flashing the custom recovery, but the dialog just gets stuck on "waiting for device" ...
Update 2: Installing the older drivers for fixed the problem of flashing the recovery so my recovery works but it's still stuck in bootloop. Unfortunately I will probablyrun out of time before I can get a custom ROM flashed, but thanks everyone for your help I will update my progress later.
Bootloader now reads:
-Firmware-3.33-
Pyramid PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
EmporerD said:
@JJeamy
So I tried to remove the temproot by running the temproot-remove batch file, it didn't do anything so I downloaded the PG58IMG.zip and updated it in the bootoader, now phone is stuck in a bootloop...?
Click to expand...
Click to collapse
So you mean that you already had 3.33 firmware right...?
so you can continued installing custom recovery like what i told you above...then after that you can continued installing custom rom that you want...
Sent from my HTCSensation using Tapatalk
EmporerD said:
@JJeamy
So I tried to remove the temproot by running the temproot-remove batch file, it didn't do anything so I downloaded the PG58IMG.zip and updated it in the bootoader, now phone is stuck in a bootloop...?
Update: I tried to continue with flashing the custom recovery, but the dialog just gets stuck on "waiting for device" ...
Bootloader now reads:
-Firmware-3.33-
Pyramid PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
Click to expand...
Click to collapse
You are on the right path my friend you flashed 3.33 firmware so you hboot version is 1.27 that's way you experiance bootloop , because you have gb rom with ics hboot, so next step is to flash custom recovery!
To do that you need to have SDK files downloaded (Fastboot , adb files) and when you have that in the folder you got the files you copy your recovery img and that you open command window from there and you get your phone to fastboot (bootloader that fasboot) , that you write the command in the command window fasboot flash recovery recovery.img and you are done!
EDIT: here is guide how to find fastboot and Adb files you need http://forum.xda-developers.com/showthread.php?t=1152148
and for flasing custom recovery follow this guide step 2 flashing recovery http://forum.xda-developers.com/showthread.php?t=1631861
after that flash rom
and when you flash your first rom do format everything except sd card before flashing, (and make sure the first rom you flash is not kitkat because you may experiance difficulties when flashing)
So I managed to get recovery going, and I flashed CM 11 with 4.4 with no issue. : D
@Mile_zdr
@JJeamy
THANKYOU so much. You guys are awesome/