I wanted to try Jetmod on my funbook , so i flashed zip from sd card. It stop on funbook logo. Then i restored my original rom then tried to install clean ics from funbook gizmolord.
In live suite when it was updating at 2% the usb cable got loose and update failed.Now my funbook doesn't even power up.I tried hard reset but no luck. So it's hard bricked.Anybody please help. :crying:
I too hardbricked my funbook weeks ago luckly it was only 7 days of purchase and they replaced it to me and i got new funbook.......
If your system is not detecting your funbook or detecting as some blahblah driver not found then you hardbricked your funbook...
Now the only option is going to the micromax service centre and say that after a sleep the device was not turning on... That worked for me
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 03:56 PM ---------- Previous post was at 03:52 PM ----------
Also one more thing... Never ever use that f****king live suit again... Live suit bricked funbook numbers are many as i see my search results
Sent from my GT-I9100 using Tapatalk 2
Thanks for the info . I will not use that live suite again. The service center is so far from my location and no gaurantee that it is there as it happened twice with me. Actually i wanted to do something with battery problem.Thanks for the info again & i will use that trick.
Bricked Funbook P310
I have Micromax Funbook P310. I have it rooted and installed CWM Recovery.I tried to install JetRom 3.0 using CWM,when i gave install from zip and yes. It took me to a new menu and i gave next,next,next and it deduct my funbook as Galaxy s advance but installed the rom and rebooted and stuck in Micromax logo, then i left it till the battery drained completely and tried to boot into recovery. For booting into recovery i press Vol up + Power and it show a menu as usual which i use for booting into recovery.It consists of Fastboot,Recovery and Normal. I've tried all of these after installing the Jetrom it powers off, this happen when it shut downs after the mmx logo goes off.When i have charged it for about an hour and tried to boot it into recovery it shows the mmx logo and reboots the process.I have backup of the stock rom but i cant restore it.I tried the method to unbrick Funbook P300 but i dont have back button, i have Vol up,Vol down and power button. I have livesuit downloaded. Plzzzzzzzzz Help me. Its just 6 months before i bought this tab.Plzzzzzzzzzzz:crying::crying:
Hello, Im new to the website and I really need some help.
I rooted my LG Connect 4G (MetroPCS one) and put Cynagenmod and CWM on it. Everything went fine until It got stuck loading the Cynagenmod logo during the boot. It stayed like that for about 2 hours and no cigar. So then I did the cold boot thingy ( Power button and - volume ) and now its stuck in CWM boot and I can't get out of it. I don't even want cynagenmod anymore, I just want my phone back to normal.
And you guys will hate me for this, but I DIDN'T make a backup...
Try flashing it again via ADB or try TWRP instead of CWM. I know there must be stock firmware and recovery for your device somewhere on XDA.:good:
---------- Post added at 03:30 PM ---------- Previous post was at 03:26 PM ----------
Sorry you didn't mean you had a problem with CWM but with Cyanogenmod. Have you wiped cache and Dalvik cache in recovery? That helps most of the time.
Micromax Canvas 2 A110 Fromat whole flash problem
Hello... this is my first time writing .. something in this forum... plz forgive me if i do any mistake.....
I have been reading all of your post ... and all .. and i like the support which u all are giving... thx for that...
And about the problem which i am having.... i have MIcromax Canvas 2 and accidently i did format ... then auto format flag, then format whole flash... and i am feeling very sorry for what i did... i was abt to flash (S9081_MP_F4.1_B1_IN_MMX_1.10) now i can,t switch on my phone.. cn't c the red light while put on charge.. cn't go to recovery mod (CWM)...:crying: plz XDA members help me... i dnt want to go to service center ... in-spite of that i want ur help and support..... plz give me diractions to overcome this foolish mistake which i made...u may mail me on my gmail ... THx to u all in advance ....
Hi
Yesterday I wiped out my xolo q800's android
Now it is bricked in boot loop i.e. XOLO logo appears and then hangs it has TWRP installed
When I restore the android system, boot, and data fro TWRP it asks to reboot.
After reboot it again falls into boot loop.
I am new to this so PLEASE help me to UNBRICK my xolo.
PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
digambar908 said:
Hi
Yesterday I wiped out my xolo q800's android
Now it is bricked in boot loop i.e. XOLO logo appears and then hangs it has TWRP installed
When I restore the android system, boot, and data fro TWRP it asks to reboot.
After reboot it again falls into boot loop.
I am new to this so PLEASE help me to UNBRICK my xolo.
PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Visit here
http://androidjugaad.com/Thread-Tut...r-Xolo-Q800-for-Unbrick-LINKS-UPDATED-WORKING
[Resolved]How to unbrick xolo q800
[/QUOTE]
Thanks for the advice I had done it and my problem is resolved.
Play store just keep on downloadong but not downloading
HI FRENDZ MY GOOGLE PLAY STORE IS NOT ABLE TO DOWNLOAD ANY THING
WHEN I CLICK ON DOWNLOAD IT JUST KEEP ON LOADING BUT DOWNLOAD DOES NOT START
ITS TERRIBLE I HAVE FACTORY RESET BUT PROBLEM NOT SOLVED NO CONNECTION PROBLEM AS YOUTUBE etc ARE WORKING
PLSSS HELPPPP!
Hi All,
My XOLO B700 is soft bricked. Can you throw some light on repairing it. I've no idea.
I think someone in other thread uploaded img file for same model. How can I make use of it to unbrick my phone.
Many thanks in advance.
---------- Post added at 01:11 PM ---------- Previous post was at 01:09 PM ----------
sachinsud said:
Visit here
http://androidjugaad.com/Thread-Tut...r-Xolo-Q800-for-Unbrick-LINKS-UPDATED-WORKING
Click to expand...
Click to collapse
Link is not working. Can you suggest me how can I unbrick my soft bricked XOLO B700 phone.
veerusayz said:
Hi All,
My XOLO B700 is soft bricked. Can you throw some light on repairing it. I've no idea.
I think someone in other thread uploaded img file for same model. How can I make use of it to unbrick my phone.
Many thanks in advance.
---------- Post added at 01:11 PM ---------- Previous post was at 01:09 PM ----------
Link is not working. Can you suggest me how can I unbrick my soft bricked XOLO B700 phone.
Click to expand...
Click to collapse
http://www.androidjugaad.com/index.php/topic,1632.0.html
Store Problem
Er.28515 said:
HI FRENDZ MY GOOGLE PLAY STORE IS NOT ABLE TO DOWNLOAD ANY THING
WHEN I CLICK ON DOWNLOAD IT JUST KEEP ON LOADING BUT DOWNLOAD DOES NOT START
ITS TERRIBLE I HAVE FACTORY RESET BUT PROBLEM NOT SOLVED NO CONNECTION PROBLEM AS YOUTUBE etc ARE WORKING
PLSSS HELPPPP!
Click to expand...
Click to collapse
Well i think I know the problem Sometimes the net is really slow it also happened to me me before but i solved the problem by putting WPA2 password to keep out unwanted people who's trying to connect to your network if it does'nt work well try going to this websiteht()tp://forums.android()central().com/samsung-galaxy-tab-()10-inch/202012-()play-store-not-updating-downloading-apps.()html)
It might help ya (remove the parenthesis)
sachinsud said:
http://www.androidjugaad.com/index.php/topic,1632.0.html
Click to expand...
Click to collapse
Thanks, will it work for XOLO B700?
On my micromax a35 Bolt(rooted) apps are crashing frequently. The crash error does not come up but the app restarts suddenly while opening someting, like the Gallery app- after opening certain pictures it will restart and went back to starting page...
Someone told me to clear my Rom Cache but I dont know how since the stock recovery does not have the function..And custom recovery is not available for my device.. Please help me!!:crying:
This phone has a very low ram available so many app crash and slow down the phone..
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
Hey recovery is available for your phone...
follow this.. http://forum.xda-developers.com/showthread.php?t=2191328
press thanks if i helped..
problems with cwm
hey brother
i have rooted the phone and successfully flashed cwm...but :
1. the cwm cant boot manually...i have to boot it from rom manager
2. i cant take nandroid backup....it bricks d damn device every time i try..
3. i have even tried reflashing it...same results...help me dude...
Hi everyone, this is a guide that help you to unbrick Micromax Canvas 2 Plus A110Q.
Follow all the steps carefully
1. Download the stock rom v1 from here . Do not download stock rom v2 from anywhere, that rom contain many bugs.
2. Download sp flash tools form here. (tool needed for flashing rom on the device)
3. Download USB drivers from here
Now you need to install the usb preloader drivers you just downlaoded.
To install the drivers:-
1.Extract the USB drivers.rar file.
2.Switch off your phone
3.Open device manager(search for "Device Manager") or click on computer properties , then device manager..
4.Connect your phone in OFF state
5.There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files from usb drivers you extracted.
NOTE: THIS METHOD WILL NOT WORK ON WINDOWS 8
Now, if you are using windows 8 do this to install the drivers:
1. Dwonlaod the usb driver.rar file.
2. Hover pointer to Top Right corner of your screen, choose Settings from sidebar
3.Click last option "Change PC Settings"
4.Select "General"
5.Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
6.Once screen is back, select option "Troubleshoot"
7.Select "Advanced Options"
8.Select "Startup Settings"
9.Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
10. Choose the win 7 file from usb drivers.rar file to install drivers on windows 8 .
Now,
4. Extract ROM and Flash Tool
5. Open Flash_tool.exe from SP_FLASH Tools.
6.Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from ROM folder
7.Select "Download" option, it will search for phone now.(if does not detect your phone pull the battery out and put it in again.)
8.Switch OFF the phone.
9.Connect it with USB (in OFF state only) (proper divers must be installed as said above)
10.If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means ROM is flashed.(don't panic if there is no green circle just let it work for 10 minutes and unplug your phone from computer.)
11.Remove phone, Switch it ON.
Thanks
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
I tried this and it worked. Successfully unbricked my phone.
Sent from my IQ446 Magic using Tapatalk
supersapien said:
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
Click to expand...
Click to collapse
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
Click to expand...
Click to collapse
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
Click to expand...
Click to collapse
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
ok thanks...
rahulbasu2013 said:
ok thanks...
Click to expand...
Click to collapse
There is a thanks button
Plz help
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Plz
Samuel117 said:
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Click to expand...
Click to collapse
Not any reply plz reply guys i need help
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
Samuel117 said:
Not any reply plz reply guys i need help
Click to expand...
Click to collapse
How did you get into that problem?????
and can you describe in detail?
Using fastboot
rahulbasu2013 said:
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
How did you get into that problem?????
and can you describe in detail?
Click to expand...
Click to collapse
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Samuel117 said:
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Click to expand...
Click to collapse
did you try the unbricking guide??? did that help??
No
rahulbasu2013 said:
did you try the unbricking guide??? did that help??
Click to expand...
Click to collapse
cant able to use those step out of town now not have pc here
It didn't Work.
I did everything correctly, the green circle appeared, still stuck on bootloop. HELP PLZ.
bluetooth not working
hey guyz i have installed custom rom lewa os5 in my canvas a110q, every things works fine but bluetooth is not working. is it rom problem or something else. is there any solution for this? kindly reply me [email protected] thnx.
anyone helpme frnds
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
sai teja badri said:
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
Click to expand...
Click to collapse
Flash v1 and then flash any rom or uboot.bin of v1 via sp tools
Sent from my C2305 using Tapatalk
guyz it cnat detect my phone on device manager....
in other devices in device manager...it shows micromax a110q and the phone just boots ....
plz help
What happened is that, i haven't rooted my phone yet and out of no where it goes into bootloop.
I followed all the steps from installing the drivers - till getting the green circle, but no success
Can you please help me?
Will it help ?
I have the same problem on Phone stuck on boot up....
I Never did any rooting/other software updates to my mobile.
The Problem started when a message like "some XYZ process has stopped"
I clicked OK but the message came 1 after the other many times so I though of rebooting mobile.... I gave reboot option and the problem raised and the phone never did start up. I tried factory reset but still the same........A friend suggested me this But i still want to confirm is it harmless to use this and is this the proper technique for my problem ?
Please Help Me....