Hello, developers...
I have a karbonn a25 model mobile... I rooted it, and what the mistake i did was that i moved app folder from rom to sd card and the mobile stop responding, now i cannot boot it...everytime i try to boot,it stucks on karbonn logo...and just there..... What do i have to do?
try ubuntu until u get success
zryuk said:
Hello, developers...
I have a karbonn a25 model mobile... I rooted it, and what the mistake i did was that i moved app folder from rom to sd card and the mobile stop responding, now i cannot boot it...everytime i try to boot,it stucks on karbonn logo...and just there..... What do i have to do?
Click to expand...
Click to collapse
well u really had done a big mistake,
u always should touch root files/folders with care..
i hope u r talking about karbonn a25 5inch mobile, which is dual core
as cwm does not support in our mobile, and i cant give u stock rom
u can give a try to ubuntu... it will alive ur phone
Plz help me out,.....
In Karbonn A25 i replaced the sound audio/ui files,first it worked,but with very low sound,so i gained the volume to 400% and as i played it,was loud as expected,then replaced it again in the system ui,but it was not satisfactory,so i made it more loud and replaced,but then one by one there were no sounds,i am able to play and hear them but there is no playback from system ui,....and i tried every tweak,.....like rechecking in audio profile,and restoring audio ui backup,..restarting,...but no use,........ :silly:
need it,...
@thewayur
Can u show me how to install ubuntu on our Karbonn A25,....i am also stuck on boot logo ,.........plz help me out,... :crying:
the thing i did wrong after root is i replaced boot logo and fonts,..is there any way to replace them,..android commander get's access to system partition on mtd block 12,... but need root permission,..which is not possible,........
Naineesh said:
In Karbonn A25 i replaced the sound audio/ui files,first it worked,but with very low sound,so i gained the volume to 400% and as i played it,was loud as expected,then replaced it again in the system ui,but it was not satisfactory,so i made it more loud and replaced,but then one by one there were no sounds,i am able to play and hear them but there is no playback from system ui,....and i tried every tweak,.....like rechecking in audio profile,and restoring audio ui backup,..restarting,...but no use,........ :silly:
Click to expand...
Click to collapse
hey how u gained the sound to 400%?
---------- Post added at 05:18 PM ---------- Previous post was at 05:15 PM ----------
Naineesh said:
@thewayur
Can u show me how to install ubuntu on our Karbonn A25,....i am also stuck on boot logo ,.........plz help me out,... :crying:
the thing i did wrong after root is i replaced boot logo and fonts,..is there any way to replace them,..android commander get's access to system partition on mtd block 12,... but need root permission,..which is not possible,........
Click to expand...
Click to collapse
youtube..there r many
Rly
thewayur said:
hey how u gained the sound to 400%?
---------- Post added at 05:18 PM ---------- Previous post was at 05:15 PM ----------
youtube..there r many
Click to expand...
Click to collapse
Can u give me any link or any specific forum,...which can guide me,.........
Karbonn A25 - Stock Rom or Ported Custom recovery
pls!!!!!!!!!!!! Anyone provide stock rom or any ported custom recovery for karbonn a25!!!!!!!!!!
Help if u can,..now this a challenge for developers,.....
Help us plz,.....i just need root permissions to repair my phone,........adb can be accessed by factory mode,...but's its protected adb which does not give root permission,..if it would have gave me the permission till now phone must have been in a working condition,....just need insecure adb on my phone,.......so i can replace system files and repair my android os,........ :crying: :crying:
Shocking news,....
I have a Karbonn A25 stuck in bootloop,.....i was fed up seeing its bootloop,..so yesterday night i thought,..i will keep the phone loading on bootloop,...i kept the phone on charging on ongoing process bootloop,..it continued,..so at midnight i disconnected supply,....and left the phone on battery loading on booting,..si next morning as i woke up i saw,..the phone switched off as battery was drained i guessed,..so putted it on charging and started the phone,...i saw the normal booting,...but,..it was not loading,..but its was not bootlooping also,..so i removed the battery,..and,..restarted,..in recovery mode,..i thought i will wipe,.data,.i did,...it,..and restarted again in recovery mode,..and did wipe cache partition,..i did it and rebooted,..phone,....and i kept aside,..because,...i had no hopes on it,....but,....after 2 mins,..it booted on fresh os,..showing click here for app menu etc etc,...so it confirmed me that,..it was problem of bootanimation.zip,..i thought to replace,..it,..but bad,..luck,..as i took phone in my hand,..the charger cable disconnected,..and the cable was not of A25,..it was of some other phone,..so it was too much loose,...and phone showed battery warning and the phone shutted down,.. :crying:
and as usual it didn't booted again normally,...as it showed again,...stuck in bootloop,..so anyone have any idea what was it,..
and how can change the bootanimarion without booting up,..just can open in factory mode,...with adb with no root permission,.. :silly:
You need to get it in download mode or fastboot mode. Then u need to install the stock firmware
. Im facing the same problem. I cannot repair it since I dont know how to get it in download mode. Please find out and help me too.
Xavier_99 said:
pls!!!!!!!!!!!! Anyone provide stock rom or any ported custom recovery for karbonn a25!!!!!!!!!!
Click to expand...
Click to collapse
https://www.adrive.com/public/muWAQC/A25_V1..n.rar
HERE is the LINK FOR KARBONN A25 stock rom.
Hi everyone, this is a guide that help you to unbrick Micromax Canvas 2 Plus A110Q.
Follow all the steps carefully
1. Download the stock rom v1 from here . Do not download stock rom v2 from anywhere, that rom contain many bugs.
2. Download sp flash tools form here. (tool needed for flashing rom on the device)
3. Download USB drivers from here
Now you need to install the usb preloader drivers you just downlaoded.
To install the drivers:-
1.Extract the USB drivers.rar file.
2.Switch off your phone
3.Open device manager(search for "Device Manager") or click on computer properties , then device manager..
4.Connect your phone in OFF state
5.There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files from usb drivers you extracted.
NOTE: THIS METHOD WILL NOT WORK ON WINDOWS 8
Now, if you are using windows 8 do this to install the drivers:
1. Dwonlaod the usb driver.rar file.
2. Hover pointer to Top Right corner of your screen, choose Settings from sidebar
3.Click last option "Change PC Settings"
4.Select "General"
5.Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
6.Once screen is back, select option "Troubleshoot"
7.Select "Advanced Options"
8.Select "Startup Settings"
9.Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
10. Choose the win 7 file from usb drivers.rar file to install drivers on windows 8 .
Now,
4. Extract ROM and Flash Tool
5. Open Flash_tool.exe from SP_FLASH Tools.
6.Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from ROM folder
7.Select "Download" option, it will search for phone now.(if does not detect your phone pull the battery out and put it in again.)
8.Switch OFF the phone.
9.Connect it with USB (in OFF state only) (proper divers must be installed as said above)
10.If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means ROM is flashed.(don't panic if there is no green circle just let it work for 10 minutes and unplug your phone from computer.)
11.Remove phone, Switch it ON.
Thanks
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
I tried this and it worked. Successfully unbricked my phone.
Sent from my IQ446 Magic using Tapatalk
supersapien said:
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
Click to expand...
Click to collapse
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
Click to expand...
Click to collapse
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
Click to expand...
Click to collapse
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
ok thanks...
rahulbasu2013 said:
ok thanks...
Click to expand...
Click to collapse
There is a thanks button
Plz help
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Plz
Samuel117 said:
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Click to expand...
Click to collapse
Not any reply plz reply guys i need help
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
Samuel117 said:
Not any reply plz reply guys i need help
Click to expand...
Click to collapse
How did you get into that problem?????
and can you describe in detail?
Using fastboot
rahulbasu2013 said:
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
How did you get into that problem?????
and can you describe in detail?
Click to expand...
Click to collapse
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Samuel117 said:
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Click to expand...
Click to collapse
did you try the unbricking guide??? did that help??
No
rahulbasu2013 said:
did you try the unbricking guide??? did that help??
Click to expand...
Click to collapse
cant able to use those step out of town now not have pc here
It didn't Work.
I did everything correctly, the green circle appeared, still stuck on bootloop. HELP PLZ.
bluetooth not working
hey guyz i have installed custom rom lewa os5 in my canvas a110q, every things works fine but bluetooth is not working. is it rom problem or something else. is there any solution for this? kindly reply me [email protected] thnx.
anyone helpme frnds
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
sai teja badri said:
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
Click to expand...
Click to collapse
Flash v1 and then flash any rom or uboot.bin of v1 via sp tools
Sent from my C2305 using Tapatalk
guyz it cnat detect my phone on device manager....
in other devices in device manager...it shows micromax a110q and the phone just boots ....
plz help
What happened is that, i haven't rooted my phone yet and out of no where it goes into bootloop.
I followed all the steps from installing the drivers - till getting the green circle, but no success
Can you please help me?
Will it help ?
I have the same problem on Phone stuck on boot up....
I Never did any rooting/other software updates to my mobile.
The Problem started when a message like "some XYZ process has stopped"
I clicked OK but the message came 1 after the other many times so I though of rebooting mobile.... I gave reboot option and the problem raised and the phone never did start up. I tried factory reset but still the same........A friend suggested me this But i still want to confirm is it harmless to use this and is this the proper technique for my problem ?
Please Help Me....
I think i flashed the wrong ROM by mistake in canvas knight2 by twrp and after completing the installation there was option to reboot the phone and after tapping on it the phone becomes dead completely, nothings happening while pressing the power button , not going in recovery mode and don't showing the charging logo when I put it on charge , plz somebody help me :crying:
nishkarsh3696 said:
I think i flashed the wrong ROM by mistake in canvas knight2 by twrp and after completing the installation there was option to reboot the phone and after tapping on it the phone becomes dead completely, nothings happening while pressing the power button , not going in recovery mode and don't showing the charging logo when I put it on charge , plz somebody help me :crying:
Click to expand...
Click to collapse
I think you hard bricked your android. First connect your android to PC via USB and check it detects Qualcomm 9008 port in device manager. If yes then use qfil tool to flash your stock os to your android.
my phone micromax canvas night 2 hardbrick. dont show the boot logo.only show the penkin photo phone switch on mode...flashing proceess is compleate but dont boot the device only vibrate and show the penkin photo...what is this problem my phone please help...only fast boot flashing available in net any other flashing process in this phone ...so please help..