Database Info

[hot]micromax a110 flashing tutorial working

i m not responcible for any damages
do at your own risk
read all twice before flashing
til date i have flashed more then 10 times by this method
Make sure that you read everything carefully and know what you are doing.
Don't blame me for any damage that may occur on your phone.
-----------------------------------------------------------------------------------------
-do not disconnect mobile while flashing bettery must be more then 50%
-pc/laptop must not stop while flashing
-close other progames running in your pc/laptop for better speed-discoonect net
-images given here for learning purpose for better understanding of all steps
-you can practice till step 3 before all steps
-there is tutorial inside downloaded file by micromax do not use it(stictly -they given image for firmware upgread and you have to click download button)
---------------------------------------------------------------------------
What's needed:
1)USB data cable
its there with your chrgere right!!!
2)MediaTek USB VCOM drivers
-go to settings-developer option - click on usb debuging mode ok
-now connect your mobile with your pc/laptop and driver containg drive created open it and install your desire 32 bit or 64 bit driver(run as admin)
---restart your pc with phone connected
---to check is your driver instal or not go to usb teether option and apply it. if internet surfing is possible then you are ready to go---(must check)
3)SP Flash Tool and flashing files
-- is provided with in download file
-- 2 rar files
----make new folder and extract both files in new folder
--so threre is two folder one for sp flash tool and one containing all flashing files (warning =do not rename this folder)
--------------------------------------------------------------------------------------------------------------------
1)open spflsh tool
First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(here it is named MT6577_Android_scatter_emmc.txtfind in download file)
all files will be loded
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)choose Option-USB Model,click USB Model,
Choose Option- DownLoad All-Speed-High speed click High Speed
3)now connect your fone with micro usb data cable (do not connect to pc now just only fone side connect)
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
now fone is turn off with data cable coonect with fone side only
4) now do some speedy work
press download and connect immediatly to pc (same usb port when you use while instaling the driver)
The process will start and a red progress bar will appear.
After the red progress bar is complete(for 1 sec)
there will appear a purple progress bar(for1 sec
.
and thene yellow bar(for1 min to 5 min)
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
5)You can now safely disconnect your phone and turn it on. The process ends here
remove your mobile and start it will take 2 min to first boot
enjoy!!!!!!!!
-----------------------------------------------
download links
---------------------------------
what's new in updated stock v2:
Auto rotation sensor bit improved
- internal memory now increased to 1.58 ,rest is internal card 1.12 gb
- now u can install apps in external memory card default.
battery improve.
true colour.
GPS fix.
better performance.
now install pass on memory card.
and lots more finding.
updated smooth scrolling.
--------------------------------
in downloaded file you will get sp flash tool and flashing files
make new folder and extract all 2 rar files in new folder
----------------------------------
stock rom version 2 links resume
stock rom version 2 mirror links resume
--------------------------------

reserved

i have flashed many times and found no need to remove battery just make sure all drivers are installed in pc even in mobile off mode also. then when u click upgrade firmware simply switch off ur mobile u feel the vibration after 5 sec of switch then simply connect it to usb cable thats all.

Error on Sp tool
I am getting this error I dont know what to do please help.
Please refer to the screen shot

deadmantfa said:
I am getting this error I dont know what to do please help.
Please refer to the screen shot
Click to expand...
Click to collapse
drivers not installed properly. install them again.

deadmantfa said:
I am getting this error I dont know what to do please help.
Please refer to the screen shot
Click to expand...
Click to collapse
Your vcom drivers not installed properly.....
Sent from my Micromax A110 using xda premium

mmx a110
Dibbyo123 said:
Your vcom drivers not installed properly.....
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
dead on sp tool error 4010 after red line no preloader driver plzz help me

Let's take everything over to this thread: http://forum.xda-developers.com/showthread.php?t=2167244

[Guide] Unbrick your Qmobile A2 v3 :D :D

plz give the original link to this thread also
this is written in hurry :/ so sorry
Salam Everyone
Is your Qmobile Noir A2 bricked??? :/
If your mobile is stuck on Logo!? not showing Recovery?! then you can do these steps to Unbrick your mobile
First of all i want to say that i take no responsibility to Loss or Damage to your Device or You
Firstly you must have a Full backup of your Device (that backup which is made by mtkdroidtools contains these files shown in pic here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
)
If you have all of the above mentioned files then you can proceed
Things you need:
• SP Flash Tools to flash all backup files
• Qmobile A2 Drivers --> (MT65x3 USB VCOM drivers + ADB_usb_driver + pdaNet) https://www.dropbox.com/sh/5zdw0fe0c5o98u0/JRyKXydQn3
• Data cable
• CWM Recovery 6 View attachment Recovery(CWM6).img
• Needle
• and some knowledge
Procedure:
Okay so now install all drivers that are mentioned above!
after that connect your device and make your system recongnise your device obviously it fails as your device is bricked :/ but do this then
now open up sp flash tool and load scatter file that is present in backup folder in mtkdroidtools
when you select scatterfile it automatically check marks on some boxes including preloader, boot, logo etc
dont uncheck any of them and then check the recovery box and click on recovery
then select cwm6 (remember to rename cwm6 to recovery.img)
then click on Android and select system.img
see below image to see how to get system.img file
now click on download
immediatly connect you qmobile a2
then wait to install drivers
after drivers are installed (might give you installation failed if failed then proceed too)
after that press and hold needle in test point see image below
now sp flash tool start flashing your device keep and hold the needle pressed in test point
after two or three times loading sp flash tool will give an error click ok then
remove needle and remove usb
now turn on your mobile it will be unbricked
your phone has cwm recovery 6 installed with stock rom
Click thanks if it really did helped you
May work on qmobile a2 v2 but do at your own risk
Allahhafiz

hey can you please provide me the files i have bricked my a2 v3 and dont have these files

Sure!
abbas93 said:
hey can you please provide me the files i have bricked my a2 v3 and dont have these files
Click to expand...
Click to collapse
Yes Try this Link for A2v3 downloads
https://copy.com/dA0rY

Thank You Very Much
Very Very Thank you I Bricked My Phone And now With Your Help I Unbrick It :good:

Sounds GooD
waqas1412 said:
Very Very Thank you I Bricked My Phone And now With Your Help I Unbrick It :good:
Click to expand...
Click to collapse
Well My Pleasure! ♥

NC4777 said:
Well My Pleasure! ♥
Click to expand...
Click to collapse
Dear sir,
where to find these files and where should i put those files?
kindly guide me properly..
I just downloaded your stock backup from your given link..
now what should i do?
guide me sir
I have Qmobile A2 v3
or send me sms on my number
0311-2221432
Need your help sir.
thnx in advance​

QMobile Noir A2 Bricked
Assalam o'alaikum
I have been unable to boot my set after trying to root it by the test point method. Its version 3.
I have tried the above method too but it does not work on it. The reason may be that my mobile does not boot at all.
No logo screen rather it does not start even when I plug it in the charger it does not charge.
What could be wrong? When I tried your method it stucks at 4% when flashing by the flash tool.
It gives the error that the page file is not aligned. Please help me out as I am very worried.
If possible please give your cell no.
My cell number is 03218546135
Waiting for your reply,.......

filmstarali said:
Dear sir,
where to find these files and where should i put those files?
kindly guide me properly..
I just downloaded your stock backup from your given link..
now what should i do?
guide me sir
I have Qmobile A2 v3
or send me sms on my number
0311-2221432
Need your help sir.
thnx in advance​
Click to expand...
Click to collapse
Okay i will contact you.
Sent from Mobile

Ohh you'v already contact with me. Making more than 1 account is not allowed. Double post
Sent from Mobile

need help q mobile noir a2 v3 i installed turbo rom after flashing imei and every thing ok but mobile network not available how to fix it. i think turbo rom changed my mobile baseband pls tell me how to fix it

Qmobile a900 is bricked..
What to do now .. the device was bricked while I was trying to install CWMR to it.. Now need immediate help what to do and how to do..??

A20 Bricked Please Help Me
Hi guys anyone have full backup of a20 which is made by mtkdroidtools .

link u provided not working..!!
my phone Noir A2 v3 working all good but i am getting invalid iemi and when i try MTKdroidTools it giving me this error ... please help i am rotted cwm installed..!!

[GUIDE]Restoring your lost IMEI in MTK phone

A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won't be finding your mobile IMEI numbers displayed.
Don't worry you can restore your IMEI's. Just follow my guide and you will be able to restore your IMEI. We will split the tutorial into two parts.
BACKING IMEI :
First step before performing all these things is that your phone should be rooted.
When your phone is in normal state with everything functioning install Root explorer and navigate to the below location >ROOT>DATA>NVRAM>MD>NVRAM>NVD_IMEI>MP0B_001
Now copy this MP0b_001 file to your SD card or PC whichever place you feel the file we be safer.
Now download MTK Droid tools . Now extract the zip file and open the MTK droid tools exe file.
Now in your phone turn on USB Debugging by going to Settings->About phone-> Developer options and there turn on USB debugging. Now connect your phone and MTK droid tools should be able to detect your phone. U should see a window like this appearing after your phone has been detected.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now press the ROOT button present in lower right corner. When it asks Supersu grant in your mobile click allow. After MTK droid gets access u should see a green colour box appearing in the lower left corner which means u have correctly granted access to MTK droid.
Now click on the IMEI/Nvram tab. A window should open and click backup NVRAM and MTK droid tools would take a backup of NVram in its folder.
RESTORING IMEI :
Now when you lose IMEI first try this method. Now take the MPDB_001 file which you took backup at the first step and navigate through Root explorer to this location ->ROOT->DATA->NVRAM->MD->NVRAM->NVD_IMEI. Now paste that file and replace the one present there. Now set the permissions for that file as RWER-ER-E. Now reboot your phone and you should be able to get your IMEI back.
If you still haven't got IMEI open MTK droid tools and connect your phone and press ROOT again and give MTK droid tools root access. Now click on IMEI/Nvram tab and select Restore option and restore the NVram backup which you took earlier. Now reboot your phone and you should be able to get your IMEI.
Extreme method :
After performing all the above if you haven't still got IMEI. Now switch off your phone and open SP Tools and connect your phone. Now click on format and format your whole phone. ( This wipes whole of the phone including NVram region ).
Now flash stock ROM through SP Tools and after it completes start up your phone. ( Don't be surprised. Your IMEI will still be in lost state only ). Now root your phone.
After successful rooting now connect your phone to MTK Droid tools and again press ROOT button and grant root access to MTK Droid tools. Now click on IMEI/NVram tab.
Now as you see in the image above you can see two boxes IMEI1 and IMEI 2. Now enter your device IMEI numbers manually in those two boxes.( You can get your IMEI no's from your phone box ). Now click replace IMEI. Now reboot your phone and you should be definitely able to get your IMEI restored.
Should you have any queries feel free to contact me and I will be there to help.

Will this work for SIM ME lock? Which popups every time I reboot my phone? It's annoying, it happened after I flashed CM11 ROM. Can you make it go forever?
@Santhosh M

Geek-DROID said:
Will this work for SIM ME lock? Which popups every time I reboot my phone? It's annoying, it happened after I flashed CM11 ROM. Can you make it go forever?
@Santhosh M
Click to expand...
Click to collapse
Yes you can. There is a hint in the OP. Realize it and get it done

Santhosh M said:
Yes you can. There is a hint in the OP. Realize it and get it done
Click to expand...
Click to collapse
Format except the bootloader, right?

Friends, I flashing my MP 809T with MTK 6592, because I needed to change my screen's driver, and now I have problems with IMEI. I didn't do any backup before I flashing. This method will fix my IMEI problem?

I even tried the extreme method!!
But I still cannot get my IMEI numbers,, they are still null
And I have my IMEI numbers with me too!!
Sent from my A250 using XDA Free mobile app

RaShmitha said:
I even tried the extreme method!!
But I still cannot get my IMEI numbers,, they are still null
And I have my IMEI numbers with me too!!
Sent from my A250 using XDA Free mobile app
Click to expand...
Click to collapse
This is another permanent guide. Maybe this can help you.
http://www.androiddevs.net/permanent-imei-restore-tool-mediatek-phones/

Bro tried your method .. But this way nvram image is getting erased after a flash or rom change or reset ... I lost my friends imei on canvas 2 colours how can i permanently write ..
Thnx in advance

anuragdc said:
Bro tried your method .. But this way nvram image is getting erased after a flash or rom change or reset ... I lost my friends imei on canvas 2 colours how can i permanently write ..
Thnx in advance
Click to expand...
Click to collapse
http://www.androiddevs.net/permanent-imei-restore-tool-mediatek-phones/
This guide should be helpful. Its a permanent solution

Superb
I tried
On mmx a120
Superb xda
Ur the simply awesome
I am successfully
Installed imei on my phone
No words to say my happiness .

Does permanent method will work on MMX a190 plsss rply me

Imei not work after restore SPflash and TWRP in a (mtk6735M)
Dude, I have a problem:
I've do a backup of nvram with twrp, I try restoring with twrp and sp flashtool (it flash correctly, then I tried wipe davlk cache and cache) but this not work
when I turn on the phone and open the information it shows "No imei" ... the mtkdroid tools no support mtk67xxx... can you help me?
my chip is mt6735M, android lollipop 5.1.

I get an error saying "Loss of communication with the device. Program will be closed."

i have wiped efs and now my phone stuck on restart. will this help?
i just want it to boot successfully, after that i will repair my imei and network with box.
i have galaxy M10s

Santhosh M said:
http://www.androiddevs.net/permanent-imei-restore-tool-mediatek-phones/
This guide should be helpful. Its a permanent solution
Click to expand...
Click to collapse
Can you update link? It's not working

[GUIDE] Fixing hard bricks [Qualcomm HS-USB QDLoader 9008]

Fixing dead L70+ devices​
EVERYTHING IN THIS GUIDE IS DANGEROUS AND CAN COMPLETELY DESTROY YOUR DEVICE IF DONE INCORRECTLY. YOU HAVE BEEN WARNED
PLEASE READ EVERYTHING​
DO NOT DO THIS IF IT'S ONLY A SOFT BRICK!!!
By following this guide you agree that I TAKE NO RESPONSIBILITY FOR BRICKED OR DAMAGED DEVICES.
You and only you decided to follow these instructions.
Click to expand...
Click to collapse
What is a dead (hard bricked) device?
A dead or "hard" bricked device is a device that has been bricked beyond repair. Usually a corrupted boot partition failing to load the kernel or any type of recovery menu in order to restore. Motherboard swap is most commonly done in order to fix such device. Some devices such as our own have "leaked" service packages that can be used to restore a hard bricked device. Beware that this is not a 100% guarantee. It might or might not work.
Click to expand...
Click to collapse
How do I know if my device is hard bricked?
It would fail to boot and enter recovery/download mode. When connected to a PC and powered on Windows will detect it as Qualcomm HS-USB QDLoader 9008.
Instructions​
Download and install drivers from here
Download BoardDiag v2.99a from here
Download TOT files from here
Unpack all archives in a new folder in the root of your C: drive. Everything including the tot file.
Remove the batter from the device
Plug the device in to the PC via the USB cable.
Place battery back
Open BoardDiag and set it up as such:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AP Chipset: W3 W5 (ms8610)
Com Port: Get port num from device manager.
Target Dir: The new folder you created in the root of C:
BIN: Select .tot file
DIR: The new folder you created in the root of C:
Click to expand...
Click to collapse
Click on the EXTRACT button and wait until it finishes.
Make sure there are ticks on AP Check and EMMC Test !
Press START and wait until the program finishes.
When done it's safe to disconnect the phone from the PC.
Pull the battery out and place it back in and try to enter Download mode. If successful you should be able to flash KDZ following this guide.
Translated and re-formatted. Original guide by @kossrap @ 4pda.
Happy flashing!

Reserved

Reserved 2

Great to have new tools with Qualcomm chipsets

The BoardDiag have no "msm8916"

hi, I tried this guide, but I could not get my lg d290n, ap test ok, EMMC ..test failed test, dsram okay, where am I wrong? someone can help me because I'm not very good?

marcello1977 said:
hi, I tried this guide, but I could not get my lg d290n, ap test ok, EMMC ..test failed test, dsram okay, where am I wrong? someone can help me because I'm not very good?
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/d290n/how-to/guide-reflashing-stock-rom-d290-d295-t3142456

I have this problem 3 months ago , but i dont found solution yet for my Samsung -SM-N910F , sorry for my bad english :/

Need help please. I can't find the COM Port of my device. It just says "QHSUSB_BULK" under other devices. Doesn't say the port number. Anyone can help?

How to flash for htc one m8 in hsush qdload 9998
Sent from my HP 7 VoiceTab using XDA Free mobile app

Please Help
This happened after I clicked the start button...
please help

im trying to fix two LG fino with this one.
both were successful but I am still unable to boot to download mode

s4h1k0 said:
im trying to fix two LG fino with this one.
both were successful but I am still unable to boot to download mode
Click to expand...
Click to collapse
If you can boot in system, you can enable developer settings, connect the phone to your pc and try "adb reboot edl"

sorry it seems that I missed some steps.
I still cant go to downlaod mode

s4h1k0 said:
sorry it seems that I missed some steps.
I still cant go to downlaod mode
Click to expand...
Click to collapse
I think you need to restore the files using restore boot img, check this guide http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359

Hi My phones Lg G Pad 10.1 LG-VK700 hard brick after me flashing rom wrong Can u help me How to fix it ? Thank for help
lamyean122gmail.com

dibowz said:
This happened after I clicked the start button...
please help
Click to expand...
Click to collapse
I'm having the same problem as yours, does anyone have a solution? thanks, need help

Is this compatible with lg l fino d290n? And if yes, why the TOT file to download has the name "LGD295V10eCIS.7z"?
Sorry for my English

Hello, this method and post files can be used for a LG L70 MS323 v10c Metro PCS, sorry for my English...

Can i use provided D295N .tot file on a D290G?

Firmware For Sony Xperia R1 PLUS g2299

Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You

sbhawani051 said:
Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You
Click to expand...
Click to collapse
You found anything? why there is no ftf file for it bro?

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
No nothing, I can't find it anywhere. Sony never released firmware for this model. But, I'm still hoping to get something

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
Found a rom but without .mbn file attached the screenshot with all the files I got. Any idea how to use these files with out using UMT_Qcfire I cen't afford it.
Also I found website which may help " https://forum.gsmhosting.com/vbb/f9...us-g2299-hang-logo-done-2619023/#post14707534"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello, to all whoever watching the comment. I want to tell that I've completely revived my Sony Xperia R1 plus G299 model using the rom I found on the website. It's working perfectly. I used the UMT for flashing the firmware. If you guys want the Rom for G299 for flashing. Message me here or write a comment. I'll provide you with firmware.

can you please provide the firmware and steps. it would be a great help!

As_373 said:
can you please provide the firmware and steps. it would be a great help!
Click to expand...
Click to collapse
Sure, I'll provide you with firmware. But I have to give you warning before you do any steps of it
After Flashing the firmware my phone have lost it's IMEI number only its Wi-Fi and Bluetooth is working.
Also this method is just for Sony Xperia R1 Plus which is hardbricked means it doesn't turns , screen shows nothing when pressed button only shows red led blinking when charging cable is used.
Note: If you don't wanna to loose it's IMEI please don't use this method.
Requirements: - Ultimate Multi Tool software, Qualcomm USB Drivers & firmware.
Steps: -
1) Please install the UMT in your system/computer. You'll need to purchase it's usb as this software is not free or you can go nearest mobile repair shop as they do have this software generally or see if your friend have one.
2) Please install Qualcomm usb drivers.
3) If your phone is hardbricked this method works on it only. So open your phone back panel reach to it's motherboard.
4) Now after reaching find Sony G299 Edl points and short them but remove battery first. After shorting both edl points keep them shorted and insert the USB cable in phone and then in your computer. (You have to keep edl point shorted until you plugged the cable)
4) In your device manage you'll see the a usb COM port will be shows (It'll be like this Qualcomm HS-USB Qloader 9008 COM and some number).
5) It means your device is not connected in EDL mode if not try repeating the step above. If it worked make sure the device name shown in device is not showing any kind on error mark in device manager like this
if it does. That means your QC Usb drivers are not good. Seek help on youtube if this happens as this error is not gonnalet us flashing the firmware.
6) Open the UMT tool and choose the flasher option on top. Next make sure its on Single program mode. Below that you have to provide patch file and Xml file. You can do that by going into firmware folder which you've downloaded. It'll automatically detect the file format you just have to select it and then after all is done hit FLASH button.
It'll flash the software in sometime and your phone will reboot after that. But from my result it'll not have it's IMEI number anymore sony IMEI repair is not easy and you'll need to visit service centre maybe.
Here the firmware: - Firmware (https://www.mediafire.com/folder/6tpen9umgcou4/SONY_G2299_S000028_171102_2017-09-01)
Let know how it worked for you.

thank you so much!