hi bit stuck here iv got a xperia ray unlocked bootloader cmw and 4.0.2.a.0.62XYH-MOD-Last custom rom kernel 2.6.32.9-v3 iv been trying to get honeycomb blue circle battery with no luck iv got some zip files but when i try and apply them my status bar dissapears any suggestions would be extremely helpful
Is that the icon with the thin blue circle and the number in the middle?
I am unfamiliar with your rom and kernal but I know a similar battery display is available included in other roms like CM9 and such.
Others have had the issue of a vanishing statusbar depending on the CPU governor they are using? Try changing the governor to ONDEMAND or INTERACTIVE if you have the option.
Good luck
Xperia ray bootloop
first off, i'm a noob.
I rooted my xperia ray (ST18i) yesterday and also installed ClockWorkMod 5+ on my phone, as well as ROM manager
I tried installing ROMs and bootanimations; i always got status 7 error, but that's another story
anyway, i tried installing CM10 on my xperia phone
again i got the "asset failed: status 7" error thing
I backed up and tried to reboot but now i'm stuck in a bootloop and i'm even unable to access CWM :crying:
anyone help please?
Thanks in advance
BarnabasEdubio said:
first off, i'm a noob.
I rooted my xperia ray (ST18i) yesterday and also installed ClockWorkMod 5+ on my phone, as well as ROM manager
I tried installing ROMs and bootanimations; i always got status 7 error, but that's another story
anyway, i tried installing CM10 on my xperia phone
again i got the "asset failed: status 7" error thing
I backed up and tried to reboot but now i'm stuck in a bootloop and i'm even unable to access CWM :crying:
anyone help please?
Thanks in advance
Click to expand...
Click to collapse
Ideally you should have created a separate thread for your query since it does not relate specifically to the topic on this one However,
I have found that the best way with these things is to keep it simple. There are two ways to flash a kernal to your phone depending also on the type of file it is.
For CM roms and kernals you can either follow the instructions provided on the CM website using the CMD window (if you use windows OS) or using flashtool v0.9.10.
Flashtool is much easier since all you do is install it, then install the drivers for your phone that come bundled with the software. After that connect the phone in fastboot mode (Hold the volume up button while connecting the USB cable) and then open the fastboot toolbox. You can flash the boot.img file that comes with all CM roms that way and then reboot the phone.
***Before flashing your phone you must ensure that you had "Developer Options" enabled with "USB Debugging". This allows for Flashtool and other methods to access and flash the phone with no problems***
CM10 boot.img contains CWM boootloader and to enter recovery you toggle the volume buttons while the phone starts up. The LED will change colour and CWM Recovery will show up.
Most if not all this information is available under the Ray development section of the forums here:
http://forum.xda-developers.com/forumdisplay.php?f=1351
Good luck
Related
Hi guys
I tried installing CWM on my rooted xperia j...ran the install.bat file from the unzipped file as mentioned..thing is, when i restarted my phone, it started bootlooping..showing a red led and the battery symbol after the sony logo..tried flashing the kernal again but no luck..any suggestions?
IrvinPinto said:
Hi guys
I tried installing CWM on my rooted xperia j...ran the install.bat file from the unzipped file as mentioned..thing is, when i restarted my phone, it started bootlooping..showing a red led and the battery symbol after the sony logo..tried flashing the kernal again but no luck..any suggestions?
Click to expand...
Click to collapse
More details, please What soft were you running, what kernel were you flashing.
Notice that CWM is only for ICS!
wnerw said:
More details, please What soft were you running, what kernel were you flashing.
Notice that CWM is only for ICS!
Click to expand...
Click to collapse
ok..so i got it now...damn..i cant seem to install a custom ROM now..cant get the device into recovery mode without flashing the kernal..
tried installing ParanoidAndroid custom ROM on my rooted ST26i firmware ver 11.2.A.0.21 but just goes into bootloops once i install the zip file and restart..
i rooted the phone like so....
http://forum.xda-developers.com/showthread.php?t=2183737
cant get the phone into recovery mode
IrvinPinto said:
Hi guys
I tried installing CWM on my rooted xperia j...ran the install.bat file from the unzipped file as mentioned..thing is, when i restarted my phone, it started bootlooping..showing a red led and the battery symbol after the sony logo..tried flashing the kernal again but no luck..any suggestions?
Click to expand...
Click to collapse
Try flashing the stock rom, it worked for me!!!!!!
the same thing hapenned to me too
Okay so I seem to have soft bricked my Xperia J too
Only this time I can't seem to get into Flash mode or Recovery mode!
Holding/Pressing Vol+ doesn't bring up the blue LED and the phone doesn't vibrate at all.
Likewise for Vol+. Nothing happens and the phone remains stuck on the Sony boot logo.
Any idea what I could do? (USB isn't recognised on PC either so I can't connect that way.)
Edit: Okay scratch that, randomly button mashing Volume DOWN seemed to work for me. Only took about 50 or so reboots
Sony`s PC Companion can repair Boot Up problems after CWM install faild
Just watch this video on youtube and follow exactly the description on your PC Companion. Just search for this video on youtube "How to fix a (soft) bricked Sony Xperia Play( any Xperia )EASY METHOD, when stuck on the Sony logo"
Wanted to post the Link but it`s not allowed before posted at last ten contributions - sorry for that (XDA rules!)
This will fix all Xperia Models - it works so easy and pretty fast (about 20 minutes) and after that you have a phone just like brand new from the dealer with the latest software rolled out for your device in your country - sweet
Pls help me S1 fastboot prblm
Jampony said:
Okay so I seem to have soft bricked my Xperia J too
Only this time I can't seem to get into Flash mode or Recovery mode!
Holding/Pressing Vol+ doesn't bring up the blue LED and the phone doesn't vibrate at all.
Likewise for Vol+. Nothing happens and the phone remains stuck on the Sony boot logo.
Any idea what I could do? (USB isn't recognised on PC either so I can't connect that way.)
Edit: Okay scratch that, randomly button mashing Volume DOWN seemed to work for me. Only took about 50 or so reboots
Click to expand...
Click to collapse
My phone is not detected due to the driver problem !
Cannot get into fastboot mode !
I use Windows 7 32bit ..... the s1fastboot driver is not getting installed correctly !!
Why bother with Fastboot mode, use flashmode or SEUS to Repair ur phone....
Hi everyone, I've got a Sony d2305. I've got also a problem: I flashed the incorrect rom on this device and, after the boot, I began seeing a black and yellow screen with a red warning saying "Mismatch!!" and below: Model [eagle_lte] and Software[eagle_ss]. I'm keeping seeing even now that I flashed the correct rom over it. The weird thing is that sometimes if I turn my phone in landscape mode when this warning is showing you can see the normal working Android below it! So I'm here to ask if there's a way (Cwm, flashtool or other tools) to completely delete all the stuff I've in my phone and then put again my CWM and from there install zips of roms. Thank you for answering
-a desperate noob :crying:
Use flashtools and install correct ftf for your phone model. Everything should be fixed after that.
Dear Friends,
I am Arindom Samajdar from India. Though I did not have any theoretical learning over android programming, I got a lot of helps & knowledge from XDA Threads on this specially on rooting of android phones. And truly speaking from following the guides of this forum I really rotted my Xperia SP (C5302) successfully about 6 months before and installed CM11 Rom via CWM recovery mode in it.
I was using it flawlessly till 10 days back also. But 10 days before I planned to roll back it to its stock Sony Rom as I was planning to sell it & get a new phone.
But at this time I did not studied mutch & simply started to flash the .tft file of the stock rom which I had prepared long back by the help of Flashtool, when I was rooting my device first. But this time during flashing the file there gone something very wrong and the flashing could not completed over night also & unfortunately during this process battery of my phone drained out & the flashing interrupted. When I checked my phone in morning, I found that it is in switch off condition. When I connected it to charger, first it shows bright green light in its notification light (like it gives while connecting in Flash mode), after 1 or 2 mins it gives Red light with SONY logo in its screen & stayed as it is for another 1 or 2 mins. Then again green light and after some time again red light with SONY logo. And continues this loop. While I tried to switch it on it just vibrate & gives SONY logo on screen, nothing else & after some times goes off.
After several studies over the websites & XDA forums, I understood that there was a error occurred while flashing Kernel. But when I tried to fix it by the methods suggested over the webpages, I got nothing to work for my device as for every process (be it by Flash Tool or by CMD window of windows) the flashing is not being started at all while I am trying to flash the Kernel & after an hour also when I am disconnecting my phone, CMD or Flash tool is showing error of Flash failure & stating it as "Too many Links". I can't understand what this meant to.
My device being connected with PC via Flash Tool both in Flashmode & Fast Boot mode, that means my device is only soft bricked & I am sure that there must be some way to get it back working.
Please help me guys..
Hi, thank you for using XDA Assist. See if this helps, http://forum.xda-developers.com/showthread.php?t=2708815 Also, maybe this, http://forum.xda-developers.com/showthread.php?t=2311964
Hi Friend, Thanks for your reply. But my issue is not with the ftf file. I am having the ftf file. My issue is flashing of the same.
Whenever I am trying to flash the ftf file it does not go beyond "Flashing Data" stage. And when I try to flash only Kernel, it does not starts yet.
Sent from my Nexus 5 using XDA Free mobile app
Thread closed.
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.
Softbricked Xperia Z3 - locked bootloader, disabled USB debugging, no recovery access
Hey, I'm in big need for help in reanimation of my Xperia Z3. I've been trying to install CM 12.1 on rooted Lollipop 5.0.2. In TWRP, after doing a full wipe I've checked ROM on sdcard and started installation. After some time, phone prompted sth like: "there's no root acces, click ok to install SU". Guided by intuition rather than by wisdom I've clicked it, and here started my problems. After reboot phone was stuck on Sony logo screen. So, I've do some research and started to apply solutions one by another.
- After trying to manually access recovery mode, there's only a short flash of green LED and that's all, black screen. Propably there's no more TWRP aboard. Other ways to access it are blocked: I can't use any apk because of softbrick, and can't use ADB commands because USB debugging is disabled after wipe.
- I can access fastboot mode visible for Flashtool; when phone is in this mode, blue LED lights permemently. I've tried to unlock bootloader: program gives message, that there's no possibility of it on my phone. By the way, I would prefer to stay with blocked bootloader. I was trying to flash custom kernel, but there was an error. I don't remember exactly what it was, but it was about lack of permissions, i think that it's also because of USB debugging disabled. The same error shows when I'm trying to flash any other ROM - stock 5.0.2, prerooted 6.0.1 or Paranoid Android.
Most of solutions in similar topics around the web tells to use recovery mode, Flashtool or ADB commands. All af that failed for me and I'm stuck with no ideas what to do next. Now I'm trying to repair or recover stock, unrooted ROM with Xperia Companion, but I'm really afraid of this process because I can't check battery or load it normally while stuck in boot loop. Maybe it will help, then I'll edit or delete this post. I hope you can help me somehow.
Thank you in advance and best regards,
BW
XDA Visitor said:
Softbricked Xperia Z3 - locked bootloader, disabled USB debugging, no recovery access
Hey, I'm in big need for help in reanimation of my Xperia Z3. I've been trying to install CM 12.1 on rooted Lollipop 5.0.2. In TWRP, after doing a full wipe I've checked ROM on sdcard and started installation. After some time, phone prompted sth like: "there's no root acces, click ok to install SU". Guided by intuition rather than by wisdom I've clicked it, and here started my problems. After reboot phone was stuck on Sony logo screen. So, I've do some research and started to apply solutions one by another.
- After trying to manually access recovery mode, there's only a short flash of green LED and that's all, black screen. Propably there's no more TWRP aboard. Other ways to access it are blocked: I can't use any apk because of softbrick, and can't use ADB commands because USB debugging is disabled after wipe.
- I can access fastboot mode visible for Flashtool; when phone is in this mode, blue LED lights permemently. I've tried to unlock bootloader: program gives message, that there's no possibility of it on my phone. By the way, I would prefer to stay with blocked bootloader. I was trying to flash custom kernel, but there was an error. I don't remember exactly what it was, but it was about lack of permissions, i think that it's also because of USB debugging disabled. The same error shows when I'm trying to flash any other ROM - stock 5.0.2, prerooted 6.0.1 or Paranoid Android.
Most of solutions in similar topics around the web tells to use recovery mode, Flashtool or ADB commands. All af that failed for me and I'm stuck with no ideas what to do next. Now I'm trying to repair or recover stock, unrooted ROM with Xperia Companion, but I'm really afraid of this process because I can't check battery or load it normally while stuck in boot loop. Maybe it will help, then I'll edit or delete this post. I hope you can help me somehow.
Thank you in advance and best regards,
BW
Click to expand...
Click to collapse
Hi and welcome to XDA.
Your device has a dedicated forum here:
> Sony Xperia Z3 > Xperia Z3 Q&A, Help & Troubleshooting
All questions regarding your device belong in the forum linked above. You'll need to create an account first so you can post in the main forums.
Good luck