I have a GT SGH-i497 from AT&T. I rooted and flashed CWM recovery and CF-Auto-Root-espresso10att-espresso10uc-samsungsghi497.tar.md5 ROM. Everything was working great. Then I decided to flash TWRP recovery via TWRP Android app and not thru recovery, just to check TWRP out. Now tablet will not boot. PC would recognize it in device manager as QHSUSB_DLOAD. I then attempted to push the custom ROM and TWRP to SD card on tablet via ADB/ Fastboot. After doing so the tablet still does not boot and now my PC chimes when I connect the tablet, but in device manager it now says it is unknown. If I hold the power button while connected the PC chimes off and on. I have searched all forums all the way back to 2012, and I have not found any help. Does anyone here know what I can do to get my tablet back? Any and all help is appreciated. Thanks......:good:
Mr_Mxyzptlk said:
I have a GT SGH-i497 from AT&T. I rooted and flashed CWM recovery and CF-Auto-Root-espresso10att-espresso10uc-samsungsghi497.tar.md5 ROM. Everything was working great. Then I decided to flash TWRP recovery via TWRP Android app and not thru recovery, just to check TWRP out. Now tablet will not boot. PC would recognize it in device manager as QHSUSB_DLOAD. I then attempted to push the custom ROM and TWRP to SD card on tablet via ADB/ Fastboot. After doing so the tablet still does not boot and now my PC chimes when I connect the tablet, but in device manager it now says it is unknown. If I hold the power button while connected the PC chimes off and on. I have searched all forums all the way back to 2012, and I have not found any help. Does anyone here know what I can do to get my tablet back? Any and all help is appreciated. Thanks......:good:
Click to expand...
Click to collapse
try with odin and stock firmware
sergio_f said:
try with odin and stock firmware
Click to expand...
Click to collapse
Odin does not recognize the tablet.
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
sergio_f said:
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
Click to expand...
Click to collapse
Yes, in my initial post I stated that I pushed ROM and TWRP to tablet sdcard via ADB/ Fastboot, I read they install with the android drivers. But I will try the uninstall and search for the usbeview. Thanks for help I will post my findings/ results later this evening. :good:
odin recognize tablet if you boot it in download mode
power & vol buttons
regards
sergio_f said:
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
Click to expand...
Click to collapse
usbdeview worked to the driver status. I installed the QHSUSB_DLOAD drivers on PC and the PC now recognizes tablet when connected. Does anyone know where I can download the debrick image for the galaxy tab 2 10.1 AT&T model? Thanks
Mr_Mxyzptlk said:
usbdeview worked to the driver status. I installed the QHSUSB_DLOAD drivers on PC and the PC now recognizes tablet when connected. Does anyone know where I can download the debrick image for the galaxy tab 2 10.1 AT&T model? Thanks
Click to expand...
Click to collapse
There is none available, in my thread I asked the community to share from their working tabs. I haven't got any. Plus nobody has tried that method. It works or is it just a theory? we still don't know.
Related
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Install latest samsung driver
flash samsung firmware via odin
Abhi04 said:
Install latest samsung driver
flash samsung firmware via odin
Click to expand...
Click to collapse
He said that he installed the drivers.Try to uninstall them and install Kies from Samsung and try to connect with that,but you need to flash the stock firmware via Odin
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
gabyif said:
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?
Click to expand...
Click to collapse
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.
mohitum007 said:
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.
Click to expand...
Click to collapse
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640
gabyif said:
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640
Click to expand...
Click to collapse
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.
mohitum007 said:
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.
Click to expand...
Click to collapse
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone
gabyif said:
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone
Click to expand...
Click to collapse
But it is not recognized in download mode too......:'(
mohitum007 said:
But it is not recognized in download mode too......:'(
Click to expand...
Click to collapse
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium
soham jambhekar said:
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Ok i will try that too...and check if it works !!!
Do you have any download link for latest drivers?
www.mediafire.com/?h4waxh8r5twuwuq
this is the link to samsung usb driver installer
Sent from my GT-S5670 using xda premium
not connect kaise
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??
nirajkrm1 said:
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??
Click to expand...
Click to collapse
Maybe your baseband version isn't of ur country/region. Also check ur drivers
Sent Via XDA™ Premium
IT seems to me that u tried to instal cm10.1 with stock recovery( isn't it). if u did u probably soft bricked ur device.. if not if u hv installed cwm recovery 5 by tj style using odin multi downloader...then tried to install cm10.1 then wipe data and try installing the rom again....
Second; if u hv stock recovery + soft bricked ur device and u cannot connect to ur computer then probably u hv no choice but to goto local mobile repair center... in your device the charging ic may have been damaged which will they replace for rs.200/- and flashing ur device back to normal will cost u rs.200/- extra....using their circuits..something z-box....
third; if u went to authorised samsung care they will blindly charge u rs.4000/- for changing motherboard and messing up the software...which noboy wants.. or ucan makeup a story and fool them and replace ur motherboard if under warranty...
fourth; try to check with local mobile repairwallah and u can yourself flash stock rom at local internet cafe...and then root then instal cwm5 recovery then install diifferent roms for our device.....
take care..:good: luck
i need a recovery for galaxy fit
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
bosi255 said:
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
Click to expand...
Click to collapse
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
Yes, but here is more precise link:
http://forum.xda-developers.com/showthread.php?t=2413137#4
please help me
ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
yes i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp
helppp
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp
Hello,
I've got a Galaxy Note 10.1 (N8020). First, I have flashed 4.4.2 via Mobile ODIN, then I noticed, that the Wi-Fi didn't work, so tried reinstall Jelly Bean. I used Mobile ODIN because my pc and laptop didn't recognize the USB. Why?
Now, I've got bootloop. I can't connect to PC with download mode, it don't recognize. It's very annoying.
What could be the problem? The USB cable? Its the original cable that came with the tablet.
What can I do? I can enter the stock recovery, and download mode.
I can only go to stock recovery, I can't flash Philz cwm.
If there's a root zip that i can install in stock recovery, I would be happy.
Please help, my family will kill me :laugh:
Thanks
Do you have the driver installed for the Note 10.1 on your computer? If not, you can get it by installer Kies (you don't need to use Kies, you just need it for the driver).
Yes, its installed.
Now I can boot, but I lost all my data.
But I still can't connect to PC.
Why?!
HI Guys,
I tried rooting and flashing CWM in my fiancee mobile (Samsung Galaxy core GT-i8262,Indian version). I rooted the phone successfully and Iflashed CWM using adb method using some guides here. But after flashing |cWM, i tried rebooting in to CWM recovery and recovery came fine. But When I select "Reboot to System" from CWM, it again rebooting to CWM only.. I thought I soft bricked my phone and tried to flash the stock firmware via odin.
But I shocked by seeing the USB drivers are not recognized by PC. I can see yellow mark in Samsung USB CDC Composite devivce" .. So ODIN also not recognizing my phone...
Can you guys help unbricking my phone.. I can go to download mode using CWM recovery. But My problem is USB error...
Kindly help.. any help would be appreciated.
PS: I tried unstalled the drivers in Device manager,installed again, tried rebooting my PC, tried installing again the USB drivers, tried Installing Samsung kies.. but still the yellow mark is showing.. Once the USB issue fixed, I can flash the firmware my self... Thanks in Advance....
hi man...
i face the same thing
1-download drivers for your core gti8262
2-install it on your pc
3-down and install odin
4-conect your phone in download manager
5-now reinstall the cwm recovery
6-install the rom u want from your sdcard in the cwm recovery
7-boot your phone and all done
so sorry for my bad en language..
Try to Connect with different usb cables! I think the prob is with ur cable. If it's not u will need a USB Jig to boot into Download mode,U can find it online & purchase it from abroad. -Hope it helps!
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
Hello Guy's
I have the problem, that my Note 10.1 N8000 cant bootup. If I power on, the Samsung Screen appears and that was it.
I've done nothing on the tablet like:
Unlock BL
Custom ROM
I also cant bootup into the recovery mode. Only the download mode is semi functional. If I boot into dload mode I cant access the device via adb or odin.
Hope anyone can help
Best regards
Schmand
Flash stock rom via Odin .
Schmand said:
If I boot into dload mode I cant access the device via adb or odin.
Click to expand...
Click to collapse
JJEgan said:
Flash stock rom via Odin .
Click to expand...
Click to collapse
Tested at first but as I sad before, odin and adb doesn't recognise the tab.
Schmand said:
Tested at first but as I sad before, odin and adb doesn't recognise the tab.
Click to expand...
Click to collapse
Samsung Drivers installed .
Tried a different USB cable usb port PC .
Try searching your problem on the forum multiple identical posts .