Database Info

Odin Error

I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH

[email protected] said:
I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH
Click to expand...
Click to collapse
Dont flash pit file if u only have 1 package firmware file.
go find atleast 3 files package firmware and reflash. I dun know which is for DD...region, for me is DXKE1.
Pit file will repartition you phone, so you lost your recovery partition.
Sent from my GT-I9003 using Tapatalk

So, i put a ROM in it with 3 files with PIT, And Then i put the 1 file without PIT and re-partition unchecked...?? Correct.??
1 Q have i lost my USB Data by re-partitioning.?

Flash pit>boot to download mode>flash stock rom>done
Cheers
Sent from my GT-i9003 powered by VurrutRom

Getting this and a FAIL with red background and in phone download stuck at almost 100%
Flashing XXKPE.....
RE-trying download.....
Tried Checking Phone Bootloader Update....no progress......
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> normalboot.img
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> system.rfs
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..

crk1995 said:
u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..
Click to expand...
Click to collapse
isnt that russian firmware.?

Kpe should be ok. Try flash using diffrent odin version. Try v1.85, it is ok to me or v1.83 from sammobile.
If fail. Try use different usb port.
But first. Uninstall and reinstall the samsung driver.
Sent from my GT-I9003 using Tapatalk 2 Beta-4

Excluding the bootloader file...(XXKPE) dide the trick now my phone works....updating via Kies.....now

Can't get into download mode. Tablet only shows a phone, a triangle and a computer...

I can't get download mode.
My tablet was off... when I turned on, was on a bootloop. I couldn't get into recovery, then I've enter into download mode. I tried to flash a stock rom, but odin failed.
Then I lost download mode and the tablet only shows a phone, a triangle and a computer.
When I plug to charger, doesn't shows the battery icon, but battery charges.
Maybe this is a brick?...
Thanks!

help
ofwise said:
I can't get download mode.
My tablet was off... when I turned on, was on a bootloop. I couldn't get into recovery, then I've enter into download mode. I tried to flash a stock rom, but odin failed.
Then I lost download mode and the tablet only shows a phone, a triangle and a computer.
When I plug to charger, doesn't shows the battery icon, but battery charges.
Maybe this is a brick?...
Thanks!
Click to expand...
Click to collapse
I might not be able to help but you can, can you let us know what ROM/recovery/what you were doing before you turned off your tab and anything else you can think of that may be relevant
Thanks

It's download mode with a different interface Reflash your Tab, use Odin.

I've installed cyanogen 10.1 RC without problems. The tablet worked fine. Then I plugged the tablet to charge. When I took again the tablet (after 10 hours more or less) it was off.
In this mode (triangle, computer, phone), I'm trying flashing a stock rom. Without pit file, odin fails saying "write error", and with pit file and repartion checkbox marked sais "there's no pit partition".
Only way to turn off the tablet is quitting the battery. When I put again the battery, the tablet still is off; but when I try to turn on/get into download mode/get into recovery... only shows the triangle, phone and computer screen...
I think that my galaxy tab is bricked... :crying:
Sorry about my bad english and thanks for your answers.

Odin shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XWALD2_P3100OXXALE2_P3100XXLD4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

ofwise said:
Odin shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XWALD2_P3100OXXALE2_P3100XXLD4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try heimdall. Never tried by myself flashing system partition using it but work for recovery, boot, and param partition.

ofwise said:
Odin shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XWALD2_P3100OXXALE2_P3100XXLD4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try to go into download mode and flash a custom recovery using odin. I recommend CWM. Then try to go into recovery mode and wipe data, cache, dalvik cache and factory reset (NOTE: It will delete EVERYTHING and your tab will be like out of the box). Now try to boot into android, if android doesn't boots up then use odin to flash a custom rom or find a stock rom for your device and then your tablet should be fine.
Good luck :thumbup: and happy flashing .
And if you found this helpful then don't forget to hit the thanks button.
Sent from my GT-P3100 using xda app-developers app

Nothing...
I've tried Heimdall and doesn't detect my device. I've tried to install another one CWM and the same problem...
I've reinstalled the samsung drivers into 2 computers, differents usb ports... no recovery, no download mode and the charging icon (battery icon) doesn't appear (but charges).
I think my tab is dead... I don't know how more I can do it.
Thanks for the ideas

OK, first off, that screen is a FORCED DOWNLOAD MODE, it will happen for several reasons (usually a bad ROM flash), all you had to do was flash the stock .tar file via Odin.
Your first mistake was checking "repartition" in Odin, YOU NEVER EVER WANT TO DO THAT EVER, now since you didn't have a PIT hopefully it just cancelled out before doing anything bad. try reflashing in Odin with the stock ROM.
Heimdall will not work just because you have the drivers for Odin, infact Heimdall has it's own DRIVER that will override the Samsung driver Odin uses on the USB port (and usually any other USB on that stack) you connect the tablet to when you do the driver install step in Heimdall.
FYI, if you are on windows 8 there is a good chance you still can't do jack yet, to my knowledge windows 8 PC's are a no go for android ROM flashing.

The computers I've tried to flash with odin are with windows 8. But I flash my phone without problems...
Maybe with another windows version. I'll give a try this afternoon at home.
Thanks!!

daniel644 said:
OK, first off, that screen is a FORCED DOWNLOAD MODE, it will happen for several reasons (usually a bad ROM flash), all you had to do was flash the stock .tar file via Odin.
Your first mistake was checking "repartition" in Odin, YOU NEVER EVER WANT TO DO THAT EVER, now since you didn't have a PIT hopefully it just cancelled out before doing anything bad. try reflashing in Odin with the stock ROM.
Heimdall will not work just because you have the drivers for Odin, infact Heimdall has it's own DRIVER that will override the Samsung driver Odin uses on the USB port (and usually any other USB on that stack) you connect the tablet to when you do the driver install step in Heimdall.
FYI, if you are on windows 8 there is a good chance you still can't do jack yet, to my knowledge windows 8 PC's are a no go for android ROM flashing.
Click to expand...
Click to collapse
I've only used Windows 8 for flashing so far and works perfectly fine in my experience

Trying with a pc on windows xp and the same situation... odin sais allways the same...
I've put a pit file that I found called "signed_espresso_20120220_16G.pit". I can't remember if I used another time... I'm not sure. But this last time I use it.
Could I do something more??...

ofwise said:
Trying with a pc on windows xp and the same situation... odin sais allways the same...
I've put a pit file that I found called "signed_espresso_20120220_16G.pit". I can't remember if I used another time... I'm not sure. But this last time I use it.
Could I do something more??...
Click to expand...
Click to collapse
YOU shouldn't EVER use a PIT file in Odin, especially if your not even sure it's the right one, using an incorrect PIT file can totally screw up your device.
The ONLY time you could ever need a PIT file is if you flashed a ROM that changed the format of the partition tables (like rfs to mtd or bml) which to my knowledge non of the ROM for these tablets do that.

Hrmmm... Have you tried to see if Samsung Kies can do anything about it?
I mean, really. Your system partition is corrupt so i doubt it can detect anything.
As a last resort could you open up the tab and pull out the battery? Or even let the battery completely run out?

I've already pulled out the battery many times. Letting the tab without battery at least 1 hour... 1 day... and when I plug it and try to access to download mode... only the same screen (triangle, phone and computer).

ofwise said:
I've already pulled out the battery many times. Letting the tab without battery at least 1 hour... 1 day... and when I plug it and try to access to download mode... only the same screen (triangle, phone and computer).
Click to expand...
Click to collapse
Check this out ofwise- h**ps://www.youtube.com/watch?v=pJnoiMTw5cY&feature=youtube_gdata_player
Note-replace (**) in the link with (tt).
Sent from my GT-P3100 using xda app-developers app

Fastboot sais "Waiting device"...

ofwise said:
Fastboot sais "Waiting device"...
Click to expand...
Click to collapse
Well, your f*cked.
Sent from my GT-P3113 using Tapatalk HD

SM-G9200 rooting/recovery problem.. HELP!!!

I have the SM-G9200 duos of the S6 and for the life of me I am having lots of issues rooting and installing TWRP.. I have try installing TWRP ver. 2.8.7.1 and it install fine but there is no touch and I cant use the keys either.. only the power key works but this only locks the screen...I have tried lower versions but fails, I have also looked for CWM for this device and the ones I found fails on odin install... Can anyone help me?
P.S. I had the phone rooted before but for unknown reason it lost root... ATM I can only boot into download mode and twrp with no touch... Please help

graveangel said:
I have the SM-G9200 duos of the S6 and for the life of me I am having lots of issues rooting and installing TWRP.. I have try installing TWRP ver. 2.8.7.1 and it install fine but there is no touch and I cant use the keys either.. only the power key works but this only locks the screen...I have tried lower versions but fails, I have also looked for CWM for this device and the ones I found fails on odin install... Can anyone help me?
P.S. I had the phone rooted before but for unknown reason it lost root... ATM I can only boot into download mode and twrp with no touch... Please help
Click to expand...
Click to collapse
What's your CSC? Might be worth flashing the stock build via Odin to see if you can at least get it working again and then go from there

EddyOS said:
What's your CSC? Might be worth flashing the stock build via Odin to see if you can at least get it working again and then go from there
Click to expand...
Click to collapse
At this point i am not sure as I can not boot into the phone to check but when in download mode on top it shows the model SM-G9200ZH

graveangel said:
At this point i am not sure as I can not boot into the phone to check but when in download mode on top it shows the model SM-G9200ZH
Click to expand...
Click to collapse
OK, I think this is what you need:
http://www.sammobile.com/firmwares/download/48053/G9200ZHU1AOF1_G9200ZZH1AOF1_TGY/
I'm downloading it now, or you could try using SamFirm as it gets it from Samsung. You can then flash it with Odin and it should at least get the phone running again. I'm downloading it in case you can't and will upload it when in work tomorrow as I have crappy uploads at home

EddyOS said:
OK, I think this is what you need:
http://www.sammobile.com/firmwares/download/48053/G9200ZHU1AOF1_G9200ZZH1AOF1_TGY/
I'm downloading it now, or you could try using SamFirm as it gets it from Samsung. You can then flash it with Odin and it should at least get the phone running again. I'm downloading it in case you can't and will upload it when in work tomorrow as I have crappy uploads at home
Click to expand...
Click to collapse
I have download it with SamFirm (nice little tool), and no luck with the installation, I have also tried several firmwares and they all fail... This is the log from odin when trying to install the one you recommended
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9200ZHU1AOF1_G9200ZZH1AOF1_G9200ZHU1AOF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

graveangel said:
I have the SM-G9200 duos of the S6 and for the life of me I am having lots of issues rooting and installing TWRP.. I have try installing TWRP ver. 2.8.7.1 and it install fine but there is no touch and I cant use the keys either.. only the power key works but this only locks the screen...I have tried lower versions but fails, I have also looked for CWM for this device and the ones I found fails on odin install... Can anyone help me?
P.S. I had the phone rooted before but for unknown reason it lost root... ATM I can only boot into download mode and twrp with no touch... Please help
Click to expand...
Click to collapse
I'm also have this device sm g9200 can i know how to root this device cause i have try many times and its failed

[Q] Galaxy S6 Bootloop Help

First time poster on here, long story short, I tried to root a Galaxy S6 sm-g920f with cf-auto-root. However, that put the phone into a bootloop. I have since downloaded the official g920f patch and it always FAILS right at the end after it says radio. It then stays on downloading screen. Anyone know how to fix this?
Any help is much appreciated.

Flash with stock ROM via odin.

arhjay said:
First time poster on here, long story short, I tried to root a Galaxy S6 sm-g920f with cf-auto-root. However, that put the phone into a bootloop. I have since downloaded the official g920f patch and it always FAILS right at the end after it says radio. It then stays on downloading screen. Anyone know how to fix this?
Any help is much appreciated.
Click to expand...
Click to collapse
Donwload stock rom from Sammobile.com and flash it via Odin / Download mode.

roydok said:
Flash with stock ROM via odin.
Click to expand...
Click to collapse
That's what I've been trying to do but it comes up fail still.
Tried another and it failed at writing NAND

With the sammobile one it gets stuck at SetupConnection
Screenshot below ( can;t post links yet
i . gyazo . com/96ec1ff68247a625c65fdd1b45ad138a.png

<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOE3_G920FBTU1AODQ_G920FXXU1AOE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1005)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thats the sammobile stock rom

When trying to flash I get this message in red on download mode screen.
SW REV. CHECK FAIL. DAVICE: 2 BINARY: 1

Try changing ports from USB 2.0 to USB 3.0. Repeat flash as many times until you succeed. Took me 13x 1st time I flash 5.1.1.

roydok said:
Try changing ports from USB 2.0 to USB 3.0. Repeat flash as many times until you succeed. Took me 13x 1st time I flash 5.1.1.
Click to expand...
Click to collapse
Ok, going to try that now, thanks for the reply

This will come to Pass.

roydok said:
This will come to Pass.
Click to expand...
Click to collapse
Turns out my computer doesnt have usb 3... However, now I get stuck at SetupConnection
May try using jodin on macbook
EDIT: Getting the same nand write error now again

Ok, so after trying to reflash with AutoRoot it gets stuck on the start up splash "Samsung Galaxy s6 powered by android). At the top it says "RECOVERY IS NOT SEANDROID ENFORCING"
Please help

Try using another micro USB cable.

SM-N915A , unable to boot, Odin failed, now bricked.

Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?

pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse
Get md5 tar file & make sure your in download mode connect phone to Odin and try again

pit file with Odin 3.07 0 3.09 single and tell me how it went
pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse

ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?

pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that

ltindi32 said:
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that
Click to expand...
Click to collapse
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb

ltindi32 said:
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb
Click to expand...
Click to collapse
It says I need the decryption key in order to dl the file.

pubtemp said:
It says I need the decryption key in order to dl the file.
Click to expand...
Click to collapse
!bawMPPRshf_1tFt1xeqtXh1a9zP1ow5KkRYaJlhXWf8

Hey guys, i have 1:1 the same problem with my n915fy. It dont boot and when i try to get in recovery it just stuck on booting recovery.
Have anyone the files for me too? I bought the phone Bricked.
Edit: Things I already tried:
Installed stock 5.1.1 per odin
Installed 5.1.1 per odin while checked the mark Nand earse all
Installed 4.4.4 per odin
Installed CWM per odin
Still stuck on Samsung Galaxy booting logo, when i try to go in Recovery menu its calls: " Recover booting" but just restart after one minute.
Hope someone can help me...
Btw where can i get pitfiles and would it help when i patch one?

pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
You know what, try to clean power button. It may sticks. Pull battery and put small drop of rubbing alcohol. Then press couple times ( with out battery). Let dry for 10 min( you may use hair dryer on low power) . Put battery back and let us know.
Sent from my SAMSUNG-SM-N920A using XDA Premium HD app

Hey, i having the same problem, i was wondering if someone could make a step by step guide on how to fix it. also mine says mmc: mmc_write fail.
When i did Nand erase it says
mmc: mmc_read fail
ERASING USERDATA PARTITION

My SM-N915A went full dead on incomplete upgrade. Tried everything possible no lights, no vibration, no nothing: fill dear brick.
Was told its emmc corrupt.
Kindly help

can't you use samsung kies?

Hi to all. I was trying to recover some files with DrFone when it tried to root my phone. The rooting process failed and the phone bricked. If I try to power it on, it appears the writing "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Obviously kies can't connect to the phone.
If I press pwr+vol_dn+home and then select "volume up" the phone goes in download mode but doesn't accept the reset of drfone, the download process freeze at half...
What can I do?
Thanks in advance!

try flashing only pitt file

is there anyone that does this upload , reload repair for others. are is there instructions to follow somewhere?

ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
thanks for the pit file,saved my n915a after encountering "DRK error" after the 6.0.1 update. Cheers