Related
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
an exact thing happen to me.but i manage to get my pc to detect the phone by pressing power+volume up+home (i dont know what mode).odin detected my phone but the flashing stuck at setup connection..because it was not in downloading mode i guess...
same as above, help needed!
additional info: pc and odin detect phone bot not kies, on kies it keep saying connecting....and theres no display on the phone
same here wont do anything
same with me, my phone wont start even on download mode so you cannot use odin.. please help.
same case , i accidently pressed wrong phone version and my phone was 'bricked'
any help ?
Same happened here! Has anyone found a solution??
Edit: All right. Here's what I did:
1. Remove the battery from the Galaxy Ace
2. Connect the USB cable to the PC as well as the phone
3. Hold: volume down + home + power buttons all together and insert the battery while you're doing that (could be a bit tricky but it works)
4. Now you should be in download mode with "downloading" on your screen
5. Open up Odin v4.38 and flash your stock firmware (find it on samfirmware)
6. That's it! It should be fully working now (at least it did for me)
Tell me if it works for you guys!
its okay alr , i bring it to the service center it claims my motherboard spoil , it changed a new one for me
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
same thing happened to me.
did different methods to bring it to boot, even the two-prong diy to force to turn it on, still no go.
in the end, store replaced the device...with a bnew one of course.
Did anybody successfully revived bricked ACE??
Found expensive solution...
google "riff box samsung galaxy ace"
Samsung SGA revived
hey guys, i bricked my phone last april then the only solution to revive it is by replacing the motherboard or by using JTAG. btw JTAG support for samsung was released last May 12.
delete post
delete post
Galaxy Ace Bricket
i am also facing same situation..any update about please share
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
It just corrupts your motherboard
So a hardware issue can't be solved from home
Only option I guess is Service Center
Hope you have warranty
ROM Manager is a tricky tool
It hard bricks your phone if you do even a step wrong !
Ps ....Im just cautioning everyone so that it doesn't happen in future to others....
Sent from my Xperia Neo V using xda premium
dimethicone2k9 said:
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
Click to expand...
Click to collapse
Hardbricked ace cost 0 .
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
reloading tar by odin:laugh:
so since ive rooted and flashed a few android and symbian phones, my friend gave me his samsung galaxy sl 9003 and asked me to flash it to gingerbread, i choose official rom instead of cyanogenMod. i flashed device with odin v1.82 and when the phone shoud have rebooted, it did not, so i pulled out the battery and now i have no sign of life. no booting, no recovery, no download, even the hard reset button on the back does not help. is there any way that i can get this thing working? oh, and there is no radioshack store around, so i cant make a usb jig. please help me with this, i dont have money to buy him a new galaxy s
Same issue
Please please please..
I just had the same problem. Mistakenly and so stupidly I flashed my I9003 with I9000 stock.
Now phone is totally dead. I mean no recovery no download nothing.
Please help me out.
Is there no one to help?
Tried JIGing, combination keys (in various ways mentioned), hardware reset from back..nothing is working and phone is still dead.
Only thing left to do is JTAGing. Phone is still under warranty so don't wanna do it.
Will samsung cover this issue with their warranty?
Please at least help on that. I'm totally disappointed here and helpless.
Greetings to all senior member.
My Samsung Galaxt Tab 7.0 Plus went dead this morning. I cant turn it on, cant charge.. Nothing happen.
Previously i flash my GT P6200 with Austrian firm. Everything works fine except for the "insufficient memory availabl"
This morning i decided to flash my GT P6200 to P6200DXLPB, it went fine until i was about to root the phone back, when i flashed the CWM.zip it works just fine but when i try to flash the root.zip it went stuck and turned off.
I tried to turn it on again,but not luck. try to plug a charger, no respon.
I cant get into Recovery and Download mode.
But my GT P6200 generated a lil bit heat. Even in its dead state.
Please help me with some ideas on how to revive back my GT P6200.
Sending my GT P6200 to Samsung is my last resort.
*Sorry for my bad english*
Regards,
Bani from Malaysia
lowcothiradee said:
Greetings to all senior member.
My Samsung Galaxt Tab 7.0 Plus went dead this morning. I cant turn it on, cant charge.. Nothing happen.
Previously i flash my GT P6200 with Austrian firm. Everything works fine except for the "insufficient memory availabl"
This morning i decided to flash my GT P6200 to P6200DXLPB, it went fine until i was about to root the phone back, when i flashed the CWM.zip it works just fine but when i try to flash the root.zip it went stuck and turned off.
I tried to turn it on again,but not luck. try to plug a charger, no respon.
I cant get into Recovery and Download mode.
But my GT P6200 generated a lil bit heat. Even in its dead state.
Please help me with some ideas on how to revive back my GT P6200.
Sending my GT P6200 to Samsung is my last resort.
*Sorry for my bad english*
Regards,
Bani from Malaysia
Click to expand...
Click to collapse
Jtag- http://forum.gsmhosting.com/vbb/f47...galaxy-tab-7-0-plus-repair-dead-boot-1484728/
i have to buy the jtag tools? or its just a software which i can download?
enlighten please.
lowcothiradee said:
i have to buy the jtag tools? or its just a software which i can download?
enlighten please.
Click to expand...
Click to collapse
Please anyone help me with this issue.
Is my device bricked?
lowcothiradee said:
Please anyone help me with this issue.
Is my device bricked?
Click to expand...
Click to collapse
If you can't enter in the recovery and Download mode bricked device , solution tool jtag http://www.youtube.com/watch?v=Ami4TQH3cmc
devid801 said:
If you can't enter in the recovery and Download mode bricked device , solution tool jtag
nevermind then, i send my device to Samsung this evening. BTW thanks.
Click to expand...
Click to collapse
is your p6200 working now?
bani,same me too..P6200DXLPB,first stock ics for malaysia,thailand&indonesia..easy make hard brick...
pojeng said:
bani,same me too..P6200DXLPB,first stock ics for malaysia,thailand&indonesia..easy make hard brick...
Click to expand...
Click to collapse
Easy make hard brick bcoz u wipe data n cache through recovery..thats y..now u need to solve it ur self or, send it to centre bcoz u need to change ur motherboard
Ps: i read ur previous threat..
Sent from my GT-P6200 using XDA Premium HD app
Member90 said:
Easy make hard brick bcoz u wipe data n cache through recovery..thats y..now u need to solve it ur self or, send it to centre bcoz u need to change ur motherboard
Ps: i read ur previous threat..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
my gt-p6200 totally brick now.otg JTAG servise cant write or read internal memory(emmc)..its yes,change motherboard
is the proplem gone
lowcothiradee said:
devid801 said:
If you can't enter in the recovery and Download mode bricked device , solution tool jtag
nevermind then, i send my device to Samsung this evening. BTW thanks.
Click to expand...
Click to collapse
how much does it cost u to repair it....
-samsung user from malaysia-
Click to expand...
Click to collapse
[Firmware] Galaxy Tab 3 7in SM-T210R
How to restore your Samsung Galaxy Tab 3 7in wifi tablet with odin and the stock firmware. Unbrick your device
Directions [NOTE] make sure your battery is fully charged before starting this process.
Download files listed to your computer
UPDATED LINK WITH ALL Firmware in one easy spot HERE
1. http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware or MK1 Firmware to fix screen flicker
2. ODIN 3.07.ZIP
3. Samsung drivers
extract the drivers and install.
extract odin 3.07 program to desktop
extract firmware to desktop
Enter download mode / odin mode on the tablet from a powered off state.
Press and hold power, home, and volume down. you will see a warning screen then press volume up to continue
Now the device is in download mode. plug in usb cable to computer and device and let the drivers install give it 3 minutes
run odin 3.07 and wait to see the com port connect.
Click on pda button in odin and find the firmware file you extracted to your desktop and select it
press start and wait for device to finish the flash and reboot.
Thats it you just restored the firmware on your device.
Link to samsung mobile firmware
http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware
How to video linked here VIDEO
Thanks for the info. Is there already a way of how to reset the flash counter ?
batman08 said:
Thanks for the info. Is there already a way of how to reset the flash counter ?
Click to expand...
Click to collapse
No sure if Triangle away app will work on this device yet. I really dont care if it shows flash counts it doesnt bother me.
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
meber said:
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It should restore the entire device even stock recovery
Video added to OP
hi
is the firmwere contains or supports the arabic language ?
if not how do i find a firmwere that supports arabic language
tab 3 ( sm-t210r )
thak you
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Thank you
I am glad I found this I just got mine a week ago and was in a hurry to root it so I could play around and in doing so I spaced off making a backup. So again thanks your a lifesaver. Can do the updates then back it up before I root it again. You happen to know of any good roms for this tablet?
it didint work for me i get a block of yellow text and it says factory mode and alot of other stuff
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
tuncell said:
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
Click to expand...
Click to collapse
yes I think it would
is the latest version for the galaxy tab 3 t210r wifi only for the US the MK1 listed as unknown on http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=XAC ??
does this overwrite recovery?
if so can you still install philz recovery from http://forum.xda-developers.com/showthread.php?t=2468441 ??
also will the root method work from http://forum.xda-developers.com/showthread.php?t=2433853 ??
biggyhead said:
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Click to expand...
Click to collapse
After I rooted my Samsung Galaxy Tab 3 7" using prerooted.tar.md5, I had the same issue. The screen kept flickering and now I want to unroot to go back to the original manufacturing setting. I just flashed this firmware and it restored to the original condition except the flickering problem still exists. Please help.
unbrick my galaxy tab 3 10.1 P5200
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Horatio03 said:
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Click to expand...
Click to collapse
ok, here's the update, I have in fact been told it IS as a result of the firmware . . . . is there a 3rd party or download available that can be used to fix the firmware issue . ..if known please, please, please, give the link - - -thank you for your attention
screen flickers
when i restore my screen flickers and shakes and changes colors randomly
does it work for my : samsung galaxy tab 3, 7 inch SM-T210 ?
Bad firmware image
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
samsong313 said:
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
Click to expand...
Click to collapse
Thread updated. when I made this thread the device it was on a different firmware and it must not work anymore so links in OP are updated get the firmware from samsung mobile
hi
i am trying to get this thing on , but it keep showing me "Samsung Galaxy Note 10.1" screen , nothing else
tried to hard reset , so i pressed power+ vol up and asked me to restart or continue
so i continue , and i am stuck at a creen showing me android logo with "Downloading... do not turn off target!!"
its been like this for 4-5 hours
there is something written in the upper left corner
ODIN MODE
product name : GT-N8000
custom binary download : No
current binary : Samsung official
system status : Official
any help please ?
Be more spesific. What was the last thing you've done before that issue?
Btw, maybe it's time to use ODIN and install some rom. There are plenty of "flashing" guides in this forum and on internet. Please feel free to google: "how to flash on n8000 with ODIN". If you have any more trouble, question or something like it feel free to ask. Just be sure you mentioned me in your question so I can now there is a question that asked to me.
Have a nice day.
Edit: I found my answer too hard to understand so here is some hints:
You should search for "how to use odin".
You should download a firmware that corresponds to your tablet. (THIS IS IMPORTANT. IF YOU WON'T BE CAREFUL YOU CAN DAMAGE YOUR DEVICE)
There are plenty of guides that explains how to flash a firmware to a samsung phone. Don't worry, that way is effective for almost every samsung device (except for the new ones) and will be succesfull for your n8000 too!
furkey said:
Be more spesific. What was the last thing you've done before that issue?
Btw, maybe it's time to use ODIN and install some rom. There are plenty of "flashing" guides in this forum and on internet. Please feel free to google: "how to flash on n8000 with ODIN". If you have any more trouble, question or something like it feel free to ask. Just be sure you mentioned me in your question so I can now there is a question that asked to me.
Have a nice day.
Edit: I found my answer too hard to understand so here is some hints:
You should search for "how to use odin".
You should download a firmware that corresponds to your tablet. (THIS IS IMPORTANT. IF YOU WON'T BE CAREFUL YOU CAN DAMAGE YOUR DEVICE)
There are plenty of guides that explains how to flash a firmware to a samsung phone. Don't worry, that way is effective for almost every samsung device (except for the new ones) and will be succesfull for your n8000 too!
Click to expand...
Click to collapse
the tablet is not mine , my niece was using it
it was running good until several days and stopped working
when i go to download mode , it keep restarting for ever
i went to some local shop in my area and they said they can't fix it ( maybe its a hardware issue ? )
If there is a boot loop it is more likely being a software issue but I was wrong before too. So did you tried to flash a rom?
Sent from my D6503 using Tapatalk
furkey said:
If there is a boot loop it is more likely being a software issue but I was wrong before too. So did you tried to flash a rom?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
no , i didn't tried to flash it
my PC wont recognize it
aos10 said:
no , i didn't tried to flash it
my PC wont recognize it
Click to expand...
Click to collapse
Try to install kies it will install drivers for you
Sent from my D6503 using Tapatalk
furkey said:
Try to install kies it will install drivers for you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
installed kies , but the logo keep running on my desktop
ok , now my niece told me there is some important files and photos on it
how to restore those files without formatting ?
i can't even access to the device , and no microSD card
Just install the firmware. That's the only way you can open up your files with the resources you have. If it's that important, I strongly suggest you to go to a Samsung service and tell them your story. If you want to do it yourself, search for: installing custom recovery, installing rom. When you switch between different roms you don't have to format your data but I can't remember the case with the Odin.
Sent from my D6503 using Tapatalk
Hi, i have the same problem.
I have a galaxy note 10.1 2013. It originally had ics. I updated my software in the middle of this year.
Today, my tab worked fine, as it usually, does. I placed it in my bag at 5:30 pm after playing and surfing the internet. At 11pm, i took it out and it was a bit hot and it seemed to be stuck at the screen where it says "samsung galaxy note 10.1".
I tried to restart my tab but it still remains stuck in the same screen. When i plugged it in, it shows that im charging. But when i start it up, its still stuck in the same screen.
When i pressed the power button and the volume up button, it gets to this screen which says
Warning!! (Blahblah something about custom os blahblah) volume up: continue volume down: cancel(restart phone)
What do i do? I didnt do anything weird or different today than i would have any other day.
Please, i need your help. Thank you!
Sent from my GT-I9505 using XDA Free mobile app
Sent from my GT-I9505 using XDA Free mobile app