Hey guys,
Recently got a Surface Pro 128GB.
Unfortunately I had to refresh windows on it yesterday as I had a mishap with some software and to save messing about I just refreshed the whole tablet.
But today at work I noticed that when I unlock the tablet on the screen where you slide the picture upwards, for a brief second as the tablet comes out of sleep I see the password screen or picture password flash behind the slide up picture.
It's hard to describe in words so here is a video:
http://youtu.be/vLUTDHM0nVg
I updated my Intel graphics drivers from the June Drive/Firmware pack from here: Download Surface Pro firmware and driver pack from Official Microsoft Download Center
Which has the Intel 15.28 drivers on it.
I wondered if anyone else on them drivers could tell me if they see a screen glitch when unlocking the tablet. Just a brief see through glitch through the slide up picture.
Thanks
Related
The bottom 1/8th portion of my screen is wigging out. It's like the pixels are stuck. A screen shot doesn't show it, but an image of the S2U2 unlock bar is halfway stuck and it is flashing. The screen shows what it's supposed to, but there is that ghost of the image there over everything.
I'm using EnergyROM 3.0 and have reflashed. I may have to send it in.
Same Problem
Same problem here, im running Da-G Clean 6.5 ROM but no S2U2... do you have the ati driver installed? I have a feeling its a mix between that and 6.5 rather than a hardware issue....?
my vodafone m802 recently shows a white screen even thought i can see all of my phones contents in active sync 4.5, when i connect my phone with SOTI Pocket Controller Pro and did a hard reset from this program it still has a white screen, i am at my widths end what can i do to resolve this issue, when i view my screen now with SOTI i can see the start up screen in SOTI but its stuck on align screen and atlas i cannot align screen as my VODAFONE M802 has a white screen and i cannot tap it to align screen i am a newbie and this is my first post PLEASE IS THERE ANYONE HERE WHO CAN HELP ME SORT THIS OUT
i guess the people on here arnt as good as they let on they are as no one has bothered to answer my post!!!!!!!!!!!!!!!
the people around here are the best in the world .
its just your phone is a pile of garbage and no one will help you coz its not in hand
ps : i have the same phone now and it really sucks
wbr,
Hi XDA,
Today I bought a tablet, the 10" Tablet PC by Qware, model QW TB-9010.
Hardware looks fine, but I'm having some issues:
First issue is that I can boot the tablet, but when I unlock it, all I see is a black screen with the notification bar at the top which works fine, but the rest is empty and black. When I press the Home button a couple of times, the wallpaper flashes up, I see the appdrawer button but then it crashes to the black screen again, so can't do anything on the device itself.
Next, the screen stopped working, I have to use a mouse to unlock it, I'm trying to fix this with new firmware but thats where we arrive at the biggest problem:
Not in the manual, the manufacturers website, or by just trying, I cannot find out how I get this device in recovery/update mode.
Support is VERY poor for this product, but I'm guessing firmware like Uberoid will work on this device, but can't install this because it doesn't boot in recovery mode or w/e.
So if anyone has any idea how they can help me or have any tips? Please let me know!
I want to fix this thing!
How long did you use this thing ?
Sent from my GT-S5830 using XDA App
A couple of minutes...
Hello there,
I bought this tablet 2 weeks ago,everything is fine but the WIFI
It keeps disconnecting or does not connect at all.
What should I do ,pls help
It has android on it only ,no windows
TIA
Hello, I have the following problems with the purchased tablet Chuwi Hi9 Air Black 64GB MediaTek Helio X23 (MT6797D) 2,31 GHz.
1. The belts will appear from time to time when using the camera.
2. After starting the tablet and turning off the screen (by briefly pressing the button), the screen can no longer be switched on again. It is necessary to hold the button longer and restart the tablet.
3. When using the device, the self-restart has been repeated several times.
4. Instead of white, the screen shows a green color. I adjusted the colors as best as I could.
Videos and photos about the problems I have described can be found here: drive.google.com/drive/folders/1RxXYozK5Sh9V9Nts3lNGP17nBCTmgTyL?usp=sharing
I thought that after some time of use described problems will disappear. Unfortunately, they are still there. Returning to factory settings also did not solve problems. The tablet has the latest updates downloaded from the internet.
Can you help me solve the problems?
Tom
Hello community i need a bit help from some experts.
I bought a MTK6797 10.1 inch Android 8.1 Tablet with no google license.
The seller told me to use BeTools to scatter or whatever to make it useable the tablet all worked until i used this progamm and get a green screen that file transfered.
But here end the manual and since i did it the tablet can start but screen is black so its like a tv you see the screen get power but everything stay black so i need first help to get the tablet back running or better the screen back running.
Becasue the tablet and screen runs if you hit any app on screen it starts but you dont see anything self not the app the screen is black totaly from start until its bootet black and stay black you can only turn device off by use the reset button so lucky ht if you touch a application.
Maybe someone have a reset combination or something a rom and manual how to reset the tablet.
i am not sure if allowed to send a link but i will try i bought this item
ok links not allowed for me now so lets see if someone can help me atm