So , I managed to brick my Walton Primo S2 somehow. I have adb and usb drivers installed and I downloaded a stock rom firmware from internet. the thing is , my only will only get detected by adb in recovery mode , I tried booting it to fastboot but won't get detected anymore. Wipe data/factory reset doesn't work. Any ideea what I can do ? I really need help.
I have CWM - 6.0.37 for primos2
Hi, thank you for using XDA Assist. Boot your device into download and attached it to your pc. On your pc go into device manager. Do you see an icon with a yellow exclamation mark? If so right click it and go to where it lets you choose from a list on your computer. Choose Android abd composite interface.
Thread closed.
Related
hi forum i format my zte startext 2 android phone data and boot after do this my phone not start only open clockworkmod recovery i download a rom i instal that rom usin cwm recovery after installing phone restart and now only show startext written in green on screen now i can`t run cwm recovery when i plugin usb cable same screen appears no charging screen show and no responce on pc but today when i hold and press both volume up and down button and connect usb cable screen remain off but in my pc it appears zte technologies i instaal zte usb drivers but phone not show can anyone help me i wanna install cwm recovery but adb tool says device not found
Do you format or just factory reset it.?
Sent from my GT-S6812 using XDA Premium 4 mobile app
HI Guys,
I tried rooting and flashing CWM in my fiancee mobile (Samsung Galaxy core GT-i8262,Indian version). I rooted the phone successfully and Iflashed CWM using adb method using some guides here. But after flashing |cWM, i tried rebooting in to CWM recovery and recovery came fine. But When I select "Reboot to System" from CWM, it again rebooting to CWM only.. I thought I soft bricked my phone and tried to flash the stock firmware via odin.
But I shocked by seeing the USB drivers are not recognized by PC. I can see yellow mark in Samsung USB CDC Composite devivce" .. So ODIN also not recognizing my phone...
Can you guys help unbricking my phone.. I can go to download mode using CWM recovery. But My problem is USB error...
Kindly help.. any help would be appreciated.
PS: I tried unstalled the drivers in Device manager,installed again, tried rebooting my PC, tried installing again the USB drivers, tried Installing Samsung kies.. but still the yellow mark is showing.. Once the USB issue fixed, I can flash the firmware my self... Thanks in Advance....
hi man...
i face the same thing
1-download drivers for your core gti8262
2-install it on your pc
3-down and install odin
4-conect your phone in download manager
5-now reinstall the cwm recovery
6-install the rom u want from your sdcard in the cwm recovery
7-boot your phone and all done
so sorry for my bad en language..
Try to Connect with different usb cables! I think the prob is with ur cable. If it's not u will need a USB Jig to boot into Download mode,U can find it online & purchase it from abroad. -Hope it helps!
my device is EVERCOSS AT1A
i got bootloop after go to advanced menu on CWM and choose format system
i still can enter device logo when turn my phone on
but i cant enter recovery mode
bateray non-removable
the tablet can connect to pc but it show as unknow device so i cant instal driver so i cant flash it
help me.... thank you
XDA Visitor said:
my device is EVERCOSS AT1A
i got bootloop after go to advanced menu on CWM and choose format system
i still can enter device logo when turn my phone on
but i cant enter recovery mode
bateray non-removable
the tablet can connect to pc but it show as unknow device so i cant instal driver so i cant flash it
help me.... thank you
Click to expand...
Click to collapse
Sounds like a hard brick.
If neither recovery mode nor flash/download mode works, you can't do much yourself.
Check this thread about CWM on a similar device: [ROOT] [GUIDE] [CWM] For Evercoss A7A MTK 6572 100% Working Root Guide.
Maybe you find a way to get your tablet recognized on a PC so that you can flash back a working recovery/firmware.
If you are registered xda, you can also post in the Android Q&A, Help & Troubleshooting forum.
Good luck !
Thread closed. Thank you.
I have a GT SGH-i497 from AT&T. I rooted and flashed CWM recovery and CF-Auto-Root-espresso10att-espresso10uc-samsungsghi497.tar.md5 ROM. Everything was working great. Then I decided to flash TWRP recovery via TWRP Android app and not thru recovery, just to check TWRP out. Now tablet will not boot. PC would recognize it in device manager as QHSUSB_DLOAD. I then attempted to push the custom ROM and TWRP to SD card on tablet via ADB/ Fastboot. After doing so the tablet still does not boot and now my PC chimes when I connect the tablet, but in device manager it now says it is unknown. If I hold the power button while connected the PC chimes off and on. I have searched all forums all the way back to 2012, and I have not found any help. Does anyone here know what I can do to get my tablet back? Any and all help is appreciated. Thanks......:good:
Mr_Mxyzptlk said:
I have a GT SGH-i497 from AT&T. I rooted and flashed CWM recovery and CF-Auto-Root-espresso10att-espresso10uc-samsungsghi497.tar.md5 ROM. Everything was working great. Then I decided to flash TWRP recovery via TWRP Android app and not thru recovery, just to check TWRP out. Now tablet will not boot. PC would recognize it in device manager as QHSUSB_DLOAD. I then attempted to push the custom ROM and TWRP to SD card on tablet via ADB/ Fastboot. After doing so the tablet still does not boot and now my PC chimes when I connect the tablet, but in device manager it now says it is unknown. If I hold the power button while connected the PC chimes off and on. I have searched all forums all the way back to 2012, and I have not found any help. Does anyone here know what I can do to get my tablet back? Any and all help is appreciated. Thanks......:good:
Click to expand...
Click to collapse
try with odin and stock firmware
sergio_f said:
try with odin and stock firmware
Click to expand...
Click to collapse
Odin does not recognize the tablet.
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
sergio_f said:
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
Click to expand...
Click to collapse
Yes, in my initial post I stated that I pushed ROM and TWRP to tablet sdcard via ADB/ Fastboot, I read they install with the android drivers. But I will try the uninstall and search for the usbeview. Thanks for help I will post my findings/ results later this evening. :good:
odin recognize tablet if you boot it in download mode
power & vol buttons
regards
sergio_f said:
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
Click to expand...
Click to collapse
usbdeview worked to the driver status. I installed the QHSUSB_DLOAD drivers on PC and the PC now recognizes tablet when connected. Does anyone know where I can download the debrick image for the galaxy tab 2 10.1 AT&T model? Thanks
Mr_Mxyzptlk said:
usbdeview worked to the driver status. I installed the QHSUSB_DLOAD drivers on PC and the PC now recognizes tablet when connected. Does anyone know where I can download the debrick image for the galaxy tab 2 10.1 AT&T model? Thanks
Click to expand...
Click to collapse
There is none available, in my thread I asked the community to share from their working tabs. I haven't got any. Plus nobody has tried that method. It works or is it just a theory? we still don't know.
Hi,
I tried installing NucleaRom-V1.3.3 BETA on my CyanogenMod 13 and successfully installed but when I hit the reboot option, my mobile got stuck on logo page and doesn't do anything. I waited for 1 hour but no changes. Now I wanted to install the previous version again via ADB tool but its shows errorr: device unauthorized as my USB debugging is not ON and not accessible anymore. I am currently in my recovery mode option on my mobile. How to copy my zip files via ADB? Please help!!!
hampalle said:
Hi,
I tried installing NucleaRom-V1.3.3 BETA on my CyanogenMod 13 and successfully installed but when I hit the reboot option, my mobile got stuck on logo page and doesn't do anything. I waited for 1 hour but no changes. Now I wanted to install the previous version again via ADB tool but its shows errorr: device unauthorized as my USB debugging is not ON and not accessible anymore. I am currently in my recovery mode option on my mobile. How to copy my zip files via ADB? Please help!!!
Click to expand...
Click to collapse
Greetings and welcome to assist. I found this thread that should help
https://forum.xda-developers.com/zuk-z1/help/bricked-zuk-z1-t3277257/post64458076#post64458076
post 4 tells you how to flash the rom through recovery
Good Luck
Sawdoctor