Database Info

Please Help Micromax A87 not connecting

I recently purchased micromax a87 as my budget phone so i really want to connect it to my computer and run an app on it which i have developed through Android SDK.
But I am facing problem in connecting the phone to my computer via USB. The PC always shows that no device is connected. But the Device shows that it connected successfully.
I tried to install the drivers from here micromaxsuperfone.com/products/PDF/A87.zip but let alone run the software budged to even install.
Can someone help me to connect my phone to the PC so that i can rum my app on it.

hi
i was unfortunately lost my stock recovery while i used rom manager
my problem is here-
1 i tried flash stock recovery.img through fastboot method.
cmd says error cannot load recovery.img
-my device serial detected
-adb interface found
-device absolutely on fastboot mode
-56times tried.
2 method is terminal emulator
error-flash image not found.
-but recovery.img in root sd card
-tried approx.59times but no luck.
i followed many methods still no stock recovery''
kindly help someone-iam totaly disappointed by this device.
atleast cmw
r factory stock rom @ if i want this i must need stock rom
i m crying nothng was helped me.
help me '
Sent from my Micromax A87 using xda app-developers app
Sent from my Micromax A87 using xda app-developers app

orphansmith said:
hi
i was unfortunately lost my stock recovery while i used rom manager
my problem is here-
1 i tried flash stock recovery.img through fastboot method.
cmd says error cannot load recovery.img
-my device serial detected
-adb interface found
-device absolutely on fastboot mode
-56times tried.
2 method is terminal emulator
error-flash image not found.
-but recovery.img in root sd card
-tried approx.59times but no luck.
i followed many methods still no stock recovery''
kindly help someone-iam totaly disappointed by this device.
atleast cmw
r factory stock rom @ if i want this i must need stock rom
i m crying nothng was helped me.
help me '
Sent from my Micromax A87 using xda app-developers app
Sent from my Micromax A87 using xda app-developers app
Click to expand...
Click to collapse
Please familiarize yourself with forum rules and post your question once. Double posting is not allowed and your other multiple posts have been deleted. Thank you.

vibhas777 said:
I recently purchased micromax a87 as my budget phone so i really want to connect it to my computer and run an app on it which i have developed through Android SDK.
But I am facing problem in connecting the phone to my computer via USB. The PC always shows that no device is connected. But the Device shows that it connected successfully.
I tried to install the drivers from here micromaxsuperfone.com/products/PDF/A87.zip but let alone run the software budged to even install.
Can someone help me to connect my phone to the PC so that i can rum my app on it.
Click to expand...
Click to collapse
follow this to solve -
http://forum.xda-developers.com/showthread.php?p=33071477#post33071477

Follow the MMX A87 link in my sigh
All what you want is there

[Q] unbrick lava xolo a500

please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do

Have u tried enter the emergency mode?
Sent from my WT19i using xda premium

ur phone has which cpu??? mence mtk or other??

Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge

Do u have ur mobile model stock rom??
Sent from my Micromax A116 using xda premium

daviyankee said:
please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do
Click to expand...
Click to collapse
Download Stock/ custom rom for XOLO A500 (Search In google or XDA )
Download CWM Recovery
Place Rom in memory card
Remove and install battery press vol up then press power key to get bootloader mode
flash this CWM recovery then flash rom through CWM

A500 Not booting
professor_proton said:
Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge
Click to expand...
Click to collapse
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps

sonujain10 said:
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps
Click to expand...
Click to collapse
download cwm recovery from here https://www.dropbox.com/s/h3w1doejuh3ecq4/cwm_a500.img
flash using fastboot (bootloader)
reboot to recovery
cwm 6 will be there
flash stock rom

Xolo q500 softbricked
Can Anyone Help me. My Xolo Q500 is softbricked. It is niether booting normally nor booting to recovery menu. I have tried sp flash tools but the stock rom of my phone which i downloaded does not contain any scatter file, probably because it is a Qualcomm based device. Please help me..................

xolo q500 dead after formatted
sir please help me i do have the same problem
xolo q 500 i soft bricked using format while connect in the smart upgared tool
i tried to flash but its ask disk to be formatted i am unaware of it so i mistakenly formatted now the phone is not getting turn on
or in the recovery mode please help or tell me the procedure

[Q] brick android phone

hi forum i format my zte startext 2 android phone data and boot after do this my phone not start only open clockworkmod recovery i download a rom i instal that rom usin cwm recovery after installing phone restart and now only show startext written in green on screen now i can`t run cwm recovery when i plugin usb cable same screen appears no charging screen show and no responce on pc but today when i hold and press both volume up and down button and connect usb cable screen remain off but in my pc it appears zte technologies i instaal zte usb drivers but phone not show can anyone help me i wanna install cwm recovery but adb tool says device not found

Do you format or just factory reset it.?
Sent from my GT-S6812 using XDA Premium 4 mobile app

[Completed] [Q] Bricked Phone

So , I managed to brick my Walton Primo S2 somehow. I have adb and usb drivers installed and I downloaded a stock rom firmware from internet. the thing is , my only will only get detected by adb in recovery mode , I tried booting it to fastboot but won't get detected anymore. Wipe data/factory reset doesn't work. Any ideea what I can do ? I really need help.
I have CWM - 6.0.37 for primos2

Hi, thank you for using XDA Assist. Boot your device into download and attached it to your pc. On your pc go into device manager. Do you see an icon with a yellow exclamation mark? If so right click it and go to where it lets you choose from a list on your computer. Choose Android abd composite interface.

Thread closed.

Infinix note 3 X601 problem

Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.

Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com

jwoegerbauer said:
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
Click to expand...
Click to collapse
yes I did but still not working

ahmwwd said:
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Click to expand...
Click to collapse
Flash it using SP flash tool

mvikrant97 said:
Flash it using SP flash tool
Click to expand...
Click to collapse
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc

ahmwwd said:
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
Click to expand...
Click to collapse
Please setup MTK drivers first and add filter using lib usb.