I'm running Viper Xl and want to go to aokp_evita_jb-mr1_milestone-2. When I try to flash the zip I get the following:
Finished running boot script.
installing '/sdcard/aokp_evita_unofficial_2013-0708.zip'...
checking for MD5 file...
skipping MD5 check: no MD5 file found
assert failed: getprop("ro.bootloader") == "2.14.00"
E:Error executing updater binary in zip '/sdcard/aokp_evita_jb-mr1_milestone-2
Error flashing zip '/sdcard/aokp_evita_jb-mr1_milestone-2.zip'
Updating partition details
Failed
I'm using TWRP, 2.6.0. Any help? Do I need to use Clockworkmod??
Marc A.
EVITA PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.14.0000
RADIO-0.24P 32.09.06
OpenDSP-v34.1.0.45.1219
eMMC-boot
Nov 26 2012, 18:37:14:-1
TWRP 2.6 is fine. Are you sure you have the 2.14 hboot? The installer is cancelling because it can't find the 2.14 hboot.
Sent from my Evita
Sorry. I checked. I'm on 2.15. How do I get to 2.14?
Marc
You need to run the 3.18 RUU, this includes the 2.14 hboot plus other components which are required.
Sent from my Evita
timmaaa said:
You need to run the 3.18 RUU, this includes the 2.14 hboot plus other components which are required.
Sent from my Evita
Click to expand...
Click to collapse
Since I'm a noob I have to ask...will this put me back to unrooted? Are there any side effects to doing this?
Marc
It will return the phone to a completely stock state, including ROM and recovery, so you will not have root. But your bootloader will remain unlocked so all you'll need to do is flash TWRP recovery again, then you can flash the rooted ROM of your choice, being AOKP in this case.
Sent from my Evita
timmaaa said:
It will return the phone to a completely stock state, including ROM and recovery, so you will not have root. But your bootloader will remain unlocked so all you'll need to do is flash TWRP recovery again, then you can flash the rooted ROM of your choice, being AOKP in this case.
Sent from my Evita
Click to expand...
Click to collapse
Worked like a charm! You da man!
Related
Hello, members )
My story:
Since i never liked HTC Sense i tried to migrate to Cyanogen.
I performed the following steps:
1. Bootloader was unlocked with HTC site.
2. 4ExtRecovery installed.
3. Cyanogen "update-cm-7.1.0-DesireS-signed" was installed via 4Ext from sd card.
Now phone stucks at HTC logo. Access to bootmenu, recovery is available.
I tried to flash RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed.exe but it ends with an error.
Phone data:
***UNLOCKED***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
Any chance to recover phone functionality?
Thanx in advance.
d.vv said:
Hello, members )
My story:
Since i never liked HTC Sense i tried to migrate to Cyanogen.
I performed the following steps:
1. Bootloader was unlocked with HTC site.
2. 4ExtRecovery installed.
3. Cyanogen "update-cm-7.1.0-DesireS-signed" was installed via 4Ext from sd card.
Now phone stucks at HTC logo. Access to bootmenu, recovery is available.
I tried to flash RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed.exe but it ends with an error.
Phone data:
***UNLOCKED***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
Any chance to recover phone functionality?
Thanx in advance.
Click to expand...
Click to collapse
Have you made a backup of your previous ROM? If not try one of the custom sense roms or run the ruu without attached device, don't close the first window and search for the rom.zip, copy it to another folder and delete everything in the zip file except the system.img, rename it to pg88img.zip and flash it in bootloader or flash the image itself with fastboot.
As much as I know is your problem that with htcdev the kernel isn't unlocked and cause cyanogen needs another then sense, it doesn't work.
Swyped from my Desire S
flashed pg88img.zip via bootloader. no effect, still hangs on white HTC logo screen (
d.vv said:
flashed pg88img.zip via bootloader. no effect, still hangs on white HTC logo screen (
Click to expand...
Click to collapse
Have you tried a factory rest?
Swyped from my Desire S
d.vv said:
Phone data:
***UNLOCKED***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
.
Click to expand...
Click to collapse
first thing you should do is to go s-off, then you can install custom roms.
Jahai said:
first thing you should do is to go s-off, then you can install custom roms.
Click to expand...
Click to collapse
He's unlocked by htc dev
You can also try flashing the full package with all content from the rom.zip, but this sets also your unlocked state of the bootloader back and be sure that you use the latest version of the ruu.
Swyped from my Desire S
seems like RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30. 0822U_3822.10.08.04_M_release_219480_signed.exe is te latest but it ends with an error.
I have already tried a few roms, but the result is the same HTC logo screen
Tectas said:
He's unlocked by htc dev
Click to expand...
Click to collapse
yes, but as he wrotes he still is s-on.
d.vv said:
Hello, members )
My story:
Since i never liked HTC Sense i tried to migrate to Cyanogen.
I performed the following steps:
1. Bootloader was unlocked with HTC site.
2. 4ExtRecovery installed.
3. Cyanogen "update-cm-7.1.0-DesireS-signed" was installed via 4Ext from sd card.
Now phone stucks at HTC logo. Access to bootmenu, recovery is available.
I tried to flash RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed.exe but it ends with an error.
Phone data:
***UNLOCKED***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
Any chance to recover phone functionality?
Thanx in advance.
Click to expand...
Click to collapse
Check out this post.
http://forum.xda-developers.com/showpost.php?p=19071114&postcount=37
You need to manually flash the boot.img from CM 7.1 when you have the unlocked bootloader.
tpbklake said:
Check out this post.
http://forum.xda-developers.com/showpost.php?p=19071114&postcount=37
You need to manually flash the boot.img from CM 7.1 when you have the unlocked bootloader.
Click to expand...
Click to collapse
Thanx for the help )
But i dont have cyanogen anymore since i tried to flash other roms.
Shall i install CM rom via 4extrecovery and then flash boot.img in fastboot?
I am ready to get back Sense because now nothing works (
Mr tpbklake , you do the magic!!
Everything works thanx!!
So,
1. CM rom was flashed in 4EXT
2. /boot was formatted
3. fastboot flash boot boot.img was performed (boot.img from the same rom)
I used One_X_All-In-One_Kit_v1.0 to install CWM then stupidly (I admit) and
drunkenly (I'm ashamed to admit) wiped data without creating a restore
point and when I flash custom ROMs and reboot my device freezes on the HTC
boot screen.
I've managed to locate my CID & MID (cid: ORANG001 & mid: PG5813000) and
have added them to the android-info.txt located in PG58IMG.zip but when I
boot into bootloader and select fastboot the update is found but parsed
rather than flashed.
Some additional information:
HTC Sensation
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
eMMC-boot
Aug 2 2011, 22:35:52
Bit of a mess really. Any ideas?
If you've installed CWM for a different phone and wiped, then you're lucky it still works at all.
Install the right version of CWM right now.
IIBORNII said:
I used One_X_All-In-One_Kit_v1.0 to install CWM then stupidly (I admit) and
drunkenly (I'm ashamed to admit) wiped data without creating a restore
point and when I flash custom ROMs and reboot my device freezes on the HTC
boot screen.
I've managed to locate my CID & MID (cid: ORANG001 & mid: PG5813000) and
have added them to the android-info.txt located in PG58IMG.zip but when I
boot into bootloader and select fastboot the update is found but parsed
rather than flashed.
Some additional information:
HTC Sensation
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
eMMC-boot
Aug 2 2011, 22:35:52
, of a mess really. Any ideas?
Click to expand...
Click to collapse
It appears that you are HTC Dev unlocked. Because of that you will have to flash the boot.img via fastboot commands. Go to this guide to learn
how to do it.
But your Hboot version is supported by Revolutionary so I suggest you re lock your bootloader and then use Revolutionary to S-off your device before flashing the 3.32 firmware you will have to flash for any ICS ROM. Cause without you being S-off you will not be able to revert your firmware version. Plus if you are S-off your recovery can flash everything and you will not have to use fastboot to or Smart flash option in 4EXT.
I'm surprised your phone still works after using the One X method to root; considering the One X is a different phone.
Here the thread http://forum.xda-developers.com/showthread.php?t=1192300 for reference to S-Off and stuff. I recommend you change you change your CID to 11111111 as well.
Change your recovery to 4EXT. Better in my perspective.
Firstly, thank you Rusty!, T-Macgnolia and You_got_owned123.
So, I've downloaded 4EXT recovery and will flash it and I understand that I need to be S-OFF before I can flash new firmware and if I change to Super CID I can flash any carriers firmware. But.... I need to be able to boot the phone to enable HTC Sync to run Revolution. Or is there a way to run it in Fastboot usb?
As soon as I achieved S-OFF I can change to SuperCID.
BOOM!
Okay... so, I flashed 4EXT recovery (which is much better that ClockworkMod) then flashed a Gingerbread ROM (Android_Revolution_HD-Sensation_3.6.13) as it was compatible with my existing firmware and flashed the boot.img for the 1.56 kernel then used Revolutionary tool to achieve S-OFF so I could flash an ICS ROM (Sensation_3.32.401.5_odexed), GAPPS and update the firmware. I didn't SuperCID as I knew the firmware was compatible but may do that later while it's fresh in my mind.
That wasn't so hard, phew!!!
IIBORNII said:
Okay... so, I flashed 4EXT recovery (which is much better that ClockworkMod) then flashed a Gingerbread ROM (Android_Revolution_HD-Sensation_3.6.13) as it was compatible with my existing firmware and flashed the boot.img for the 1.56 kernel then used Revolutionary tool to achieve S-OFF so I could flash an ICS ROM (Sensation_3.32.401.5_odexed), GAPPS and update the firmware. I didn't SuperCID as I knew the firmware was compatible but may do that later while it's fresh in my mind.
That wasn't so hard, phew!!!
Click to expand...
Click to collapse
Haha, good job. Just make sure you use the approperiate firmware when flashing ICS ROMS. ICS require a different firmware than GB does.
Unlocked and rooted (or so I think) One SV (Boost). Can't flash anthing to it. Tried JB Stock Rom from Old Splatterhand but it won't flash (CWM). Getting Error in zip file (status 0) Installation aborted. Tried TWRP but it just loops. I REALLY need to get this up and running Wednesday, leaving for a trip and need phone. Can anyone help?
K2_CL PVT SHIP S-on RL
HBOOT-1.01.0000
RADIO-1.12.50.0115
Open DSP-v7.2.0221
EMMC boot
Jan 16, 2013
Did u try to wipe everything in your recovery?
Sent from my HTC One SV using xda app-developers app
Your still s-on
This means you have to flash the boot.img via fastboot with a computer
So I recently purchased the T-Mobile version of the HTC-Sensation... since then I've been trying to flash a custom JellyBean ROM onto my device. I've rooted and flashed custom roms on previous phones but the process for this one has been extremely confusing. I've been mainly following this tutorial: http://forum.xda-developers.com/showthread.php?t=1864053 I have the bootloader unlocked and I think I have S-Off, now I'm trying to flash a recovery image with the KSG utility but gives me a bunch of error messages that say FILE NOT FOUND - FASTBOOT.LOG and ACCESS DENIED and FILE NOT FOUND - ABD.LOG. I'm sorry if this is in the forum somewhere, but I've been working on this for hours and I can't figure this out. Any help would be greatly appreciated.
Additional Details: I'm running Android 2.3.4
When I boot into the bootloader it says
*** UNLOCKED ***
Pyramid PVT SHIP S-OFF RL
HBOOT-1.18.0000
RADIO-11.23.3504.07_M2
eMMC-boot
Aug 2 2011,22:35:52
EmporerD said:
I recently purchased the T-Mobile version of the HTC Sensation 4G and I've been following this tutorial: http://forum.xda-developers.com/showthread.php?t=1864053 to get it rooted with the intention of installing a custom Jellybean rom on my phone. I unlocked the bootloader but got stuck trying to S-off. Everything was going fine until the part where I run the temp_root.bat because I cannot get HTC sync to recognize my phone no matter what I try. I was wondering if anyone had the original version that came on the SD card or if there is a way to gain S-off without using HTC sync? Or can I get Jellybean without gaining S-off? Any help would be greatly appreciated, I'm pretty new this and feeling way in over my head here.
Additional Details: I'm running Android 2.3.4
When I boot into the bootloader it says
*** UNLOCKED ***
Pyramid PVT SHIP S-OFF RL
HBOOT-1.18.0000
RADIO-11.23.3504.07_M2
eMMC-boot
Aug 2 2011,22:35:52
Click to expand...
Click to collapse
You are already s-off ,if you want to flash custom Rom flash 3.33 universal firmware (be careful when flashing check the md5 sum) after that flash 4ext recovery and flash new rom
Edit here is link for 3.33 firmware. http://forum.xda-developers.com/showthread.php?t=1459767.
sent from HTC Sensation 4G
@EmporerD
first you don't need a htc sync..
second your phone is already success s-off..you can see that in your bootloader state..
now i think maybe you already forgot the step to remove temp root from your phone after success s-off process..you can do that by running temp_root_remove.bat from the guide that you follow above..
after you had remove temp root from your phone..then you can continued to flashing a 3.33 firmware.. to do that..
just download firmware file from here....then copied that PG58IMG.zip file to the root directory of your sd card (the root directory mean is don't place it that file in any folder..just place it in your sdcard) you can copied that file with card reader..after that just put in back your sd card to the phone...then boot into bootoader..and wait until bootloader check it that file then ask you to updating it...just confirm it yes with vol up button..then wait until finish and ask you to confirm reboot with press power button..
after that you can continued installing custom recovery..
just download custom recovery.img file from here and extracted that zip file then copied that recovery.img file to your adb/sdk folder (the same place as your adb.exe and fastboot.exe folder)..then you flashing it through FASTBOOT with fastboot command "fastboot flash recovery recovery.img"..done..now your phone already had a custom recovery..that are can installing any custom rom...
hope this help..
THANKYOU guys. This helps a lot. I'm going to call it a night for a now, but I will try your advice tomorrow and post updates.
@JJeamy
So I tried to remove the temproot by running the temproot-remove batch file, it didn't do anything so I downloaded the PG58IMG.zip and updated it in the bootoader, now phone is stuck in a bootloop...?
Update: I tried to continue with flashing the custom recovery, but the dialog just gets stuck on "waiting for device" ...
Update 2: Installing the older drivers for fixed the problem of flashing the recovery so my recovery works but it's still stuck in bootloop. Unfortunately I will probablyrun out of time before I can get a custom ROM flashed, but thanks everyone for your help I will update my progress later.
Bootloader now reads:
-Firmware-3.33-
Pyramid PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
EmporerD said:
@JJeamy
So I tried to remove the temproot by running the temproot-remove batch file, it didn't do anything so I downloaded the PG58IMG.zip and updated it in the bootoader, now phone is stuck in a bootloop...?
Click to expand...
Click to collapse
So you mean that you already had 3.33 firmware right...?
so you can continued installing custom recovery like what i told you above...then after that you can continued installing custom rom that you want...
Sent from my HTCSensation using Tapatalk
EmporerD said:
@JJeamy
So I tried to remove the temproot by running the temproot-remove batch file, it didn't do anything so I downloaded the PG58IMG.zip and updated it in the bootoader, now phone is stuck in a bootloop...?
Update: I tried to continue with flashing the custom recovery, but the dialog just gets stuck on "waiting for device" ...
Bootloader now reads:
-Firmware-3.33-
Pyramid PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
Click to expand...
Click to collapse
You are on the right path my friend you flashed 3.33 firmware so you hboot version is 1.27 that's way you experiance bootloop , because you have gb rom with ics hboot, so next step is to flash custom recovery!
To do that you need to have SDK files downloaded (Fastboot , adb files) and when you have that in the folder you got the files you copy your recovery img and that you open command window from there and you get your phone to fastboot (bootloader that fasboot) , that you write the command in the command window fasboot flash recovery recovery.img and you are done!
EDIT: here is guide how to find fastboot and Adb files you need http://forum.xda-developers.com/showthread.php?t=1152148
and for flasing custom recovery follow this guide step 2 flashing recovery http://forum.xda-developers.com/showthread.php?t=1631861
after that flash rom
and when you flash your first rom do format everything except sd card before flashing, (and make sure the first rom you flash is not kitkat because you may experiance difficulties when flashing)
So I managed to get recovery going, and I flashed CM 11 with 4.4 with no issue. : D
@Mile_zdr
@JJeamy
THANKYOU so much. You guys are awesome/
Hi All
I tried to S-OFF my wife's phone and screwed up big time!
Long story short, I have now access only to Bootloader and Recovery (TWRP 2.5.0.0).
I can't install any rom, can't boot up the phone.
I thought I can RUU and then start everything over (CID, root, S-OFF) but I can't find RUU to download.
Besides - is that a good idea or maybe I can try something else?
Her phone was rooted, CID but no S-OFF.
Now, when I try to install Rom, it fails every time. I think something got messed up in the partitions but I'm not 100% sure.
Any suggestions?
What are your bootloader details? Have you read the Evita FAQ thread and the How-To Guide For Beginners thread? Both links are in my signature.
Sent from my Evita
Thank you for your reply
timmaaa said:
What are your bootloader details? Have you read the Evita FAQ thread and the How-To Guide For Beginners thread? Both links are in my signature.
Sent from my Evita
Click to expand...
Click to collapse
Bootloader shows this:
*** TAMPERED ****
*** UNLOCKED ****
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19as.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
No matter what I do, I can't install any ROM.
When trying to flash ROM through TWRP, it fails all the time, no matter what ROM I'm trying.
When I tried to RUU, it also failed.
Edit:
When trying to wipe from recovery cache, dalvik, system - I'm getting Failed
When trying to install CleanRom 5.1 & 7 - I'm getting Failed.
I have no idea what else I can try.
When I'm rebooting from recovery to bootloader, I'm getting a message that no OS is installed and the my device does not appear to be rooted.
Update your TWRP version to 2.6. TWRP 2.5 caused a lot of issues, if I remember properly.
redpoint73 said:
Update your TWRP version to 2.6. TWRP 2.5 caused a lot of issues, if I remember properly.
Click to expand...
Click to collapse
Thank you very much.
After changing TWRP to 2.6, I was able to install CleanRom 5.1 and S-OFF.
Thanks again
New issue now...
Hi again all
I'm having another issue now with the phone after I'm S-OFF.
I can install CleanRom 7 and it's working.
I wanted to install CM10.2.1 but I can't.
When I'm trying to install it, the second I select the file, I get FAILED in red.
error message : assert failed: getprop(ro.product.device") == E:Error executing updater binary in zip, error flashing zip cm-`0.2.1-evita updating partition details...
Any ideas guys?
Thank you very much
Your firmware is too old, you need to run the 3.18 RUU to upgrade it. That information is readily available in the CM thread, please search before posting in future.
Sent from my Evita