I have a tf700t that is rooted with JB 4.2.1 and the most recent firmware i think? 10.6.1.14.8
My Hdmi out stopped working. i bumped the cable i check to see if I knocked it out completely? I wiggled it and that was the end. I thought maybe a bad cable. bought new one. Still N.G. I verified the cable connection with my phone. I can connect to the tv with phone. I looked with magnifying glass and the pins in the connector look okay? I reset the app preferences to see if that would help. Nope! I am about to try a factory reset or re-flash last update. Any suggestions or ideas, would be greatly appreciated.
Thanks
I did a factory reset... Still N.G. I'm not sure if it is firmware related or HW.
Related
So I've had my Transformer since May and all of a sudden it started playing up and now the screen will no longer display anything ive hooked it up to my tv via hdmi and everything is working fine, so does anyone have any ideas how to fix this?
There are no settings for the HDMI connectivity. Be sure that its not an issue with your HDMI cable or TV itself. Maybe try another cable. If no luck there I would do a full wipe and flash the latest firmware.
Sent from my SAMSUNG-SGH-I777 using XDA App
No... he's saying the screen on the device doesnt work, but he can tell the tablet itself still does because he can hook it up to the tv with no problem...
To OP... im sorry i have no idea
Sent from my Transformer TF101 using Tapatalk
Maybe the internal ribbon cable popped out? Did you drop it hard recently? Have you seen weird artifacts on the screen recently that might have been indicative of the cable becoming loose?
Here is my case, I am now on stock 4.1.1
When I connect my nexus to my PC, it only charges. I can neither mount USB storage nor attaching to debug mode. What even worse is that, I can't even run fastboot command in bootloader, so basically I can't flash a custom recovery.
As a result, I am now stuck on stock ROM.
Can anyone please give me an idea to get my USB driver work, or at least to flash a recovery?
EDIT: I have used fast charge before, so will it screwed up or disable the USB driver? Any way to restore it in my case?
EDIT: Solved. The two USB line charges only
Can anyone help me?
I have tried two USB lines with two PCs, so I do think there is a problem of my phone.
barrielui said:
EDIT: I have used fast charge before, so will it screwed up or disable the USB driver? Any way to restore it in my case?
EDIT: Solved. The two USB line charges only
Click to expand...
Click to collapse
Hello barrielui,
would you describe more information how you solved that issue? What do you exactly mean by last line? It's working only for "charging" or for data transfer (mass_storage) too? You've found new type of USB cabel or what?
Unfortunately have the exactly same issue few days after upgrade to JLB 4.1.1 stock Rom. It works properly few days and than from some reason something happen, but don't know what&why and how to fix it.
Think maybe it's a hardware problem, but how it happened is mystery
I had issues with my usb for a while myself, it just kept getting worse until I would not get a charge at all. Your issue may be different than mine, but I had my nexus s the first week it came out. I had already planned to have my phone sent in for repair on my usb, so I figured I could tinker with it. It turns out that the little tab in my charge port was pushed down (away from the screen when holding in hand) just enough that it would barely make contact with my micro usb cables. I used a tac and slipped it in between and carefully pried up a little.
Caution, this may not be your problem, look at other options, or compare your usb port to another phone to determine if it is it. My tab was just barely gaped from the bottom.
Solution
Try cleaning the Nexus port pins with something pointy...deposits on pins inside cellphone port prevents the usb contact..clean it one by one with a pin and tell me if it worked
teekex said:
Think maybe it's a hardware problem, but how it happened is mystery
Click to expand...
Click to collapse
It was a hardware issue with USB connector on motherboard on my case, but strange is that it was occurred when flashing to newer system.
I've had a TF700T since the release day...upgrading from the Prime and the TF101 before that. When I first received it, I tested out all of the features, including HDMI out, to make sure that everything was in working order. I even watched a few movies using the HDMI out. Now, all of a sudden, my tablet does not seem to recognize when an HDMI cable is plugged in and connected to a TV. I've tried several different cables and TVs, including the ones it worked on/with previously, and nothing.
Does anyone have any ideas on what could be causing this? I have a few video players installed, and thought that one of them might be causing the issue, but they were all installed on Day 1, and there when it was working before.
Oh, and I'm not rooted or unlocked. Running with stock firmware for now.
You thoughts/assistance is much appreciated.
wouldnt know what to suggest except a factory reset
try a reboot, reset?
sent from LG optimus s (republic wireless) on tapatalk
Haven't gone the reset route yet...I'm sure that will probably fix it, but it just seems like a royal PITA. Since I'm pretty sure that JB is around the corner, I'm going to try and hold out and hope that fixes it. If not, I'll wipe and re-install. Was hoping that someone in the forums might have had an alternate solution.
I had the same happen to me with my Prime. The 1st time the hdmi port was actually loose and I had to rma. The 2nd Prime it happened again but when I brought it back to best buy the Greek squad did a factory reset and it started working again.
If the connection is not loose, try a factory reset (I know - it's a pain). If not you may need to RMA.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
clenz said:
I had the same happen to me with my Prime. The 1st time the hdmi port was actually loose and I had to rma. The 2nd Prime it happened again but when I brought it back to best buy the Greek squad did a factory reset and it started working again.
If the connection is not loose, try a factory reset (I know - it's a pain). If not you may need to RMA.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
and you can always back up your stuff (front page had an app to do just that)
sent from LG optimus s (republic wireless) on tapatalk
seanford said:
Haven't gone the reset route yet...I'm sure that will probably fix it, but it just seems like a royal PITA. Since I'm pretty sure that JB is around the corner, I'm going to try and hold out and hope that fixes it. If not, I'll wipe and re-install. Was hoping that someone in the forums might have had an alternate solution.
Click to expand...
Click to collapse
JB install will very well fix it. Not because JB might have a fix, but because installing JB will reset your tablet.
---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------
I have inconsistent successful HDMI connections with both the Infinity and the Transformer Prime.
The simplest solution is just to unplug and replug the HDMI cable from the tablet if you don't see anything on your TV screen when you plug it in the first time. It will usually show on the HDTV screen, after a quick disconnect reconnect of the cable.
seanford said:
...I tested out all of the features, including HDMI out.... Now, all of a sudden, my tablet does not seem to recognize when an HDMI cable is plugged in and connected to a TV. I've tried several different cables and TVs....
Click to expand...
Click to collapse
I'm not sure. My thinking, check your cables on other devices to confirm they're good. I had an issue when I got mine, but it was a short in the cable. I thought it may have been the port at first, but tried a second microHDMI cable, and no issues.
Other than that, what have you updated or install prior to last using the HDMI port? DId you try uninstalling those apps? There may be some kind of driver conflict.
When you have the cable plugged in, see if you get the HDMI options stuff in settings. Maybe there is setting you can change that may help. I know it shows up when the cable plugged in, but I don't remember what settings you could change other than stuff with 3D.
I have the same problem!
I've been connecting the tablet to a Samsung monitor via HDMI for three days now, succesfully too. I then went to work, connected the tablet to a display via VGA, and it worked. Tried again in the afternoon with the same monitor, randomly didn't work. Came home, now the HDMI randomly doesn't work! What is going on there?! A factory reset just for HDMI seems ridiculous but it's that or returning the tablet. No idea if the VGA converter (official ASUS) has damaged the port after I pulled it out?!
Okay so I have unlocked and flashed my device and it works perfectly, I plug in my hdmi cable to my tv and it works fine, the next day after I had loaded my device with plenty of ps1 roms for my emulator the connection is broken. I can confirm that the TV recognise the cable so it is the device that does not find the cable, there are no error message or anything. Some time went by and I figure that it might work again if I install a cleanrom, I installed the latest version of CleanROM Inheritance and did the wipe cache and dalvik but alas the device still doesnt find my cable, does anyone have any ideas for me to fix this?
-Unlocked
-Flashed TWRP 2.3.1.0
-CleanROM Inheritance 3.4.1
thx in advance
Have you tried flashing a different ROM? How long have you had this tablet? I had a TF Prime and suffered from a similar issue. The HDMI output worked flawlessly for several months, and then all of a sudden it stopped working. After some surfing around, I discovered that this is a hardware issue; the HDMI port on the Prime would just become dislodged from the motherboard and the only option was opening up the case and reattaching it.
Sv: [Q] Micro HDMI connection
Well isn't that great news wish a new that before ****ing up the warranty by rooting the device. I have not tried another rom Well I tried a different version of twrp but that's it. I have had this device for only two months.
Skickat från min ASUS Transformer Pad TF700T via Tapatalk 2
As we all know, since the new update to JellyBean 4.2 HDMI has been a problem. Before the update, I had minimal issues and HDMI worked perfect. After the update, HDMI output worked except no sound (like everyone else). A few months later, Asus finally put out a fix for this issue and my HDMI started to work again. 2-3 months later, my TF300 will not even output any picture or sound through HDMI. It was working fine on my Philips TV and then it just stopped one day. I've tried different TVs, new HDMI cord, factory reset, cold start, turning on and connecting the cord and TV in certain orders. Still nothing! I have enjoyed my tablet just this HDMI is a big problem. Anyone have a fix or heard of anything new to come from Asus? Please Help
Rrjr6 said:
As we all know, since the new update to JellyBean 4.2 HDMI has been a problem. Before the update, I had minimal issues and HDMI worked perfect. After the update, HDMI output worked except no sound (like everyone else). A few months later, Asus finally put out a fix for this issue and my HDMI started to work again. 2-3 months later, my TF300 will not even output any picture or sound through HDMI. It was working fine on my Philips TV and then it just stopped one day. I've tried different TVs, new HDMI cord, factory reset, cold start, turning on and connecting the cord and TV in certain orders. Still nothing! I have enjoyed my tablet just this HDMI is a big problem. Anyone have a fix or heard of anything new to come from Asus? Please Help
Click to expand...
Click to collapse
When you connect the HDMI cable to the tablet do you get the HDMI notification? or you no longer get anything at this point?
[email protected] said:
When you connect the HDMI cable to the tablet do you get the HDMI notification? or you no longer get anything at this point?
Click to expand...
Click to collapse
The tv recognizes the HDMI input but when it switches over, there is no signal, no picture, nothing....The tablet use to give me a HDMI icon (when it worked) but not anymore.
Rrjr6 said:
The tv recognizes the HDMI input but when it switches over, there is no signal, no picture, nothing....The tablet use to give me a HDMI icon (when it worked) but not anymore.
Click to expand...
Click to collapse
Can you tell me which version you are currently on? If previous version were working better you can always go the Asus site and download older version.
[email protected] said:
Can you tell me which version you are currently on? If previous version were working better you can always go the Asus site and download older version.
Click to expand...
Click to collapse
I'm on 4.2.1 build 10.6.1.27.1 20130711
The weird part is before I updated to the newest build the HDMI worked then when I checked for a new update it stopped. I installed the new update and it hasn't worked since.