[GUIDE] Download ANY firmware customization from Sony & create an FTF with Flashtool
Part A: changing your customization number to download a different firmware customization (optional)
Requirements:
Rooted Xperia with locked bootloader:
- ROOT with Framaroot or anything and make sure busybox is installed.
Build Prop Editor
The customization number of the firmware you want to download (see list)
Start BuildProp Editor.
When a Superuser request pops up, tap 'Grant' or 'Allow'.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At the first start, a backup of 'build.prop' will be created automatically, which can be restored in case of any problems.
Scroll down to 'ro.semc.version.cust' and tap it.
Change the value to the customization number of the firmware you want to download.
When asked to reboot, tap 'No'.
Tap 'ro.semc.version.cus_revision' and change the value to 'R1A'.
When asked to reboot, tap 'Yes'.
Part B: downloading firmware with Sony PC Companion
Requirements:
Sony PC Companion
Xperia smartphone with locked bootloader
Delete this folder if it already exists:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Sony Ericsson\Update Engine\db
- Windows Vista/7/8: C:\ProgramData\Sony Ericsson\Update Engine\db
Start Sony PC Companion.
Case A: new software version available
Click 'Update'.
If you only want to download the firmware without updating, disconnect your phone now. Click 'Accept'.
If you disconnected your phone, this window will appear, which you may close. Otherwise your phone software will be updated.
Case B: no new software version available
Click 'Your Phone / Tablet is up to date'.
Click 'repair my phone / tablet'.
Repairing your phone will delete your personal data and settings. If you only want to download the firmware without repairing, disconnect your phone now. Click 'Next'.
Click 'Continue'.
Tick the checkbox and click 'Next'.
If you disconnected your phone, this window will appear, which you may close. Otherwise your phone software will be repaired and your personal data will be lost.
Part C: creating an FTF file with Flashtool
Requirements:
Flashtool
Firmware files from Sony PC Companion or Sony Update Service (see part B).
Start Flashtool or Flashtool64 (for 64-bit Windows).
Click 'Tools' > 'SEUS Decrypt'.
Select the 'Source Folder' (copy-pasting this path will not work):
- Sony PC Companion (Windows XP): C:\Documents and Settings\All Users\Application Data\Sony Ericsson\Update Engine\db\13740270\blob_fs
- Sony PC Companion (Windows Vista/7/8): C:\ProgramData\Sony Ericsson\Update Engine\db\13740270\blob_fs
- Sony Update Service (32-bit Windows): C:\Program Files\Sony Mobile\Update Service\db\13740270\blob_fs
- Sony Update Service (64-bit Windows): C:\Program Files (x86)\Sony Mobile\Update Service\db\13740270\blob_fs
Move all 'Available files' to 'Files to convert' by selecting them and clicking the right arrow button.
Click 'Convert'.
Enter the following details:
- Device: your phone model, e.g. 'C6602' or 'C6603' for Xperia Z (see 'Settings' > 'About phone' > 'Model number').
- Branding: can be found in the first columns of these tables by looking up the customization number, e.g. 'Generic US'.
- Version: the build number of the firmware, e.g. '10.1.1.A.1.307'.
Move all files from 'folder list' to 'Firmware content' except 'simlock.ta' and 'preset1.ta' by selecting them and clicking the right arrow button.
Click 'Create'.
When you see 'Bundle creation finished', your FTF will be in 'C:\Flashtool\firmwares'. If your combination of device/branding/build is not yet available on xda-developers forum, please be so kind to share it (see part D).
To save about 2 GB of disk space, delete this folder:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Sony Ericsson\Update Engine\db
- Windows Vista/7/8: C:\ProgramData\Sony Ericsson\Update Engine\db
Part D: sharing your FTF on xda-developers forum
Upload your FTF to a file host. I use Dev-Host for this purpose, but it only supports files up to 512 MB, so I use WinRAR to pack my FTF with the following options: 'Compression method' = 'store' (since FTF is already compressed), 'Split to volumes, size' = '512 MB'. Of course you can use a different file host and archiver if required. Please note that Google Drive, Dropbox and Box all have bandwidth quotas, so your shared files may be disabled if they are downloaded too much.
Create a new thread on xda-developers forum in 'Xperia L General' and include at least the following information:
- Device
- Build number
- Android version
- Customization version
- Region
- Branding
- Download links
Here is an example: [STOCK ROM][FTF] Xperia L (C2105) 15.0.A.1.36 PT. TELETAMA ARTHA MANDIRI (Indonesia)
Thanks to :
@Apollo89
If this post was helpful, don't forget to click the 'Thanks' button.
PC Companion
Will it effect the phone after changing the customization number and updating it?
I cant download firmware.... :/ it saysc companion:error 1601
Sent from my C2105 using XDA Premium 4 mobile app
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
sandorjuraszik said:
I cant download firmware.... :/ it says pc companion:error 1601
Sent from my C2105 using XDA Premium 4 mobile app
Sent from my C2105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ftf on c2105 4.2.2
if i am going to create an ftf for fw 15.A.3.0.26 for c2105, then what to not include in firmware content? i make an ftf excluded the bootdelivery.html, did i do it correctly or.. not? but i manage to flash it anyway, but i still curious..
#Edit : solved
Related
Micromax Funbook-How to's, ROM's Scripts
Here are the drivers and tools you almost certainly need.
http://www.mediafire.com/?t6369ab0ta6x36q --- ADB Drivers
http://www.mediafire.com/?7yh4iaorj01n3d7--LiveSuit-FlashTool
http://www.mediafire.com/?qjxyjz0a86af674-- 2.3.4 ROM
http://www.mediafire.com/?2b2t0mybds03s-- Chinese OEM Ployer MOMO9 ROM 4.0.3
http://www.mediafire.com/?k9n1o5avmy6m6-- Qware ROM 4.0.3
http://www.mediafire.com/?fp2apmx4p2x72di-- Custom ROM by FezzFest
http://www.virtual-productions.nl/QwarePro3/Bootanimations/Pip-boy%203000/ICS/bootanimation.zip-- Fallout Bootanimation
http://www.mediafire.com/?ro9jikqsqdx3i2o -- SCRIPT to install CWM and Gain ROOT.
http://forum.xda-developers.com/showthread.php?t=1378594-- Unofficial CyanogenMod- NOT TESTED
Instructions to use Livesuit--
Firmware upgrade by tool:
Android upgrade process will be formatted with built-in flash memory, if necessary, please backup the data at first.
I. The use of specialized PC terminal upgrade tool
The upgrade file includes: 97F1-D1-H2-H01-N410.20111210.img; the upgrade process is as follows: (in the Windows XP system upgrade for example)
1: Download and unpack the upgrade tool.
2: Download and unpack the upgrade file.
3: To run the upgrade tool in the PC terminal such as LiveSuit.exe [if it is prompted there is need to install the driver, please install FWDN directory driver]. As shown below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. According to user ‘s guide of the LiveSuit, click "select the firmware upgrade file" and added upgrade file “97F1-D1-H2-H01-N410.20111210.img”.to the firmware list,shown as below red area:
5.Turn off the MID first，and press the return key of MID, using USB wire to connect the PC terminal and the MID and then press POWER button ten times; at this point, PC side LiveSuit.exe applications will appear the following interface:
Remark: For first time upgrade, you need to install driver manually, as the
Click on “yes” again will appear the following interface
6. When the upgrade is finished 100% will appear the following interface
Click the OK button, the upgrade is completed, the system will automatically restart.
NOTE: Pug out the USB cable, and the turn on the machine, when machine into the system within one minute, it is best not to operate the machine,because the first time start need to loading some backstage program.
For first time upgrade, you need to install driver manually
I am not responsible for any damage-- HIT THANKS IF I HELPED YOU
Which ROM should i use? ? I flashed using the Qware one, 97F1-D1-H2-H01-N413.20120314* ROM by Eyeoncomputers.
What difference will it make if i use the one by Fezz Fest.
A direct link to the fezzfast Rom?
akhilkapila said:
A direct link to the fezzfast Rom?
Click to expand...
Click to collapse
No I dont think so
Everyone is requested to shift to androidforums.com
There is a separate forum for Funbook there
Here is the link to forum
Funbook
@varunmehra
you did a preety good job in finding these stuffs
cna spmeone give the details of these rom ...nd liknwhere did find it ... and are their any other custom rpms for funbook ?
varunmehra5 said:
Micromax Funbook-How to's, ROM's Scripts
Here are the drivers and tools you almost certainly need.
http://www.mediafire.com/?t6369ab0ta6x36q --- ADB Drivers
http://www.mediafire.com/?7yh4iaorj01n3d7--LiveSuit-FlashTool
http://www.mediafire.com/?qjxyjz0a86af674-- 2.3.4 ROM
http://www.mediafire.com/?2b2t0mybds03s-- Chinese OEM Ployer MOMO9 ROM 4.0.3
http://www.mediafire.com/?k9n1o5avmy6m6-- Qware ROM 4.0.3
http://www.mediafire.com/?fp2apmx4p2x72di-- Custom ROM by FezzFest
http://www.virtual-productions.nl/QwarePro3/Bootanimations/Pip-boy%203000/ICS/bootanimation.zip-- Fallout Bootanimation
http://www.mediafire.com/?ro9jikqsqdx3i2o -- SCRIPT to install CWM and Gain ROOT.
http://forum.xda-developers.com/showthread.php?t=1378594-- Unofficial CyanogenMod- NOT TESTED
Instructions to use Livesuit--
Firmware upgrade by tool:
Android upgrade process will be formatted with built-in flash memory, if necessary, please backup the data at first.
I. The use of specialized PC terminal upgrade tool
The upgrade file includes: 97F1-D1-H2-H01-N410.20111210.img; the upgrade process is as follows: (in the Windows XP system upgrade for example)
1: Download and unpack the upgrade tool.
2: Download and unpack the upgrade file.
3: To run the upgrade tool in the PC terminal such as LiveSuit.exe [if it is prompted there is need to install the driver, please install FWDN directory driver]. As shown below:
4. According to user ‘s guide of the LiveSuit, click "select the firmware upgrade file" and added upgrade file “97F1-D1-H2-H01-N410.20111210.img”.to the firmware list,shown as below red area:
5.Turn off the MID first，and press the return key of MID, using USB wire to connect the PC terminal and the MID and then press POWER button ten times; at this point, PC side LiveSuit.exe applications will appear the following interface:
Remark: For first time upgrade, you need to install driver manually, as the
Click on “yes” again will appear the following interface
6. When the upgrade is finished 100% will appear the following interface
Click the OK button, the upgrade is completed, the system will automatically restart.
NOTE: Pug out the USB cable, and the turn on the machine, when machine into the system within one minute, it is best not to operate the machine,because the first time start need to loading some backstage program.
For first time upgrade, you need to install driver manually
I am not responsible for any damage-- HIT THANKS IF I HELPED YOU
Click to expand...
Click to collapse
hii thanks for tutorial
I installed the rom 2.3.4 but there is different language can u pls
help me
---------- Post added at 01:34 PM ---------- Previous post was at 01:12 PM ----------
saif kazi said:
hii thanks for tutorial
I installed the rom 2.3.4 but there is different language can u pls
help me
Click to expand...
Click to collapse
ok i found out the language problem
it says "image file invalid" please help ....wht is the problem >?
Need help getting G-sensor to work
I had battery issues with my funbook & at the service center they changed my motherboard. i didn't realized to make a backup of the new firmware they provided, hence when i install any custom firmware rom i can not get G-Sensor to work. So i decided to be brave & opened the tablet cover, here i found out that the new mother board is "inet-97f rev03 zgc 2012-06-15" while earlier was of Rev02. i have attached a picture below too ..
Can some one help me how can i get the G-sensor to work again ?? Please help .... i dont think i have warranty anymore as i opened up the tablet & even i dont have the original software so
This is from the WIKI page "Brick (electronics)"When used in reference to consumer electronics, a "brick" describes an electronic device such as a smart phone, game console, router, or tablet computer that owing to a serious misconfiguration, corrupted firmware or a hardware problem, can no longer function. The term derives from the vaguely cuboid shape of many electronic devices (and their detachable power supplies) and the suggestion that the device can only function as a large, heavy object.
The term can also be used as a verb. For example, "I bricked my MP3 player when I tried to modify its firmware."[1]
In one common sense of the term, "bricking" suggests that the damage, often a misconfiguration of essential on-board software, is so serious as to have rendered the device permanently unusable.
However, another use of the term "bricked" is understood to describe a situation where a device is unable to function even when the device does have potential to be recovered later to a working state. In this sense, the damage may be reversible; it is only during the period that it's unable to function that the device is deemed "bricked". This is often referred to as a "soft brick" whereas an unrecoverable device is a "hard brick".DON'T WORRY, BE PATIENT, YOU CAN FIX YOUR PHONE.
This is common 'cents' worth more than a million dollars
accts said:
My two cents, always install CWM - Backup your ROM, before doing any modding to your phone.
Click to expand...
Click to collapse
For this guide I will define types of RESETS that happen when pressing both the POWER and VOLUME UP buttons.
SOFT RESET = 1 vibration then let go of buttons (hold about 3 seconds); Like hitting REBOOT.
HARD RESET = 3 vibrations then let go (about 10 seconds); Like taking out the battery.*
*USE HARD RESET ONLY IF ALL OTHER TRICKS HAVE FAILED. RECOVERY FROM THIS DEEP LEVEL OF SOFT-BRICK WILL TAKE A LONG TIMEBoth can be used at anytime on a working phone. Most bootloops will also allow resets
First try to use SONY's PC Companion to REPAIR your phone.
However if your bootloader is unlocked this may not work
>>TO GET FLASHTOOL CLICK HERE<<If you need help with setting up & using FLASHTOOL >>CLICK HERE<<
For most of the tricks you will need to have FLASHTOOL ready with a STOCK.ftf file waiting at a specific spot.
For help with finding your phones STOCK.ftf file click here
you will find instructions HERE on how to create your own STOCK firmware ftf file for your specific celluar carrier/region and model XPERIA. Each phone model has a different file for every android version. You will need a working phone to get your specific file, However you can use a GENERIC version that comes on international phones to recover from SOFT-brick
As the various 2012 XPERIA forums get organized, the moderators are trying to set up STOCK FIRMWARE ftf file download threads. As these threads come on line I will add them here. For now I will provide at least one file per phone for recovery.
MAKE SURE YOU USE A STOCK FIRMWARE FOR YOUR MODEL. Using the wrong models file will give you the very SOFT-brick your trying to fix. If your not sure then ask for help.
Links to STOCK FIRMWARES
XPERIA P LT22
XPERIA V LT25
XPERIA S LT26
XPERIA SL LT26ii
XPERIA Acro S LT26W
XPERIA ION LT28
XPERIA TX LT29
XPERIA T LT30
XPERIA TL LT30at
XPERIA TIPO ST21
XPERIA TIPO DUAL ST21_2
XPERIA MIRO ST23
XPERIA U ST25
XPERIA J ST26
XPERIA GO ST27
XPERIA Sola MT27
Special THANKS go to the following XDA members for providing and maintaining links for the STOCK.ftf files above. Please click their THANKS button from here if you download.
Spectre51
championswimmer
Jozinek
hhlong89
gregbradley
zhuhang
irontech
Deadmask
Click here to find out how to ready FLASHTOOL
DO NOT CONNTECT YOUR PHONE
First you need to have FLASHTOOL installed from HERE.
Now run FLASHTOOL.
From FLASHTOOL home, select the flash/lightning bolt button
Select FLASH MODE
Select your stock firmware file
WIPE: everything
If available EXCLUDE: TA. (this option is not available for all stock.ftf files, if it's there just exclude it)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now click START button
After FLASHTOOL prepares files, you should get this screen (or similar depending on version of FLASHTOOL)
>>>>>STOP<<<<< FLASHTOOL is now ready for TRICKS
Due to the amount and length of TRICKS, I have provided links to their postTRICK: FOR PHONE THAT WONT RESPOND; VIEW THIS POST FOR TRICK; Confirmed working on ION
TRICK: FOR PHONE THAT WONT RESPOND; VIEW THIS POST FOR TRICK; Confirmed ION
These TRICKS require FASTBOOT access on the phone
TRICK: FOR UNLOCKED BOOTLOADERS; VIEW THIS POST FOR TRICK; Confirmed ION
TRICK: IF YOU TRIED A HARD RESET (3 vibrations); VIEW THIS POST FOR TRICK
TRICK: TO USE FASTBOOT TO ACCESS FLASHMODE; VIEW THIS POST FOR TRICK; Comfirmed S
TRICK: USE FASTBOOT TO FLASH KERNEL; VIEW THIS POST FOR TRICK; Confirmed ION
Please give feedback if any of these work and on what devices, I will update.
If you think I should add something new, either post it or PM me the content to add. Thanks to all those who help.
Thanks
Sent from my ST21i2 using Tapatalk HD
Perhaps add Sony Update Service?
Sent by magic!
Guide , How To Root Sony Xperia J Build Number : 11.0.A.3.28 .. Using Root_with_Restore_by_Bin4ry_v18
for newbie , like me..
(tested at Windows 7 OS)
:good:
"PLEASE READ"
All CREDIT and "thanks button" to all XDA Developer who already tested , and make this tool cool
Original Thread
http://forum.xda-developers.com/showthread.php?t=1886460
Download "Root_with_Restore_by_Bin4ry_v18" there
GO there and push THANKS button or SUPPORT THEM by "buy them a beer"
:good:
please watch the video there , its really helpfull
http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
Question : ARE WE NEED TO UNLOCKED BOTLOADER FIRST FOR ROOTING??
Answer : NO ..NOPE , NO NEED .. PLEASE READ THE ORIGINAL THREAD
Condition :
*Latest "JAVA" installed (search at website and download)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Latest android sdk installed (search at website and download)
(just make sure to install this packages, at Tools = SDK tools , SDK platform tools , at extra = Google adb USB)
* Build Number : 11.0.A.3.28
*Administrator User on your own PC/Laptop
*Devices battery 70% +
Lets begin How To Root ..
1.Make sure all Condition point above are ready..
2.Before plug in your device [ON - MODE]
* go to Setting > Security > Enable (mark) "Unknown Source" allow installation non maket apps
* go to Setting > Developer > Enable (mark) "USB Debugging" mode
4.Now Plug in your device with USB cable to PC
*make sure "NOT" run as "sony companion app"
5.Paste your "Root_with_Restore_by_Bin4ry_v18".zip/rar to [ Local Disk (D ]
*you can paste it anywhere of course ( but just do it my way so your not getting lost xD )
6.Extrack it
* you got 3 file = runme.bat , runme.sh , sdfy.bat , 1 Folder = stuff
7.Make sure all of them in one folder , put that 3 file+1folder to one new folder together [folder name "SU],
* let just make folder named "SU" (easy to remember , and youll not lost the guide)
8. Go to windows "start" button , find " RUN" (or simply push "windows button + R" )
9. Type "cmd" and click ok (to run command promp administrator mode)
10. now on command promp (if you follow my instruction above , that means , SU folder at local disk D
Type : D: ( it will be C:\user\"your username\D: ) *press enter*
Type : cd D:\SU (it will be D:\>cd D:\SU )
Type : dir (it will be D:\SU>dir ) (all list file of SU folder will be show up)
Type : stuff\adb devices (D:\SU>stuff\adb devices) (it will show your device number)
*NOTE : if your device name not show up , that means all "condition" above are not ready, check your java , or android sdk , or usb cable.
*DONT PROCEED TO NEXT STEP IF YOUR NOT FIND YOUR DEVICE NUMBER*
11.if you can see ur device name , now you can proceed :
Type : dir (it will be D:\SU>dir ) (all list file of SU folder will be show up)
Type : runme (it will be D:\SU>runme ) (now you go to bin4ry script selection , make sure you read it)
11. Type : 1 (make sure you read it ) *press enter*
12. Read the script ... Choose " Restore my data "
13. Make sure you read what script "said" again
14.Couple restart , and you got ur Sony Xperia J Rooted , check "superuser" icon inside your devices
im not good at english , so if some step not "readable" please tell me..
and yes i already tested it on my own devices..
but anything bad happen to your smartphone its your own responsible..
:good:
All CREDIT and "thanks button" to all XDA Developer who already tested , and make this tool cool
Original Thread
http://forum.xda-developers.com/showthread.php?t=1886460
Download "Root_with_Restore_by_Bin4ry_v18" there
GO there and push THANKS button or SUPPORT THEM by "buy them a beer"
:good:
----------------------------------------------------------------------------------------------------------------
Updated , working for all build number
Code:
2nd Easy Guide
download unlockroot free app here
www.unlockroot.com
install to your computer
run the program
connect ur xperia j
choose "unlock root" on program option
when notification devices pop up
follow the instruction
rebooted
check SuperSU icon on devices
update it from play store
open SuperSU
Update binary
done
Guide How To Root Sony Xperia J for newbie :highfive:
What if my build number is 11.0.A.7.5???
Sent from my ST26i using xda app-developers app
zzizikri said:
What if my build number is 11.0.A.7.5???
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
Check this thread..
http://forum.xda-developers.com/showthread.php?t=2076839
or
http://forum.xda-developers.com/showthread.php?t=2071817
Sent from my ST26i using xda app-developers app
does bootloader needs to be unlocked before rooting?
Abhishek9291 said:
does bootloader needs to be unlocked before rooting?
Click to expand...
Click to collapse
No
Sent from my ST27i
Sony xperia J ST26i Display problem
Hello
i bought a new sony xperia J ST26i. On the second day i did factory data reset through settings.After the completion of reset the display became blank resulted in white screen. Again i restarted the mobile.but again the display became blank.Still the phone is working like touch,sound,incoming call,etc except display .But some times the display is working properly So please advice what may be the reason and please help in getting the solution.
daivinod said:
Hello
i bought a new sony xperia J ST26i. On the second day i did factory data reset through settings.After the completion of reset the display became blank resulted in white screen. Again i restarted the mobile.but again the display became blank.Still the phone is working like touch,sound,incoming call,etc except display .But some times the display is working properly So please advice what may be the reason and please help in getting the solution.
Click to expand...
Click to collapse
did u try to factory reset again? xD
since i do alot factory reset , its fine on me ...
well if dont have other option to recovery it , try to Visit this thread
http://forum.xda-developers.com/showthread.php?t=1849170
remember read all Condition
it's possible to decode simlock xperia J ? to used on other gsm networks ?
thanks
aoprea said:
it's possible to decode simlock xperia J ? to used on other gsm networks ?
thanks
Click to expand...
Click to collapse
learn to flash your fimware first using flash tool ,,
check here , theres a related thread / guide how to flash your fimware..
http://forum.xda-developers.com/showthread.php?t=1849170
when u know how to flash your firmware , on flash mode "check" the "exclude .ta" .. maybe it "might" work xD
or try to google first if ur not so sure
*do it by ur own risk*
Can ya make one for Xperia J jelly bean plz?
How my 11.2.A.0.21
Sent from my ST26i using xda app-developers app
will it work for build no 11.2.A.0.31????
A little advice for op
Since this guide is for newbies, you should mention in the op that doomlord's script works for all build numbers and unlock root works only for ics
@up use doomlord's script
Hello to all
anyone tried to convert the pc companion files to FTF using flash tools for future installation?
I'm trying to follow this guide:
http://www.xperiablog.net/2014/08/1...re-files-using-xperifirm-and-flashtool-guide/
I have the update files from pcc:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I go to Tools > Bundles > FILESET Decrypt and select the files, then press convert!
However flash tools just stuck on decryption forever
how much time does it take to create a FTF file?
I have the same problem but I'm lazy to search for a solution, try the official thread http://forum.xda-developers.com/showthread.php?t=920746
Have you tried to just download directly from the X1 icon, then select the one you want. then download it and right at the completion of the download it will automatically create the FTF file which you can just flash, from the flash menu. This was what I did with no issues, although I must say it took a real long time at the system phase with the progress bar all way across
gm007 said:
I have the same problem but I'm lazy to search for a solution, try the official thread http://forum.xda-developers.com/showthread.php?t=920746
Click to expand...
Click to collapse
it seems flash tool only works with xperiafirm files!
danw_oz said:
Have you tried to just download directly from the X1 icon, then select the one you want. then download it and right at the completion of the download it will automatically create the FTF file which you can just flash, from the flash menu. This was what I did with no issues, although I must say it took a real long time at the system phase with the progress bar all way across
Click to expand...
Click to collapse
It sounds that flash tool only works with xperiafirm files!
Well, I didn't tried that because I'm on a limited data traffic plan here and I don't want to re-download 2.36 GB
Daniel_GB said:
Hello to all
anyone tried to convert the pc companion files to FTF using flash tools for future installation?
I'm trying to follow this guide:
http://www.xperiablog.net/2014/08/1...re-files-using-xperifirm-and-flashtool-guide/
I have the update files from pcc:
I go to Tools > Bundles > FILESET Decrypt and select the files, then press convert!
However flash tools just stuck on decryption forever
how much time does it take to create a FTF file?
Click to expand...
Click to collapse
hello, you can extract with 7zip (like / or winrar) , put all files in a folder and after use flashtool to create a tft file (tools -> bunddles -> create -> select folder with all files extracted complete phone model and etc and hit create) and flash with flashtool after is finish and voila
cosmy032 said:
hello, you can extract with 7zip (like / or winrar) , put all files in a folder and after use flashtool to create a tft file (tools -> bunddles -> create -> select folder with all files extracted complete phone model and etc and hit create) and flash with flashtool after is finish and voila
Click to expand...
Click to collapse
I have tried that, it worked and I have successfully created a ftf file!
However, I haven't tested it yet as my device is working fine for now....
Daniel_GB said:
I have tried that, it worked and I have successfully created a ftf file!
However, I haven't tested it yet as my device is working fine for now....
Click to expand...
Click to collapse
I tried.but is waste of time..nothing special it's 99,9% same like 5.1.. Sony don't change design or colors or..something big..it's bull****.. Sorry for my English
Hello Guys..
Now I'm Trying To Flash Usa Firmware downloaded by IDM and Merged by XperiFirm now i have the ftf file after trying to flash it with flash tool i'm keep getting error
26/041/2018 12:41:13 - ERROR - No flash script found. Flash script is mandatory
here's screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and cant find any solve to this problem if some one can help me please
First update your Flastool to version 0.9.24.2 if you didn't.
If it doesn't help try this. Go to
Computer or This PC --> Local disc --> Users --> your user name --> .flashTool
In devices find folder G81XX and copy this folder to mydevices. After that open mydevices --> G81XX and find file endind with .fsc (in my case 47.1.fsc) and rename it with name of your firmware (in my case I renamed it to F8142_47.1.A.12.34.fsc). You must have internet connection connected all time.
tomo100brt said:
First update your Flastool to version 0.9.24.2 if you didn't.
If it doesn't help try this. Go to
Computer or This PC --> Local disc --> Users --> your user name --> .flashTool
In devices find folder G81XX and copy this folder to mydevices. After that open mydevices --> G81XX and find file endind with .fsc (in my case 47.1.fsc) and rename it with name of your firmware (in my case I renamed it to F8142_47.1.A.12.34.fsc). You must have internet connection connected all time.
Click to expand...
Click to collapse
i'm Using Flashtool 0.9.24.2 and i copy the file and rename it and still the same problem i'm trying from 12 ago and still didn't get solve
yeah ive open the 47.1.fsc the final code flash:LTALabel:elabel-G8142-row-row_201707040932515.1_47.1.A.12.34_X-FLASH-LTALABEL-42E5.sin i always edit it to 12.34‘s all name but it stay at Syncing device
tomo100brt said:
First update your Flastool to version 0.9.24.2 if you didn't.
If it doesn't help try this. Go to
Computer or This PC --> Local disc --> Users --> your user name --> .flashTool
In devices find folder G81XX and copy this folder to mydevices. After that open mydevices --> G81XX and find file endind with .fsc (in my case 47.1.fsc) and rename it with name of your firmware (in my case I renamed it to F8142_47.1.A.12.34.fsc). You must have internet connection connected all time.
Click to expand...
Click to collapse
I've the same problem with OP. But I can't find an fsc file in the G81XX folder. There's only a G81XX.properties file. I have resynced the devices but no help.:crying:
I solved my problem just now. In fact Flashtool didn't sync the device data with GitHub, so there's no .fsc file in the G81XX folder. I manually downloaded the G81XX folder from GitHub and added them to mydevices folder, and Flashtool works now.
tomo100brt said:
First update your Flastool to version 0.9.24.2 if you didn't.
If it doesn't help try this. Go to
Computer or This PC --> Local disc --> Users --> your user name --> .flashTool
In devices find folder G81XX and copy this folder to mydevices. After that open mydevices --> G81XX and find file endind with .fsc (in my case 47.1.fsc) and rename it with name of your firmware (in my case I renamed it to F8142_47.1.A.12.34.fsc). You must have internet connection connected all time.
Click to expand...
Click to collapse
This worked for me after days of searching online. Thank you very much.
I have the latest flashtool but still get this issue, why? There is a 47.1.fsc in the devices folder (G81XX), so why does it still not work???