hi forum i format my zte startext 2 android phone data and boot after do this my phone not start only open clockworkmod recovery i download a rom i instal that rom usin cwm recovery after installing phone restart and now only show startext written in green on screen now i can`t run cwm recovery when i plugin usb cable same screen appears no charging screen show and no responce on pc but today when i hold and press both volume up and down button and connect usb cable screen remain off but in my pc it appears zte technologies i instaal zte usb drivers but phone not show can anyone help me i wanna install cwm recovery but adb tool says device not found
Do you format or just factory reset it.?
Sent from my GT-S6812 using XDA Premium 4 mobile app
Related
My android tablet is stuck at boot screen ... i cant access CWM...:crying:
when i tried to connect it with pc ...the USB is not recogonized and i am not able to reflash it ....pls help...
athulll07 said:
My android tablet is stuck at boot screen ... i cant access CWM...:crying:
when i tried to connect it with pc ...the USB is not recogonized and i am not able to reflash it ....pls help...
Click to expand...
Click to collapse
i think your tab is bricked...
to connect your device to your pc...try installing usb drivers for your tab...
and..
to flash it yu need to get into the download mod of your device..only then yu can flash it...
TT95 said:
i think your tab is bricked...
to connect your device to your pc...try installing usb drivers for your tab...
and..
to flash it yu need to get into the download mod of your device..only then yu can flash it...
Click to expand...
Click to collapse
How to install drivers ?? when i plug my tab into pc nothing happens ..... i cant access download mode or recovery mod ...pls help..
Try rebooting in recovery mode directly with some button combination.It happend with my htc explorer once.Only thing worked is rebooting in recovery mode and doing factory reset( for HTC explorer it is power + volume down key )
maheshhraut said:
Try rebooting in recovery mode directly with some button combination.It happend with my htc explorer once.Only thing worked is rebooting in recovery mode and doing factory reset( for HTC explorer it is power + volume down key )
Click to expand...
Click to collapse
i tried it ...i tried all types of combinations...it didnt work
athulll07 said:
My android tablet is stuck at boot screen ... i cant access CWM...:crying:
when i tried to connect it with pc ...the USB is not recogonized and i am not able to reflash it ....pls help...
Click to expand...
Click to collapse
Follow this guide and install these OEM USB Drivers => OEM USB Drivers
athulll07 said:
How to install drivers ?? when i plug my tab into pc nothing happens ..... i cant access download mode or recovery mod ...pls help..
Click to expand...
Click to collapse
hope yu have followed the guide given to yu by philos64..
it will help..
after installing driver try booting into download mode of your tablet...than only yu can flash your phone with a firmware..
Hi so yesterday I tryed to install the android Rom stock 4.0.4 For my xperia j but I cant enter to flashmode I unplug the cable & turned of the phone but when I holding the VOL - and connect the phone to the pc the led is changed to green and only vibtate but flashtool dont detect the phone and with cwm I cant enter to them I installed the cwm with the pc with a .bat file but I not installed a kernel
And nothing only the cwm but when I try to go to cwm and I press the vol - constantly in the sony logo the phone is turning off no go to cwm can anyone help me?.
NOTE:
Phone is rooted
The bootloader of my phone cant be unlocked because the text with allowed bla bla bla says: No
And the vol - button working perfectly
Sent from my ST26a using XDA Free mobile app
HI Guys,
I tried rooting and flashing CWM in my fiancee mobile (Samsung Galaxy core GT-i8262,Indian version). I rooted the phone successfully and Iflashed CWM using adb method using some guides here. But after flashing |cWM, i tried rebooting in to CWM recovery and recovery came fine. But When I select "Reboot to System" from CWM, it again rebooting to CWM only.. I thought I soft bricked my phone and tried to flash the stock firmware via odin.
But I shocked by seeing the USB drivers are not recognized by PC. I can see yellow mark in Samsung USB CDC Composite devivce" .. So ODIN also not recognizing my phone...
Can you guys help unbricking my phone.. I can go to download mode using CWM recovery. But My problem is USB error...
Kindly help.. any help would be appreciated.
PS: I tried unstalled the drivers in Device manager,installed again, tried rebooting my PC, tried installing again the USB drivers, tried Installing Samsung kies.. but still the yellow mark is showing.. Once the USB issue fixed, I can flash the firmware my self... Thanks in Advance....
hi man...
i face the same thing
1-download drivers for your core gti8262
2-install it on your pc
3-down and install odin
4-conect your phone in download manager
5-now reinstall the cwm recovery
6-install the rom u want from your sdcard in the cwm recovery
7-boot your phone and all done
so sorry for my bad en language..
Try to Connect with different usb cables! I think the prob is with ur cable. If it's not u will need a USB Jig to boot into Download mode,U can find it online & purchase it from abroad. -Hope it helps!
So , I managed to brick my Walton Primo S2 somehow. I have adb and usb drivers installed and I downloaded a stock rom firmware from internet. the thing is , my only will only get detected by adb in recovery mode , I tried booting it to fastboot but won't get detected anymore. Wipe data/factory reset doesn't work. Any ideea what I can do ? I really need help.
I have CWM - 6.0.37 for primos2
Hi, thank you for using XDA Assist. Boot your device into download and attached it to your pc. On your pc go into device manager. Do you see an icon with a yellow exclamation mark? If so right click it and go to where it lets you choose from a list on your computer. Choose Android abd composite interface.
Thread closed.
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
jwoegerbauer said:
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
Click to expand...
Click to collapse
yes I did but still not working
ahmwwd said:
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Click to expand...
Click to collapse
Flash it using SP flash tool
mvikrant97 said:
Flash it using SP flash tool
Click to expand...
Click to collapse
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
ahmwwd said:
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
Click to expand...
Click to collapse
Please setup MTK drivers first and add filter using lib usb.