Database Info

Odin Error

I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH

[email protected] said:
I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH
Click to expand...
Click to collapse
Dont flash pit file if u only have 1 package firmware file.
go find atleast 3 files package firmware and reflash. I dun know which is for DD...region, for me is DXKE1.
Pit file will repartition you phone, so you lost your recovery partition.
Sent from my GT-I9003 using Tapatalk

So, i put a ROM in it with 3 files with PIT, And Then i put the 1 file without PIT and re-partition unchecked...?? Correct.??
1 Q have i lost my USB Data by re-partitioning.?

Flash pit>boot to download mode>flash stock rom>done
Cheers
Sent from my GT-i9003 powered by VurrutRom

Getting this and a FAIL with red background and in phone download stuck at almost 100%
Flashing XXKPE.....
RE-trying download.....
Tried Checking Phone Bootloader Update....no progress......
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> normalboot.img
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> system.rfs
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..

crk1995 said:
u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..
Click to expand...
Click to collapse
isnt that russian firmware.?

Kpe should be ok. Try flash using diffrent odin version. Try v1.85, it is ok to me or v1.83 from sammobile.
If fail. Try use different usb port.
But first. Uninstall and reinstall the samsung driver.
Sent from my GT-I9003 using Tapatalk 2 Beta-4

Excluding the bootloader file...(XXKPE) dide the trick now my phone works....updating via Kies.....now

[Stock][ROM][Odin] Galaxy Y Pro GT-B5510 firmware packages

Flashable Firmware Packages for the Galaxy Y Pro GT-B5510 Enjoy !
Temporary if your phone is bricked: http://lmgtfy.com/?q=GT-B5510+Odin+firmware+download
you can find the firmware on google!
I will update this thread as soon as possible
GT-B5510 Odin firmware download

Tutorial:
1. Start ODIN
2. Turn of your phone so that to go to Download Mode. The download mode can be entered by pressing Volume down Key + OK button, and holding both simultaneously press the Power Button.
2. Choose PDA and select the downloaded File (SS_DL.dll not needed 'delete it')
3. Leave everything as it is and click 'Start'
4. On your phone follow instructions after flashing is complete
Odin download: Odin

Press thanks if it helped you Thanks in advance

fail!
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!

who pass?

djbasspower said:
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!
Click to expand...
Click to collapse
That's weird I got those form sammobile maybe that's the problem I think you need to use this tool in order to work: http://forum.xda-developers.com/showthread.php?t=1611225 I am sorry I tought these package were working but if no one passes then I need to remove this thread.
But anyway did you download my odin and followed my instructions 100%?
Also don't use PIT or tik anything else just do what I said in the tutorial

And sorry I added a line to tutorial forget to say that you need to enter download mode first but I think you did that ?

GianniDPC said:
Tutorial:
1. Start ODIN
2. Turn of your phone so that to go to Download Mode. The download mode can be entered by pressing Volume down Key + OK button, and holding both simultaneously press the Power Button.
2. Choose PDA and select the downloaded File (SS_DL.dll not needed 'delete it')
3. Leave everything as it is and click 'Start'
4. On your phone follow instructions after flashing is complete
Odin download: Odin
Click to expand...
Click to collapse
i did it exactly as above... fails to write every time
i tried with every usb port i have but it doesn't work...

djbasspower said:
i did it exactly as above... fails to write every time
i tried with every usb port i have but it doesn't work...
Click to expand...
Click to collapse
Ok do you have KIES installed if not Install it (Maybe reinstall it)
Make sure KIES is closed when ODIN is opened (another thing I recommend to do is go to recovery on your phone and wipe data factory reset and wipe cache) Then try again

Hi, i just bought a new Galaxy y pro.
I'm Italian and my current fimware is XXKJ4 ...
I want update it but kies doesn't find my phone, i try to reinstall kies, with another PC but is the same...
What is the lastest or the best firmware for this phone?
Also, when i try to flash with Odin, give me a FAIL
Please, help me ! thanks

I have the answer for the problem!
Ok everybody these firmwares are no ready to use with ODIN, that's the problem. You need to convert these KIES firmware to ODIN ready to flash files with Doky73's tool --> SplitFUS2 or request him the firmware in this threat.
And please don't forget to say thanks to Doky and me

Which ROM to use for a B5510 bought in Czech Republic?

djbasspower said:
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!
Click to expand...
Click to collapse
I ran into this thread and tried the same thing. After much searching, I found references to this thread and/or this tool to use. It looks like the problem with this firmware is it is all in one package, and needs to be split. See the links below:
http://forum.xda-developers.com/showthread.php?p=26251171 - look at reply #6
http://fahmi1597.blogspot.com/2012/08/android-how-to-split-onepackage.html - how to split a .tar.md5 file into the subpackages, if it is all in one.
---------- Post added at 01:02 AM ---------- Previous post was at 12:29 AM ----------
pshaww said:
I ran into this thread and tried the same thing. After much searching, I found references to this thread and/or this tool to use. It looks like the problem with this firmware is it is all in one package, and needs to be split. See the links below:
http://forum.xda-developers.com/showthread.php?p=26251171 - look at reply #6
http://fahmi1597.blogspot.com/2012/08/android-how-to-split-onepackage.html - how to split a .tar.md5 file into the subpackages, if it is all in one.
Click to expand...
Click to collapse
I can confirm it works fine using Odinatrix (from the second link above. I used the firmware mentioned in this thread. (by the way, the OP didn't mention it is password protected - password is 'android'). I let Odinatrix split up the firmware - super easy to use, just follow the instructions in the second link above.
I then flashed CSC, MODEM, and PDA - nothing else. I didn't repartition - just left at auto reboot and f. reset time. Now flashed fine and is restarting.

AN ADVICE
Hello sir...maybe your tutorial will be better if you can give us some photos/ScreenShots of flashing steps...
:highfive:

aligh9 said:
Thanks a lot
This is what you wanted:
PDA: B5510JPLI1
PHONE: B5510XXLH3
CSC: B5510OJPLF1
Sent from my GT-B5510 using Tapatalk 2
Click to expand...
Click to collapse
@OP.. I am asking in place of him as he still doesnt have 10 posts to post here.. Can you please kindly upload U.A.E firmware B5510OJPLF1 which is available in samfirmware.com.. Thank you..

Sorry, but rom with Italian language ?

These firmwares are not flashable with Odin (Gives you an error) search the Internet for the right packages (you should succeed I fixed a friend his Galaxy Y Pro with that)
EDIT: I will try to update this thread even if I have a Xperia Mini now.

why is this in s5360 thread? :laugh:

zenxus31 said:
why is this in s5360 thread? :laugh:
Click to expand...
Click to collapse
well, you can report it..
Its in sgy section because all variants of sgy like duos , pro duos, pro come under sgy section.. so.. I guess it can be moved to duos development section.. but no harm if its here..
____________________________________
“If you wait to do everything until you’re sure it’s right, you’ll probably never do much of anything.” –Win Borden

i Tried flashing My galaxy Y pro with ODIN but it keeps Stucking i recovery img all the time, tried different ports and only 1 worked
is there any help ?

[Q] Need to downgrade to 4.0.3

I need to downgrade my Galaxy Tab 10.1 (10 inch) from 4.2.2 to 4.0.3 because i need to debug an app on that particular version. Can someone please advice? I am new to all this - but this is what I have learned from browsing this forum:
(1) I will have to root my device
(2) I need the ROM for 4.0.3
(3) I will also need 0din
Anyways, I will appreciate if someone can help me out with instructions and downloads - that will be really helpful.
Thanks!

kaarigar said:
I need to downgrade my Galaxy Tab 10.1 (10 inch) from 4.2.2 to 4.0.3 because i need to debug an app on that particular version. Can someone please advice? I am new to all this - but this is what I have learned from browsing this forum:
(1) I will have to root my device
(2) I need the ROM for 4.0.3
(3) I will also need 0din
Anyways, I will appreciate if someone can help me out with instructions and downloads - that will be really helpful.
Thanks!
Click to expand...
Click to collapse
Download 4.0.3 from tsar3000 and for odin google it. Download pit files from tsar3000 and flash new rom from odin.
---------- Post added at 10:51 PM ---------- Previous post was at 10:50 PM ----------
-SAM- said:
Download 4.0.3 from tsar3000 and for odin google it. Download pit files from tsar3000 and flash new rom from odin.
Click to expand...
Click to collapse
Root is not needed

-SAM- said:
Download 4.0.3 from tsar3000 and for odin google it. Download pit files from tsar3000 and flash new rom from odin.
---------- Post added at 10:51 PM ---------- Previous post was at 10:50 PM ----------
Root is not needed
Click to expand...
Click to collapse
Thanks for quick reply. I did find the 4.0.3 downloads but I don't see one for the US. Does it matter which one I install?
Update: Oops - I don't find 4.0.3 download for P5113.

Easy dude no root needed as you are going to downgrade to official ICS 4.0.3 and there's no problem in downloading other country Firmware
You can download the ROM from SamMobile, here's the link for it but it's for GSM Version the P5100 if you're wifi version DON'T DOWNLOAD you can search it in Sammobile you'll find it (UK Version) : http://terafile.co/b1925899596b/P5100XWBLF1_P5100BTUBLF1_BTU.zip
make sure you have the latest usb drivers , you can download it from here :http://forum.xda-developers.com/showthread.php?t=2038555
and you can download Odin from here : http://forum.xda-developers.com/showthread.php?t=2189539
Then Extract the Firmware and then Check F.Reset Time and Auto-Reboot Make Sure Re-Partition isnot Checked and then Click PDA on ODIN and Select the extracted tar.md5 file and Click Start then wait for it to finish then you're done downgrading

Hassan 4 said:
Easy dude no root needed as you are going to downgrade to official ICS 4.0.3 and there's no problem in downloading other country Firmware
You can download the ROM from SamMobile, here's the link for it but it's for GSM Version the P5100 if you're wifi version DON'T DOWNLOAD you can search it in Sammobile you'll find it (UK Version) : http://terafile.co/b1925899596b/P5100XWBLF1_P5100BTUBLF1_BTU.zip
make sure you have the latest usb drivers , you can download it from here :http://forum.xda-developers.com/showthread.php?t=2038555
and you can download Odin from here : http://forum.xda-developers.com/showthread.php?t=2189539
Then Extract the Firmware and then Check F.Reset Time and Auto-Reboot Make Sure Re-Partition isnot Checked and then Click PDA on ODIN and Select the extracted tar.md5 file and Click Start then wait for it to finish then you're done downgrading
Click to expand...
Click to collapse
Thanks, Hassan. It seems that the link to download the USB drivers form that the post you pointed out has been removed, ny other place I can download from?

kaarigar said:
Thanks, Hassan. It seems that the link to download the USB drivers form that the post you pointed out has been removed, ny other place I can download from?
Click to expand...
Click to collapse
Well, finally I managed to flash the ROM. It went well till end - then it gave the error, as I have pasted below.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XWBLE4_P5100BTUBLE1_P5100XXLE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advise?

kaarigar said:
Well, finally I managed to flash the ROM. It went well till end - then it gave the error, as I have pasted below.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XWBLE4_P5100BTUBLE1_P5100XXLE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advise?
Click to expand...
Click to collapse
Well, it seems I am in deeper trouble now - the tablet displays the dreaded "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried the recovery mode in Kies - it says that "GT-P5113 does not support initializing."
I tried through 0din too - but even it doesn't do anything to fix this situation.
Looks like that I am now stuck forever with this issue. Can some one please help me out?

kaarigar said:
Well, it seems I am in deeper trouble now - the tablet displays the dreaded "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried the recovery mode in Kies - it says that "GT-P5113 does not support initializing."
I tried through 0din too - but even it doesn't do anything to fix this situation.
Looks like that I am now stuck forever with this issue. Can some one please help me out?
Click to expand...
Click to collapse
Try flash recovery first for your devices, then try to flash the rom again.

[Q] Galaxy S6 Bootloop Help

First time poster on here, long story short, I tried to root a Galaxy S6 sm-g920f with cf-auto-root. However, that put the phone into a bootloop. I have since downloaded the official g920f patch and it always FAILS right at the end after it says radio. It then stays on downloading screen. Anyone know how to fix this?
Any help is much appreciated.

Flash with stock ROM via odin.

arhjay said:
First time poster on here, long story short, I tried to root a Galaxy S6 sm-g920f with cf-auto-root. However, that put the phone into a bootloop. I have since downloaded the official g920f patch and it always FAILS right at the end after it says radio. It then stays on downloading screen. Anyone know how to fix this?
Any help is much appreciated.
Click to expand...
Click to collapse
Donwload stock rom from Sammobile.com and flash it via Odin / Download mode.

roydok said:
Flash with stock ROM via odin.
Click to expand...
Click to collapse
That's what I've been trying to do but it comes up fail still.
Tried another and it failed at writing NAND

With the sammobile one it gets stuck at SetupConnection
Screenshot below ( can;t post links yet
i . gyazo . com/96ec1ff68247a625c65fdd1b45ad138a.png

<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOE3_G920FBTU1AODQ_G920FXXU1AOE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1005)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thats the sammobile stock rom

When trying to flash I get this message in red on download mode screen.
SW REV. CHECK FAIL. DAVICE: 2 BINARY: 1

Try changing ports from USB 2.0 to USB 3.0. Repeat flash as many times until you succeed. Took me 13x 1st time I flash 5.1.1.

roydok said:
Try changing ports from USB 2.0 to USB 3.0. Repeat flash as many times until you succeed. Took me 13x 1st time I flash 5.1.1.
Click to expand...
Click to collapse
Ok, going to try that now, thanks for the reply

This will come to Pass.

roydok said:
This will come to Pass.
Click to expand...
Click to collapse
Turns out my computer doesnt have usb 3... However, now I get stuck at SetupConnection
May try using jodin on macbook
EDIT: Getting the same nand write error now again

Ok, so after trying to reflash with AutoRoot it gets stuck on the start up splash "Samsung Galaxy s6 powered by android). At the top it says "RECOVERY IS NOT SEANDROID ENFORCING"
Please help

Try using another micro USB cable.

Can't flash stock rom

Hi developers
I got a samsung GT-I8262 from my uncle. When power on it shows 'Firmware upgrade encountered an issue. Please select recovery mode in kies & try again'. I can't connect my devices to kies. I can't even get in recovery mode of my devices.
Then I tried to flash stock rom through odin. But it shows:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8262XXBNC1_I8262ODDNC1_I8262DDNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> boot.img
<ID:0/009> NAND Write Start!!
<ID:0/009> recovery.img
<ID:0/009> system.img.ext4
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
I tried many roms but it wont install. All of them failed after ' <ID:0/009> system.img.ext4 '.
I tried to flash PIT file for my devices. But nothing happens to my devices.
Then I tried to flash TWRP recovery through odin. Odin shows Pass message but in my phone screen it shows 'secure: signature verification failed.
Guys please help me to solve this problem.
Hopefully.

okay, just want you to check:-
You are flashing the latest version of the software with correct country specified version.
You are using proper USB cables.(sometimes flashing the ro isnt possible in some types of usb cables) so use a different one.
Can you please link down the version of TWRP you are flashing.
Also dont flash any custom rom randomly as most of them are made to be installed through recovery and not flashed via odin.
Make sure you have setup all the necessary drivers of Samsung to flash the ROM. just search through the forum, u will find some more detailed solutions. Dm me if you cant find.

TheWarrior01 said:
okay, just want you to check:-
You are flashing the latest version of the software with correct country specified version.
You are using proper USB cables.(sometimes flashing the ro isnt possible in some types of usb cables) so use a different one.
Can you please link down the version of TWRP you are flashing.
Also dont flash any custom rom randomly as most of them are made to be installed through recovery and not flashed via odin.
Make sure you have setup all the necessary drivers of Samsung to flash the ROM. just search through the forum, u will find some more detailed solutions. Dm me if you cant find.
Click to expand...
Click to collapse
I brought this phone from India. There are two Indian rom available for this device. I tried both but got error on my first post.
I tried many USB cables but it won't work.
I don't know the version of TWRP. But I searched TWRP for my device and downloaded it.
I installed all necessary drivers.
Guys please help me!!!!!

Recovery mode is accessed by buttons, so I don't get how u are not able to boot into recovery mode of u are able to put it phone on download mode.

TheWarrior01 said:
Recovery mode is accessed by buttons, so I don't get how u are not able to boot into recovery mode of u are able to put it phone on download mode.
Click to expand...
Click to collapse
I can get in download mode. But can't get in recovery mode. When I press power button+home button+volume up button, it again shows 'Firmware upgrade encountered an issue. Please select recovery mode in kies & try again'.

Anybody please help me!!!