Related
I would love some help, can someone tell me how to install a rom using Rom Manager. I've install clockwork recovery downloaded CM7.2 for my ascend. Can I install this, using Rom Manager? I have premium, but I have ruined 2 zio m6000 , 1 samsung moment, and 1 ascend. Up really dont want to loS another phone. Could I get a hand, here? I havE nO clue whaT half the things talked about on here are. But, its starting to cosT to much $ learning.
Sent from my M860 using XDA Premium App
As we are speaking about ROMs, any wrong operation can turn your phone in a simple book holder. I am not expert (bought my first HTC 3d ago), but already have good experience to help you A BIT.
- enter ClockWork (reboot your phone, press volume-down as it starts, navigate and enter RECOVERY mode: clock-work is installed in the recovery zone; some ROMs may have a reboot-to-recovery feature)
- navigate and wipe system, user-data, and cache zones
- navigate in menus a either perform a restaure, or apply-patch-from-zip depending on your type of ROM (IMG, zip ... )
You can also try to install your ROM without wipe, BUT, if you see CW does NOT says it will erase or format the partition first, then you are going to have troubles (small troubles: it will boot, but not work properly). You can start by this operation, and when you have found how to flash, then you wipe ... this will avoid having an empty system, and have your phone unusable for a time.
If you have a broken system, you can always put the SD card into computer and push a working rom using SD (then CW) or fastboot.
After successfull flash, you may want to wipe user and cache zones. Again, it just helps having a clean system, and is not mandatory; keeping old user-data usually works, but CAN make bugs trigger.
At your own risks. Good luck.
- how to flash my Samsung Galaxy S Fascinate CDMA. using Rom Manager. with file name .ota .? huhuh. sorry, i'm noob in this kind of thing.!! i;m begging you guys.!! help me , i'm stock to Eclair 2.1 and i hate it,! thanks.!!
-help me guys.!!! thanks.
kakroch99 said:
-help me guys.!!! thanks.
Click to expand...
Click to collapse
Learn to help yourself. You are not asking a new question.
1. Use the search function.
2. Use Google.
3. Research!
4. Read, read, read!
5. Don't actually try any modifications until you're confident you know what you're doing and willing to accept the consequences if you screw up.
6. If you fail, do more research and reading so you can...
7. Try to fix it yourself before asking for help.
8. Ask intelligent questions if you do still need help.
Sent from a HTC G2
THIS TO INFORM YOU THAT NONE OF THE STEPS ARE REQUIRED FOR 0.3.4. I AM JUST KEEPING THIS FOR INFORMATION AND THE WARNINGS AND OTHER POSSIBLE ISSUES YOU MIGHT FACE. AND AS A GENERAL DISCUSSION FOR BMM.
Hey everyone, whirleyes updated and released his amazing recovery.. It allows you to multiboot and has ton of more amazing tools..
Go here for original thread he posted in the razr forum.. http://forum.xda-developers.com/showthread.php?t=2005187
well, its tested and made only for razr, but theres a simple way to get it working on our Atrix 2.. here is how you can do it..
Before You Get Started, Here is an
IMPORTANT NOTE: DO NOT INSTALL BMM IF YOU USED A2 BOOTSTRAPPER BEFORE. THAT WILL MESS THINGS UP WITH YOUR LOGWRAPPER.BIN. THERE IS A GOOD CHANCE YOU WILL BOOT LOOP AFTER REBOOT. NOW IF FOR SOME REASON YOU DID NOT READ THIS, AND GET A MESSAGE ABOUT BMM ASKING YOU TO GET HELP, BEST THING FOR YOU TO DO IS RECHARGE YOUR BATTERY FULLY AND FXZ BACK. OR THERE IS A GOOD CHANCE YOU WILL HAVE TO USE MCGRUVYER METHOD OR ANOTHER A2 BATTERY. USER RAD7 RECENTLY HAD QUITE A LOT OF TROUBLE WITH HIS BATTERY DYING AFTER BMM MESSED WITH LOGWRAPPER. YOU HAVE BEEN INFORMED AND WARNED.
1) Download and install BMM from google play https://play.google.com/store/apps/details?id=com.projectlense.bootmenu.manager
2) Our phone does not have a partition for internal storage.. so we use the data partition for it.. To do so, just open a root browser like root explorer and navigate to /etc/bmm/conf
3) Open "recovery.fstab" with a text editor
4) The last line will be something like this
/int vfat /dev/block/mmcblk1p25
5) just change 'vfat' to 'auto' and 'mmcblk1p25' to 'userdata' (its the same though..)
so that it looks like this
/int auto /dev/block/userdata
and of course save it and close it..
6) Done.. you are good to go.. Happy Multi Booting..
Just some tips
On your first reboot, tap the android, go to settings-->System_2-->Partition setup and tap on ACTIVATE. This formats cdrom partition to ext2.
Now go back 2 two steps, and select any other system(3-6). choose Partition setup, tap on system.img, tap on Create, select the size, create it. go back and do the same with data.img and cache.img.
Once thats done, go back and select recovery, select switch system. choose your system that you created the images for, the colour will change, install any custom rom.. Enjoy!!
NOTE: BMM stores the images in internal memory(/int/clockworkmod/virtual/system_(num)). Since we dont have emmc partition and are using the data partition for /int, doing a factory reset will wipe it out and you will lose all your other roms.. So be carefull..
NOTE 2: USE ONLY SYSTEMS 3 TO 6 FOR CUSTOM ROMS.. SUSTEM 2 IS CDROM PARTITION.. YOU ACTIVATE IT ONCE AND DONE.. DONT TOUCH IT AGAIN.. ITS ONLY 12MB..
IMPORTANT NOTE: DO NOT INSTALL BMM IF YOU USED A2 BOOTSTRAPPER BEFORE. THAT WILL MESS THINGS UP WITH YOUR LOGWRAPPER.BIN. THERE IS A GOOD CHANCE YOU WILL BOOT LOOP AFTER REBOOT. NOW IF FOR SOME REASON YOU DID NOT READ THIS, AND GET A MESSAGE ABOUT BMM ASKING YOU TO GET HELP, BEST THING FOR YOU TO DO IS RECHARGE YOUR BATTERY FULLY AND FXZ BACK. OR THERE IS A GOOD CHANCE YOU WILL HAVE TO USE MCGRUVYER METHOD OR ANOTHER A2 BATTERY. USER RAD7 RECENTLY HAD QUITE A LOT OF TROUBLE WITH HIS BATTERY DYING AFTER BMM MESSED WITH LOGWRAPPER. YOU HAVE BEEN INFORMED.
We already know we can use bootmenu manager.
And, as i know, we don't have to do anything to run this app correctly.
brianmoyano said:
We already know we can use bootmenu manager.
And, as i know, we don't have to do anything to run this app correctly.
Click to expand...
Click to collapse
you are talking about the older version, i.e, 0.2.7. for that, you dont have to do anything.. this one is to run the latest version 0.3.2..
and using this, you can have not just two, but 4 systems + stock..
Ravikirancg said:
you are talking about the older version, i.e, 0.2.7. for that, you dont have to do anything.. this one is to run the latest version 0.3.2..
and using this, you can have not just two, but 4 systems + stock..
Click to expand...
Click to collapse
Oh, ok. Sorry then. I didn't know that.
Re: [TUT]Get whirleyes BMM 0.3.2 working on our a2
Thanks for this! I can say that version 0.3.2 is an amazing improvement over 0.2.7
@everyone - go thank whirleyes for his awesome app!
edit: link in original post
@OP - can you confirm that it would be possible to actually install up to 4 roms at once on the atrix 2? What other partitions does Bootmenu utilize for this?
Re: [TUT]Get whirleyes BMM 0.3.2 working on our a2
On which ROM did you try this? I guess it would be a bit different to get it working on the chinese jb leak as it does have internal storage enabled
Sent from my ME865 using xda premium
Re: [TUT]Get whirleyes BMM 0.3.2 working on our a2
shardul1994 said:
On which ROM did you try this? I guess it would be a bit different to get it working on the chinese jb leak as it does have internal storage enabled
Sent from my ME865 using xda premium
Click to expand...
Click to collapse
Tried on the jb itself.. The hktw rom emulates internal storage at /data/internal_sd its not a separate partition.. Tried using that.. But for some reason I couldn't get it.. Feel using data partition is better.. Btw, I am currently on the jb Wang posted..
Sent from my ME865 using Tapatalk 2
Re: [TUT]Get whirleyes BMM 0.3.2 working on our a2
snowplow said:
Thanks for this! I can say that version 0.3.2 is an amazing improvement over 0.2.7
@everyone - go thank whirleyes for his awesome app!
edit: link in original post
@OP - can you confirm that it would be possible to actually install up to 4 roms at once on the atrix 2? What other partitions does Bootmenu utilize for this?
Click to expand...
Click to collapse
That depends on the amount of space you have left on /data. If are having a retail a2, flash the JB leak and you should get 6 GB for /data..
Sent from my ME865 using Tapatalk 2
Re: [TUT]Get whirleyes BMM 0.3.2 working on our a2
Ravikirancg said:
Hey everyone, whirleyes updated and released his amazing recovery.. It allows you to multiboot and has ton of more amazing tools..
Go here for original thread he posted in the razr forum.. http://forum.xda-developers.com/showthread.php?t=2005187
well, its tested and made only for razr, but theres a simple way to get it working on our Atrix 2.. here is how you can do it..
1) Download and install BMM from google play https://play.google.com/store/apps/details?id=com.projectlense.bootmenu.manager
2) Our phone does not have a partition for internal storage.. so we use the data partition for it.. To do so, just open a root browser like root explorer and navigate to /etc/bmm/conf
3) Open "recovery.fstab" with a text editor
4) The last line will be something like this
/int vfat /dev/block/mmcblk1p25
5) just change 'vfat' to 'auto' and 'mmcblk1p25' to 'userdata' (its the same though..)
so that it looks like this
/int auto /dev/block/userdata
and of course save it and close it..
6) Done.. you are good to go.. Happy Multi Booting..
Just some tips
On your first reboot, tap the android, go to settings-->System_2-->Partition setup and tap on ACTIVATE. This formats cdrom partition to ext2.
Now go back 2 two steps, and select any other system(3-6). choose Partition setup, tap on system.img, tap on Create, select the size, create it. go back and do the same with data.img and cache.img.
Once thats done, go back and select recovery, select switch system. choose your system that you created the images for, the colour will change, install any custom rom.. Enjoy!!
NOTE: BMM stores the images in internal memory(/int/clockworkmod/virtual/system_($num)). Since we dont have emmc partition and are using the data partition for /int, doing a factory reset will wipe it out and you will lose all your other roms.. So be carefull..
Click to expand...
Click to collapse
Hmm good one u stole my opportunity to post this
but bro what are u dual booting I am scratching my head since the custom rom I made myself from jb leak is all good but just does not identify apk files
Ahaha just hilarious problem please pm me if u can help
Sent from my ME865 using xda app-developers app
I don't see the bmm folder :?
Ravikirancg said:
4) The last line will be something like this
/int vfat /dev/block/mmcblk1p25
Click to expand...
Click to collapse
I'll try to automate this by determining devices type. (ro.product.board)
But still hard for me to give edison full support because some part is still hardcoded for spyder.
Just don't use firmware flashing function.
Flashing boot.img theoretically should be OK. Don't play with CID ~
I'm not responsible if anything goes wrong, I have no idea how it will behave on edison.
whirleyes said:
I'll try to automate this by determining devices type. (ro.product.board)
But still hard for me to give edison full support because some part is still hardcoded for spyder.
Just don't use firmware flashing function.
Flashing boot.img theoretically should be OK. Don't play with CID ~
I'm not responsible if anything goes wrong, I have no idea how it will behave on edison.
Click to expand...
Click to collapse
WHOA!! So I just escaped a possible brick!
I was on the official JB leak and was experimenting with kexec(with the files meant for ICS).. and that used to mess up my CID.. luckily, I had bmm installed and had a backup of my CID(not through bmm)..
well, bmm automagically found out that my CID was messed, and bypassed it.. later I flashed my CID and luckily, everything was fine..
So, in short,
1) Bypassing CID works.. :good:
2) Flashing CID works.. :good:
maybe you already know this, but just wanted to say, using kexec on official JB update might mess up CID.. I guess this is moto's work..
so you guys with razrs be careful..
glad to see you around..
brianmoyano said:
I don't see the bmm folder :?
Click to expand...
Click to collapse
It will be in /system/etc/
Ravikirancg said:
It will be in /system/etc/
Click to expand...
Click to collapse
It isn't showing there for me either - trying a reboot and maybe a reinstall of the program.
EDIT - Well, that was silly - after installing from the Play Store you need to click on the icon and install it a second time? Huh.
So, I have a question - when we're creating the partitions for system, data and cache how large would you recommend we make them?
Ravikirancg said:
WHOA!! So I just escaped a possible brick!
I was on the official JB leak and was experimenting with kexec(with the files meant for ICS).. and that used to mess up my CID.. luckily, I had bmm installed and had a backup of my CID(not through bmm)..
well, bmm automagically found out that my CID was messed, and bypassed it.. later I flashed my CID and luckily, everything was fine..
So, in short,
1) Bypassing CID works.. :good:
2) Flashing CID works.. :good:
maybe you already know this, but just wanted to say, using kexec on official JB update might mess up CID.. I guess this is moto's work..
so you guys with razrs be careful..
glad to see you around..
Click to expand...
Click to collapse
There are a lot of issues with kexec and this phone, and why we never did any "real" work with it, once it was fully developed. There are other issues with kexec and this phone, but it really is not something I would put anymore time into, with this phone. Motorola has really done some very nasty things to this phone and continuing the evil with Atrix HD and making that phone even more locked down than this one.
There is really no reason to have a kexec kernel other than to say you made one. We have a form of OC and we have custom opensource roms, so kexec and kernels really are not needed on this phone.
P.S. kexec on this phone can be very dangerous as you will load the "stock" moto kernel during the bootloader check, then once booted kexec will unload that "stock" kernel and load the new one, but I warn you that if the ROM is not built to handle the kernel disastrous consequences can and will occur.
Re: [TUT]Get whirleyes BMM 0.3.2 working on our a2
Tried installing BMM and I got this... also can't find /etc/bmm/conf with root explorer.
Sent from my MB865 using xda app-developers app
fran7382 said:
Tried installing BMM and I got this... also can't find /etc/bmm/conf with root explorer.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Don't reboot your phone. Because you're going to run into bootloop.
Ravikirancg said:
Hey everyone, whirleyes updated and released his amazing recovery.. It allows you to multiboot and has ton of more amazing tools..
Go here for original thread he posted in the razr forum.. http://forum.xda-developers.com/showthread.php?t=2005187
well, its tested and made only for razr, but theres a simple way to get it working on our Atrix 2.. here is how you can do it..
1) Download and install BMM from google play https://play.google.com/store/apps/details?id=com.projectlense.bootmenu.manager
2) Our phone does not have a partition for internal storage.. so we use the data partition for it.. To do so, just open a root browser like root explorer and navigate to /etc/bmm/conf
3) Open "recovery.fstab" with a text editor
4) The last line will be something like this
/int vfat /dev/block/mmcblk1p25
5) just change 'vfat' to 'auto' and 'mmcblk1p25' to 'userdata' (its the same though..)
so that it looks like this
/int auto /dev/block/userdata
and of course save it and close it..
6) Done.. you are good to go.. Happy Multi Booting..
Just some tips
On your first reboot, tap the android, go to settings-->System_2-->Partition setup and tap on ACTIVATE. This formats cdrom partition to ext2.
Now go back 2 two steps, and select any other system(3-6). choose Partition setup, tap on system.img, tap on Create, select the size, create it. go back and do the same with data.img and cache.img.
Once thats done, go back and select recovery, select switch system. choose your system that you created the images for, the colour will change, install any custom rom.. Enjoy!!
NOTE: BMM stores the images in internal memory(/int/clockworkmod/virtual/system_(num)). Since we dont have emmc partition and are using the data partition for /int, doing a factory reset will wipe it out and you will lose all your other roms.. So be carefull..
NOTE 2: USE ONLY SYSTEMS 3 TO 6 FOR CUSTOM ROMS.. SUSTEM 2 IS CDROM PARTITION.. YOU ACTIVATE IT ONCE AND DONE.. DONT TOUCH IT AGAIN.. ITS ONLY 12MB..
Click to expand...
Click to collapse
Hi Ravikirancg,
I have a question with regards to your CM10.1 and the patch. I have an A2 AT&T running BMM 0.3.2 and SCV7 1st partition and ICS stock in 2nd partition. I am planning to flash CM10.1 in 2nd partition, my question is do I have to wipe system, cache and data or just the cache and data.
My apologies for posting this question here as I dont have access to post in dev forum .
Also I do not want to brick another A2
Re: [TUT]Get whirleyes BMM 0.3.2 working on our a2
brianmoyano said:
Don't reboot your phone. Because you're going to run into bootloop.
Click to expand...
Click to collapse
I can install it from the play store but when I open the app and run the installer I get that error and it prompts me to uninstall the app.
fran7382 said:
I can install it from the play store but when I open the app and run the installer I get that error and it prompts me to uninstall the app.
Click to expand...
Click to collapse
Yes, i was in the same situation. And has to reflash again the Jellybean fxz because i don't knew how to solve it.
Hey all.
I just recently saw the light and came over to android from the iPhone 4s! I found a great deal on a used Atrix 2 and have been very happy with it so far. I have already rooted my device and have installed bootstrap. I've been reading up on all the custom ROMs and want to try a few - specifically Paranoidandroid, CM10.1, miui, numa and CM10 - hence the need for BMM.
I've already downloaded and purchases Titanium Backup and read up how to use it to back up my apps, their settings, wifi settings, bookmarks, etc.
I have figured out my next steps are to back up my apps and install paranoidandroid (because it comes with BMM). There are great instructions out there on how to dual boot and install another custom ROM, so I'm pretty comfortable there.
However, I want to be able to boot into the stock ROM as well - just in case (I'm paranoid like that - no pun intended :silly. I have not been able to find out much information on how to dual boot with the stock rom - which is the reason for this post.
I've already done a full backup with bootstrap, so I'm good there. I've downloaded RSDLite and the fxz as well as read up how to recover if I run into troubles.
Can someone explain to me how to install the stock ROM in BMM?
Thanks for everyone's help and a special THANK YOU to all the developers!!
Atrix 2 Specs:
MB865
AT&T Model
AT&T Service
32GM MicroSD card
John
NIS1169 said:
However, I want to be able to boot into the stock ROM as well - just in case (I'm paranoid like that - no pun intended :silly. I have not been able to find out much information on how to dual boot with the stock rom - which is the reason for this post.
Can someone explain to me how to install the stock ROM in BMM?
Click to expand...
Click to collapse
Remove the bootstrapper recovery completely.Then install boot menu app from market and install the hijacks and go from there creating systems and installing ROMs just leave the system 1 which will be having stock in your case.
---------------------------------------------------
May the -Mass times Acceleration-be with You...
deveshmanish said:
Remove the bootstrapper recovery completely.Then install boot menu app from market and install the hijacks and go from there creating systems and installing ROMs just leave the system 1 which will be having stock in your case.
---------------------------------------------------
May the -Mass times Acceleration-be with You...
Click to expand...
Click to collapse
Sweet! Now I just need to research how to remove the bootstrapper recovery.
Thanks!!!!
:highfive:
How to remove bootstrap from Atrix 2
Ok,
After doing some research, I found out the following. Could someone please confirm these steps - I don't want to brick and/or bootloop my phone.
1 - Uninstall bookstrap.apk via settings > apps > atrix 2 bootstrapper > uninstall
2 - Delete file /system/bin/logwrapper
3 - Rename file /system/bin/logwrapper.bin to /system/bin/logwrapper
4 - Delete file /system/bin/hijack
5 - reboot * ^
* NOTE: all the research I've done mentions:
- deleting file /system/bin/mot_boot_mode and then
- renaming file /system/bin/mot_boot_mode.bin to /system/bin/mot_boot_mode.
However, I don't have a mot_boot_mode.bin. As I understand it, those of us on Atrix 2 do not have a mot_boot_mode.bin because our bootloader has not been cracked, and we can't boot directly into bootstrap. The .bin file is the original file that is backed up when bootstrapper is first installed. As such, you DO NOT want to delete mot_boot_mode, because it is the original file and is needed to boot. Can someone please confirm my thinking on this?
^ NOTE2: one post mentions deleting directory /preinstall/recovery
However, I do not have this directory. I just have /preinstall/ and it is empty. I'm assuming I can just leave this alone. Again, please confirm?
For steps 2 through 4, it is recommended to use RootExplorer, but I've also read that you can use ES File Explorer. I currently have ES File Explorer - can someone confirm that I can use this as well.
For reference, this is where I got my information:
http://theunlockr.com/2012/01/24/how-to-install-bootstrap-recovery-on-the-motorola-droid-razr/
http://www.droidxforums.com/forum/droid-x-rs-guides/13507-how-install-remove-bootstrap-recovery.html
http://forum.xda-developers.com/showthread.php?t=1727884&page=2
All three sites above have to do with the droid razr, which is why I want conformation from those that are more knowledgeable than me on the Atrix 2.
Thanks again for everyone's help! :good:
John
Only do the steps 1-5 you mentioned ignore everything else.And yeah you can use ES file explorer too.
---------------------------------------------------
May the -Mass times Acceleration-be with You...
BMM Options for Stock ROM
deveshmanish said:
Only do the steps 1-5 you mentioned ignore everything else.And yeah you can use ES file explorer too.
---------------------------------------------------
May the -Mass times Acceleration-be with You...
Click to expand...
Click to collapse
Ok,
I did it! I removed bootstrap and installed BMM...now I'm afraid to reboot!
I'm looking BMM > Manager > Systems > System 1 and the following boot options are all "ON"
- Custom kernel (2nd-boot)
- Custom kernel (kexec)
- Custom init (2nd-init)
- Insecure adb
Since I want to leave the stock ROM on System 1, do I want to turn all of these options "OFF"? I would think so since the custom ROM doesn't use any of these.
EDIT: I just looked in /system/bin/ and I don't see "hijack". I see logwrapper and logwrapper.bin though.
I Installed boot menu manager from Google Play and launched it (v0.3.4), then clicked on "Installer", then Install. I saw the message "fixing permissions & hijack" fly across near the end, and got the message "A system menu choices will be displayed during boot process."
So I guess everything is ok? This version is unlike v0.2.x and doesn't show you what has been installed successfully and what hasn't with checkmarks.
The lack of hijack in /system/bin/ really concerns me....
EDIT2: So I found this: http://forum.xda-developers.com/showthread.php?t=2115715&highlight=0+3+4
And modified the recovery.fstab as directed in OP. However, it still does not answer my previous questions.
Thoughts?
Thanks again!
John
The new BMM handles things a bit differently.Don't strain yourself too much.Hit the button and reboot and then join the flashing gang.
---------------------------------------------------
May the -Mass times Acceleration-be with You...
NIS1169 said:
The lack of hijack in /system/bin/ really concerns me....
Click to expand...
Click to collapse
If you have a new logwrapper and a logwrapper.bin, then you have been hijacked.. There is no "hijack" binary used in the new bmm
Sent from my MB865 using xda app-developers app
the easiest way to remove bootstrapper files i found is just clear its data and then uninstall it.
no need to track down all those logwrappers
worked for me evrytime.
Thank You!!!
Hey, thanks to all you guys! I got it installed, and rebooted and everything works!
I have a few questions about using BMM, but I'll ask those questions in the appropriate thread (http://forum.xda-developers.com/showthread.php?t=2115715).
Thanks again, you guys rock!
John
This will help anyone who keeps having flashing issues.
More detailed instructions in my GUIDE!
http://forum.xda-developers.com/showthread.php?t=2295557
THIS IS ONE QUICK/SIMPLE ERROR FREE ROM FLASHING PROCEDURE
This should eliminate a few posts saying, stuck in download mode, stuck at logo. just vibrates and them MANY other issues that somehow, everyone seems to find.
Here is my quick rom flashing process I use ALWAYS (yes always)
THINGS YOU NEED ON extSDCARD
1. Extra kernels (2 or 3 you know works for your device)
2. Optional: 2 recoveries that can be flashed (I use CWM & TWRP)
3. Optional: apps.zip (a zip created from Titantium BU, containing Root Explorer, TU Backup, Quickpic, ES File Explorer and Terminal Emulator)
Flashing the rom: TOUCHWIZ/AOSP ROMS
1. Backup current rom (to the extsdcard)
2. Complete wipe, (I do complete, some people do not) Complete = No Issues [FACTORY RESET + CLEAR CACHE + CLEAR DALVIK CACHE + CLEAR DATA]
3. Flash the rom
4. Flash the kernel (your device kernel) (I know some roms have their own kernel) this is where your problems start.
AGAIN: FLASH YOUR KERNEL, you KNOW it works. 1 more time FLASH YOUR KERNEL. (you can experiment with other kernels after you boot)
AOSP ROMS - require you to flash gapps before you boot. [This is not required for TouchWiz roms]
5. Boot the rom.
FINISHED!!!! SUCCESS!!!
Total time to flash a rom:
7-10min
Errors - NONE
This goes for every rom in my guide.
TIPS:
This flash procedure is for Touchwiz Roms, if you are flashing AOSP roms, you must flash the gapps package associated with the rom you are flashing.
**** SGH-I337M Users: Often requires flashing a different kernel than the one included in most ATT ROMS. Any GT-i9505 kernel will work and Adam kernel and Faux kernel are both confirmed working for us Canadian users.
Note: Flash KERNEL directly after ROM then reboot device.
[Special thanks to blyndfyre for this helpful tip].
The extra recovery I flash if a rom does not like the recovery I am using.
Yes, you can flash recoveries back and forth.
Apps.zip I flash after the rom is up & running. This I use to get the rom setup (like root explorer and others needed)
HELPFUL LINKS: In post #2
I am in no way responsible for anything that may do damage to any device - Use these tips at your own risk - period!
If you found this useful in any way, please hit the THANKS button for my effort.
Under Contruction:
ATT US:
[Index][S4ATT] Roms/Kernel/Recovery[Original Android & Android Development]
http://forum.xda-developers.com/showthread.php?t=2312444
Sprint:
[DIRECTORY][☆ ★ UPDATED 7/2/13 ☆ ★] ALL Sprint S4 Roms/Kernels/Recoveries/Mods/Themes
http://forum.xda-developers.com/showthread.php?p=42044738post42044738
T-Mobile:
[INDEX] ROMs,Recoveries,Kernels,Guides etc
http://forum.xda-developers.com/showthread.php?t=2332717
Verizon:
[GUIDE] Official List of Roms, Mods, Kernels, Root, etc
http://forum.xda-developers.com/showthread.php?t=2297370
Canadian Variant Galaxy S4 (SGH-I337M)
Here is the Canadian stock Rom/Kernels Thread: (this should help you get started)
http://forum.xda-developers.com/show....php?t=2269304
Suggest you add that SGH-I337M users must often require flashing a different kernel than the one included in most ATT ROMS. Any GT-i9505 kernel will work and Adam kernel and Faux kernel are both confirmed working for us Canadian users.
Note: Flash KERNEL directly after ROM then reboot device.
Will do, I will get it done soon. Hows that?
Great thanks for not forgetting us Canadians
Question: How do you get an apps.zip with TiBa? I would love to do this and save having to download each app from the Play store each time.
blyndfyre said:
Great thanks for not forgetting us Canadians
Question: How do you get an apps.zip with TiBa? I would love to do this and save having to download each app from the Play store each time.
Click to expand...
Click to collapse
Hit the menu button when in TiBa, it will bring up an option to create a zip, it rocks, I use it for multiple things, you can name it anything you want, flashes perfect every time. When I want to setup a rom, I have to use those apps, like the root explorer. I hate doing a complete restore or picking thru it to get what I need, so I flash the zip with the only things I need.
if you see anyone having flashing issues, send them here.
TheAxman said:
Hit the menu button when in TiBa, it will bring up an option to create a zip, it rocks, I use it for multiple things, you can name it anything you want, flashes perfect every time. When I want to setup a rom, I have to use those apps, like the root explorer. I hate doing a complete restore or picking thru it to get what I need, so I flash the zip with the only things I need.
Click to expand...
Click to collapse
Nice so I can flash the zip I make in TiBa through recovery? Didn't know that thanks for the tip Ax.
This is a great write up! Easy and informative. The axman is the man! Should be stickied.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Thanks to both you guys, that app zip when you see what you can do with it, you will be ticked off that you didn't find it sooner, flash rom, flash apps.zip.
JD..thanks man, if I put one more word in that post...it will run a few people off, to much to read
I think it is simple, and when a few people see that it was that easy, they also are going to be ticked off.
[OP has been UPDATED: 07-04-2013]
Just wanted to say thanks didn't know about app.zip that's gonna save me some time, and great guide for us noobs:thumbup:
Sent from my SGH-I337 using xda premium
Thx!
IEndz said:
Just wanted to say thanks didn't know about app.zip that's gonna save me some time, and great guide for us noobs:thumbup:
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
NP, you have anything to add let me know, I will take a look at it.
Thanks
[out of thanks right now, I will catch ya]
Jeefff said:
Thx!
Click to expand...
Click to collapse
Thanks
[out of thanks right now, I will catch ya]
Wow, you guys didn't know TiBU could do this?
apps.zip (a zip created from Titantium BU, containing Root Explorer, TU Backup, Quickpic, ES File Explorer and Terminal Emulator)
This is helpful when you get the rom fully booted, and you have to do some changing of things like pushing apps to the system/apps dir, all the zip is a combination of tools I think are needed to get the rom up to speed, I have been using this since the G3 days, speeds up my testing of the roms for my guide also.
Glad I could share the info for everyone.
Hope it helps.
Thanks to all.
Just had 3 PM from people with issues doing this flash procedure. I fixed them, but here is my issue.
HOW HARD CAN THIS BE!!!!!
This is the easiest steps EVER.
DO IT STEP 1, STEP 2 AND SO ON.
You need it more simple:
BACKUP
COMPLETE WIPE
FLASH ROM
BEFORE BOOT FLASH CORRECT KERNEL
BOOT ROM
5 steps....EASY EASY EASY EASY EASY AND EVEN EASY!
And last but not least - EASY
Solution 2:
If you can not do this, you need to sell your phone to me, and go out and buy a flip phone, or a iPuke. those are the easiest fool proof phones for people who can not read or follow simple instructions.
TheAxman said:
Just had 3 PM from people with issues doing this flash procedure. I fixed them, but here is my issue.
HOW HARD CAN THIS BE!!!!!
This is the easiest steps EVER.
DO IT STEP 1, STEP 2 AND SO ON.
Click to expand...
Click to collapse
You can lead a horse to water.......
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
You can lead a horse to water.......
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I try, but no one is listening.
Again, if you find them lost to the situation send em here...
Hey guys.
My final goal is to get Cyanogenmod11 on my Atrix 2.
I know there are 3 stages to do this.
Atrix 2 Specs:
Official ICS 4.0.4
Unrooted
What I am planning to do:
1. ROOT using http://forum.xda-developers.com/showthread.php?t=1742879
2. Clockwordmod Recovery using http://theunlockr.com/2012/11/14/how-to-install-clockworkmod-recovery-on-the-motorola-atrix-2/ (Atrix2Bootstrap.apk), because Boot Menu Manager is so confusing, and I'm not used to partitions.
3. Flash a CM11 ROM with proper gapps (need help).
Where I need help:
1. I want to know if the rooting method and the CWM method will work.
2. I can't find any proper CM11 ROM+GApps where people have commented "success!"
3. All the tutorials I find just say use BMM. I want to use CWM, how do I go about flashing a ROM with CWM (Bootstrap) on Atrix 2? Can I get some steps for this?
4. My motorola drivers are from https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481 , if that's right.
I'm requesting the amazing xda-devs team for help.. thanks in advance.
Same confusion for me :/ which method to follow :/
1. You posted this on the wrong section.
2. Rooting method will work. But will not. Why? You'll find out momentarily.
3. I think in every thread, including cm has gapps' link. Any gapps will do fine. Unless that is specified by the dev.
3. Here's the answer. All roms here only use BMM to flash. No other. There's a reason why the tutorials say BMM. Fyi, BMM is cwm based.
4. Head over to general section. There you will find a tutorial how to set BMM up.
5. If this is so hard for you, the most preliminary step is a must for you. Snoop around and read.
Sent from my MB865 using XDA Premium 4 mobile app
---------- Post added at 06:53 PM ---------- Previous post was at 06:53 PM ----------
noranora said:
1. You posted this on the wrong section.
2. Rooting method will work. But CWM will not. Why? You'll find out momentarily.
3. I think in every thread, including cm has gapps' link. Any gapps will do fine. Unless that is specified by the dev.
3. Here's the answer. All roms here only use BMM to flash. No other. There's a reason why the tutorials say BMM. Fyi, BMM is cwm based.
4. Head over to general section. There you will find a tutorial how to set BMM up.
5. If this is so hard for you, the most preliminary step is a must for you. Snoop around and read.
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sent from my MB865 using XDA Premium 4 mobile app
BMM is not that hard to use as it look !! :angel:
Even I also got confused for very first time after watching the video, but dont worry you can do it it not that difficult
Just root your phone by any method then
install BMM from play store -->> open it -->> give root access to it -->> let it do its work -->> i dont remember but may be it will restart phone, if not then restart your phone (after its work is finished) -->> on restart -->> you will see motorola logo and after that android logo (green) -->> click on it -->> then follow the BMM vdo tutorial
(I am kinda lazy about writing all steps )
PM me or any member we will help you if you stuck anywhere..... but you have to watch the complete vdo and try to understand it first
noranora said:
1. You posted this on the wrong section.
2. Rooting method will work. But will not. Why? You'll find out momentarily.
3. I think in every thread, including cm has gapps' link. Any gapps will do fine. Unless that is specified by the dev.
3. Here's the answer. All roms here only use BMM to flash. No other. There's a reason why the tutorials say BMM. Fyi, BMM is cwm based.
4. Head over to general section. There you will find a tutorial how to set BMM up.
5. If this is so hard for you, the most preliminary step is a must for you. Snoop around and read.
Sent from my MB865 using XDA Premium 4 mobile app
---------- Post added at 06:53 PM ---------- Previous post was at 06:53 PM ----------
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, kinda sorry about the wrong section thing, I guess I should've posted it in the help section. Btw what do you mean when you say the rooting method will not work? And what I mean by the cm11 threads is that they provide non working gapps where many users have complained of an error "installation aborted".. Thanks though.
Sent from my Amazon Kindle Fire HD running CyanogenMod 11
sameerm02 said:
BMM is not that hard to use as it look !! :angel:
Even I also got confused for very first time after watching the video, but dont worry you can do it it not that difficult
Just root your phone by any method then
install BMM from play store -->> open it -->> give root access to it -->> let it do its work -->> i dont remember but may be it will restart phone, if not then restart your phone (after its work is finished) -->> on restart -->> you will see motorola logo and after that android logo (green) -->> click on it -->> then follow the BMM vdo tutorial
(I am kinda lazy about writing all steps )
PM me or any member we will help you if you stuck anywhere..... but you have to watch the complete vdo and try to understand it first
Click to expand...
Click to collapse
Thanks a lot man, I appreciate this. But my main worry was the partitions. Its extremely complicating, and I thought clockwork mod recovery aka bootstrap was a better and easier option.
Sent from my Amazon Kindle Fire HD running CyanogenMod 11
Opps. My bad. The rooting method will work. But CWM will not. Because if you want to flash kk rom, you'll need BMM. I'm pretty sure altered stated that, any gapps will do fine. But preferably pa gapps. But if you want it running on main system, you need other gapps. As pa minimal gapps too big for our data partition. So there it is. Fail to install. As for allocating partition for other system, it's pretty simple and easy actually. I'll leave sameer or other member to answer.
Sent from my MB865 using XDA Premium 4 mobile app
noranora said:
Opps. My bad. The rooting method will work. But CWM will not. Because if you want to flash kk rom, you'll need BMM. I'm pretty sure altered stated that, any gapps will do fine. But preferably pa gapps. But if you want it running on main system, you need other gapps. As pa minimal gapps too big for our data partition. So there it is. Fail to install. As for allocating partition for other system, it's pretty simple and easy actually. I'll leave sameer or other member to answer.
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is really complicated now.. I had installed CyanogenMod on a Motorola defy and my kindle fire, and there were no partitions and stuff. I don't care much for dual boot and partitions.. Not like I like Motorola's OS anyway. Thanks though.
Sent from my Amazon Kindle Fire HD running CyanogenMod 11
I can rephrase my queries.
What I'm having issues with is:
I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
It would be cool if I could get quick help on installing BMM, it's very confusing.
Also, flashing the ROM with BMM is also very confusing.
Thanks in advance.
EDIT: Rooted phone.
androidnewbie123 said:
I can rephrase my queries.
What I'm having issues with is:
I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
It would be cool if I could get quick help on installing BMM, it's very confusing.
Also, flashing the ROM with BMM is also very confusing.
Thanks in advance.
EDIT: Rooted phone.
Click to expand...
Click to collapse
See this video tutorial for BMM
http://forum.xda-developers.com/showthread.php?t=2602229&page=1
androidnewbie123 said:
[*]I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
Click to expand...
Click to collapse
If you don't want multiple partitions the don't set any up. Just skip that part. I never use more than one ROM either.
androidnewbie123 said:
[*]It would be cool if I could get quick help on installing BMM, it's very confusing.
Click to expand...
Click to collapse
Download the app, open it, select "install". Done.
androidnewbie123 said:
[*]Also, flashing the ROM with BMM is also very confusing.
Click to expand...
Click to collapse
Reboot the phone. After the Motorola logo you'll see an green android with spinning gears. Within 3 seconds tap on the android. Then select "recovery". Go to "wipe and clean" and do a factory reset. Go back and select "install zip package", then "install zip from storage". Choose the file from your SD card using the volume keys to navigate and power to select. Install gapps the same way then reboot. Done.
androidnewbie123 said:
I can rephrase my queries.
What I'm having issues with is:
I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
It would be cool if I could get quick help on installing BMM, it's very confusing.
Also, flashing the ROM with BMM is also very confusing.
Thanks in advance.
EDIT: Rooted phone.
Click to expand...
Click to collapse
Ok...i will try to keep it as simple as i can
1) It would be cool if I could get quick help on installing BMM, it's very confusing.
Ans :
Please , i say please if u want to go somewhere with your A2 , u hav to start loving BMM and love it truely madly deeply because without it A2 wouldnt get any of the goodies it has.The video is confusing i agree..i didnt do it when the video was out...Its fairly simple you know...here i list the easy steps..follow them 1 by 1 and do it simultaneously with your device....it wont be difficult...
You can find the complete instructions in the quote below :
>Download and install BMM from google play https://play.google.com/store/apps/d...otmenu.manager
>Our phone does not have a partition for internal storage.. so we use the data partition for it.. To do so, just open a root browser like root explorer and navigate to /etc/bmm/conf
>Open "recovery.fstab" with a text editor
The last line will be something like this
/int vfat /dev/block/mmcblk1p25
Just change 'vfat' to 'auto' and 'mmcblk1p25' to 'userdata' (its the same though..)
So that it looks like this
/int auto /dev/block/userdata
and of course save it and close it..
Done.. you are good to go.. Happy Multi Booting..
Just some tips
On your first reboot, tap the android, go to settings-->System_2-->Partition setup and tap on ACTIVATE. This formats cdrom partition to ext2.
Now go back 2 two steps, and select any other system(3-6). choose Partition setup, tap on system.img, tap on Create, select the size, create it. go back and do the same with data.img and cache.img.
Once thats done, go back and select recovery, select switch system. choose your system that you created the images for, the colour will change, install any custom rom.. Enjoy!!
NOTE: BMM stores the images in internal memory(/int/clockworkmod/virtual/system_(num)). Since we dont have emmc partition and are using the data partition for /int, doing a factory reset will wipe it out and you will lose all your other roms.. So be carefull..
NOTE 2: USE ONLY SYSTEMS 3 TO 6 FOR CUSTOM ROMS.. SUSTEM 2 IS CDROM PARTITION.. YOU ACTIVATE IT ONCE AND DONE.. DONT TOUCH IT AGAIN.. ITS ONLY 12MB..
IMPORTANT NOTE: DO NOT INSTALL BMM IF YOU USED A2 BOOTSTRAPPER BEFORE. THAT WILL MESS THINGS UP WITH YOUR LOGWRAPPER.BIN. THERE IS A GOOD CHANCE YOU WILL BOOT LOOP AFTER REBOOT. NOW IF FOR SOME REASON YOU DID NOT READ THIS, AND GET A MESSAGE ABOUT BMM ASKING YOU TO GET HELP, BEST THING FOR YOU TO DO IS RECHARGE YOUR BATTERY FULLY AND FXZ BACK. OR THERE IS A GOOD CHANCE YOU WILL HAVE TO USE MCGRUVYER METHOD OR ANOTHER A2 BATTERY. USER RAD7 RECENTLY HAD QUITE A LOT OF TROUBLE WITH HIS BATTERY DYING AFTER BMM MESSED WITH LOGWRAPPER. YOU HAVE BEEN INFORMED.
2) I don't want to have multi boot or partitions, installing CM11 as the default boot is preferable.
Ans :You dont need to multi boot mandatorily.You can flash any ROM of your choice on system 1. That will be the only single ROM you have on your device...
Again..really sorry..BMM is the way...You hav to learn to love it....and it will love your phone back
3) Also, flashing the ROM with BMM is also very confusing.
Ans : After you install and go through the UI once. I bet it will be the simplest thing you ever used..Even more simple than the FB app u regularly use :silly::silly:
Thanks to both of you guys
Installed BMM, but need to flash ROM on system 1. Don't really care about multi boot.. how do I just do that with BMM?
androidnewbie123 said:
thanks to both of you guys :d
installed bmm, but need to flash rom on system 1. Don't really care about multi boot.. How do i just do that with bmm?
Click to expand...
Click to collapse
↓↓↓↓
1badwolf said:
reboot the phone. After the motorola logo you'll see an green android with spinning gears. Within 3 seconds tap on the android. Then select "recovery". Go to "wipe and clean" and do a factory reset. Go back and select "install zip package", then "install zip from storage". Choose the file from your sd card using the volume keys to navigate and power to select. Install gapps the same way then reboot. Done.
Click to expand...
Click to collapse
androidnewbie123 said:
Thanks to both of you guys
Installed BMM, but need to flash ROM on system 1. Don't really care about multi boot.. how do I just do that with BMM?
Click to expand...
Click to collapse
Also remember ..as you are going to install on system 1...only BANKS MINIMAL GAPPS will work...Link to BANKS Minimal is there in the CM11 thread by ALtered
Happy flashing
Thank you all people, I managed to do it.
Sent from my Amazon Kindle Fire HD running CyanogenMod 11