Database Info

[I9003] DEODEXING Method If Every Other Method Fails (Without Busybox)

This Method Is The method Used By Me For deodexing Gingerbread XXKPE .I used This Method Because I was Not able to install BusyBox (ie The cp command didn't Work.so I was not able to copy the deodexed files to phone .So That the phone did not boot,stuck at the booting time).
Use This Method If Every Method For Deodexing Fails.
Steps
1.) flash to new XXKPE gingerbread Rom
2.) Root Your Phone
3.) download xUltimate-v2.2.8 xUltimate-v2.2.8
Note: You can use the already deodexed files by downloading this link Download Deodexed System Files [COMPLETE] then Goto step 11
4.) Unzip xUltimate v2.2, and launch "Main.exe"
5.) If everything goes well xUlt should recognize the phone and make a connection. You now should see a list of options.
6.) Run option 1. After option 1 is done, run option 2.
7.) Now these well take a while. Run option 3.
8.) IMPORTANT: After you have run option 3
9.) Now run option 4, and wait.
10.) Exit xUltimate, and put the phone in USB debugging Mode
11.) Download QtADB_0.8.0_windows_with_libs.zip
QtADB_0.8.0_windows_with_libs.zip
12.) Open It QtADB (left side - Browse to the xultimate folder, Right Side System folder)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
13.) copy all the in the done_app folder to the app folder in the phone side
14.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
15.) copy all the files in done_frame to framework folder in the phone side
16.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
17.) Reboot
Note 1: Rebooting Will take some time .its due to the new caching of files
Note 2: If Copying Get Stuck At somewere ,NO PROBLEM just Recopy The files Until all files are copied

Forget deodoxed process, and thank you brother for This explorer for windows, and I searched a lot for something like this but didn't find any application.
Thanks....
Recycled comment.
Sent from my GT-I9003 using Tapatalk

Changed The Thread
Comments Starts From HERE
Recycling Threads

with this no need of busybox right ... good one thanks

kchdeepak said:
with this no need of busybox right ... good one thanks
Click to expand...
Click to collapse
Busy box is needed. But the busybox needed will be 1.16.2 (which will be installed automatically when you Root with SuperOneClick).this busybox version do not contain cp commands.But still you can Deodex

Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/

bajju123 said:
Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/
Click to expand...
Click to collapse
If you can't deodex the files the you can use the already deodexed files uploaded by Misledz
Download Deodexed System Files [COMPLETE]

checking....

@vivek... *waiting for phone___*
what to do?

xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?

Aaditya2 said:
@vivek... *waiting for phone___*
what to do?
Click to expand...
Click to collapse
Flashed & Rooted ???
remove usb cable & connect again in debugging mode ??
Or it may be error in driver files
install kies or update it

Aaditya2 said:
xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?
Click to expand...
Click to collapse
I think you havent even set up the ADB which is used for develpment & othe management of Android phones
I will provide the link
install the adb and the use Qtadb.exe
How To Set Up ADB/USB Drivers for Android Devices
So most people won’t have to use ADB (Android Debug Bridge) ever, but if you want to learn how or want to get a little more technical with your Android phone, here’s how to get it set up.
I. Setting Up The SDK
1. Download the Latest Android SDK from Google
Android SDK
2. Extract the Android SDK .Zip file to C:\AndroidSDK (this should name the new folder created AndroidSDK in the C directory.
3. On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
4. Plug your phone into your computer via USB cable (it needs to be on). It should say installing drivers if using Windows.
!UPDATE 12.01.09 – If using Windows 7 skip steps 4 and 5 and use this procedure instead.
5. After it installs the drivers, goto the Start menu and type cmd into the search bar (Vista or higher) or click Run then type in cmd (XP) to open the command prompt.
6. Type the following into the command prompt window (hitting enter at the end of every line):
cd\
cd AndroidSDK\tools\
adb devices
browse the C:\AndroidSDK\tools\ as the path whe QtADB asks

up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply

Aaditya2 said:
up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply
Click to expand...
Click to collapse
samsung galaxy SL screen Or the Boot Screen( Glowing SAMSUNG)??

samsung galaxy SL screen

Aaditya2 said:
samsung galaxy SL screen
Click to expand...
Click to collapse
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file

hmmm... ok... thanx... trying dat one!!!!!!!

Thanks dude. Easy method for deodexing

vivekkalady said:
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file
Click to expand...
Click to collapse
dat also not worked.... i want to deodexing with your method... plz help me....

my phone wont reboot. its boot loop i think. what should i do?

[GUIDE] Lenovo P700 Root

IMPORTANT Info (read this before proceeding any further):
- Please back-up your system folder using any file manager (ES or file manager) before doing root. specifically the busybox file.
- Also, do a back-up of all your messages, contacts, call logs and apps using the Backup and restore application.
- Rooting your device will VOID its warranty.
- Download and use these files at your own risk. I will not be held responsible for any damages or failures that might happen to your PC or device.
What you need:
1. S2-4.0-root folder containing the root.exe. Download link* (Download this file and extract to your local drive. In my case I placed it on my drive D :\). By the way, This file was sourced from the MU forum.
2. USB Drivers (with ADB driver) here: Driver link.
3. ADB installed on your machine – see below.
*password <here>
ADB (Android Debug Bridge):
Information here: http://developer.android.com/tools/help/adb.html
1. Make sure that you can connect to your device via ADB before you continue rooting your beloved P700.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Root Proper:
Once you have verified that you can connect to your device using ADB, then follow the steps detailed below.
1. Connect your P700 (powered ON) to your PC using the supplied USB cable.
2. Open command prompt and type “ADB devices”. This should show a set of numbers corresponding to your device (see screenshot on top). If not check ADB topic above.
3. Browse to the location where you placed the S2-4.0 folder. Open it and run P700_ROOTv1.0.exe (WARNING: this action would immediately reboot your device) and follow the instruction on screen.
4. Wait until your device is ready.
5. Hit Enter and your device will reboot again. Follow the on screen instruction and wait until your device is ready.
6. Hit Enter when your device has completely restarted.
7. Now you will be prompted with the following line: uid=0 <root> gid=0<root> (follow the instructions next to it). In my case - id is 0. If not, try again and repeat the procedure as mentioned in the instructions.
8. Hit Enter again and your device will reboot for a third time and you will see the following lines: Remount succeeded….....
9. Once your device is completely restarted, hit Enter and the windowed root dialog will automatically close.
Your device should now be rooted.
Screenshot of sequence above:
How to check if you are rooted
1. Use ADB shell and check that you can run su.
2. Use Root checker (download from Google play store).
3. Use ES file explorer or any file manager to enable Root explorer and mount the system folder. If you don’t have any issue with these steps then your device is already rooted.
ADB shell (rooted)
NOTES:
- The following files will be pushed to your system (Superuser, su , MobileUncle toolbox and RE Chinese).
- Root explorer (Chinese) will be installed on your device. You can opt to remove this app using Titanium backup.
- This process was tested on the current ROW(Rest of the World) build (P700_ROW_S108_120614), so I am not sure if this will work on other available builds out there.
- If you see or experience any issues, you can always do a factory Data reset (root will be preserved).
IMPORTANT Info (again):
- Please back-up your system folder using any file manager (ES or file manager) before doing root. specifically the busybox file.
- Also, do a back-up of all your messages, contacts, call logs and apps using the Backup and restore application.
- Rooting your device will VOID its warranty.
- Download and use these files at your own risk. I will not be held responsible for any damages or failures that might happen to your PC or device.
Acknowledgment:
Mobile Uncle Product forum and to the person who uploaded the Chinese instructions and files. Link to MU forum thread: http://products.mobileuncle.com/thread-128116-1-1.html
Lastly, Please pardon my English as it is not my native language
UPDATE: P700_ROW_S112_120707 firmware OTA release. Check here on how to restore root after the update

worked!

To those requesting for the Lenovo P700 phone codes. Here you go <click here>.

Download pass
EpsilonTheGreat said:
To those requesting for the Lenovo P700 phone codes. Here you go <click here>.
Click to expand...
Click to collapse
Hi, I tried to download the archive for root "S2..." and it asked for a password. Can you provide one for me or could you mirror the archive on another file sharer ?
Thanks

trying to get the etg-s2-4.0-root.zip file but it requires a password. maybe i missed it in the first post - what is it? thanks.

Alex_Hypnose said:
Hi, I tried to download the archive for root "S2..." and it asked for a password. Can you provide one for me or could you mirror the archive on another file sharer ?
Thanks
Click to expand...
Click to collapse
ditch_azeroth said:
trying to get the etg-s2-4.0-root.zip file but it requires a password. maybe i missed it in the first post - what is it? thanks.
Click to expand...
Click to collapse
You can download the password <here>

i shouldve known... nyahahahah. thanks. i appreciate it.

Does anyone know why this phone s not recognized in most parts of the world? I thought XDA dev would have it but even they don't list it in the phones section.!!
A friend is thinking of getting one and he was asking me to see if it was a good phone.

Hi Epsilonthegreat.
Maybe you can assist me:
I have taken the P700_ROW_S113, cooked in some modifications (most importantly I replaced the kernel) flashed it on my Lenovo A750
It looks like it is working well. Which I expected, as the P700 is just the A750 with a different screen, but the screen is in the kernel. Just like the P700i seems to be the A789 with a different screen.
I did so in the hope of getting the ROW "Rest Of World" languages. However, it seems to only contain Vietnamese in addition to English and Chinese.
Do you know if this is normal for the ROW's? Or did I download one that has already been tweaked, not the original?
Thanks

cybermaus said:
Hi Epsilonthegreat.
Maybe you can assist me:
I have taken the P700_ROW_S113, cooked in some modifications (most importantly I replaced the kernel) flashed it on my Lenovo A750
It looks like it is working well. Which I expected, as the P700 is just the A750 with a different screen, but the screen is in the kernel. Just like the P700i seems to be the A789 with a different screen.
I did so in the hope of getting the ROW "Rest Of World" languages. However, it seems to only contain Vietnamese in addition to English and Chinese.
Do you know if this is normal for the ROW's? Or did I download one that has already been tweaked, not the original?
Thanks
Click to expand...
Click to collapse
Hello cybermaus,
Unfortunately the P700 ROW version only have English, Vietnamese and Chinese on it. Maybe due to the reason that P700 ROW was only officially marketed on these areas.
Below is the Language screen shot on my unit.
Regards.

Yes, that is what i have. Thanks.
Its a pity, I had hoped to get a multilang version
But still the exercise was very useful. I now have a ROM as stable as the cleaned up A750, but even more cleaned up and better internationalized.
Anyway, a return gesture to the P700 community: I have written a small review of the Lenovo Security app, which you guys may want to put on your phones, as it works very well on it.

It worked! thanks man!

One-click can apply for P700
I can not root my device : S114_120903
It has some as One-click can apply for P700, thank you.

not connect ADB
I can not connect to my device via ADB :
Anyone can help, thank you

What is "password" ,i didnot see and unable to open it.plz tell me what can i do for password?
Sent from my Lenovo P770 using xda app-developers app

Sv: [GUIDE] Lenovo P700 Root
Will this work for P770?
Skickat från min GT-I9300 via Tapatalk 2

Please try the new SRS rooting methord , it worked on my P700

Sv: [GUIDE] Lenovo P700 Root
sagar_funk said:
Please try the new SRS rooting methord , it worked on my P700
Click to expand...
Click to collapse
So it will work on P770?
Skickat från min GT-I9300 via Tapatalk 2

Hi
What is src send me link.
Sent from my Lenovo P770 using xda app-developers app

[Guide] Flashtool/Fastboot ADB Driver Fix For Windows 8/8.1 ~ By Nero Young ~

Only For Xperia Devices​
Intro :
If you are trying to flash custom Kernal/ROM and getting an error of your device not been detected by your PC running on windows 8 then you will need to install the USB/ADB/Device drivers for your handsets.
This can be done by using following tutorial.
!! UPDATE !!
Date : 20 - April - 2014
Those who are on windows 8.1 and having trouble to install drivers will have to download and install windows 8.1 update from here http://support.microsoft.com/kb/2917929 and once you install that you can follow this guide.
Step 1 :
Suppose you are trying to install custom Kernal on windows 8 and you stuck at this screen and nothing happens even if you connect your device in fastboot mode then its due to missing drivers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2 :
So now lets get started. Press "Start Key/Windows Key + C" or move your cursor to top right corner of the screen to activate the Charm Bar and click on "Settings Button" as shown in following figure.
Step 3 :
Now the setting panel will open. Click "Change PC Settings" from the bottom as shown.
Step 4 :
Now you will have this PC Settings screen.
Now click on General Tab. and scroll down to the bottom to find "Advance Start up Option" as shown below and click on Restart. This is immediate restart so make sure all programs are closed and saved.
Step 5 :
Your PC will reboot into Advance Start Up option. And you will see following screen. Now simply press on "Troubleshoot" option.
Step 6 :
In troubleshoot click on "Advance Options" .
Step 7 :
In advance option select "Start-Up Settings" .
Step 8 :
Now just press restart button in Start-Up settings as shown below. Your system will reboot in Start-Up Option Mode.
Step 9 :
Now after your system is rebooted you will get this following screen. Here to choose options we have to use function keys. Now press "F7" to select "Disable Driver Signature Enforcement" .
Now your PC will boot with Disabled Driver Signature Enforcement and you will be able to install Flashtool/Fastboot drivers.
You can get this drivers from Post #2.

Flashtool/Fastboot Drivers
Installing Flashtool/Flashboot Drivers​
Step 1 :
Download the Flashtool/Fastboot Drivers from this link.
[Xperia Device] Flashtool & Fastboot Drivers.zip
And extract it using winRAR or 7zip software.
Click on "[Xperia Device] Flashtool & Fastboot Drivers.exe".
Step 2 :
Setup will start, Click Next.
Step 3 :
Scroll down in selection panel and tick Fastboot dirvers and flastool drivers and click Next.
Step 4 :
Now pop up drivers installation menu will appear. Click Next to proceed.
A red alert Allow box will appear, simply allow it and install the drivers. Do this until the driver installation finishes.
Finally, check which drivers are succeeded in installation from final screen, it will have green right tick if installation is succeeded.

Thank You Very Much
Nice to see you around btw

@neroyoung
the wuala link is dead, could you please reload ?

irontech said:
@neroyoung
the wuala link is dead, could you please reload ?
Click to expand...
Click to collapse
Link Updated

i didi it ..... tanQ

cant find a word to thank you enough, i am so grateful

I did everything and it didn't work
I'm on windows 8.1

Yap - in win 8.1 RTM - this trick didn't work - still "enumeration failed".

Anyone found a solution for Win 8.1 RTM ?

me to waiting for 8.1 otherwise have to go back to previous version

I need this for Win 8.1

i have revert back to 8. but just now saw a post in xda below. can someone try and post feedback here?
" I think I found a solution, at least for my case with a Rockusb device and windows 8.1:
It seems that there is a usb root hub driver for every usb connected device. after I connect mine and disable driver signature it says device not recognized, so I uninstall the corresponding "USB-Root-Hub" under "USB-Controller" in device manager. my corresponding "USB-Root-Hub" was, for some reason that I don't know, the 3rd one from the bottom. as soon as i deleted it, it recognized the device normally and I can use fastboot again with windows 8.1."
http://forum.xda-developers.com/showpost.php?p=44288852&postcount=24

ok good new guys!!!!!!!!!!!!!!!!!!!!!! i did install 8.1 and tried the method i have posted above. and it did work not the 3rd USB-Root-Hub worked for me but i did uninstall several and even mouse stared not working but then it did work. so i repeat what i did..
first thing after flash 8.1 was i went to disable driver signature . then went into device manage and turn off my phone and connect it. as usual message came "device not recognized," so i did uninstall the Usb controll. u can see triangular mark there. then uninstall USB-Root-Hub. i didn removed several then i install flashtools and then installed drivers inside flashtools. yeahhhhhhhhhh and all works now
try your self guys

I tried the above method.
Phone is connected in flashmode but not in fastboot.
Am I doing something wrong ? Is there any way to flash kernel in flashmode ?

mathewgx said:
I tried the above method.
Phone is connected in flashmode but not in fastboot.
Am I doing something wrong ? Is there any way to flash kernel in flashmode ?
Click to expand...
Click to collapse
u need fastboot to flash kernel. are u sure u installed fastboot drivers??

Yes , I installed flashmode and fastboot drivers , from drivers folder of flashtool directory. But , my phone is only recognized in flashmode , even if I connect it while pressing up volume button ( that is fastboot for xperia ray).

mathewgx said:
Yes , I installed flashmode and fastboot drivers , from drivers folder of flashtool directory. But , my phone is only recognized in flashmode , even if I connect it while pressing up volume button ( that is fastboot for xperia ray).
Click to expand...
Click to collapse
Well i know this is some confusing. anyway my phone is RAY too. after doing above mentioned method mine is working fine. by the way i did it in a fresh install of Win 8.1. and the first thing after install i did it to check if it work or not. so i dont know if u can do the same.
suggest you to try again. if u can post a screen pic of you device manager

When I connect my RAY , is always recognized as flashmode (SEMC flash device at device manager).
But in win 8 , there is a Sony Ericsson seehcri Control Device at device manager when in fastboot. So , I think that is the river i'm missing.

guyss help... i have successfully flashed the mobile.... but when i try to switch it on.. the red led blinks but the mobile doesnt start up... when i put it in charge, green light is on.. i tried powering on while charging still no luck...

[ROOT] Swipe 3d life x74 Tablet [ DEV NO LONGER SUPPORTED ]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The swipe 3d life x74 tablet development thread!!! ( NOW DEV NOT SUPPORTED )
The really old and boring swipe tablet 3D life x74 tablet is no longer boring now as the root has been discovered.
This tab is pre rooted and has all the binary files setup correctly such as su and busy box
To check whether you have the binary files in the system follow this tutorial.
1) Download and install Xplore file manager from google play ( free)
2) open the app and go to system/xbin and check for busybox (maynot be present) and su (Should be Present). If they are present then the files are in corect order or position.
IF THE FILES ARE NOT PRESENT THEN SEE MY SECOND POST ON HOW TO ROOT YOUR SWIPE 3D LIFE TABLET * IF THE FILES ARE PRESENT THEN CONTINUE READING THIS POST
3) Now we know that the files are present, we install superuser app from google play by chainsdd (free)
4) now install root checker from google play (free)
5)Now open Root Checker and click check root. A popup will come and it will ask for root permissions, so click accept and after this the checker will show root is present. Yay now we have root perms.
6)now scroll to the right side screen and check for busybox. After confirmation you will be happy and you can party
AND THUS WE SUCCESSFULLY CHECKED AND INSTALLED ROOT AND SUPERUSER ON SWIPE 3D LIFE TABLET
Drivers for Swipe 3d life Tablet:-
Download Link
1) First unpack the RAR file
2)Now plug in your tablet
NOTE:- First Switch ON the debuging Mode for this to apply
3)When it shows no drivers have been Installed, CLick on it, Open the uninstalled driver settings---> update Driver --> Browse for files on my computer --->Selected the driver folder you unpacked
4)There will be many notifications ( 1 or 2 ) just click yes or accept (whatever )
5) Voila your drivers will be installed accordingly
More to come
pls like if helped

Re: [ROOT] Swipe 3d life x74 Tablet[Developement]
INSTALL SU AND BUSYBOX BINARY FILES ON YOUR SWIPE TAB
ROOT YOUR TABLET :-
A file named ROOTx for Alll the Tabs have been made recently By Me:-
The file is available at my XDA thread :
Click HERE To Download
Click to expand...
Click to collapse
Follow the Onscreen Instructions and Root Your Tablet
Always Check your Root @ Root Checker Pro (or free @ PlayStore Link)
for More Info Pls visit CHainFires Site
Go->
Add BusyBox support :-
Install BUSYBOX application by Stephen (Stericson) on Play store
LINK
Click to expand...
Click to collapse
When the app is installed, Open it and install Busybox (Its a button) (EASY ENOUGH )
Pls press Like if Helped

Recovery mode on your Tablet Device
CWM 6.0.2.8 Has been succesfully ported by me to our unknowingly awesome Tablet
DOWNLOAD LINK :-
http://d-h.st/uZB
Procedure to install :-
1) Copy and paste files of the ZIP file in the INTERNAL SD-Card, Folder CWM
*Note - Name the folder same as given as we need it in the Code
2) connect your tablet
3) Shift + Right click on the window and choose "Open Command Window here"
4) Now type the following code :-
Code:
adb shell
cd /sdcard/CWM
sh install-recovery.sh
sh reboot-recovery.sh
If the last Command doesnt work then dont panic, go to settings -> Backup and Reset -> Recovery Mode
AND CHECK OUT CWM
Hit LIKE For every help

Roms FOR Swipe 3D life tablet
UPDATE :- CWM HAS BEEN PORTED TO OUR DEVICE (THANXX TO ME !!!)
IT WILL BE UPDATE SOON SO DONT THEME YOUR ROMS NOW
++++++OLD UPDATE++++++
As the inbuilt recovery mode is not functional, we shall push and pull system ui and frame work files
TUTORIAL/PROCEDURE :-
*FIRSTLY COPY AND PASTE THESE FILES IN YOUR ADB FOLDER without any folder like this
* files to be available soon
1) First take your tablet and plug it in (Debug Mode On )
2) Open your ADB Files ( link on above post )
3) Shift+Right click on the window and choose "Open Command Window Here
4) Type the following code and hit enter per line given in the following code
5) PLS USE The SAME CASE OF LETTERS as in CAPITAL and SMAILL LETTERS
6) DONT BLAME ME FOR ANY PROBLEM. JUST COMMENT HERE SO THAT IT CAN BE RESOLVED
Code:
adb devices
adb shell
cd /system/app
rm SystemUI.apk
exit
adb shell
cd /system/framework
rm framework-res.apk
exit
adb push SystemUI.apk /system/app
adb push framework-res.apk /system/framework
adb reboot
AFTER REBOOT YOU WILL SEE YOUR NEW BATTERy ICONS AND NEW NOTIFICATIONS ICONS
Thank me for every help

Can any one provide me the build.prop from their tab? ?
Sent from my Xperia Sola

bro can anybody here help with the locked swipe 3d tab after unsuccessful pattern lock attempts? How to enter its stock recovery to factory reset? Tried vol+, vol-, both vol+ and vol- along with power button. But all in vain.

I am sorry everyone but my tab is broken so its in repair, any further dev will be delayed
Sent from my Nexus S using Tapatalk 2

rmivuxgc said:
bro can anybody here help with the locked swipe 3d tab after unsuccessful pattern lock attempts? How to enter its stock recovery to factory reset? Tried vol+, vol-, both vol+ and vol- along with power button. But all in vain.
Click to expand...
Click to collapse
if it is on usb debugging,
then root the tab and do wipe all.
tested with volcano tool

riteshgpt60 said:
if it is on usb debugging,
then root the tab and do wipe all.
tested with volcano tool
Click to expand...
Click to collapse
It will work allright that way, but many havent rooted their tabs
Sent from my Galaxy Nexus using Tapatalk 2

How to root byond b51 help me

Hello sir I want know how to roor my byond b51+ android 2.3.6 I am search in google I cannot find any threads anyone know the procedure please help sir...it's my humble request please consider this problem.....vinoth kannan
Sent from my ST21i
Sent from my ST21i

vinoth3342 said:
Hello sir I want know how to roor my byond b51+ android 2.3.6 I am search in google I cannot find any threads anyone know the procedure please help sir...it's my humble request please consider this problem.....vinoth kannan
Sent from my ST21i
Sent from my ST21i
Click to expand...
Click to collapse
try this mate http://forum.xda-developers.com/showthread.php?t=1044765 i cant promise you that it will root it but it will most likely, download the file from your phone (second post) and install it and hit the root button. enjoy!

Solved.....root your byond b51
IMPORTANT NOTES TO FOLLOW THROUGHOUT THE PROCESS:
"TURN ON" DEBUGGING MODE & KEEP UNKNOWN SOURCES "CHECKED" RIGHT NOW & LEAVE BOTH OF THEM CHECKED FOR LIFETIME.
go to settings > applications > "Check" Unknown sources
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
go to development option below & "check" USB debugging.
.
.
ALL THE APPLICATIONS/SOFTWARES WHICH YOU WILL BE RUNNING ON WINDOWS PLATFORM, WHILE LAUNCHING SETUP USING EXE FILE OR STARTING SOFTWARE AFTER INSTALLATION BY DOUBLE CLICKING SHORTCUT, DO IT BY RIGHT CLICKING ON IT & CLICK "RUN AS ADMINISTRATOR" EVERY TIME. Works on windows 7 x64 as tested by me
these are the exact steps which i followed, if you think some of them are un-necessarily added, then you can skip them (for advance pro users)
STEP 1:
Download following archived files & extract them & keep those extraxted folders on desktop for easy access.
.
http://www.mediafire.com/download.php?c5nf3rlhxmxhu4x
.
http://www.mediafire.com/download.php?2tyg0k2xp3ejgyg
.
http://www.mediafire.com/?o9km8vl287ev24j
STEP 2:
Download & install adb, drivers & fastboot using links given below
1. Run it as administrator
2. Press Y/Yes to install ADB and Fastboot or N/No to skip
3. Press Y/Yes to install Drivers or N/No to skip
4. Continue Driver installation
5. Finished!
.
https://www.dropbox.com/s/vr0dk0tegjefyg3/adb-setup-1.2.exe
.
http://d-h.st/KIP
.
https://docs.google.com/file/d/0B0MKgCbUM0itaTNRYi1rMEdTbjA/edit
STEP 3:
CONNECT PHONE
Make sure phone is prepared for connection as per first note above
serach online for drivers (it will take long time...be patient)
all drivers will get installed
make sure there's atleast a driver installed for each of the hardware....there must not be any device left with no driver at all....triangular yellow mark isnt an issue but just make sure that some driver is installed for each device.
when online search gives up, you will need to click install/update driver manually by pointing to those extracted folders above (i.e. on your Desktop)
you may need to restart system quite a few times during each of the driver installation
DISCONNECT PHONE AT THE END
STEP 4:
Install moborobo PC suite....run setup as administrator
download from here
.
http://www.moborobo.com/products/moborobo.html
.
open it as administrator
CONNECT PHONE....let it install drivers & recognize your phone as "Sprd-B51"
after you make sure that all drivers are installed, disconnect the phone from PC, exit/KILL PC suite completely (from notification area as well)
exit PC suite from phone status bar...stop/KILL PC suite apps in phone & uninstall them.
STEP 5:
download & install (run setup as administrator) Root Master (latest version VRoot_1.7.5.5379_Setup.exe)
Keep SuperSU installed in ur device. download it from play store. dont open it now.
connect phone to PC
Open root master by running it as administrator (else it wont succeed)
.
.
Click button highlighted in red rectangle in pic above (skip this step if device gets recognized automatically as soon as you open root master as happened with me....recognized as "Sprd-B51")
.
.
Follow and click button highlighted in red rectangle-which i am showing in above picture ! your device is now connected to this software & ready to be rooted
Click on root and wait !
.
.
it will automatically reboot your device as shown in pic below after root is successful
.
.
You can see this Chinese superuser in your menu! (icon may differ but in while & light blue color combination only)
.
.
open SuperSU grant permisson like this
.
.
supersu will automatically install su binary (need internet connection)! just grant the permisson and let the supersu uninstall Chinese superuser
.
.
Your device is now rooted
CREDITS TO FOLLOWING THREADS & RESPECTIVE THREAD OWNERS & CONTRIBUTING USERS:
http://forum.xda-developers.com/showthread.php?t=2165554
http://forum.xda-developers.com/showthread.php?t=2241831
http://forum.xda-developers.com/showthread.php?t=2459020
http://forum.xda-developers.com/showpost.php?p=48915118
THIS POST IS COMBINATION OF ALL THE THREADS ABOVE
FOLLOWED THOSE MICROMAX THREADS BECAUSE THOSE DEVICES USES SAME CHIPSET (i.e. SP6820)
PS: you can refer threads above for references. I didnt rooted my device to install custom ROMs, so dont ask me regarding the same, I'm noob in dat case
I rooted to uninstall some of the pre-installed apps to get a bit more free internal memory & to get screenshot feature...That's it

How to backup ROM and OS
Thank you....
I have successfully rooted my byond b51.
now I want to uninstall some preinstalled apps but before I proceed I want to Backup ROM and OS.
Please tell me How to backup the ROM so I can recover my phone to current state and settings if the phone is bricked.
please help me.

RRR7274 said:
Thank you....
I have successfully rooted my byond b51.
now I want to uninstall some preinstalled apps but before I proceed I want to Backup ROM and OS.
Please tell me How to backup the ROM so I can recover my phone to current state and settings if the phone is bricked.
please help me.
Click to expand...
Click to collapse
I'm extremely sorry but I cant help you with backing up ROMs n etc bcz I really dont know anything about the same
you can take help other members, above mentioned threads &/or other threads for reference
imho, if u just want to uninstall apps then link2sd application is enough to manage ur storage. with it u can integrate updated apps into system , make third party to system app & free up space on internal memory.
use uninstall master to uninstall system apps it has a feature to back-up the app being uninstalled, so that in case if u find system getting unstable after uninstalling app, u can restore it
IMPORTANT NOTE
just take decisions on installing system apps cleverly.
if u wanna replace only system app for a specific task then first integrate third party app into system & then uninstall system app after confirming that system is stable (eg. stock android keyboard after uninstalling other two third party system keyboards)
I've already uninstalled many pre-installed apps & also some of system apps replaced by third party apps for lower ram consumption &/or better user experience
also with free up space in ROM, I made some of third party essential apps to system apps to free up internal memory (right now 70MB free)
eg. replaced system launcher with ADW & using android kitkat theme package with it, made both of them system apps so that i dnt need to set the theme every time i restart phone
also replaced stock keyboard with google hindi input keyboard as system app(bcz stock keyboard wasnt accurate to touch responses & with google keyboard, u can type in hindi & marathi)
replaced tiny torchlight with a third party torch app as system app(size just few KBs) bcz i wanted only torch, not additional features.
also now M-indicator, whatsapp, link2sd, app saver, gmail etc are system apps.
tc
have a great day

sir my mobile beyond b51+ keeps restarting again and again can you plz tell me how to fix it or how to open mobile in safe mode.