Related
Hey,
I finally decided to root my tablet and flash a custom rom, because the random reboots and freezes are annoying me.
I rooted my Transformer with viperMOD (pretty easy)
But now I want to install Revolver 4. But I don´t know how to do it. There is no ReadMe or an Installation Guide.
Could somebody please give me a little installation guide or a link to one?
I used the search button, but nothing helpful came out
Thanks, Eike
First you need to install a custom recovery like CWM.
Use RecoveryInstaller to do that.
http://forum.xda-developers.com/showthread.php?t=1346180
Download the ROM file and Gapps if needed.
(Just check in Revolver thread to see what is needed)
Put it on the micro sd card (some recovery will see internal sd too)
Boot into recovery by:
Push and hold Vol down + Power button
When you see words at top left corner
Immediately push Vol up within 5 sec.
(or use Transformer Reboot to Recovery app in Play store)
Once in CWM go to Backup/Restore and do a nandroid backup.
Now select wipe and wipe data, cache, dalvik cache.
Select "install zip from sd card and choose your file you want to flash
When done reboot, enjoy.
Thanks Mate, you really saved my day!
In your Signature stands, that you use Megatron Rom on your Transformer.
Is Megatron better than Revolver?
E-I-K-E said:
Thanks Mate, you really saved my day!
In your Signature stands, that you use Megatron Rom on your Transformer.
Is Megatron better than Revolver?
Click to expand...
Click to collapse
I can't say as I have not try ICS Revolver ROM.
Once you flashed your ROM and set it up, do a nandroid backup of it and try different ROMs. If you don't like it nandroid restore back to the ROM you already have set up. Titanium is good for backing up data.
Different between the two is one is Megatron (CM9) is AOSP
and Revolver is base on Asus firmware. Some like AOSP while some like ROM to
be base on the original firmware. Good luck and happy flashing.
I think all of the roms for our tf101 are really good in general, it all boils down to user preference. Be careful with revolver atm as the last release is having some bugs with revolver parts according to what I was reading, gnufabio is a wonderful dev though and should have everything fixed.
As far as roms to try I'd try these four (using the nandroid method as above)
Stock Based (more like tf when you get it):
Revolver
ARHD
Aosp Based (more like pure android, say a galaxy nexus):
Megatron
AOKP
Since I'm a flashaholic I tend to run around between these four, prefering aosp a bit over stock.
Also, it's important to note that if you want to fix rebooting issues and etc you also want to get a custom kernel .zip and flash that after booting the rom once,
I recommend Guevors kernel v20 or v17c (in my sig), or the TestyMehIcs kernel.
To flash kernel:
1. follow steps above to flash rom
2. Boot rom once
3. Boot back into CWM
4. Wipe Dalvik-Cache (I like to wipe several times, mabye I'm just paranoid)
5. Wipe Cache ('')
6. Install from zip the kernel.zip you downloaded.
7. Reboot and enjoy!
I'm rooted and running stock 4.1.1 on Kernel 3.0.31. I would like to flash CM10 and have a couple of questions.
1. If I use Titanium Backup to save all my apps and data, can I restore them after flashing CM10 without any issues?
2. I beleive CM10 comes with it's own kernel, please confirm.
3. If CM10 comes with it's own kernel, is there a better kernel out there or is ibetter to stick with the one with CM10?
4. Should I just flash a stock CM10 nightly and gapps or is there a better custome rom with CM10 built in?
Any help or suggestions would be greatly appreciated!
Thanks ::laugh:
snyperr said:
I'm rooted and running stock 4.1.1 on Kernel 3.0.31. I would like to flash CM10 and have a couple of questions.
1. If I use Titanium Backup to save all my apps and data, can I restore them after flashing CM10 without any issues?
2. I beleive CM10 comes with it's own kernel, please confirm.
3. If CM10 comes with it's own kernel, is there a better kernel out there or is ibetter to stick with the one with CM10?
4. Should I just flash a stock CM10 nightly and gapps or is there a better custome rom with CM10 built in?
Any help or suggestions would be greatly appreciated!
Thanks ::laugh:
Click to expand...
Click to collapse
1. Should work for most apps, if not all apps
2. It does come with a Kernel
3. It's up to you, Matr1x and Air kernel are good alternatives
4. I like Androxide for a CM10 like rom. It's stable enough and has most of the good features
petenatas said:
1. Should work for most apps, if not all apps
2. It does come with a Kernel
3. It's up to you, Matr1x and Air kernel are good alternatives
4. I like Androxide for a CM10 like rom. It's stable enough and has most of the good features
Click to expand...
Click to collapse
Thanks petenatas!
Besides wiping all the caches, do I need to also wipe all data/user info? This will mean on first boot up i would need to re-enter all my user info, right?
snyperr said:
Thanks petenatas!
Besides wiping all the caches, do I need to also wipe all data/user info? This will mean on first boot up i would need to re-enter all my user info, right?
Click to expand...
Click to collapse
If you have CWM, do a data/factory reset before the installation, else CM10 will not boot
Yes, it's a complete re-installation. Your SD card will be safe though
You can also re-install from Play Store in My Apps / All
But if you enter you Google account at start-up and set up your wi-fi, it should re-install all the apps on it's own
petenatas said:
If you have CWM, do a data/factory reset before the installation, else CM10 will not boot
Yes, it's a complete re-installation. Your SD card will be safe though
You can also re-install from Play Store in My Apps / All
But if you enter you Google account at start-up and set up your wi-fi, it should re-install all the apps on it's own
Click to expand...
Click to collapse
Excellent, thanks again for your quick help!
snyperr said:
I'm rooted and running stock 4.1.1 on Kernel 3.0.31. I would like to flash CM10 and have a couple of questions.
1. If I use Titanium Backup to save all my apps and data, can I restore them after flashing CM10 without any issues?
2. I beleive CM10 comes with it's own kernel, please confirm.
3. If CM10 comes with it's own kernel, is there a better kernel out there or is ibetter to stick with the one with CM10?
4. Should I just flash a stock CM10 nightly and gapps or is there a better custome rom with CM10 built in?
Any help or suggestions would be greatly appreciated!
Thanks ::laugh:
Click to expand...
Click to collapse
I use Titanium for the apps I really need the data for. I will stop all updates through the store as soon as I get on a new ROM. Get TB restore apps with essential data. I will often just go through the store for others since I have had a few issues in the past doing everything through TB (lag, not working properly, Force closing).
I often use Matr1x cfs or bfs (CFS is a nice overall scheduler, with nice stability and it is good for a multitasker. BFS is a performance scheduler giving more performance to the currently running app, like a game. So if you aren’t really a multitasker or if you play a lot of games, BFS is a better choice. -- source http://matr1xkernels.com/category/matr1x-kernels/)
Thalamus is very stable, more stockish so there is less extras (BLN, BLD, OC, etc) http://forum.xda-developers.com/showthread.php?t=1651756
Try CM10 but I suggest you try many and decide for yourself. Ebvery phone is different and every user wants/likes different things as thay become "flashaholics" Just remember there is no "best ROM" Everything has some sort of bug.
stempox has an amazing always up to date complation of ROMs and Kernels http://forum.xda-developers.com/showthread.php?t=1721856
Finally clean install:
if you get a cluster f*#@ of problems then clean install. It isn't that hard. Use Titanium Backup and good to go.
In Recovery:
1. wipe data/factory reset (this formats /data, /cache and .android_secure on sd)
2. format /system, /boot
this leaves you with only bootloader, recovery and radio...dalvik-cache resides on /data, so it's gone already.
3. flash rom
4. gapps & custom-kernel (if needed). No need to let the phone boot & settle before flashing them (most custom-kernels have a script that automatically wipes /cache & dalvik during kernel-install)
5. reboot
6. Run TB -- restore missing apps with data --1st option under restore
just updating rom:
1. flash rom-zip
2. wipe /cache and dalvik-cache
3. reboot
Do this before reporting any issues on the thread since the problems are often related to this and not the ROM or kernel.
jayjay3333 said:
I use Titanium for the apps I really need the data for. I will stop all updates through the store as soon as I get on a new ROM. Get TB restore apps with essential data. I will often just go through the store for others since I have had a few issues in the past doing everything through TB (lag, not working properly, Force closing).
I often use Matr1x cfs or bfs (CFS is a nice overall scheduler, with nice stability and it is good for a multitasker. BFS is a performance scheduler giving more performance to the currently running app, like a game. So if you aren’t really a multitasker or if you play a lot of games, BFS is a better choice. -- source http://matr1xkernels.com/category/matr1x-kernels/)
Thalamus is very stable, more stockish so there is less extras (BLN, BLD, OC, etc) http://forum.xda-developers.com/showthread.php?t=1651756
Try CM10 but I suggest you try many and decide for yourself. Ebvery phone is different and every user wants/likes different things as thay become "flashaholics" Just remember there is no "best ROM" Everything has some sort of bug.
stempox has an amazing always up to date complation of ROMs and Kernels http://forum.xda-developers.com/showthread.php?t=1721856
Finally clean install:
if you get a cluster f*#@ of problems then clean install. It isn't that hard. Use Titanium Backup and good to go.
In Recovery:
1. wipe data/factory reset (this formats /data, /cache and .android_secure on sd)
2. format /system, /boot
this leaves you with only bootloader, recovery and radio...dalvik-cache resides on /data, so it's gone already.
3. flash rom
4. gapps & custom-kernel (if needed). No need to let the phone boot & settle before flashing them (most custom-kernels have a script that automatically wipes /cache & dalvik during kernel-install)
5. reboot
6. Run TB -- restore missing apps with data --1st option under restore
just updating rom:
1. flash rom-zip
2. wipe /cache and dalvik-cache
3. reboot
Do this before reporting any issues on the thread since the problems are often related to this and not the ROM or kernel.
Click to expand...
Click to collapse
Wow, thanks jayjay. That's a ton of great info! I know what I'm doing tomorrow night! Cheers!
Hello, I have recently been able to install and make a backup of my SGH-I727 using CWM. I have also purchased Titanium backup and made application backups.
I have a few specific questions that I have not been able to find an answer to :
1) Will a CWM backup contain all the apps that are on the phone as well? Meaning, if I restore with a backup image I made, will the
unit be exactly as it was before the backup (i.e. home pages, apps, etc)?
2) If the answer to #1 is YES, then what is the use of Titanium backup/restore?
3) I saw on a YOUTUBE video a user "teaching" how to use CWM, before the RESTORE, he formatted the /cache, /data and /system partitions, then did the RESTORE. Is this needed? required? recommended? best practice?
4) I have gb 2.3.5 on the device now and it works fantastic. I would like to try ICS but before I go there, I want to make sure I have a way to get back to what I have now. Is a CWM backup all I need?
5) Will installing a stock Kernel (ICS AT&T in my case) get rid of CWM Recovery? Or will it be there when I want to go back to the backed up version?
6) Lastly, and maybe this one should not be in this thread but lets try : I am learning about Android, and I see references to the "modem/radio" files for each device. Will a CWM backup also backup the radio/modem code in case the ICS install does not go as planned?
Thank you!!
I think you need to do more reading. Many of these questions have been answered.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
1. Yes a cwm or twrp b/u will put all your apps back just like you never left.!
2. You use titanium when you flash a new rom because of course the new rom won't contain your apps.
3. I've done lots and lots of restores and never wiped first....but wouldn't hurt i guess.
4.yup.!
5.no the recovery remains untouched.
6.I don't think the radio gets backed up or restored. But it's not critical to the rom operation and can be reflashed when ever..
calderonr said:
Hello, I have recently been able to install and make a backup of my SGH-I727 using CWM. I have also purchased Titanium backup and made application backups.
I have a few specific questions that I have not been able to find an answer to :
1) Will a CWM backup contain all the apps that are on the phone as well? Meaning, if I restore with a backup image I made, will the
unit be exactly as it was before the backup (i.e. home pages, apps, etc)?
2) If the answer to #1 is YES, then what is the use of Titanium backup/restore?
3) I saw on a YOUTUBE video a user "teaching" how to use CWM, before the RESTORE, he formatted the /cache, /data and /system partitions, then did the RESTORE. Is this needed? required? recommended? best practice?
4) I have gb 2.3.5 on the device now and it works fantastic. I would like to try ICS but before I go there, I want to make sure I have a way to get back to what I have now. Is a CWM backup all I need?
5) Will installing a stock Kernel (ICS AT&T in my case) get rid of CWM Recovery? Or will it be there when I want to go back to the backed up version?
6) Lastly, and maybe this one should not be in this thread but lets try : I am learning about Android, and I see references to the "modem/radio" files for each device. Will a CWM backup also backup the radio/modem code in case the ICS install does not go as planned?
Thank you!!
Click to expand...
Click to collapse
1. 99.9% back to what you had
2. if you install a new rom you can use titu to restore your apps and settings, 99.9% of apps should work, but some people like reinstalling thier apps fresh and not from backups
3. i wipe b4 i reinstall from backup, but dont wipe/format your sdcards, thats where all the backups of cwm and titu are, good practice is to backup your sdcards onto your computer, that reminds me, i need todo that
4. yes except for the radio
5. if you mean stock firmware , then yes custom recovery gone, you will get everything back to stock - recovery, kernel, rom, radio. if you mean just the kernel then no
6. no cwm/twrp do not backup or wipe the radio , you will still have what you had b4, but the ics stock firmware install you will get another radio and should be fine, worry about flashing the firmware correctly(do the wipes), radio is easy to flash/reflash with custom recovery(cwm/twrp)
vincom said:
1. 99.9% back to what you had
2. if you install a new rom you can use titu to restore your apps and settings, 99.9% of apps should work, but some people like reinstalling thier apps fresh and not from backups
3. i wipe b4 i reinstall from backup, but dont wipe/format your sdcards, thats where all the backups of cwm and titu are, good practice is to backup your sdcards onto your computer, that reminds me, i need todo that
4. yes except for the radio
5. if you mean stock firmware , then yes custom recovery gone, you will get everything back to stock - recovery, kernel, rom, radio. if you mean just the kernel then no
6. no cwm/twrp do not backup or wipe the radio , you will still have what you had b4, but the ics stock firmware install you will get another radio and should be fine, worry about flashing the firmware correctly(do the wipes), radio is easy to flash/reflash with custom recovery(cwm/twrp)
Click to expand...
Click to collapse
Hi Vincom and all,
Thanks for the responses....Very useful and I think I am putting all the dots together now. Before I ask this let me say that I am a computer programmer as well but for IBM mainframe systems, so I am a technical person but the distributed computing world (Windows/Unix/Linux, etc) is not that familiar to me, therefore these follow up questions.
I am trying to understand the difference between FIRMWARE, and ROMS and Kernels.
1A) I gather firmware is the software that drives the hardware like device drivers..correct?
2A) I also gather that the Kernel is the version of the operating system. Correct?
3A) ROM is the one that is stomping me a bit...is that the UI version? Like Gnome in Linux?
When I look at my S2, in About Phone I see the following :
Baseband Version - I727UCKJ2
Kernel Version - 2.6.35.11
Build Number GINGERBREAD.UCKJ2
4A) Lastly, when I do a CWM backup, what am I backing up? The ROM and the Kernel? Does it also back up the firmware?
Anyway thanks to all for your input and help!...I love my Android device!
Hello there, To answer a few of your questions.
1.A. Typically Firmware is a patch or software update/version that affects what the hardware is supposed to do..Google definition-Permanent software programmed into a read-only memory.
2.A. Kernel - pretty good explanation of it...
3.A. Google definition - The Android ROM is the Android operating system. This is the User interface (Sense UI in HTC phones) and the file system for maintaining contacts etc. It is composed of a Linux kernel and various add-ons to achieve specific functionality.- I would define it as a user-developed version of android if we are talking about custom ROMs.
4.A. Yes when you back up it backs up everything except the radio.
To further explain why people might use TIBU and CWM/TWRP is because most people make a full nandroid (cwm backup) for safety / oops moments or just to try out a different rom. TIBU is usually used when users go from rom to rom and dont want to mess with playstore taking its sweet time to reinstall. (only restore app/app data. NEVER RESTORE SYS DATA unless on the same version of android. the sys files are always different rom to rom or version to version)
Baseband is the Radio, Just fyi there are several different versions of radios for our phone but they are typicall Version specific. ie: gb radios wouldnt work on JB
Not as a troll or flame but I am just curious why you are still using GB? My advice is just to install cm10 + gapps and look up installing cyandelta from the playstore.
I offer that as a suggestion because it will update your phone autonomously. also review the forums for which radios are best for cm (I'm still using uclf6 even though there are newer versions)
I have a few questions about updating pico to jelly bean. At the moment I have rooted pico with stock rom. I know the basics (how to flash roms, kernels, doing nandroid etc.) but with pico I am a bit confused. Banned has done a wonderful pico faq, but be patient I want just to make few things clear... I want to end up with cm10 pico, using mount2ds or something similiar and without getting my nand burnt. So first i probably should make backup, then flash cm10 beta 6, gapps, lockscreen fix and kernel. What kernel should I flash if I want init.d and ext2/3/4 support and not burn my nand (I know that init.d support can be added somehow). I see 3 different options http://forum.xda-developers.com/showthread.php?p=39804373 http://forum.xda-developers.com/showthread.php?p=37649737 http://forum.xda-developers.com/showthread.php?p=36303556 and if I end up with 2.6 kernel I should also flash usb tether fix? Also there is few apps on my phone that I need to backup... If I backup them with titanium backup and after I have set up mount2sd will restoring them work normally (they are user apps)? Sorry about a bit unorganized post.
try the Pandora kernel it is free of errors in cm10
forum.xda-developers.com/showthread.php?t=2238754
titanium backup wont cause any problem when you use m2sd
and try using ext 3 partition for sd-ext for best results
This second hand Infuse is running Froyo.uckh1 2.2.1 and kernel 2.6.32.9 and I've managed to root it, have green CMW 2.5.1.2 installed and rom manager installed (free ver). My goal is a stable newer stable custom ROM while keeping all the main functions working. the phone has no data to back up. I have been reading a lot of posts on how to upgrade to a custom ROM and i was trying to avoid having to flash it if possible (would like to stay with android)and let rom manager do it. can that be done? also which one should i try ? i know that this has been answered many times but i don't want to brick it and was looking for some guidance.
Thanks a lot and happy new year to all.
How did you root this phone...I was just given this phone and can't root it. My other phone is a galaxy 3 and that was a piece of cake...please help.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
mikeka said:
This second hand Infuse is running Froyo.uckh1 2.2.1 and kernel 2.6.32.9 and I've managed to root it, have green CMW 2.5.1.2 installed and rom manager installed (free ver). My goal is a stable newer stable custom ROM while keeping all the main functions working. the phone has no data to back up. I have been reading a lot of posts on how to upgrade to a custom ROM and i was trying to avoid having to flash it if possible (would like to stay with android)and let rom manager do it. can that be done? also which one should i try ? i know that this has been answered many times but i don't want to brick it and was looking for some guidance.
Thanks a lot and happy new year to all.
Click to expand...
Click to collapse
Solution 1:
http://forum.xda-developers.com/showthread.php?t=1705260
Solution 2:
READ: http://forum.xda-developers.com/showthread.php?t=1293751
I don't know anything about green CWM red is available on the link provided though if it becomes an issue. You'll need a CWM flashable ROM and it sounds like you want a cleaned up stock version, others seems to have themes and other options you may not want, I didn't, performance is fine but I really didn't want to change the look. In that case you'll want this one:
http://forum.xda-developers.com/showthread.php?t=1508619
You'll find a working link in the last few pages of the thread.
Download it to your download directory on the SD which is built in the phone.
Also download this kernel:
2013.04.30-CWM-Synthesis-1.2Ghz.zip
http://forum.xda-developers.com/showthread.php?p=25724526#post25724526
or this one:
DD_03042012.zip - [Click for QR Code] (6.31 MB, 3966 views)
http://forum.xda-developers.com/showthread.php?t=1212795
In CWM wipe data/factory reset, wipe cache, wipe dalvik cache, format system, format data, format cache, install zip from SD card select ROM and flash then install zip from SD card select kernel and flash then reboot you'll have to uninstall the ATT stuff yourself or not, be careful that you don't remove apps needed by the system to function or by other system apps, most of the stuff with ATT in the name is safe and you need to remove tethering manager to be able to ever tether. Titanium backup root (TB) can uninstall them, be sure to first backup your new stock ROM in CWM before you start making changes because if you rip out the wrong apps you'll need to restore to boot. Use TB to backup an app if your not sure so you might not have to do a full restore. Be patient during boots.