Hi guys i really need help with this issue
I have a viewsonic 10s that was working on a modded rom for over 4 months , i read up on the vegacomb rom and decided to install it, install went fine , rebooted and rom seamed to work , after switching it off and on the following morning i cant get teh rom to load and more worrying is i now cant get to the recover screen .
the unit is currently stuck ina loop , shows install screen again and then the vengacomb logo but no futher
i have a youtube video showing this but am unable to post it at this time as ii am new to the forum, you can simply search my youtube user gohanni to view please please please help..........
still on going
the issue has been still on going, an after many attemptd to put the original firm ware back on i have discovered that teh usb driver that did work originaly to attempt to put the honey comb image on now shows in device manager as having 2 unknowen devices that appear when i connect the tablet via usb .
cdc serial
shuttle
both of these have esclamation marks, tried to auto update driver to no avail.
guys and girls really need some help
please search user gohanni on youtube for a short video showing the issue
hey guys
still no further any one have an idea what i have done and how to reverse it
????????
hi bit stuck here iv got a xperia ray unlocked bootloader cmw and 4.0.2.a.0.62XYH-MOD-Last custom rom kernel 2.6.32.9-v3 iv been trying to get honeycomb blue circle battery with no luck iv got some zip files but when i try and apply them my status bar dissapears any suggestions would be extremely helpful
Is that the icon with the thin blue circle and the number in the middle?
I am unfamiliar with your rom and kernal but I know a similar battery display is available included in other roms like CM9 and such.
Others have had the issue of a vanishing statusbar depending on the CPU governor they are using? Try changing the governor to ONDEMAND or INTERACTIVE if you have the option.
Good luck
Xperia ray bootloop
first off, i'm a noob.
I rooted my xperia ray (ST18i) yesterday and also installed ClockWorkMod 5+ on my phone, as well as ROM manager
I tried installing ROMs and bootanimations; i always got status 7 error, but that's another story
anyway, i tried installing CM10 on my xperia phone
again i got the "asset failed: status 7" error thing
I backed up and tried to reboot but now i'm stuck in a bootloop and i'm even unable to access CWM :crying:
anyone help please?
Thanks in advance
BarnabasEdubio said:
first off, i'm a noob.
I rooted my xperia ray (ST18i) yesterday and also installed ClockWorkMod 5+ on my phone, as well as ROM manager
I tried installing ROMs and bootanimations; i always got status 7 error, but that's another story
anyway, i tried installing CM10 on my xperia phone
again i got the "asset failed: status 7" error thing
I backed up and tried to reboot but now i'm stuck in a bootloop and i'm even unable to access CWM :crying:
anyone help please?
Thanks in advance
Click to expand...
Click to collapse
Ideally you should have created a separate thread for your query since it does not relate specifically to the topic on this one However,
I have found that the best way with these things is to keep it simple. There are two ways to flash a kernal to your phone depending also on the type of file it is.
For CM roms and kernals you can either follow the instructions provided on the CM website using the CMD window (if you use windows OS) or using flashtool v0.9.10.
Flashtool is much easier since all you do is install it, then install the drivers for your phone that come bundled with the software. After that connect the phone in fastboot mode (Hold the volume up button while connecting the USB cable) and then open the fastboot toolbox. You can flash the boot.img file that comes with all CM roms that way and then reboot the phone.
***Before flashing your phone you must ensure that you had "Developer Options" enabled with "USB Debugging". This allows for Flashtool and other methods to access and flash the phone with no problems***
CM10 boot.img contains CWM boootloader and to enter recovery you toggle the volume buttons while the phone starts up. The LED will change colour and CWM Recovery will show up.
Most if not all this information is available under the Ray development section of the forums here:
http://forum.xda-developers.com/forumdisplay.php?f=1351
Good luck
im using ics v 4/0/3 i have not done any root or install any roms iam running on the official one ..but suddenly from a while the mobile gives me black screen from time to time telling me that :
demigod crash handler kernel panic has occured
please do the following :
1-capture this screen
2-get last_kmsg.txt in /data /dontpanic after reboot
3-send email bsp team manager
if you want to reboot press volume down key
any one knows what is this people?
You 'll probably need to flash stock rom, but first, give more info about your phone model..
Is it an LG, or something?
I 've heard about this happening on LG phones..
I assume that this is the screen you are given (in case that this will help someone give you a solution):
http://img444.imageshack.us/img444/4103/20120503188.jpg
Hi!
Sorry if I post my topic on a wrong category, but I couldn't find the right one. I have now a chinese smartphone iNew i2000
MT6589 Quad Core CPU @1,2 GHz
1 GB RAM
8 GB ROM
5,7" Screen 1280x720
Android 4.2.1 Jelly Bean
Dual SIM support
Tested with 64 GB TF Card
I rooted it to change some informations in the build.prop using the RB editor, like the model, brand...Etc. I only changed model to test, after rebooting it, I have the splash screen, after that the animation and nothing else, only a logo and the system don't want to boot
I tried to flash it by downloading it's ROM and using a software named SP_Flash_Tool_v3.1252.1.104 by following a tutorial found on Youtube (this one http://www.youtube.com/watch?v=cdUdHejJor4) , but it didn't work :'(
Thanks for helping me
try contact with your manufacturer to slove this problem. some of china phone do not have strong and stable official support , i will not root it if it is use mtk 6589
this cpu is powerful enough to play game , but most of android application was developer by Qualcom Samsung TI cpu
timgreen123 said:
try contact with your manufacturer to slove this problem. some of china phone do not have strong and stable official support , i will not root it if it is use mtk 6589
this cpu is powerful enough to play game , but most of android application was developer by Qualcom Samsung TI cpu
Click to expand...
Click to collapse
Thanks
Any other answers?
I have the CXQ N7300 which is the same as the i2000 except I only have 4gb rom.
Try this. First got to the site and get the latest rom http://www.inewphone.com/eng/index.asp
Turn the phone off pull the battery for a 30 secs put battery back in. DO NOT TURN ON
Open the flash tool as administrator
Select the "MT6589_Android_scatter_emmc" file which is located inside the firmware folder you just got from iNew
Then click Download in the flash tool bar and then Connect the phone to the USB.
If all goes well the bar at the bottom will start moving.
You could look here http://www.htcmania.com/showthread.php?t=565998
Hope it goes ok for you.
Hmmm my bad I didn't watch the video as he does the same as me. Try that site I posted.
EDIT= I just thought doing it like the site I posted did not work i.e connect the phone with battery out
then press download then put the battery in. Try that.
deuse said:
I have the CXQ N7300 which is the same as the i2000 except I only have 4gb rom.
Try this. First got to the site and get the latest rom http://www.inewphone.com/eng/index.asp
Turn the phone off pull the battery for a 30 secs put battery back in. DO NOT TURN ON
Open the flash tool as administrator
Select the "MT6589_Android_scatter_emmc" file which is located inside the firmware folder you just got from iNew
Then click Download in the flash tool bar and then Connect the phone to the USB.
If all goes well the bar at the bottom will start moving.
You could look here http://www.htcmania.com/showthread.php?t=565998
Hope it goes ok for you.
Hmmm my bad I didn't watch the video as he does the same as me. Try that site I posted.
EDIT= I just thought doing it like the site I posted did not work i.e connect the phone with battery out
then press download then put the battery in. Try that.
Click to expand...
Click to collapse
Exactly the same method as you Thanks a lot , I resolved it by using a newer version of the flashtool
Now, I have a new trouble, when i try to change the boot animation, it's replaced by a black screen :'(
Mission accomplished, I changed all the rom's infos (build.prop, boot logo and boot animation) and i created a new customized ROM
Thanks for answers and help
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
I have sent you a private message
Where to get firmware to this device? Astar-y3 v11 i search everywhere
rock6963 said:
I have sent you a private message
Click to expand...
Click to collapse
Mine is Astar-y3 v11 10.1 the board is GA10H_V1.1 20141110
I been search for the firmware everywhere without any luck
This rom will works fine for your tablet , http://www.filefactory.com/file/15k...X0233_DBL2855_ESP8089_GSL3675_HD_20150206.rar
Flash (iso) file for Softwinner V11 A33
Hy,
I am looking for flash possibilities, because I deleted settings app from my Softwinner V11 chinese tablet, and it stays at first logo.
Android Build: astar_y3_eng 4.4.2 KVT49L 20150403 test-keys
Vendor: sun8i
SDK version: 19
Thanks in advance
Attila
all winner v11 10.1" tablet
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
akapusy said:
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
Click to expand...
Click to collapse
i'll send a PM with links, asap
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
What about gps ? Tablet : softwinner 717
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
Hey, I got 2 similar tablets for my kids - both are plagued with malware that won't go away on factory resets - du speed booster, du battery meter, 'facebook' popups on bottom right corner (kids don't have FB).....
The tablet seems to be rooted, and there's a recovery already in place.
Could someone kindly give me a malware-free ROM to flash please ? Any maybe indicate how to go about it ?
Basic info should be fine - I've rooted and custom rommed a number of devices....
thanks a bunch!
David
Hi would anyone happen to have the links to this firmware s my astar-y3 10.1 tablets giving me trouble?
Cheers
digitiser dont work now
gewoonrobbie said:
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Click to expand...
Click to collapse
my digitiser does not respond at all
I can see that you have been bombarded.
Sorry that so many people are looking to you for a33 flash files and i am additionally sorry for adding to it. My a33-10ql-v1.1 flash file seems to be the "Bigfoot" of flash files. I cannot, for the life of me, find the file. I have been searching, relenlessly, since December last year. Im not usually one to stack on a full pile but i sure could use the help. If you could bring youself to find the time i would be forever greatful. Thank you, whether you can or cannot. Have a great evening.
A few days ago I rooted my phone, using ADB commands it let me but into bootloader but my phone didn't show the option to boot into recovery. It turned out i had to use another usb-c cable and then it did