Hi,
I have to take my phone back to warranty due to camera problems and I have to get it back to stock.
I have: CID HTC_102
HBOOT: 3.01.000
Android 4.1.1
ROM: ViperC2 3.1.3
Baseband version: 16.22.20.03U_16.11.20.24_M
Build number: 3.19.401.101
The problem is that I cant use the RUU: RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed.exe since this is older that what I currently have.
I can also get the OTA zips fro http://forum.xda-developers.com/showthread.php?t=2200930 but I do not know how to install OTA zip in a way as RUU to get it back to stok.
Please help!
Cheers,
MR
XDA Greetings friends, I have a HTC ONE X AT & T with the following specifications:
Unloket
Avoid PVT Ship S-off rl
CID-11111111
Hboot-1.14.0002
Radio-0.19as.32.09.11.2
openDPS-v29.1.0.45.0622
eMMC-boot.
June 11, 2012, 14:36:28
My question is this:
I can? Place a cooked ROM with android 4.2.2 and Sense 5?, Having HBOOT 1.14? eye now I'm on android 4.0.4 manufactures, I have the SuperCID, Unlocked bootloader, root the phone and installed the TWRP Recovery
Or did I have to apply a RUU (3.18.502.6) to be on HBOOT 2.14??? and so to upgrade to android 4.2.2???
If I apply the RUU'll have to repeat the process bara release the bootloader, root and install the Recovery?
Thanks mates!
excuse my bad English
You can go ahead and install a custom Sense 5 Android 4.2.2 with your current setup. You'll need to install the Beastmode kernel though or you'll suffer signal loss and reboots. The other option is to upgrade to the 2.15 firmware package.
Sent from my Evita
timmaaa said:
You can go ahead and install a custom Sense 5 Android 4.2.2 with your current setup. You'll need to install the Beastmode kernel though or you'll suffer signal loss and reboots. The other option is to upgrade to the 2.15 firmware package.
Sent from my Evita
Click to expand...
Click to collapse
ok I understand correctly, if it does not work for my rom Kernel 4.2.2 Beastmode more, as I get to the 2.15 firmware upgrade package?
Very Grateful for your previous answer : Bueno:
Install the ROM and the Beastmode kernel together and you'll be fine.
Sent from my Evita
Nehomar_C said:
ok I understand correctly, if it does not work for my rom Kernel 4.2.2 Beastmode more, as I get to the 2.15 firmware upgrade package?:
Click to expand...
Click to collapse
When you flash a ROM (with S-off) both the ROM and kernel are replaced, so it doesn't actually matter what ROM and kernel you are coming from.
Sense 5 custom ROMs will install fine on any hboot. But some folks will get signal drops and random reboots. Solution is to either flash Beastmode kernel or flash the 2.15 firmware.
Dear All,
I want to ask, how to update firmware only with S-On and unlocked bootloader possition?
my phone now
ROM: viperS 3.1.4
Firmware: 3.19.401.101 CL157254 release keys
HBOOT 1.29.0000
4XTRecovery v1.0.0.5 RC3
and i want to update firmware to 3.33
thanks.
Updating firmware is not possible with S-ON. You'll need to go for S-off with the wire trick.
rasor99 said:
Updating firmware is not possible with S-ON. You'll need to go for S-off with the wire trick.
Click to expand...
Click to collapse
or using the appropriate ruu.exe which has higher firmware than yours
ENVIR said:
Dear All,
I want to ask, how to update firmware only with S-On and unlocked bootloader possition?
my phone now
ROM: viperS 3.1.4
Firmware: 3.19.401.101 CL157254 release keys
HBOOT 1.29.0000
4XTRecovery v1.0.0.5 RC3
and i want to update firmware to 3.33
thanks.
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=2140870
hi
i need liberty rom install procedure steps to install liberty rom v7a (4.3 Sense 5) for my htc one s. What should i look care
for example
needs;
* kernel xxxx
* firmware xxxx
* hboot vxxx
install prcoedure
* full wipe
* install recovery tool TWRP or CWM
* install zip from sd card
thnx
natmacax said:
hi
i need liberty rom install procedure steps to install liberty rom v7a (4.3 Sense 5) for my htc one s. What should i look care
for example
needs;
* kernel xxxx
* firmware xxxx
* hboot vxxx
install prcoedure
* full wipe
* install recovery tool TWRP or CWM
* install zip from sd card
thnx
Click to expand...
Click to collapse
Needs
- s-off to install radio and firmware
- firmware 2.15
- kernel included in the rom
- hboot ...this is redundant. hboot is the same as firmware
- radio 1.35a. if you don't install this radio you won't have HSPA/HSPA+ mobile data, you will be limited to 3G (UMTS) speeds.
install procedure
- install recovery from OP (or official TWRP 2.7.0.0)
- flash firmware 2.15 (if needed)
- flash radio 1.35a
- full wipe
- flash ROM
Rapier said:
Needs
- s-off to install radio and firmware
- firmware 2.15
- kernel included in the rom
- hboot ...this is redundant. hboot is the same as firmware
- radio 1.35a. if you don't install this radio you won't have HSPA/HSPA+ mobile data, you will be limited to 3G (UMTS) speeds.
install procedure
- install recovery from OP (or official TWRP 2.7.0.0)
- flash firmware 2.15 (if needed)
- flash radio 1.35a
- full wipe
- flash ROM
Click to expand...
Click to collapse
thnx a lot man...
just download zip and sent to sd car then open TWRP install zip form sd card... everythings is fine . thank you
before this rom, i installed the maximus hd rom. that means I've already completed this steps.
im happy now
natmacax said:
thnx a lot man...
just download zip and sent to sd car then open TWRP install zip form sd card... everythings is fine . thank you
before this rom, i installed the maximus hd rom. that means I've already completed this steps.
im happy now
Click to expand...
Click to collapse
If you had MaximusHD check your hboot again. MaximusHD requires 2.16 hboot and most of the ROMs are for 2.15. You might need either to search only for ROMs made for 2.16 (these are fewer) or to downgrade hboot to 2.15 in order to flash majority of the ROMs. Also for hboot 2.16 it is needed a special modded recovery, the official TWRP is not OK
If you want just Liberty, then you have to be sure you choose in Aroma Installer the 2.16 hboot and I think you need to use the same recovery you used for MaximusHD. Sorry but you didn't specified from start that you're on hboot 2.16. I would have told you that in this case you should keep the recovery you used for MaximusHD
89424525
Rapier said:
If you had MaximusHD check your hboot again. MaximusHD requires 2.16 hboot and most of the ROMs are for 2.15. You might need either to search only for ROMs made for 2.16 (these are fewer) or to downgrade hboot to 2.15 in order to flash majority of the ROMs. Also for hboot 2.16 it is needed a special modded recovery, the official TWRP is not OK
If you want just Liberty, then you have to be sure you choose in Aroma Installer the 2.16 hboot and I think you need to use the same recovery you used for MaximusHD. Sorry but you didn't specified from start that you're on hboot 2.16. I would have told you that in this case you should keep the recovery you used for MaximusHD
Click to expand...
Click to collapse
Rapier, thanks for the great information
i check this
***UNLOCKED***
VLE ......... S-OFF RL
Hboot 2.16.000
Radio 1.35a.32.42.27
Aug 16 2013,16:59:47:12963
i installed Liberty Rom S4 v7a via the TWRP v2.6.1.0 above conditions .
i understand right, hboot is need to downgrade 2.15 and re flash liberty
am i right ?
thnx
natmacax said:
Rapier, thanks for the great information
i check this
***UNLOCKED***
VLE ......... S-OFF RL
Hboot 2.16.000
Radio 1.35a.32.42.27
Aug 16 2013,16:59:47:12963
i installed Liberty Rom S4 v7a via the TWRP v2.6.1.0 above conditions .
i understand right, hboot is need to downgrade 2.15 and re flash liberty
am i right ?
thnx
Click to expand...
Click to collapse
I think liberty is dual hboot compatible according to the author, I had installed on hboot 2.16 and it worked fine.
natmacax said:
Rapier, thanks for the great information
i check this
***UNLOCKED***
VLE ......... S-OFF RL
Hboot 2.16.000
Radio 1.35a.32.42.27
Aug 16 2013,16:59:47:12963
i installed Liberty Rom S4 v7a via the TWRP v2.6.1.0 above conditions .
i understand right, hboot is need to downgrade 2.15 and re flash liberty
am i right ?
thnx
Click to expand...
Click to collapse
No, you're fine to go as you are. Liberty is the single ROM as I know, that has in Aroma installer option for 2.15 or 2.16 hboot. So you could use with your current one as well, no need to downgrade. 2.15 will be needed if you want to flash other ROMs, mainly AOSP KitKat ones
Rapier said:
Needs
- s-off to install radio and firmware
- firmware 2.15
- kernel included in the rom
- hboot ...this is redundant. hboot is the same as firmware
- radio 1.35a. if you don't install this radio you won't have HSPA/HSPA+ mobile data, you will be limited to 3G (UMTS) speeds.
install procedure
- install recovery from OP (or official TWRP 2.7.0.0)
- flash firmware 2.15 (if needed)
- flash radio 1.35a
- full wipe
- flash ROM
Click to expand...
Click to collapse
I'm sorry man, i've got a question! I'm S-ON HBOOT 2.15. Before flashing that rom i had CM 10.2. Few days ago i decided to try this one and when aroma started i has so happy. During the installation aroma asked me to install the radio 1.35.... for LTE data connection and i did it....but now i realize why my connection data stay at everytime only on G. Is that the reason?? I am 1.11.50.05.28_10.27.50.08L , is that because i have no any 3G H H+ data connection?? How can i fix it?? Can you please help me??
Yes, this is the reason. Being S-On, you cannot flash radios. Aroma doesn't know that and tries to install but it can't (and doesn't give an error either I think). Based on what you said, you're still on 1.11 radio and you cannot have mobile data speeds higher than UMTS with that radio. You will need 1.35 radio for that.
This is valid for Liberty ROM only. For other ROMs your radio is ok and you could reach higher speeds
As I previously said, only way is to try one of the methods to gain S-Off and then you can flash that radio. There's no other way unfortunately
Sent from nowhere over the air...
Hi,
I would like to Flash CM rom on my HTC one s. it's already rooted and S-Off
HBOOT version 1.06
CID : 11111111
MID : PJ4010000
The problem is that the higher recovery i can flash on it is TWRP 2.6.3, i can't flash a higher version.
And everytime i flash any version of CM it doesn't work.
On CM website they say : The minimum version of recovery that can be used to install CyanogenMod on this device is: ClockworkMod 6.0.4.8 or TWRP 2.7.0.8. See this page for more information.
they also say : The following HBOOT versions are supported by CyanogenMod 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444. Devices with older bootloaders should have their firmware updated before attempting to install CyanogenMod.
So i tried to flash 2.7.0.8 and higher but nothing works.
My intuition is that i should upgrade the firmware to allow the right recovery version but everywhere i read that HBOOT 1.06 is the best and that i should keep it.
So before i make a mistake, could anyone help me on matter.
PS: feel free to ask me for logs or error messages.
My best.