hi
i am trying to get this thing on , but it keep showing me "Samsung Galaxy Note 10.1" screen , nothing else
tried to hard reset , so i pressed power+ vol up and asked me to restart or continue
so i continue , and i am stuck at a creen showing me android logo with "Downloading... do not turn off target!!"
its been like this for 4-5 hours
there is something written in the upper left corner
ODIN MODE
product name : GT-N8000
custom binary download : No
current binary : Samsung official
system status : Official
any help please ?
Be more spesific. What was the last thing you've done before that issue?
Btw, maybe it's time to use ODIN and install some rom. There are plenty of "flashing" guides in this forum and on internet. Please feel free to google: "how to flash on n8000 with ODIN". If you have any more trouble, question or something like it feel free to ask. Just be sure you mentioned me in your question so I can now there is a question that asked to me.
Have a nice day.
Edit: I found my answer too hard to understand so here is some hints:
You should search for "how to use odin".
You should download a firmware that corresponds to your tablet. (THIS IS IMPORTANT. IF YOU WON'T BE CAREFUL YOU CAN DAMAGE YOUR DEVICE)
There are plenty of guides that explains how to flash a firmware to a samsung phone. Don't worry, that way is effective for almost every samsung device (except for the new ones) and will be succesfull for your n8000 too!
furkey said:
Be more spesific. What was the last thing you've done before that issue?
Btw, maybe it's time to use ODIN and install some rom. There are plenty of "flashing" guides in this forum and on internet. Please feel free to google: "how to flash on n8000 with ODIN". If you have any more trouble, question or something like it feel free to ask. Just be sure you mentioned me in your question so I can now there is a question that asked to me.
Have a nice day.
Edit: I found my answer too hard to understand so here is some hints:
You should search for "how to use odin".
You should download a firmware that corresponds to your tablet. (THIS IS IMPORTANT. IF YOU WON'T BE CAREFUL YOU CAN DAMAGE YOUR DEVICE)
There are plenty of guides that explains how to flash a firmware to a samsung phone. Don't worry, that way is effective for almost every samsung device (except for the new ones) and will be succesfull for your n8000 too!
Click to expand...
Click to collapse
the tablet is not mine , my niece was using it
it was running good until several days and stopped working
when i go to download mode , it keep restarting for ever
i went to some local shop in my area and they said they can't fix it ( maybe its a hardware issue ? )
If there is a boot loop it is more likely being a software issue but I was wrong before too. So did you tried to flash a rom?
Sent from my D6503 using Tapatalk
furkey said:
If there is a boot loop it is more likely being a software issue but I was wrong before too. So did you tried to flash a rom?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
no , i didn't tried to flash it
my PC wont recognize it
aos10 said:
no , i didn't tried to flash it
my PC wont recognize it
Click to expand...
Click to collapse
Try to install kies it will install drivers for you
Sent from my D6503 using Tapatalk
furkey said:
Try to install kies it will install drivers for you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
installed kies , but the logo keep running on my desktop
ok , now my niece told me there is some important files and photos on it
how to restore those files without formatting ?
i can't even access to the device , and no microSD card
Just install the firmware. That's the only way you can open up your files with the resources you have. If it's that important, I strongly suggest you to go to a Samsung service and tell them your story. If you want to do it yourself, search for: installing custom recovery, installing rom. When you switch between different roms you don't have to format your data but I can't remember the case with the Odin.
Sent from my D6503 using Tapatalk
Hi, i have the same problem.
I have a galaxy note 10.1 2013. It originally had ics. I updated my software in the middle of this year.
Today, my tab worked fine, as it usually, does. I placed it in my bag at 5:30 pm after playing and surfing the internet. At 11pm, i took it out and it was a bit hot and it seemed to be stuck at the screen where it says "samsung galaxy note 10.1".
I tried to restart my tab but it still remains stuck in the same screen. When i plugged it in, it shows that im charging. But when i start it up, its still stuck in the same screen.
When i pressed the power button and the volume up button, it gets to this screen which says
Warning!! (Blahblah something about custom os blahblah) volume up: continue volume down: cancel(restart phone)
What do i do? I didnt do anything weird or different today than i would have any other day.
Please, i need your help. Thank you!
Sent from my GT-I9505 using XDA Free mobile app
Sent from my GT-I9505 using XDA Free mobile app
Related
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
an exact thing happen to me.but i manage to get my pc to detect the phone by pressing power+volume up+home (i dont know what mode).odin detected my phone but the flashing stuck at setup connection..because it was not in downloading mode i guess...
same as above, help needed!
additional info: pc and odin detect phone bot not kies, on kies it keep saying connecting....and theres no display on the phone
same here wont do anything
same with me, my phone wont start even on download mode so you cannot use odin.. please help.
same case , i accidently pressed wrong phone version and my phone was 'bricked'
any help ?
Same happened here! Has anyone found a solution??
Edit: All right. Here's what I did:
1. Remove the battery from the Galaxy Ace
2. Connect the USB cable to the PC as well as the phone
3. Hold: volume down + home + power buttons all together and insert the battery while you're doing that (could be a bit tricky but it works)
4. Now you should be in download mode with "downloading" on your screen
5. Open up Odin v4.38 and flash your stock firmware (find it on samfirmware)
6. That's it! It should be fully working now (at least it did for me)
Tell me if it works for you guys!
its okay alr , i bring it to the service center it claims my motherboard spoil , it changed a new one for me
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
same thing happened to me.
did different methods to bring it to boot, even the two-prong diy to force to turn it on, still no go.
in the end, store replaced the device...with a bnew one of course.
Did anybody successfully revived bricked ACE??
Found expensive solution...
google "riff box samsung galaxy ace"
Samsung SGA revived
hey guys, i bricked my phone last april then the only solution to revive it is by replacing the motherboard or by using JTAG. btw JTAG support for samsung was released last May 12.
delete post
delete post
Galaxy Ace Bricket
i am also facing same situation..any update about please share
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
It just corrupts your motherboard
So a hardware issue can't be solved from home
Only option I guess is Service Center
Hope you have warranty
ROM Manager is a tricky tool
It hard bricks your phone if you do even a step wrong !
Ps ....Im just cautioning everyone so that it doesn't happen in future to others....
Sent from my Xperia Neo V using xda premium
dimethicone2k9 said:
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
Click to expand...
Click to collapse
Hardbricked ace cost 0 .
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
reloading tar by odin:laugh:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
[Firmware] Galaxy Tab 3 7in SM-T210R
How to restore your Samsung Galaxy Tab 3 7in wifi tablet with odin and the stock firmware. Unbrick your device
Directions [NOTE] make sure your battery is fully charged before starting this process.
Download files listed to your computer
UPDATED LINK WITH ALL Firmware in one easy spot HERE
1. http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware or MK1 Firmware to fix screen flicker
2. ODIN 3.07.ZIP
3. Samsung drivers
extract the drivers and install.
extract odin 3.07 program to desktop
extract firmware to desktop
Enter download mode / odin mode on the tablet from a powered off state.
Press and hold power, home, and volume down. you will see a warning screen then press volume up to continue
Now the device is in download mode. plug in usb cable to computer and device and let the drivers install give it 3 minutes
run odin 3.07 and wait to see the com port connect.
Click on pda button in odin and find the firmware file you extracted to your desktop and select it
press start and wait for device to finish the flash and reboot.
Thats it you just restored the firmware on your device.
Link to samsung mobile firmware
http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware
How to video linked here VIDEO
Thanks for the info. Is there already a way of how to reset the flash counter ?
batman08 said:
Thanks for the info. Is there already a way of how to reset the flash counter ?
Click to expand...
Click to collapse
No sure if Triangle away app will work on this device yet. I really dont care if it shows flash counts it doesnt bother me.
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
meber said:
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It should restore the entire device even stock recovery
Video added to OP
hi
is the firmwere contains or supports the arabic language ?
if not how do i find a firmwere that supports arabic language
tab 3 ( sm-t210r )
thak you
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Thank you
I am glad I found this I just got mine a week ago and was in a hurry to root it so I could play around and in doing so I spaced off making a backup. So again thanks your a lifesaver. Can do the updates then back it up before I root it again. You happen to know of any good roms for this tablet?
it didint work for me i get a block of yellow text and it says factory mode and alot of other stuff
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
tuncell said:
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
Click to expand...
Click to collapse
yes I think it would
is the latest version for the galaxy tab 3 t210r wifi only for the US the MK1 listed as unknown on http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=XAC ??
does this overwrite recovery?
if so can you still install philz recovery from http://forum.xda-developers.com/showthread.php?t=2468441 ??
also will the root method work from http://forum.xda-developers.com/showthread.php?t=2433853 ??
biggyhead said:
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Click to expand...
Click to collapse
After I rooted my Samsung Galaxy Tab 3 7" using prerooted.tar.md5, I had the same issue. The screen kept flickering and now I want to unroot to go back to the original manufacturing setting. I just flashed this firmware and it restored to the original condition except the flickering problem still exists. Please help.
unbrick my galaxy tab 3 10.1 P5200
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Horatio03 said:
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Click to expand...
Click to collapse
ok, here's the update, I have in fact been told it IS as a result of the firmware . . . . is there a 3rd party or download available that can be used to fix the firmware issue . ..if known please, please, please, give the link - - -thank you for your attention
screen flickers
when i restore my screen flickers and shakes and changes colors randomly
does it work for my : samsung galaxy tab 3, 7 inch SM-T210 ?
Bad firmware image
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
samsong313 said:
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
Click to expand...
Click to collapse
Thread updated. when I made this thread the device it was on a different firmware and it must not work anymore so links in OP are updated get the firmware from samsung mobile
Hi all,
new to this forum and before continuing i will say to admins and moderators i have read the rules but i do appolgise if this question has previously been asked and answered but i have looked everywhere to answer this question through out the net and here but just cant seem to find the answer i look for for this tablet..?
My question is probably simple to some..
basically i have had a galaxy tab 2 7" GT-P3110 for some time now and i rooted it awhile ago with out any problems..
now after awhile i have now decided i want to update the tablet.. to the latest firmware. now we all know that we cant do this simple because it says device status custom or modified..
so i have tried many things now and the devise is reset but still on custom..
can anyone please tell me the way to basically reset this so i can update it?
i have unrooted it via supersu and reset it via factory reset..
i have tried to update via kies but no joy..
i have downloaded odin but have not got a clue where to get a official firmware.. and not sure if im doing it the right way or heading the right way.. can anyone help ?
regards mogs..
n1mogs said:
Hi all,
new to this forum and before continuing i will say to admins and moderators i have read the rules but i do appolgise if this question has previously been asked and answered but i have looked everywhere to answer this question through out the net and here but just cant seem to find the answer i look for for this tablet..?
My question is probably simple to some..
basically i have had a galaxy tab 2 7" GT-P3110 for some time now and i rooted it awhile ago with out any problems..
now after awhile i have now decided i want to update the tablet.. to the latest firmware. now we all know that we cant do this simple because it says device status custom or modified..
so i have tried many things now and the devise is reset but still on custom..
can anyone please tell me the way to basically reset this so i can update it?
i have unrooted it via supersu and reset it via factory reset..
i have tried to update via kies but no joy..
i have downloaded odin but have not got a clue where to get a official firmware.. and not sure if im doing it the right way or heading the right way.. can anyone help ?
regards mogs..
Click to expand...
Click to collapse
Follow these steps :
1) First download Samsung firmware from GT-P3110 Firmware
2) Download the P3110 firmware based on your region or from any region but you need to wipe/cache reset in case you are going to flash from the region you are not residing.
3) Extract the firmware using winrar,winzip or 7zip,you will get a files with tar.md5 extension..
4) Open odin,please see only these options are checked. Auto-reboot and F.Reset Time,,plese uncheck all other options.
5) click on PDA and select the firmware you have got after extraction
6) Now click on start.
7) you should get a message in the left bottom panel saying "Successful".
8) your tablet will restart.
9) switch it off by pressing Power off button
10) Now immediately press Power button+volume up button for few seconds until you see samsung boot logo and leave power button but keep on pressing volume up button until you see android logo i.e recovery mode.
11) Wipe factory reset from menu and restart.
Enjoy Buddy.
:laugh::laugh::laugh::laugh::laugh:
Update
Hi thanks for your reply and its much appreciated. after posting this last night i ended up going with what i was thinking,
which was pretty much the same as what you suggested. i now have managed to update the device and now rerooted
with not doing things like this ona regular basis its a bit of a ball ache trying to remember how or to suss things out without bricking something
but again thanks for you reply..
however do you know much about sony xperia z? i have one and was wondering if you or anyone else knows of a way to screen mirror movies from it to xbox? Aka on that device "throw" i have managed to setup a media server but wanted the throw to work or screen mirroring?
Hi,
Am totally new on this platform and looking for a solution to my rooted Samsung Tab 2. I wish to update it but keep on getting your device is modified prompt. Kindly assist.
I searched most of the web for a week now, trying to figure out how to fix my Tablet on this nightmare.
so before it all began, i left my Tablet charging in midnight, left it in stand-by mode for 12 hours (yes i slept for 12 hours). when i woke up, it was on shutdown mode. i don't know why, i tried opening it, but it was stuck on Samsung Logo for nearly 2 mins. then i tried re-restart it again, and then i was stuck on "Samsung Galaxy tab 2 7.0". I can charge my Tab and it only has 80% battery for some reason. and so i asked someone from Yahoo Ask about how to fix this problem, i couldn't go to Recovery mode or start my tab, but everytime i try, it'll only get stuck at "Samsung Galaxy tab 2 7.0". Now, this guy said i should download a custom os or firmware or smth. (Forgot). and then i downloaded Odin, and a Firmware. for my GT-P3100.
I know i made a mistake, since i wanted to already fix my problem, i went to try anything i didn't actually know of. Now i have a problem, I didn't listen to "Don't turn off target" thing, and i shutdown my tab in the middle of using Odin, since most of the tries failed, Now i got the Firmware upgrade encountered an Issue.
I Tried using Samsung Kies to fix the issue, but it'll only get stuck on Connecting... i tried reinstalling the Drivers but nothing happened, then i uninstalled Kies. and then i download firmwares that might help me with my problem. but most of them failed.
i have 2 Firmware Stock for GT-P3100 Philippines. I really want to get my tab fixed already without a technician repairing it for me. so can you guys help?
I'm about to Download and try Jellybean Firmware, I Don't know anything about this problem nor these firmware. since i couldn't connect to Kies, i only tried fixing it on Odin.
Most of the Firmwares i tried failed. and every time i want to find some thread with the same problem as mine, i couldn't find anything.
i tried everything and it still wont work.
HELP!
._. It happened to me when i deleted System using the recovery mode e.e You should call samsung or buy another tablet ~i have 1 p3100~
Sent from my SM-G800H using XDA Free mobile app
Eddy_0205 said:
._. It happened to me when i deleted System using the recovery mode e.e You should call samsung or buy another tablet ~i have 1 p3100~
Sent from my SM-G800H using XDA Free mobile app
Click to expand...
Click to collapse
if i ran out of options, i have no choice but to get it fixed by some pro. i don't really know how it happened to my tablet : (
............................
HELP
Can someone help me, because I have a tab same isseu
I have GT-P3100 SamsungTab 2 (7''). Due to some reason its unable to boot normal and stuck at bootup logo.I try open recovery mode but fail.
I open download mode and try update firmware by ODIN3. But fail as USB and set disconnected in middle. After that phone unable to boot in download or recovery mode and always shows "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
I tried again with ODIN but unable to flash firmware. Tried CWM & firmware MD5 files but all fail. On ODIN3 (3.07) it shows success in tool but actually no impact on set. When try with ODIN3 (1.85) it saying fail to write NAND.
Is any way i can correct my Tablet?
Any suggestion will be welcomed.
Thanks in advance
Umamkgf