Okay so I have unlocked and flashed my device and it works perfectly, I plug in my hdmi cable to my tv and it works fine, the next day after I had loaded my device with plenty of ps1 roms for my emulator the connection is broken. I can confirm that the TV recognise the cable so it is the device that does not find the cable, there are no error message or anything. Some time went by and I figure that it might work again if I install a cleanrom, I installed the latest version of CleanROM Inheritance and did the wipe cache and dalvik but alas the device still doesnt find my cable, does anyone have any ideas for me to fix this?
-Unlocked
-Flashed TWRP 2.3.1.0
-CleanROM Inheritance 3.4.1
thx in advance
Have you tried flashing a different ROM? How long have you had this tablet? I had a TF Prime and suffered from a similar issue. The HDMI output worked flawlessly for several months, and then all of a sudden it stopped working. After some surfing around, I discovered that this is a hardware issue; the HDMI port on the Prime would just become dislodged from the motherboard and the only option was opening up the case and reattaching it.
Sv: [Q] Micro HDMI connection
Well isn't that great news wish a new that before ****ing up the warranty by rooting the device. I have not tried another rom Well I tried a different version of twrp but that's it. I have had this device for only two months.
Skickat från min ASUS Transformer Pad TF700T via Tapatalk 2
Related
ASUS EEE PAD TRANSFORMER 00423
Problem: When i plug in the HDMI type C cord to the transformer it works great. When I go to play videos such as Youtube or Any video type via HDMI to tv it flickers constantly. Sometimes it will work and sometimes it will completley disable my devices screen and TV and I will have to hard reset. I was wondering if anyone else ran into a similiar problem and if it could be the HDMI cord ? Thanks
+1 on this. Not sure what kind of cord I have, but mine flickers too
I havent tried mine yet
Have you guys made any progresson this? I just got my cable and i am having the same issue.
I am currentlyon 3.1
No .... Nothing Yet ... I just ordered another cable to see if that is the problem .. Should be here tommorow
Make sure you use mini HDMI 1.3a cable.
Mine works perfectly with youtube, UPnPlay and moboplayer
I had some issues with my TF and my Sony Bravia HDMI connection and the problems were cleared up by performing a firmware update for the television itself. I have no idea if that would help your situation, but in my case a firmware update cleared up all the connection problems I was having.
Good luck,
DM
Dang, another problem with my Transformer (or with the cable.)
I bought the bundle off of TigerDirect with the Transformer, Mini HDMI cable and case.
I finally got around to opening up the cable and I connected it to my HDTV. Nothing happens.
I did some Googling and it said make sure the cable is fully inserted (yep) and that a HDMI notification should appear on the device. (nope)
Anybody else buy this bundle and try to connect to their HDTV? I'm trying to figure out if it's the cable or the device.
I tried rebooting it as the old standby fix, but still no-go.
Thanks!
Went and tried on my friend's HDTV and it worked like a charm.
Not sure what it is about my Panasonic plasma 1080p monster, but it doesn't work on it at all.
And I know the port is good, it's where I hook up my PS3.
Not too concerned because I won't use that feature too much, but I was thinking of how some hotels now offer HDMI in, so that's awesome the next time I need to travel for work.
Load up some music, some TV shows, a couple games, AND I can even do some work. (Yeah, right!)
I tried mine yesterday on our Samsung and it worked well, I was pleasantly surprised how simple it was to use.
Yeah, me too! (After I put it on a different tv.)
I was also surprised how good it looked for mirroring the display after some people said it didn't look great. Surfed, read some e-mail, even started up the Samurai game and everything looked excellent.
Looking forward to the 3.1 update which supposedly will support 1080p!
bleclair said:
Dang, another problem with my Transformer (or with the cable.)
I bought the bundle off of TigerDirect with the Transformer, Mini HDMI cable and case.
I finally got around to opening up the cable and I connected it to my HDTV. Nothing happens.
I did some Googling and it said make sure the cable is fully inserted (yep) and that a HDMI notification should appear on the device. (nope)
Anybody else buy this bundle and try to connect to their HDTV? I'm trying to figure out if it's the cable or the device.
I tried rebooting it as the old standby fix, but still no-go.
Thanks!
Click to expand...
Click to collapse
How did you end up fixing this issue? I am having the same problem.
AllTheWay said:
How did you end up fixing this issue? I am having the same problem.
Click to expand...
Click to collapse
Did you read the whole post or just the title?
Sent from my HTC Desire using XDA Premium App
Mine won`t work with my Panasonic plasma, works fine with my no name LCD TV
Mine worked great on 3 different projectors
Hdmi problem
I couldn't get my TF to work on my Sony Bravia TV. I loaded Clemsyn's kernel (v17) and it now works fine.
clemsyms kernal works for me using 50"panasonic plasma
I don't see how one rom works better than stock on hdmi unless something specific has been added or changed in reference to it. Is that what you are saying?
I do know pluging in the mini hdmi connector into the TF firmly was the difference between it working or not working on my sammy. BTW it looks great and surfing the internet on my TV has taken on a lot greater meaning since. Lots better than my lame PS3's browser
I had the same problem hooking up to my dad's tv, not completely sure of the brand of it. Samsung or Sharp.
Anyway, it would not work on any of the 3 hdmi inputs that were not being used up, so I tried plugging it into the input where his dtv recorder box was connected, and it worked.
Not sure if the tv had a setting in the setup menu's that would have made it work but I couldn't find anything that would have made it work on the other hdmi inputs. I had 3 different cables with me that I tried so that wasn't part of the problem.
I also remember the tablet was saying it was connected to hdmi but there was no video or audio on the tv on the other 3 inputs. Very strange. Works great on my LG I woulda been on one of the 3.1 unrooted asus updates at the time.
that's my experience with hdmi not working, hopefully it helps someone, someday
where is the solution?????
A solution has already been given above. The clemsyn kernel has a fix. Other than that you'd have to wait for a fix from ASUS
Sent from my mopho
but if i install clemsyn kernel i lost all my data, the kernel reset all the tablet?
thanks
????? some help?
You wont lose any of your data. Just flash it via CWM Recovery without wiping/formatting.
I am having a problem with connecting to my TV via HDMI. When I connect my Xoom to my TV via HDMI, after about 5 seconds the Xoom freezes and I have to restart the Xoom.
It freezes but the picture is still output to the TV, though obviously I cannot do anything with it.
I know the problem lies with my TV as I have tried the Xoom connected to other TV's via HDMI and it works fine.
I have tried it with Anynet+ (HDMI-CEC) set to both On & Off, also tried connecting with the TV Off and On.
It did work 1 time and I had no problem with it all evening, came back the next day and it froze again.
I am connecting using a Micro-HDMI to HDMI adapter to connect a full size HDMI cable to the Xoom. I have tried multiple HDMI cables and connected using the same cables to a different TV to make sure the cables were not the problem, but it worked fine.
I have also tried connecting via the HD Speaker Dock with the same results.
I am running the Tiamat 2.2.2 "Moray" Rom with the 1.4.3 Rouge "Rana" Kernal
Any help or pointers would be greatly appreciated as I'm starting to pull my hair out and I really cant afford to loose anymore
Have you tried a different HDMI port?
brandogg said:
Have you tried a different HDMI port?
Click to expand...
Click to collapse
Yep, tried all 3 HDMI ports
how far is the xoom from the tv? i had a problem with the xoom's screen not responding, noticed that the plasma tv's heat emissions were screwing with the touch screen.
Thanks for the responses I have got it working now.
I installed the Eos ICS ROM and it worked fine, so reinstalled the Tiamat 2.2.2 "Moray" Rom and its working. Maybe an app that I had installed was causing the problem, I will find out over the next few days as I reinstall my apps.
I've had a TF700T since the release day...upgrading from the Prime and the TF101 before that. When I first received it, I tested out all of the features, including HDMI out, to make sure that everything was in working order. I even watched a few movies using the HDMI out. Now, all of a sudden, my tablet does not seem to recognize when an HDMI cable is plugged in and connected to a TV. I've tried several different cables and TVs, including the ones it worked on/with previously, and nothing.
Does anyone have any ideas on what could be causing this? I have a few video players installed, and thought that one of them might be causing the issue, but they were all installed on Day 1, and there when it was working before.
Oh, and I'm not rooted or unlocked. Running with stock firmware for now.
You thoughts/assistance is much appreciated.
wouldnt know what to suggest except a factory reset
try a reboot, reset?
sent from LG optimus s (republic wireless) on tapatalk
Haven't gone the reset route yet...I'm sure that will probably fix it, but it just seems like a royal PITA. Since I'm pretty sure that JB is around the corner, I'm going to try and hold out and hope that fixes it. If not, I'll wipe and re-install. Was hoping that someone in the forums might have had an alternate solution.
I had the same happen to me with my Prime. The 1st time the hdmi port was actually loose and I had to rma. The 2nd Prime it happened again but when I brought it back to best buy the Greek squad did a factory reset and it started working again.
If the connection is not loose, try a factory reset (I know - it's a pain). If not you may need to RMA.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
clenz said:
I had the same happen to me with my Prime. The 1st time the hdmi port was actually loose and I had to rma. The 2nd Prime it happened again but when I brought it back to best buy the Greek squad did a factory reset and it started working again.
If the connection is not loose, try a factory reset (I know - it's a pain). If not you may need to RMA.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
and you can always back up your stuff (front page had an app to do just that)
sent from LG optimus s (republic wireless) on tapatalk
seanford said:
Haven't gone the reset route yet...I'm sure that will probably fix it, but it just seems like a royal PITA. Since I'm pretty sure that JB is around the corner, I'm going to try and hold out and hope that fixes it. If not, I'll wipe and re-install. Was hoping that someone in the forums might have had an alternate solution.
Click to expand...
Click to collapse
JB install will very well fix it. Not because JB might have a fix, but because installing JB will reset your tablet.
---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------
I have inconsistent successful HDMI connections with both the Infinity and the Transformer Prime.
The simplest solution is just to unplug and replug the HDMI cable from the tablet if you don't see anything on your TV screen when you plug it in the first time. It will usually show on the HDTV screen, after a quick disconnect reconnect of the cable.
seanford said:
...I tested out all of the features, including HDMI out.... Now, all of a sudden, my tablet does not seem to recognize when an HDMI cable is plugged in and connected to a TV. I've tried several different cables and TVs....
Click to expand...
Click to collapse
I'm not sure. My thinking, check your cables on other devices to confirm they're good. I had an issue when I got mine, but it was a short in the cable. I thought it may have been the port at first, but tried a second microHDMI cable, and no issues.
Other than that, what have you updated or install prior to last using the HDMI port? DId you try uninstalling those apps? There may be some kind of driver conflict.
When you have the cable plugged in, see if you get the HDMI options stuff in settings. Maybe there is setting you can change that may help. I know it shows up when the cable plugged in, but I don't remember what settings you could change other than stuff with 3D.
I have the same problem!
I've been connecting the tablet to a Samsung monitor via HDMI for three days now, succesfully too. I then went to work, connected the tablet to a display via VGA, and it worked. Tried again in the afternoon with the same monitor, randomly didn't work. Came home, now the HDMI randomly doesn't work! What is going on there?! A factory reset just for HDMI seems ridiculous but it's that or returning the tablet. No idea if the VGA converter (official ASUS) has damaged the port after I pulled it out?!
My TF-101 external interface is messed up. When I plug into my keyboard, the keyboard works, but USB and SD cards aren't recognized. When I try and connect directly to my PC (Linux or Windows) my transformer is not recognized. I tried to boot into apx mode, and my transformer will not do it.
I've tried switching MTP on and off, usb debug on and off--nothing.
I opened my transformer and switched out the physical interface port with my other working transformer, and it made no difference (i.e. it is not the physical transformer port).
any ideas or suggestions?
What ROM/firmware are you running?
Judging from your tests, it tells me there's 2 possibilities:
1. Software is creating the problem
2. The issue is deeper than the USB interface, could be the controller on the board or a number of other hardware issues.
Can you still boot in recovery? If so and if you're rooted, do a nandroid backup just in case. Also do a full backup of your data and copy over wifi using samba or airadb or ftp or etc. Then do a complete flash using easyflasher, get it back to stock. Check if the problem persists. If yes, then I'd assume it's something hardware. You could compare voltage at different test spots on the board.
Edit: I assume APX/transfers work while not docked?
The USB and SD cards are on a different circuit from POWER from the dock, as well as the physical KEYBOARD. I am pretty sure the touchpad is also on the USB/SD circuit, so I would bet that is not working.
Most likely this is an issue with that circuit/board on the dock.
As far as PC detection, I would try getting a new cable. I (and other) have had an issue where our tablets were NOT recognized by multiple PC's, but using the same cord did work to power the device to charge it from the Asus wall wart. My cable has been badly abused by about 12 trips around the world in the last 2 years.
Thanks but it's not the cable given that I have a second transformer working fine on it. I'm on a stock non-rooted build on this one. (The other working transformer is stock, rooted).
Perplexing. Keyboard works with other transformer, as well.
Sent from my SCH-I605 using Tapatalk 2
splashd1 said:
Thanks but it's not the cable given that I have a second transformer working fine on it. I'm on a stock non-rooted build on this one. (The other working transformer is stock, rooted).
Perplexing. Keyboard works with other transformer, as well.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Just to lay out the symptoms: No connectivity with computer (Linux or WIndows) over USB when transformer is booted normally. Transformer does not come up in APX mode. I'm plugging directly into tablet with a known good cable. No hardware problem with connector (pins are good).
Running pure stock US 9.2.1.27 (ICS 4.0.3)
Can boot recovery, but have no good update to use. Anyone with a tutorial on how to "update" a downgrade to honeycomb using stock recovery and a microsd, I'm listening.
thanks,
splashd1 said:
Just to lay out the symptoms: No connectivity with computer (Linux or WIndows) over USB when transformer is booted normally. Transformer does not come up in APX mode. I'm plugging directly into tablet with a known good cable. No hardware problem with connector (pins are good).
Running pure stock US 9.2.1.27 (ICS 4.0.3)
Can boot recovery, but have no good update to use. Anyone with a tutorial on how to "update" a downgrade to honeycomb using stock recovery and a microsd, I'm listening.
thanks,
Click to expand...
Click to collapse
You will need to use Wolf's Downgrade method to install an older recovery from the HC firmware you want to flash.
Since your computers don't recognize it, you cannot downgrade as you need ADB via USB working.
How do you know it is a good cable? My original cable works to charge just fine, but one or both of the data wires (pins 2&3) are not working so it is basically just a charging cable.
Got a new cable and computers can detect it.
frederuco said:
You will need to use Wolf's Downgrade method to install an older recovery from the HC firmware you want to flash.
Since your computers don't recognize it, you cannot downgrade as you need ADB via USB working.
How do you know it is a good cable? My original cable works to charge just fine, but one or both of the data wires (pins 2&3) are not working so it is basically just a charging cable.
Got a new cable and computers can detect it.
Click to expand...
Click to collapse
It's a good cable because I have a second TF-101 that works fine with that cable and my spare good cable...I wish it were a bad cable, that would be the easy fix...