Related
This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128
pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect
pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.
gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?
If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!
I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.
Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.
please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.
I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.
Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.
YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App
amoled or samoled though?
My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App
Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?
Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App
My battery cover is a little loose all of a sudden. at the bottom it now moves a little. When I squeeze (lightly, normal use amount) the phone at the bottom kinda clicks. Anyone else have this issue?
Yes. I called HTC and they're replacing it. But for now what you can do is put paper inside the case
Sent from my HTC Sensation 4G using XDA App
Yeah, several other people reported this problem on a Dutch forum. People should not open the backcover unless they really have to. After opening the cover a few times the cover is getting loose and starts to crack when you press it.
okay so I have the same problem, should I be worried or is it just the case with all sensation handsets ?
Take the cover off and press the battery. I think that's what it is...or maybe both.
Sent from my HTC Sensation 4G using XDA Premium App
secano said:
Take the cover off and press the battery. I think that's what it is...or maybe both.
Sent from my HTC Sensation 4G using XDA Premium App
Click to expand...
Click to collapse
I don't think that's it, the battery is fitted normally, and I've just tested it with battery removed, it does the same thing, I should mention that it isn't really that obvious, but it's an annoyance nonetheless, such an expensive phone to have a glitch like that.
can anybody confirm that it does loosen after some time of usage, I mean did it came like that out of the box or was it getting loose with time?
I just noticed this on mine this morning , will steal a new cover soon
****ttttt let me check mine lol
...same here, at the right bottom corner!!!!
...and I agree, tooooo expensive phone for such a glitch!
Spekko said:
I just noticed this on mine this morning , will steal a new cover soon
Click to expand...
Click to collapse
I went to a tmobile store to see if they'll let me switch. The rep told me thy they can't switch cuz its an htc problem. Then he got curious and pulled out his sensation to see if his had it...
He looked so sad lol I just got off the phone with htc and my replacement cover is shipping soon and if the second one is defective then I have to send in my whole phone so they can check it out. You guys should call htc I'd you already haven't
I fixed mine by adding some paper to the back.
http://forum.xda-developers.com/showthread.php?t=1215096
Hey first post here! Signed up just to have my say on this issue, just as i did with the android central forum.
Also posted this on the android central forums...
Got the creaking here also, definitely a design flaw. Being obsessive with my devices i couldnt live with it!
I do not recommend putting paper in the cover to fill the gap, as this is just expanding the cover further making it even MORE loose when the paper is not in there. Also i wouldn't recommend it because the paper pushes the back cover out a little more, you may loose a connection for the ground. Which is the little metal springy thing, half way up the right hand side. Obviously its not a good idea to 'push' the cover further away from this ground spot. I have heard that people have had issues with screen responsiveness due to a static build up from not grounding properly.
What i did to fix this problem was a bit of a kitbash of sorts.
Mine was creaking on the bottom right area, like most. The problem is there is too much play between the little black catches on the battery cover and the latch on the handset. Instead of filling up the gap between the phone and the cover (Ala paper, card in the cover) I closed it!
What you need to do is get some very thin plastic film. Like that on kids toy packaging etc. Not the thicker stuff though. This stuff would be under 1mm thick. It came as a viewing window in the box my new wallet came in. So you can sorta imagine what im talking about.
I cut a piece about 10mm long and as wide as one of the two little black catches. I applied a VERY thin coat of super glue to one end of the film. Just enough to cover the area under the catch. Then i carefully placed the film with the superglue on it under the catch, and then quickly applied some pressure to it with some tweezers. Then i carefully cut the excess off with a pair of finely tipped nail scissors.
The result is that it now PULLS the screen/phone INTO the cover more by making the little black catch thicker. Not the opposite (paper method), which pushes the cover out, creating a further problem of adding more paper under the cover over time as the cover expands/loosens to compensate. Not to mention a possible grounding loss and resulting damage.
Hope this helps some people that have had multiple replacements or could not be bothered replacing for such a cosmetic issue. (Like me). It definitely works, just got to get your surgeon on and be accurate with your placement of the film.
Apply this to what ever side creaks the most, and bam its gone. Nice. Solid phone... again.
If anyone wants more specific details etc, im all ears.
Regards,
Matt.
MrSoulSOng A video explaining this fix would be appreciated ^_^ cuz I didnt buy my phone from here and I still gotta wait for about a month to send it to the shop to fix or get a replacement
...just an update...after buying new back cover from no1tech (that was month and a half ago...) there's no loose spots, no creacking...!
Very satisfied now I am. Finally phone feels and looks like it should be - beast in compact housing!
I have the very same problem too. VERY annoying
well I had the same problem however what i did was that on the back cover inside of it I put some black electric tape on to the sides that creak (next to the sides and the clips) and when I put the cover back on there was no creaking at all. figured it wont interfere with the single because people put cases on the back all the time plus its electric tape meaning it'll prevent from short circuits and I don't think there should be any overheating issue as its a very small quantity.
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
My recommendation is to buy a case that covers the phone completely, you'll forget about it...
I have a Diztronic case arriving Wednesday, but need to use it with my car dock without the case. It's not a big deal, but given that its trivial to do (except for finding the right paint) I would like to do it.
Well you're definately right, a simple cosmetic fix would be best, here's your part...
Not sure what to tell you man, maybe someone will chime in with some info or similar experience... It's just cheap plastic...
I found this on eHow:
How to Repair Chipped Plastic
You can actually get the bezel separately for $17, but the screen needs to be heated to come off - not easy. Plastic repair is easier (as you pointed out) but a good job requires good paint. Hopefully someone has already tried.
Thanks for the suggestions.
I remembered this thread from cappy section... With people making modifications to their housings... possibly you can msg one of them...
dblevitan said:
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
Click to expand...
Click to collapse
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
It's all kitted up into one part... the solution is a $250 front part of the phone...
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
thanks for repeating exactly what i said an hour before...
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
Make it easier on yourself next time, kid. Just copy/paste...
Sent from my rooted Mayan calendar
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
I looked in some drug stores for some nail polish that would match, but never found anything. It's currently in a case, so I rarely notice it. Maybe sometime when I have energy, I'll try to replace the bezel, but not for now.
Well I cracked the glass on my Galaxy S3 and there is some other superficial damage around the bezel. As I am going to be getting another phone shortly anyway I was thinking about this problem and how I could get my phone as possible to "new." After consideration I'm leaning to using an automotive paint/scratch repair pen as opposed to nailpolish. Depending on how it turns out, I'll upload my process, materials, and pictures.
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
lambstone said:
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
Click to expand...
Click to collapse
Even if i just got the product there is nothing i can do to get a replacement? I mean isnt there like a 30 day thing if im not satisfied?
Yes there is, but you have to pay half of the price to get a new one
Sent from my SGH-M919 using Tapatalk 2
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
blackguy101 said:
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
Click to expand...
Click to collapse
Yeap, http://www.spigen.com/need1more
You have to be quick, there is a 30days time frame from when you purchased.
I must be just as bad. This is the most frustrating screen protecter to apply. I've been known to mess up once but never had this much problems. It floats off center, fingers holding it and getting in the way. Front plastic made it hard to estimate the edge with the rounded corners, getting caught as well on fingers as I let go pushing it slightly to one side. Unable to pry it back up without barely scraping the adhesive ruining one corner if not multiple edges from micro fuzz etc. The squeegee is worthless on the glass, back protector is fine but just have to deal with it.
Must be me. Oh well. Good thing I get the cheap ass protector with my Neo Hybrid case.
You tried the masking tape method?
Align it the screen protector without peeling off the back cover. Once it's in place, use making tape to hold it in place, like a book. Put some a strip from the front down across onto the phone. You should be able to "open" it like the page from a book. Then apply it. Should make things easier.
a Good company will stand behind their products. After seeing my brother's Hybrid case and reading some things on their customer service, I chose to pass on Spigen.
The clear coat on his bumper part is already chipping way, the whole thing looks like a cheap Chinese knock off ( bought directly from Spigen).
Zagg for example, a product I don't recommend at all because 1) It's a horrible product 2) it's ridiculously expensive. But the only thing they have is pretty much unquestioned replacements. Which I'm sure they can do because of ridiculous markup.
BTW, it might not be your fault at all, because these are rigid glass pieces, they have to be flat in order to stick to the phone. a SLIGHT imperfection will cause it to not stick.
All that being said, I went with MIME glass protector.
I have the glas t and I love it. They are much easier to apply then typical plastic ones as they dont bend and flop around when applying. When I applied mine it lined up perfectly but I did get lint under it right in the middle of the damn screen. I tried dealing with it but couldn't take it so I lifted it half way up with my finger nail and used scotch tape to get the lint off... dropped it back down and it looked even worse. I thought i wasted 27 bucks until the morning when I looked at my screen and bubbles were gone. So it is possible to remove lint just dont touch the adhesive.
Sent from my SPH-L720 using xda premium
just pay the half price spigen charges to replace it and move on. sulk it up as paying for a learning experience.
they already mention that the best method for aligning the thing is to use scotch tape on the top and bottom aligning it then drop down.
if you dont want any dust trapped, well don't mind me for stating the obvious but... don't work in a dusty room, close windows/doors turn off fans... don't breathe too hard on it lol.
use a photo air duster like a Rocket blower, to remove any left over dust/lint from cleaning the screen. I find that camera lens solution and lens paper works perfectly for prepping the surface. use the included stickers to remove any left over dust that cannot be blown away by the rocket blower.
if you can do not reapply once completely set down, when applying make sure it's aligned, bottom edges, make sure the gaps are evenly distributed on all sides, cutout holes centered...
when applying and you notice it is not centered gently lift up but never touch the adhesive side. lift up with only scotch tape.
I've been applying screen protectors for years and have gotten it down to a science... everyone comes to me to get theirs installed haha...
Once any part of this is adhered scotch tape is useless as it's glass. you have to use a suction cup or your finger nail you just have to be careful.
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
i installed mines 5 days ago and got a 2mm air bubble on the right side of the home button i couldn't squeegee it out and doesn't seem to want to go away. has anyone else experienced this? is there anything i can do to get rid of it or will it eventually go away on its own? fortunately its not on the actual screen but its still an eyesore
i re applied my twice, wif no side effect, just dun touch the adhesive side, use industrial musking tape to lift it and for dust on under the screen, use scotch tape to remove it. key point is to never touch e adhesive side wif ur finger. nothing wrong wif this product, love it! its like the original screen, just tat if u really scratch it, u can remove it and there is the perfect screen below it.
btw for those tat claim it could b an production defects tat the glass is not perfectly straight, being in the glass industry for over 30 yrs, its actually easier and cheaper to create prefectly straight glass then any wif the slightest curve.
Sent from my GT-I9500 using xda premium
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
Same thing happened to me so I had to return it. The install came out perfect but the top left did not want to seal/adhere properly. I was so disappointed so I just went with the tried and true zagg. I purchased the protector from eBay so the return policy is different from their website.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
just tried lifting up that part of the screen for a few seconds and putting it back down. this air bubble is like a giant zit that wont go away
blackguy101 said:
I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
This is why I chose MIME. Email response is lightning quick and they include a hand written note in the package. Would definitely send you a new one without a question
Sent from my SGH-M919 using Tapatalk 2
The issue with it not laying after picking it up with your fingernail is not necessarily because the adhesive has gone bad. You need to level out the edge you stuck your nail under. Happened to me, fixed it with the squeege between the phone glass and the protector, prying up to level out the edge.
drbveb88 said:
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
So installed my tr, first try no bubbles.Seriously looks and feels like the samsung glass. AMAZING!!!
The steam trick works. Its not like its a sauna and your phone is a steamy. The steam is like a static electricity to dust.
Sent from my SCH-I535 using xda premium
Hello all. I was just wondering if I could get any input or suggestions on my first repair for this phone. I know there is going to be a of adhesive and the screen is actually going to be attached to the LCD.
Any do's or don'ts?
Thanks in advance.
If you are going the route of replacing the glass on top and not the digitizer, make sure you use a real heat gun (not a blow dryer) to heat up the adhesive and TAKE YOUR TIME. I tried to fix my daughter's screen. She had wrapped the ear buds around it and put it in her back pocket. There was like a bullet hole in the center and cracked all the way around outward from the center. I got all the way to the end, tried to remove the corner piece and I cracked the digitizer. I was tired and anxious to finish. Plenty of people are successful, so I would just say make sure you hear the glue up enough and take your time.
Sent from my SCH-I535 using xda app-developers app