Related
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
problem loading
i downloaded the version micro_sim_s3_quadcore_dualcore_firmware_20130107 and when i try to flash it with sp flash tool i get the error that the phone is mtk6577 and the file is for 6575.Look the photo i have attached and let me know.
Do i do something wrong?
Beer Brand said:
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
Click to expand...
Click to collapse
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Beer Brand said:
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Click to expand...
Click to collapse
Do you mean the one called ''micro_sim_s3_quadcore_dualcore_firmware_20130107'' ?
I tried to flash with sp flash tool but i get error!Not compatible!When it flashes i get error ''the target platform is 6577s00''
I cant load it!
Why do you mean by saying universal?
https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
try this link this goes to all mtk657x chipsets.
Sent from my Nokia 5110 using Tapsilog and Kape
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
soulfreem said:
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
Click to expand...
Click to collapse
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
s3 clone
can this fix my s3 clone mtk6577?
Beer Brand said:
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
Click to expand...
Click to collapse
Is the link the same for the quadcore and dualcore?
Thank you for your help
zeldaaxe1 said:
can this fix my s3 clone mtk6577?
Click to expand...
Click to collapse
i also have issue with my s3 clone mtk6577... its no longer turning on after trying to odex it.. tried to flash the firmware and thats when the phone no longer turning on.. please help me.. im trying to flash it again using the flash tool but stuck in 0% what do i need to do?
I have the same problem. S3 micro sim clone MTK6589, new firmware tried (chinaecarts.com/s3firmware20130320.rar ), then the phone not booting.
I just contacted with Chinaecarts.com, they tried to solve the problem but not working.
Also tried with the universal firmware, but it sad I've MTK6577 phone, not MTK6575.
If I will have fresh news, will post it.
(seller said, I should send the phone back, and they will fix it.)
I tried with this:
H.tps://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
It is theoretically for the MTK6577 and MTK6589 as well. Got the previous result: "Platform error. The target platform is MT6577_S00."
I think there is a solution for the blank screen problem:
- need a Flash Tool. (on the link above you can find it, or on the link in my previous post)
- need a firmware for MTK6577 micro sim card.
I tried with many sdcard firmware versions, but no effective result.
Hi,
1, You need to know what is exact model of your s3 mtk6577. There are many s3 mtk6577 models in the market. Different s3 mtk6577 is made by different manufacturer, so the ROM is definitely different.
2. After you get the right ROM, then flash your phone by using flash tool SPMultiPortFlashDownloadProject
Bricked MTK6577
The image of the S3-micro-sim-version-20121210 this with corronpidos files, and the method that you should have done to retrieve your appliance was using the recover instead of SP tools because the files are not in rar. SP standard my phone so can enter META mode and nothing more.
soulfreem said:
http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
Click to expand...
Click to collapse
It looks I have the exact model of yours. I am trying to update the firmware by entering the recovery (I suppose it is {vol up + power}). But my external sdcard is not mounted to pick the rom from.
I hope this may help you? I had the same problems as you with the same phone after rooting it I deleted the original rom as it went into a loop and would not start so I started installing every firmware I can find and install, I got one which works BUT! no English , it boots English then goes into several languages but not English it is HDCI9300 rom. I googled it as no one seems able or do not want to help although I have asked several times in many different ways. I hope this will get your phone at least to boot up, I used sp flash as this rom will not let you do anything with the sd card (if it does you need to translate one of the languages)? I hope this helps, if not you have lost nothing:fingers-crossed:
Hello. I have a similar problem with yours. A friend of mine has a 100% visual clone (MTK6577) with the same sticker under the battery like in the first post, he tried to flash it, but he messed up something, and then he brought it to me completely DEAD . No charging, no PC connection - nothing... I tried many button combos, and accidentally i found out that if i connect the phone without battery, press and hold VOL+, VOL- & POWER for a few seconds, the PC detected the mediatek com port , installed the drivers without problem, and now the real problems begins - the ROM. I tried all of the roms from chinaecarts but without success, first i couldn't flash the thing, and after downloading several roms from chinaecarts, and finally flashed it and guess what - no LCD :silly: . So i tried combining different files from different roms, and now i'm at a point where i can turn on the phone, screen goes white, but the phone boots, it makes the vibration after the boot process completes, and after that the phone is responding to touches (it vibrates), lock/unlock works, PC detects USB Mass Storage Device, USB Composite Device and MTK65xx Android Phone. I also noticed that in the FW packages i downloaded there are some files that aren't flashed (i think) like for example the kernel.img so i was wondering if i can flash it manually? Please someone help, share some FW links, i can't find anymore...
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
help please!
brad_maliik said:
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
Click to expand...
Click to collapse
Try this (remove spaces): https:// hotfile.com/dl/207667730 /e94a926/6577_9300_650.zip. html
i have a chinese tablet 9.7" with android 4.0.4. i have installed titanium backup it shows status that device is rooted but the prob is that i cant found cwm for my tablet i have tried rom manager also but no luck.
bcause tablet restart after every five to 10 min and very slow also.
here is all details plz give me link to good rom and cwm and all other which i needed.
Name.
Apex IPS pro
MOdel No.
S5
Android Version
4.0.4
Baseband version.
1.4rc3.
kernel version
3.0.8+
[email protected] #2
i have found cwm and install it through teminal emulator and install cyanogen mod 10 after enter in cwm i have wipe/factory reset and install CM10 rom and reboot but after that my chinense tablet wont show any thind just showing balck screen i tried to enter in cwm but nothing will appear i press tha power button lcd suddenly off and again black screen will appear what should i do plz help
Build No.
03F2-P1-H1-H01-AH40-20120708T
plz help
i have found cwm and install it through teminal emulator and install cyanogen mod 10 after enter in cwm i have wipe/factory reset and install CM10 rom and reboot but after that my chinense tablet wont show any thind just showing balck screen i tried to enter in cwm but nothing will appear i press tha power button lcd suddenly off and again black screen will appear what should i do plz help
thanks in advance
Do you want to wipe data?
Try it on setting in the mobile only.
Do you want to wipe dalvik-cache, then do it through rom manager.
Wiping is easy, why do u want to do it through cwm only????
Ur tab doesn't have all hardware support i feel...
It's bricked... If you want to enjoy custom ROMs and kernels, at least get a device that is supported.
display
sanjaykumar.sanjay69 said:
Do you want to wipe data?
Try it on setting in the mobile only.
Do you want to wipe dalvik-cache, then do it through rom manager.
Wiping is easy, why do u want to do it through cwm only????
Ur tab doesn't have all hardware support i feel...
Click to expand...
Click to collapse
it doesnt show display only black screen will appear after i power on or i plug in charger only bright black screen... how to wipe i cant see any thing.
plz help
Lim Wee Huat said:
It's bricked... If you want to enjoy custom ROMs and kernels, at least get a device that is supported.
Click to expand...
Click to collapse
yes you are right sir... i have sony ericsson arc s also it had a problem like this and it stuck on boot loop i found sony updator and update my phone so i want to ask that any tool that update android or to restore my orignal firmware... i have backup my rom with cwm and that is present in sdcard but how can i restore that because tablet doesnt display.
help plz
i have try live suit but it always show yellow exclamation mark when i connect the tablet and i also not find the correct firmware for my tablet .....
its not bricked sir coz i have read in many forums that allwinner a10 chipset is practically unbrickable
what should i do any onew plz help me
looks like your tablet is having Allwinner A10 BOXCHIP CPU.
Do you have the original stock .img ROM( not the cwm backup) ?
if yes then press the power button for about 10-15 secs to switch it off then connect it to PC and try to flash it with livesuit tool.
have you look on needrom.com if have the rom for you ?
nooooooooooooooo
shadab007g said:
looks like your tablet is having Allwinner A10 BOXCHIP CPU.
Do you have the original stock .img ROM( not the cwm backup) ?
if yes then press the power button for about 10-15 secs to switch it off then connect it to PC and try to flash it with livesuit tool.
Click to expand...
Click to collapse
no i dont have stock firmware thats the problem i have find on many sites but no luck manufacturer have a site but there are too many models of named S5 what to do
Souled62 said:
have you look on needrom.com if have the rom for you ?
Click to expand...
Click to collapse
there is no rom for my tab actually i dont know what shoud i type to search the correct rom for my tab i have searced cortex A8 rom and boxchip firmware etc etc, with cortex A8 rom that i have livesuit show always yellow exclamation mark
ubaidbhatti said:
no i dont have stock firmware thats the problem i have find on many sites but no luck manufacturer have a site but there are too many models of named S5 what to do
Click to expand...
Click to collapse
ok.... can you provide me the full info of your tablet?
pm me.... lets talk there.
Try a factory reset or you could simply try a root program and try un rooting it then rooting it back cause my phone was slow after root but I tried again and it worked like a charm (back up before formating)
DoNt FeEd ThE tRoLls !
(PrOhOpEr) <------ I own !
Please thank me it only takes a click or two!
i have flashed wrong rom and my tab dosent show any display then how can i factory reset when i cant see any thing
I am having the same issue, I am trying to revive a Chinese "vigo" 7 in tablet for kicks.
I get the boot screen and when I plug it into my win 7 PC I can see a drive like icon but I cant access it .
Livesuite just complains about nothing needs updating when I try that.
7" 5-Point Capacitive Touch Screen
Boxchip A10 1.2Ghz Cortex A8
Android 4.0 w 4GB Memory and 512MB RAM
Micro SD (Upto 32GB)
HDMI, Headphone Socket, Mini USB
Wireless N w Front Camera
Supports most Video and Audio formats
Li-ion battery 3000mAH
I can get it to the boot and splash screen but thats it, I can see windows is trying to load it but the drivers dont seem to be there but there is no complaint from windows either and nothing in the Device manager.
I have Livesuit here and installed but it cant see the tablet. Windows shows 2 new "drives" when I plug the tablet into my PC but I cant access them.
Any thoughts?
TIA
EDIT : SOLVED :
Many thanks to slot78
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.
Hello!
I think i can help to you! Send me a private message and tonight i will message back with the sollution...just i working now.
kaceps said:
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.
Click to expand...
Click to collapse
I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards
I haven't succeded (yet) but thanks a lot for the info.
I think I got the right point on the motherboard. When I connect it, I can see a white led lightning up near the ubs port on the phone. So, I guess connecting the point makes my phone react.
But I think I might have a driver problem now.
Here is what happened.
Launch Flashtool as admin.
Load a scatterfile (any file, at this point I just want to be able to flash anything.)
Battery in, usb cable connected
press load.
the red progress bar imediately reach 100%
I try to connect he testpoints.
nothing more happens. Sometime I see various errors, not always the same.
Before finding the test point method, I tried all kind of drivers. Now I'm not sure which one is left on the system or wich is the correct one.
Anyway thanks for pointing the test points to me !
Also, thanks for the recovery and the ROM.
But none of them contains a preloader / scatter file. So, at this point, even if I get the right drivers I can't load them. I'll try them later if I manage to revive the phone, but right now my aim is ...
1 / Cleanup the drivers, and reinstall the right one
2 / Get flash tool to load anything on the phone via test point
3 / Find the right preloader and load it via test point
If I manage to do that, then I should be able to put back the back cover, and load the recovery "normally".
In the meantime, any advice is highly welcome.
Like :
- Any tips for cleaning up / installing drivers ?
- Any idea what the right preloader is ?
- Precise order on what to plug when flashig ( Battery / plusg USB / Load in flashtool / Connect points ? )
But more than eveything, thank you ! I might not have succeded yet, but at least I am not stuck anymore. Before your post I didn't know what to do. At least, now I have the test point and I can try something.
Also, sorry for the late answer. I had a lot on my plate, and didn't realise you had answered.
I suscribe to be sure not to miss any more answer.
Skot78 said:
I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards
Click to expand...
Click to collapse
Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards
Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Skot78 said:
Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards
Click to expand...
Click to collapse
kaceps said:
Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Click to expand...
Click to collapse
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot
Skot78 said:
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot
Click to expand...
Click to collapse
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
EDIT ;
YES ! Phone résurected !
What I did :
phone not pluged, test points already connected
Windows -> write memory.
Go to tab Write memory
Open raw data -> select preloader.bin
select EMMC
Adress 0x0000000000
length 0x00600000
Write
Plug phone (with test point already connected)
The prelaoder gets written -> green circle.
unplug phone
After that back to main tab
select scater file from the same image, clic firmware upgrade
connect phone
Loading goes through ...
Green circle,
Phone switch on -> Success !
Thanks a lot, I will now try to flash the CWM recovery and the rom you recommended ... but later.
Right now my phone can boot again, and that's awesome !
kaceps said:
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
Click to expand...
Click to collapse
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...
Lol, you must have answered while I was editing my post.
As I said, Phone resurected ! Success !
It is now booting normally, with a stock rom.
Next steps are
1 / CWM + the rom you suggested.
2 / Fix memory to use the whole memory on one system partition. (It seems the i2000 for some reason does not use all the available memory.)
But all that is not problematic anymore. I just need the time to get to it
Many thanks for your precious help, I wouldn't have been able to do it without you.
Skot78 said:
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...
Click to expand...
Click to collapse
Aswome!
Congratulations!
http://www.4shared.com/mobile/C4f0jQeEce/meteos-mtk6589-rom-edit-8gb-16.html
It's an apk for repartitioning your memory! Use only maximum 1,5 GB system memory options!
After that you must reflash the rom of course and your internal sd will cleared too!
But not the cwm recovery!
I'm happy now!
Get the 2.7 GB of memory on one partition ... OK
Get more available memory ... nope. Not sure it is actually possible on my version.
CWM ... OK
insall the kitkat themed rom you gave ... I don't know.
Skot78 said:
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Click to expand...
Click to collapse
How long exactly ? Because I think the 4 color moving logo has been displayed for 15 minutes now.I know first boot can be long ... but at what point do I decide the phone is not just slow booting but actually stuck ?
Edit : Well, I'll stop at 30min I think.
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.
Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium
kelvinvalencio said:
Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium
Click to expand...
Click to collapse
Well, depends on what you call hardbrick and soft brick.
I bricked it using only software. So, it's soft.
But I had to open it and attach a wire to the motherboard to unbrick it ... so kinda hard to.
kaceps said:
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.
Click to expand...
Click to collapse
Eh it's will be difficult, you know i customized that rom... Because i did not found too. It was not a really rom develpoment just kind a "patchwork"...
The problem is, you have (i think) v2.1 board in your Inew I2000...In Hungary...one company sold v1.1 verzion...it called "Myaudio 508"...
For the v2.1 i have only stock rom...
But i did only few imporvements....Working GPS (with hw modding too) not blurry cam (hw too) different launcher, customized bootanim, different (and less) system ringtones and notifications. Some build.prop tweaking...etc...etc...
I try to make 4.2.2, because i have a working version, but still have two bugs, but that harder bugs and my phone sadly dead.
http://forum.xda-developers.com/showthread.php?p=50010654
My motherboard have a contact issue and i cant find replacement anywhere...I asked chinese factories...i asked russian fans...nothing
I'm a sad panda now...And looking for new phone...There are few new very intresting phones!
But if you want ask anything...just do it! if i can, i will help..
Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?
Japetas said:
Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?
Click to expand...
Click to collapse
You shold check the motherboard version number...Already i know two versions of this phone...The v1.1 and the v2.1...
For the flashtools the firmware names contain "_21" or "_v21"...In previous posts i linked a v21 rom. If you need the older one...i don't have v1.1 rom for flashtools now (because my phone is dead) but you can use the "spot method" and cmw rom + zip firmware form.
Best Regards
Inew I2000 Brikado
Inew I2000 5.7, Mtk6589, 8G. Updated the ROM and correct at all right Flastool plus the smartphone does not turn on and no battery carrega.Vi not the other members had the same problem.
Preciso de ajuda Inew I2000 brickadi
aloizo celso alves cardos said:
inew i2000 5.7, mtk6589, 8g. Updated the rom and correct at all right flastool plus the smartphone does not turn on and no battery carrega.vi not the other members had the same problem.
Click to expand...
Click to collapse
alguem pode me ajudar?
Fiz a atualizacao de rom do inew i2000 5.7 8g com flastool e correu tudo bem, vermelho, rixo, amarelo e verde ok., agora o smart nao liga esta brickado.
Por favor me explique como fazer o metodo de teste da placa mãe, onde tenho que fixar o arame?
Im partition my 8 gb sd card into 6gb 2gb . I want to repartition that is i want to recover my sdcard fully 8gb that is single 8gb . What can i do?? Thanks in advance..
Sent from my GT-S6102 using XDA Free mobile app
HELP OR ASSIST PLEASE , :crying:
My device doesn't startup/boot since
Accidentally deleted some folder and files on Root directory
I try to Charge several times my Battery, also bought a new one.
But it doesn't fix, startup or boot my Device
-
The Reason is : I try to flash some Tweaks , on SuperCharger v6
Expecting for some Better result's on my device , but it only keeps my Battery Drain so fast .
I try to Remove the SuperCharger v6 but accidentally Deleted some Folders
Also i deleted , SuperChargerv6 File .
I didn't intentionally check those folders , i just mistouch and deleted some folder w/ files using Root Explorer on it ,
The folders is on Root directory ,
This is the name of Folder's : ( /dev & /system )
-
i can't be detected on ADB since my Driver is Unspecified
and it only shows " Qualcomm CDMA Technologies MSM "
And it installed or it turns to Human Interface Device "USB Input Device"
What should i do if it doesn't Detect my device when i try to type in adb : adb shell
no devices is showing
This is my device : Starmobile ICON
Specs :
Starmobile Icon Specifications
1.2GHz quad-core Qualcomm Snapdragon MSM8225Q processor
4.5-inch qHD (540x960) IPS capacitive dipslay, 245ppi
Multi-touch with Asahi Dragontrail Glass
350MHz Adreno 203 GPU
Android 4.1.2 (Jelly Bean)
1GB of RAM
4GB of Internal Storage
microSD card slot up 32GB
3G/HSPA (WCDMA 850/2100)
HSDPA 7.2mbps / HSUPA 5.76mbps
GSM 850/900/1800/1900 (Quad-band)
WiFi 802.11 b/g/n / WiFi Hotspot
microUSB v2.0 / Bluetooth
Li-Ion 1,800mAh Battery
Light / Proximity / Gravity Sensor
Iam begging for answer and helps :crying:
Actually this is my first time to post this kind of thread i hope someone could really help me with this
This is my only Phone i keep this a couple of months , but i can't afford to lose this my father will kick my ass and kill me if he will know this phone had this problem
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
Click to expand...
Click to collapse
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
rekz100 said:
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
Click to expand...
Click to collapse
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
timmaaa said:
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
Click to expand...
Click to collapse
By the way tnx again :crying: :crying: :crying: :crying: :crying:
Thread closed, thanks.