Related
Hello, developers...
I have a karbonn a25 model mobile... I rooted it, and what the mistake i did was that i moved app folder from rom to sd card and the mobile stop responding, now i cannot boot it...everytime i try to boot,it stucks on karbonn logo...and just there..... What do i have to do?
try ubuntu until u get success
zryuk said:
Hello, developers...
I have a karbonn a25 model mobile... I rooted it, and what the mistake i did was that i moved app folder from rom to sd card and the mobile stop responding, now i cannot boot it...everytime i try to boot,it stucks on karbonn logo...and just there..... What do i have to do?
Click to expand...
Click to collapse
well u really had done a big mistake,
u always should touch root files/folders with care..
i hope u r talking about karbonn a25 5inch mobile, which is dual core
as cwm does not support in our mobile, and i cant give u stock rom
u can give a try to ubuntu... it will alive ur phone
Plz help me out,.....
In Karbonn A25 i replaced the sound audio/ui files,first it worked,but with very low sound,so i gained the volume to 400% and as i played it,was loud as expected,then replaced it again in the system ui,but it was not satisfactory,so i made it more loud and replaced,but then one by one there were no sounds,i am able to play and hear them but there is no playback from system ui,....and i tried every tweak,.....like rechecking in audio profile,and restoring audio ui backup,..restarting,...but no use,........ :silly:
need it,...
@thewayur
Can u show me how to install ubuntu on our Karbonn A25,....i am also stuck on boot logo ,.........plz help me out,... :crying:
the thing i did wrong after root is i replaced boot logo and fonts,..is there any way to replace them,..android commander get's access to system partition on mtd block 12,... but need root permission,..which is not possible,........
Naineesh said:
In Karbonn A25 i replaced the sound audio/ui files,first it worked,but with very low sound,so i gained the volume to 400% and as i played it,was loud as expected,then replaced it again in the system ui,but it was not satisfactory,so i made it more loud and replaced,but then one by one there were no sounds,i am able to play and hear them but there is no playback from system ui,....and i tried every tweak,.....like rechecking in audio profile,and restoring audio ui backup,..restarting,...but no use,........ :silly:
Click to expand...
Click to collapse
hey how u gained the sound to 400%?
---------- Post added at 05:18 PM ---------- Previous post was at 05:15 PM ----------
Naineesh said:
@thewayur
Can u show me how to install ubuntu on our Karbonn A25,....i am also stuck on boot logo ,.........plz help me out,... :crying:
the thing i did wrong after root is i replaced boot logo and fonts,..is there any way to replace them,..android commander get's access to system partition on mtd block 12,... but need root permission,..which is not possible,........
Click to expand...
Click to collapse
youtube..there r many
Rly
thewayur said:
hey how u gained the sound to 400%?
---------- Post added at 05:18 PM ---------- Previous post was at 05:15 PM ----------
youtube..there r many
Click to expand...
Click to collapse
Can u give me any link or any specific forum,...which can guide me,.........
Karbonn A25 - Stock Rom or Ported Custom recovery
pls!!!!!!!!!!!! Anyone provide stock rom or any ported custom recovery for karbonn a25!!!!!!!!!!
Help if u can,..now this a challenge for developers,.....
Help us plz,.....i just need root permissions to repair my phone,........adb can be accessed by factory mode,...but's its protected adb which does not give root permission,..if it would have gave me the permission till now phone must have been in a working condition,....just need insecure adb on my phone,.......so i can replace system files and repair my android os,........ :crying: :crying:
Shocking news,....
I have a Karbonn A25 stuck in bootloop,.....i was fed up seeing its bootloop,..so yesterday night i thought,..i will keep the phone loading on bootloop,...i kept the phone on charging on ongoing process bootloop,..it continued,..so at midnight i disconnected supply,....and left the phone on battery loading on booting,..si next morning as i woke up i saw,..the phone switched off as battery was drained i guessed,..so putted it on charging and started the phone,...i saw the normal booting,...but,..it was not loading,..but its was not bootlooping also,..so i removed the battery,..and,..restarted,..in recovery mode,..i thought i will wipe,.data,.i did,...it,..and restarted again in recovery mode,..and did wipe cache partition,..i did it and rebooted,..phone,....and i kept aside,..because,...i had no hopes on it,....but,....after 2 mins,..it booted on fresh os,..showing click here for app menu etc etc,...so it confirmed me that,..it was problem of bootanimation.zip,..i thought to replace,..it,..but bad,..luck,..as i took phone in my hand,..the charger cable disconnected,..and the cable was not of A25,..it was of some other phone,..so it was too much loose,...and phone showed battery warning and the phone shutted down,.. :crying:
and as usual it didn't booted again normally,...as it showed again,...stuck in bootloop,..so anyone have any idea what was it,..
and how can change the bootanimarion without booting up,..just can open in factory mode,...with adb with no root permission,.. :silly:
You need to get it in download mode or fastboot mode. Then u need to install the stock firmware
. Im facing the same problem. I cannot repair it since I dont know how to get it in download mode. Please find out and help me too.
Xavier_99 said:
pls!!!!!!!!!!!! Anyone provide stock rom or any ported custom recovery for karbonn a25!!!!!!!!!!
Click to expand...
Click to collapse
https://www.adrive.com/public/muWAQC/A25_V1..n.rar
HERE is the LINK FOR KARBONN A25 stock rom.
Hi everyone, this is a guide that help you to unbrick Micromax Canvas 2 Plus A110Q.
Follow all the steps carefully
1. Download the stock rom v1 from here . Do not download stock rom v2 from anywhere, that rom contain many bugs.
2. Download sp flash tools form here. (tool needed for flashing rom on the device)
3. Download USB drivers from here
Now you need to install the usb preloader drivers you just downlaoded.
To install the drivers:-
1.Extract the USB drivers.rar file.
2.Switch off your phone
3.Open device manager(search for "Device Manager") or click on computer properties , then device manager..
4.Connect your phone in OFF state
5.There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files from usb drivers you extracted.
NOTE: THIS METHOD WILL NOT WORK ON WINDOWS 8
Now, if you are using windows 8 do this to install the drivers:
1. Dwonlaod the usb driver.rar file.
2. Hover pointer to Top Right corner of your screen, choose Settings from sidebar
3.Click last option "Change PC Settings"
4.Select "General"
5.Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
6.Once screen is back, select option "Troubleshoot"
7.Select "Advanced Options"
8.Select "Startup Settings"
9.Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
10. Choose the win 7 file from usb drivers.rar file to install drivers on windows 8 .
Now,
4. Extract ROM and Flash Tool
5. Open Flash_tool.exe from SP_FLASH Tools.
6.Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from ROM folder
7.Select "Download" option, it will search for phone now.(if does not detect your phone pull the battery out and put it in again.)
8.Switch OFF the phone.
9.Connect it with USB (in OFF state only) (proper divers must be installed as said above)
10.If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means ROM is flashed.(don't panic if there is no green circle just let it work for 10 minutes and unplug your phone from computer.)
11.Remove phone, Switch it ON.
Thanks
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
I tried this and it worked. Successfully unbricked my phone.
Sent from my IQ446 Magic using Tapatalk
supersapien said:
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
Click to expand...
Click to collapse
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
Click to expand...
Click to collapse
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
Click to expand...
Click to collapse
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
ok thanks...
rahulbasu2013 said:
ok thanks...
Click to expand...
Click to collapse
There is a thanks button
Plz help
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Plz
Samuel117 said:
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Click to expand...
Click to collapse
Not any reply plz reply guys i need help
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
Samuel117 said:
Not any reply plz reply guys i need help
Click to expand...
Click to collapse
How did you get into that problem?????
and can you describe in detail?
Using fastboot
rahulbasu2013 said:
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
How did you get into that problem?????
and can you describe in detail?
Click to expand...
Click to collapse
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Samuel117 said:
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Click to expand...
Click to collapse
did you try the unbricking guide??? did that help??
No
rahulbasu2013 said:
did you try the unbricking guide??? did that help??
Click to expand...
Click to collapse
cant able to use those step out of town now not have pc here
It didn't Work.
I did everything correctly, the green circle appeared, still stuck on bootloop. HELP PLZ.
bluetooth not working
hey guyz i have installed custom rom lewa os5 in my canvas a110q, every things works fine but bluetooth is not working. is it rom problem or something else. is there any solution for this? kindly reply me [email protected] thnx.
anyone helpme frnds
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
sai teja badri said:
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
Click to expand...
Click to collapse
Flash v1 and then flash any rom or uboot.bin of v1 via sp tools
Sent from my C2305 using Tapatalk
guyz it cnat detect my phone on device manager....
in other devices in device manager...it shows micromax a110q and the phone just boots ....
plz help
What happened is that, i haven't rooted my phone yet and out of no where it goes into bootloop.
I followed all the steps from installing the drivers - till getting the green circle, but no success
Can you please help me?
Will it help ?
I have the same problem on Phone stuck on boot up....
I Never did any rooting/other software updates to my mobile.
The Problem started when a message like "some XYZ process has stopped"
I clicked OK but the message came 1 after the other many times so I though of rebooting mobile.... I gave reboot option and the problem raised and the phone never did start up. I tried factory reset but still the same........A friend suggested me this But i still want to confirm is it harmless to use this and is this the proper technique for my problem ?
Please Help Me....
I bought a XOLO Q1000 Opus on February 2014. Then I have upgrade (On March 2014) it Android 4.2.2. Yesterday (5th May, 2014) XOLO launched Android Kitkat (4.4) update for XOLO Q1000 Opus. I have tried to upgrade after downloading the update.zip from XOLO website, but after the installation (I am not sure) the system now hanged on boot screen (XOLO logo halts). Please help!! Thanks.
PS: New boot screen has introduced after upgrade process!
edn781 said:
I bought a XOLO Q1000 Opus on February 2014. Then I have upgrade (On March 2014) it Android 4.2.2. Yesterday (5th May, 2014) XOLO launched Android Kitkat (4.4) update for XOLO Q1000 Opus. I have tried to upgrade after downloading the update.zip from XOLO website, but after the installation (I am not sure) the system now hanged on boot screen (XOLO logo halts). Please help!! Thanks.
PS: New boot screen has introduced after upgrade process!
Click to expand...
Click to collapse
Try to perform a factory reset Was your device rooted before you installed the update?
Thanks for your response! But how could I perform a Factory Reset when device could not able to boot?
edn781 said:
Thanks for your response! But how could I perform a Factory Reset when device could not able to boot?
Click to expand...
Click to collapse
To get into Stock Recovery of Xolo Q1000 Opus (Mobiistar touch Lai 504Q in Vietnam) do the following:
1. Hold Power button for 3 seconds till phone vibrates.
2. When Phone Vibrates, Leave the Power button.
3. Quickly press and hold the Volume up button till recovery loads (you probably don't have to hold it that long).
Then perform a factory reset
LS.xD said:
To get into Stock Recovery of Xolo Q1000 Opus (Mobiistar touch Lai 504Q in Vietnam) do the following:
1. Hold Power button for 3 seconds till phone vibrates.
2. When Phone Vibrates, Leave the Power button.
3. Quickly press and hold the Volume up button till recovery loads (you probably don't have to hold it that long).
Then perform a factory reset
Click to expand...
Click to collapse
Me to having problem in kitkat update after updating my phone restart and hang on xolo logo.
and factory reset is not applying as it shows xolo secure has disable wiping feature.
Upgrading Problem of XOLO Q1000 Opus with Android 4.4 Kitkat not working..
Me to having problem in kitkat update after updating my phone restart and hang on xolo logo.
and factory reset is not applying as it shows xolo secure has disable wiping feature
I am also facing same issue .. How can i fix it ..Please
same problem which i too have..
---------- Post added at 10:05 PM ---------- Previous post was at 09:57 PM ----------
edn781 said:
I bought a XOLO Q1000 Opus on February 2014. Then I have upgrade (On March 2014) it Android 4.2.2. Yesterday (5th May, 2014) XOLO launched Android Kitkat (4.4) update for XOLO Q1000 Opus. I have tried to upgrade after downloading the update.zip from XOLO website, but after the installation (I am not sure) the system now hanged on boot screen (XOLO logo halts). Please help!! Thanks.
PS: New boot screen has introduced after upgrade process!
Click to expand...
Click to collapse
did u got any solution ?? :crying:
karthik sai sudhan said:
same problem which i too have..
---------- Post added at 10:05 PM ---------- Previous post was at 09:57 PM ----------
did u got any solution ?? :crying:
Click to expand...
Click to collapse
Nope.. Still same! :crying:
Solution
xoloq1000opus.blogspot.in
edn781 said:
Nope.. Still same! :crying:
Click to expand...
Click to collapse
still its same or done something ?? :/
Done!!!
karthik sai sudhan said:
still its same or done something ?? :/
Click to expand...
Click to collapse
My xolo is working now after i use above blog method.......
no problem in my xolo q1000 opus
ulzan said:
xoloq1000opus.blogspot.in
Click to expand...
Click to collapse
I updated my xolo Q1000 opus with the first update and my wifi ,front camera, graphics(I played asphalt 8 ) was working good.After that boot logo I just performed a factory data reset for my sureity otherwise the kitkat 4.4 was working very good.(without doing factory data reset)
I was having no need to update to that second bug fix update....
I don't know whay??
I am pretty much happy with the update !!!!!LOVE U XOLO!!!!!!!:laugh::good:
unbrick
shubh971 said:
I updated my xolo Q1000 opus with the first update and my wifi ,front camera, graphics(I played asphalt 8 ) was working good.After that boot logo I just performed a factory data reset for my sureity otherwise the kitkat 4.4 was working very good.(without doing factory data reset)
I was having no need to update to that second bug fix update....
I don't know whay??
I am pretty much happy with the update !!!!!LOVE U XOLO!!!!!!!:laugh::good:
Click to expand...
Click to collapse
its great that your phone is workingnow ... i have the way to unbrick this device .. uploading the files will post here in a few minutes
Done!!!
sushant747 said:
its great that your phone is workingnow ... i have the way to unbrick this device .. uploading the files will post here in a few minutes
Click to expand...
Click to collapse
Thanks Man.. You are Awesome!!!! :good: :good: :good:
One more Solution
Hello, if your Device got stuck in the Boot Logo. one more solution is there.
1) Boot your phone into Recovery Mode.
2) Clear Cache Partition
3) Reboot
same problem
Me to having problem in kitkat update after updating my phone restart and hang on xolo logo.and factory reset is not applying as it shows xolo secure has disable wiping feature.
plz help
Downgrade Done 4.4.2 To 4.2.2
Chek
http://xoloq1000opus.blogspot.in/
saddam953 said:
Me to having problem in kitkat update after updating my phone restart and hang on xolo logo.and factory reset is not applying as it shows xolo secure has disable wiping feature.
plz help
Click to expand...
Click to collapse
Check this link:
http://forum.xda-developers.com/showthread.php?t=2757866
I had the same problem. Now my problem solved.
Problem with Kitkat Update
edn781 said:
Check this link:
http://forum.xda-developers.com/showthread.php?t=2757866
I had the same problem. Now my problem solved.
Click to expand...
Click to collapse
Hi, i too updated my opus with the kitkat update as well S011 update.I was able to boot the phone but my network keeps dropping and i am also facing problems in applications.Is there way to fix it or go back to jellybean.
Help will be appreciated!!
thanks
Any custom ROMs?
ok first thing is my english is bad
- i have root my device via farma root with super SU
- today i install android kitkat them available on google play(first option in serach list for kitkat theme)
- after installation nothing happend and don't show open button on that page of google play.
- so i just restart my phone (without uninstalling that theme)
- when its starting it stuck on "CANVAS MAGNUS" logo screen
- i wait for 20 mins but it don't get start
- then i did factry reset from (by pressing power + vol. up buttons)
- still same problem
please give some solution. my phone is in warrenty periodes
K!!nG said:
ok first thing is my english is bad
- i have root my device via farma root with super SU
- today i install android kitkat them available on google play(first option in serach list for kitkat theme)
- after installation nothing happend and don't show open button on that page of google play.
- so i just restart my phone (without uninstalling that theme)
- when its starting it stuck on "CANVAS MAGNUS" logo screen
- i wait for 20 mins but it don't get start
- then i did factry reset from (by pressing power + vol. up buttons)
- still same problem
please give some solution. my phone is in warrenty periodes
Click to expand...
Click to collapse
Flash stock rom using sp tool or use CWM/TWRP to install any other custom rom. It will solve your problem.
Siddhesh.K15 said:
Flash stock rom using sp tool or use CWM/TWRP to install any other custom rom. It will solve your problem.
Click to expand...
Click to collapse
Use this!
Just one click!
ridelight said:
Use this!
Just one click!
Click to expand...
Click to collapse
@ridelight where is the link?
http://forum.xda-developers.com/canvas-magnus/development/micromax-stock-install-one-click-t2758619
Siddhesh.K15 said:
Flash stock rom using sp tool or use CWM/TWRP to install any other custom rom. It will solve your problem.
Click to expand...
Click to collapse
Thanx for solution..
It works gr8 .
Btw.
what is CWM/TWRP??
ridelight said:
http://forum.xda-developers.com/canvas-magnus/development/micromax-stock-install-one-click-t2758619
Click to expand...
Click to collapse
Thnx for stom rom
But its not original
I want original if i get my warrenty back
K!!nG said:
Thanx for solution..
It works gr8 .
Btw.
what is CWM/TWRP??
Click to expand...
Click to collapse
Cwm &Twrp are the custom recoveries using which we can install different custom roms, mods and any which requires root and that's available in zip format can be installed using Cwm\Twrp. And don't just say thanks hit thanks button also , it won't cost you
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
K!!nG said:
Thnx for stom rom
But its not original
I want original if i get my warrenty back
Click to expand...
Click to collapse
Download official rom from this site LINK
Siddhesh.K15 said:
Cwm &Twrp are the custom recoveries using which we can install different custom roms, mods and any which requires root and that's available in zip format can be installed using Cwm\Twrp. And don't just say thanks hit thanks button also , it won't cost you
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
Download official rom from this site
Click to expand...
Click to collapse
Thnx for link but it say File busy
And ask for premium id
i m not a richy rich for premium id's
But thnx for link
And
I can't hit thnx twice in single post i think so.
Its the original rom, only bootlogo chenged by me, the rom is the stock one.
---------- Post added at 09:27 AM ---------- Previous post was at 09:26 AM ----------
Chang rom wiont void hardware warranty
@K!!nG
The link i gave u before is often busy coz of server load.
Dont know what are you saying about "Thanks" but here is the working link of stock rom tested ok
https://drive.google.com/uc?id=0B_nouTN5y1w7S0pGZDVmd2h6S0k
Sent from my Micromax A117 using XDA Premium 4 mobile app
same problem
when i have done a full reset and then tried to restore the applications of my smartphone with the help of titanium backup the problem of hanging on boot screen have arouse on my phone.
will stock ROM will help me in my case too.
reply please, since i am in urgent need of my smartphone.
Try Sp tooling
Have u try SP tooling...it will work 100% bro:good:
thanks
Sek her said:
Have u try SP tooling...it will work 100% bro:good:
Click to expand...
Click to collapse
the custom rom worked perfectly:laugh::laugh:
same problem
K!!nG said:
ok first thing is my english is bad
- i have root my device via farma root with super SU
- today i install android kitkat them available on google play(first option in serach list for kitkat theme)
- after installation nothing happend and don't show open button on that page of google play.
- so i just restart my phone (without uninstalling that theme)
- when its starting it stuck on "CANVAS MAGNUS" logo screen
- i wait for 20 mins but it don't get start
- then i did factry reset from (by pressing power + vol. up buttons)
- still same problem
please give some solution. my phone is in warrenty periodes
Click to expand...
Click to collapse
helo dear,
I did the same. I go to Recovery option and do REBOOT without doing anything. After that it struck on welcome screen. Unfortunately USB Debugging is not ON. Screen hang on with logo CANVAS MAGNUS.
How can i get rid of this problem. pls reply
---------- Post added at 01:06 PM ---------- Previous post was at 12:41 PM ----------
Dear all
my canvas magnus screen hangs on CANVAS MAGNUS logo when starts. Unfortunately USB Debugging is OFF.
This haapened when i rooted my phone and the go to System recovery (volume=power), then i REBOOT my phone.
After that it is getting struck of when logo comes on screen.
pls tell how can i solve this problem. Waiting keenly as i am not able to use my phone.
It is better to flash stock ROM using SP Tools. If you dont know the process, then search about SP Tools and flashing instructions in XDA.
Hello members
I got a strange problem in a Nubia x witch has an official Chinese rom, I want to install gapps but I failed so I decided to unlock the bootloader and flash a twrp recovery so i succeed to install twrp and I wiped the system and cash and by fault I rebooted the phone to system and I got a message :
your device is corrupt. it can't be trusted and will not boot
g.com/abh
I used a command in fastboot and flashed a vbmeta file downloaded from a post in the forum suddenly the device shutt down and power but freezing in logo and when power off detected as QUSB_BULK_SN:C8146BC1 yellow triangle in win10 or win7
I installed all Qualcomm drivers found in internet but no driver works, now no fastboot mode no recovery
Only logo then off and detected a I mentioned above
I used all key combinations but in vain.
Help me I am stucked
Any one to help ?
finally fixed ..............................:good:
f164 said:
finally fixed ..............................:good:
Click to expand...
Click to collapse
please tell me what should i do ?
i suffer the same problem with my nubia x
redasaeed77 said:
please tell me what should i do ?
i suffer the same problem with my nubia x
Click to expand...
Click to collapse
it's fixed :angel::angel:
nubia x
hello good night, i'm having the same problem, how can i ask you please: chorando::chorando:
---------- Post added at 12:29 AM ---------- Previous post was at 12:10 AM ----------
redasaeed77 said:
it's fixed :angel::angel:
Click to expand...
Click to collapse
hello good night, i'm having the same problem, how can i ask you please:chorando::chorando::chorando:
f164 said:
finally fixed ..............................:good:
Click to expand...
Click to collapse
How you fixed it