Related
Hi,
Thanks to thiagodark I've finally rooted my phone (Got it in Feb)
Now for step 2 ... Flashing Roms
Can some one suggest where I start? I see that the [ROM] [Nightly] CyanogenMod 7 (alpha) is pretty popular ... would that be a recommended start?
Two things I look to after flashing a rom would be a) install BLN (so, the rom has to have support for that) and b) should have the power widget in the notification (where I can pull down notification and toggle wifi, sound, bluetooth or whatever). Would also prefer if the a 2.3.4 Rom.
Two other things I'd like to know and would really appreciate help with are:
a) Can I flash a rom and then install any kernel ... are they all compatible?
b) I did a Google Search and found these steps to Flash a Rom:
Flash a Custom ROM
1. Head over to our Nexus S ROMs section, choose a ROM you want and download it and save it to your computer.
2. Plug your phone in and mount the internal storage so we can transfer files to it.
3. Copy the ROM .zip file over to the root of the internal storage (NOT in any folders, just on the internal storage itself).
4. Turn off the phone.
5. Turn the phone on by holding down Volume Up and Power until Fastboot mode comes up.
6. Scroll down and select Recovery and wait for the phone to reboot into recovery mode.
7. Once in recovery mode, scroll to Backup, then select Backup and wait for the phone to backup its current ROM.
8. Once it is done, select Wipe Data
9. Then select Flash zip from SD Card
10. Select choose zip from sd card.
11. Select the ROM’s zip file you loaded onto the internal storage earlier and wait for it to flash. Done!
12. Repeat to load a different ROM.
Click to expand...
Click to collapse
My question is .... Is step 7 what is called a Nandroid? And do I need to do this every time or do I just need to do it when I think that the current setup is good enough to back up? ... yes, I will do it the first time and then only when I think I like a Rom, but want to try another and may revert.
Thanks a ton
Paparasee said:
Hi,
Thanks to thiagodark I've finally rooted my phone (Got it in Feb)
Now for step 2 ... Flashing Roms
Can some one suggest where I start? I see that the [ROM] [Nightly] CyanogenMod 7 (alpha) is pretty popular ... would that be a recommended start?
Two things I look to after flashing a rom would be a) install BLN (so, the rom has to have support for that) and b) should have the power widget in the notification (where I can pull down notification and toggle wifi, sound, bluetooth or whatever). Would also prefer if the a 2.3.4 Rom.
Two other things I'd like to know and would really appreciate help with are:
a) Can I flash a rom and then install any kernel ... are they all compatible?
b) I did a Google Search and found these steps to Flash a Rom:
My question is .... Is step 7 what is called a Nandroid? And do I need to do this every time or do I just need to do it when I think that the current setup is good enough to back up? ... yes, I will do it the first time and then only when I think I like a Rom, but want to try another and may revert.
Thanks a ton
Click to expand...
Click to collapse
First you will want to do is download ROM manager onto your phone, then flash the latest Recovery from within it.
Then you should do a Nandroid (this is the backup option in recovery... do this while everything is stock) this backsup your whole phone (apart from SD card) so if you screw something up you can restore it! It is real useful, you can nandroid as much as you like, all it is is an image of your phone.
If you are just starting out i would avoid the CM nightlies and find the stable thread which is 7.0.3. That coupled with Netarchys latest kernel (includes BLN) really works wonders.
As far as the actuall flashing, all you need to do is copy both zip files onto your sd card, reboot into the recovery (you can do that from within the ROM manager).
Once in the Recovery, wipe data,cache and dalvik, then select flash from zip and choose the rom.
Wipre cache and dalvik again and then flash the kernel and restart the phone.
Thats it you should be good to go. If you ever get any Force Closes restart into recovery again and run the Fix permissions
Happy flashing
Edit
Compatibility wise, CM 7.0.3 is still android 2.3.3 (will be updated to 2.3.4 with cm7.1) so you need a 2.3.3 kernel. You also need to know if your phone is NS3G or NS4G, they are not compatible
Thanks bringonblink ... guess I'm starting to get an understanding now.
Is this Rom Manager available on the market? ... I'll check
Since rooting, I've used my phone for a day, so I presume you suggest that I wipe data and then do the nandroid in step 7 above, then install the Rom manager and go from there?
I understand your suggestion of the stable CM7. Since there is just one link for the download, no confusions
The Netarchy though is a different story ...
What is the CFS and BFS build stuff.
I'm currently using a Nexus S i9020 with 2.3.4.
So, I use the CM7 + which version of Netarchy?
Thanks once again
Paparasee said:
Thanks bringonblink ... guess I'm starting to get an understanding now.
Is this Rom Manager available on the market? ... I'll check
Since rooting, I've used my phone for a day, so I presume you suggest that I wipe data and then do the nandroid in step 7 above, then install the Rom manager and go from there?
I understand your suggestion of the stable CM7. Since there is just one link for the download, no confusions
The Netarchy though is a different story ...
What is the CFS and BFS build stuff.
I'm currently using a Nexus S i9020 with 2.3.4.
So, I use the CM7 + which version of Netarchy?
Thanks once again
Click to expand...
Click to collapse
Rom Mangager is in the market yes.
No before you wipe , flash, crack, hack ANYTHING else again do a bone stock Nandroid backup and save it on your pc or something. This is because RIGHT NOW your phone is in a working state. THEN wipe cache ,dalvik and data and flash Rom.
7.0.3 is really nice, i had been keepign upwith the nightlies but for me 7.0.3 is the sweet spot... will flash to 7.1 stable when its out though xD.
CFS and BFS are different types of shedulers that run the phone (there is a proper explanation in netarchys thread on the first post i think)
You will want to get CFS as it is mroe stable and generally more user friendly lol.
You'll want CM7.0.3 + CFS Universal 2.3.3 1.3.4
Hey bringonblink ... thank you for your reply
I installed Rom Manager as suggested and then flashed the latest Recovery from within it. Booted into Recovery and did a backup. I then went rebooted, went to my internal storage and found the backup in a clockworkmod folder.
I then went to Rom Manager again and clicked on "Install Rom from SD card". I chose update-cm-7.0.3-NS-signed.zip, ticked Backup, Wipe Data and cache and Wipe Dalvik Cache then pressed ok to reboot.
I then got the big triangle with the ! and droid ... waited, nothing happened so I pressed power and volume up. ... this takes me to the regular stock recovery.
Why not to CWM recovery? Did I do something wrong?
Thanks for any help
Hmm flash the recovery again, but from rom manager choose reboot to recovery, don't actually update in rom manager
Sent from my Nexus S using XDA App
bringonblink said:
Hmm flash the recovery again
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I guess that was the key ... when I flashed recovery again, and then chose to install the rom with all those options ticked, it worked!!!!
Am now using a custom rom ... THANK YOU!!!
Now to the Netarchy kernel ... again ... through CWM recovery I presume.
PS: I never expected a reply so soon ... thought you might be sleeping ... thanks again.
Paparasee said:
I guess that was the key ... when I flashed recovery again, and then chose to install the rom with all those options ticked, it worked!!!!
Am now using a custom rom ... THANK YOU!!!
Now to the Netarchy kernel ... again ... through CWM recovery I presume.
PS: I never expected a reply so soon ... thought you might be sleeping ... thanks again.
Click to expand...
Click to collapse
Thats alright was on my way to work , so on the phone with xda app xD.
Yup same deal again for kernel
Thanks pal ... really appreciate it!
Installed the kernel & google addons too!
All ok now except ... don't have Gmail why is that and how do I get Gmail?
Thanks again!
Paparasee said:
Thanks pal ... really appreciate it!
Installed the kernel & google addons too!
All ok now except ... don't have Gmail why is that and how do I get Gmail?
Thanks again!
Click to expand...
Click to collapse
Market
Sent from my Nexus S using XDA App
matt2053 said:
Market
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Ayeeeeeeeee
For some strange reason, when I go to the market from my PC, I see Gmail, but when I try to install, I get the message:
This item cannot be installed in your device's country!
If I go through the market on my phone, I just cannot find gmail although there is a lot of other apps that include the word gmail.
incidentally ... after flashing CM7, anything I try installing through my PC browser gives the same result as above...
By the way ... any reason why gmail is not included with the rom and with the google addons?
Gmail is in the usual Google Apps package. Maybe try flashing it again.
Paparasee said:
For some strange reason, when I go to the market from my PC, I see Gmail, but when I try to install, I get the message:
This item cannot be installed in your device's country!
If I go through the market on my phone, I just cannot find gmail although there is a lot of other apps that include the word gmail.
incidentally ... after flashing CM7, anything I try installing through my PC browser gives the same result as above...
By the way ... any reason why gmail is not included with the rom and with the google addons?
Click to expand...
Click to collapse
gmail is not available yet in some countries. what you can do is install marketenabler and fake your provider and install gmail.
on cm7, the google apps are not included as they are propriety apps, they are not open source ( if u understand what i mean)
a few years ago, google tried to sue cyanogen for distributing the google apps through cyanogenmod. they then reached an agreement that cyanogenmod could exist provided no gapps were included within.
Hey, thanks for that explanation ... let me check the work around
Hey! am back!
Rather than go through the the trouble of installing market enabler, I just went about testing a couple of other Roms ... since I also wanted to know in what way other roms were different.
I tried Liquid and Infinity ... both were nice and both had gmail, so was happier with them! Wonder why Google went after the cyanogen guys, but the others include those apps
Anyway ... am now downloading Zulu.
After having installed custom roms such as Cyanogen-mod, Liquid and Infinity, I've realized that there are some must haves ...
a) Gmail & Talk (working over 3G)
b) Sip over 3G
c) Power Controls in notification (sexy as in Liquid)
d) screen lock as in Cyanogen (the modded rotary type with an option to add a 3rd party app)
e) BLN support (have not yet got used to the small lights turning on as in BLN but, guess I'll learn).
Would some one know of a Rom that caters to the above ... I'm experimenting with each, but if someone can help, I'd be able to settle in faster
Cheers!
Paparasee said:
Hey! am back!
Rather than go through the the trouble of installing market enabler, I just went about testing a couple of other Roms ... since I also wanted to know in what way other roms were different.
I tried Liquid and Infinity ... both were nice and both had gmail, so was happier with them! Wonder why Google went after the cyanogen guys, but the others include those apps
Anyway ... am now downloading Zulu.
After having installed custom roms such as Cyanogen-mod, Liquid and Infinity, I've realized that there are some must haves ...
a) Gmail & Talk (working over 3G)
b) Sip over 3G
c) Power Controls in notification (sexy as in Liquid)
d) screen lock as in Cyanogen (the modded rotary type with an option to add a 3rd party app)
e) BLN support (have not yet got used to the small lights turning on as in BLN but, guess I'll learn).
Would some one know of a Rom that caters to the above ... I'm experimenting with each, but if someone can help, I'd be able to settle in faster
Cheers!
Click to expand...
Click to collapse
They went after Cyanogen because it is the biggest Most ROMS are based off of it too.
BLN is needed in the kernel, not ROM, Netarchys support this.
I think you will like NScollab, runs off of CM7 with some nice tweaks, also includes netarchys kernel as default.
Oh and it already has all gapps included , including gmail
What a coincidence ... was just downloading NScollab ... 28% done
Thanks!
bringonblink ... am liking this NScollab rom
Edit: Never mind ... googled and found ... no use to me
When I go to the market, I get a pop up asking me if I need to install some apps. Any idea what they do and if it is needed?
The apps are:
Google Chrome to Phone ... never heard of this
Google Goggles ... I know this and won't need it.
Kickback
Soundback
Talkback ... these are the 3 I have no idea about!
Click to expand...
Click to collapse
Thanks ... and cheers!
First off, this is my first post (Woopty doo horraaaay) and I desperately need help.
I have a Wifi-Only Motorola Xoom, it used to be on 3.2.1, and I had it rooted, with only using the Tiamat 2.2.2 Moray root.
I've been wanting to upgrade to ICS for a while, and I finally am. I've had to reset my xoom back to stock 4 or 5 times now, and I'm annoyed and want to do it right. Starting off, my Xoom is starting on ICS, unlocked, unrooted.
I've done many different orders of stuff. First, I flashed the clockwork recovery mod, and then I go into it, and installed the EOS-Wingray-60, but after I did that, when I start up the xoom, it never loads, it stays on the "Team EOS" boot animation. I tested it, and left it on all night, and woke up and it was still on team eos. Next, I tried installing the universal root, (It worked), and THEN I installed the Wingray-60. Same problem, stuck on animation. I've repeated these several times, and am not sure what to do.
Pretty much all I want is to be able to overclock it. What order should I do when installing roots and things?
I have wingray-60, Rogue Kernal 2.0.2 Kuma, Universal root, Clockwork recovery mod, Tiamat 3.0.5 (Not sure what this is, but when I use it, it automatically aborts the install), and I have all of the **** to restore it back to factory + my original 3.2.1 backup rooted is saved.
What order should I use the installs in, and which ones should I use? And is there something I'm doing wrong?
To have ICS with Overclock, all you need is:
- Unlocked Bootloader
- Rooted
- CWM Recovery installed (Rogue)
- TeamEOS Wingray Build 60
- TeamEOS Google Apps V10.5
All the other stuff you listed, you can move to another folder for archive. You don't need it.
Follow these steps.
Use Titanium Backup to backup any applications and data you want to save. If you don't care about the apps/data, you can skip this step.
Boot into Recovery. Power off, when the Moto logo shows for about 1 sec, hold the Vol down. Select Android Recovery.
From CWM, select wipe data/factory reset **Warning - you will blow away all your apps/data *** See note about backing up first.
Follow these steps to ensure a clean first install. Select "wipe cache partition"
Select "Yes - Wipe Cache"
Select "advanced"
Select "Wipe Dalvik Cache"
Select "Yes - Wipe Dalvik Cache"
Select "+++++Go Back+++++"
Select Install from Zip, Select Zip. Navigate to your Team EOS ROM, and install it
IMMEDIATELY after the ROM is installed, install the Google APPS file via Select ZIP.
If you did everything correctly, Reboot. Now Team EOS boot animation should start and ICS will be available to you along with the Market. Restore your apps. Select from Settings to OC to your desired speed and enjoy.
Remember to thank the Devs for all their hard work and donate
al mon said:
To have ICS with Overclock, all you need is:
- Unlocked Bootloader
- Rooted
- CWM Recovery installed (Rogue)
- TeamEOS Wingray Build 60
- TeamEOS Google Apps V10.5
All the other stuff you listed, you can move to another folder for archive. You don't need it.
Follow these steps.
Use Titanium Backup to backup any applications and data you want to save. If you don't care about the apps/data, you can skip this step.
Boot into Recovery. Power off, when the Moto logo shows for about 1 sec, hold the Vol down. Select Android Recovery.
From CWM, select wipe data/factory reset **Warning - you will blow away all your apps/data *** See note about backing up first.
Follow these steps to ensure a clean first install. Select "wipe cache partition"
Select "Yes - Wipe Cache"
Select "advanced"
Select "Wipe Dalvik Cache"
Select "Yes - Wipe Dalvik Cache"
Select "+++++Go Back+++++"
Select Install from Zip, Select Zip. Navigate to your Team EOS ROM, and install it
IMMEDIATELY after the ROM is installed, install the Google APPS file via Select ZIP.
If you did everything correctly, Reboot. Now Team EOS boot animation should start and ICS will be available to you along with the Market. Restore your apps. Select from Settings to OC to your desired speed and enjoy.
Remember to thank the Devs for all their hard work and donate
Click to expand...
Click to collapse
Now, just to be clear, I should root with the universal root?
Do you have Titanium Backup or Rom Manager? Do you also have SU access?
If you do, you most likely have Root, but you can always re-root if you are unsure.
al mon said:
Do you have Titanium Backup or Rom Manager? Do you also have SU access?
If you do, you most likely have Root, but you can always re-root if you are unsure.
Click to expand...
Click to collapse
No, I had just restored my xoom back to factory. I just rerooted, using the universal root, then I wiped all my crap like you said, then I downloaded Eos 60, then I download Gapps and when I download gapps, my xoom says "E:Can't open /sdcard/EOS_GApps_ics_4.0.3_v9.zip (bad) Installation aborted".
Now what :|
You need to flash this version of the CMW Recovery. Without it, you cannot see/mount your SDCard.
http://forum.xda-developers.com/showthread.php?t=1074979
After flashing, reboot into recovery again and it should see the external SDCard which now contains your EOS ROM and EOS GApps. Flash those back to back and you should be good to go.
I CAN see my external SDCard!!!
If I couldn't see it, how could I even be rooted? That's a whole 'nother problem!
Sorry, but yeah, I can't see everything just fine. It's just Gapps is refusing to install, and everytime I install Eos 60, my device won't boot.
Slayergramp said:
I CAN see my external SDCard!!!
If I couldn't see it, how could I even be rooted? That's a whole 'nother problem!
Sorry, but yeah, I can't see everything just fine. It's just Gapps is refusing to install, and everytime I install Eos 60, my device won't boot.
Click to expand...
Click to collapse
Okay... Relax lol
Please answer these questions
1. Have u checked the md5 sums on the gapps and the eos rom? They are provided and a bad installation can mean your files are buggered sooo check the md5 are correct for each file
2. Did you install the rogue recovery or the modded cwm recovery using fastboot? (not using rom manager or whatever)
3. Have you factory wiped before installing the rom?
4. Did you wipe cache and dalvik cache?
5. Did you install the rom then the. Gapps?
6. Did you fix permissions once you finished flashing both files?
Thanks
Sent from my mind control device
joshndroid said:
Okay... Relax lol
Please answer these questions
1. Have u checked the md5 sums on the gapps and the eos rom? They are provided and a bad installation can mean your files are buggered sooo check the md5 are correct for each file
2. Did you install the rogue recovery or the modded cwm recovery using fastboot? (not using rom manager or whatever)
3. Have you factory wiped before installing the rom?
4. Did you wipe cache and dalvik cache?
5. Did you install the rom then the. Gapps?
6. Did you fix permissions once you finished flashing both files?
Thanks
Sent from my mind control device
Click to expand...
Click to collapse
First off, I finally got the EOS rom to work perfectly fine. My problem was that I never wiped the system's cache data or dalvik. And where do I check the Md5 sum for the Gapps? Because they still are a "(bad)" file.
Yes, I use a perfectly fine recovery, not rom manager, what permissions need fixing? Thanks.
Slayergramp said:
First off, I finally got the EOS rom to work perfectly fine. My problem was that I never wiped the system's cache data or dalvik. And where do I check the Md5 sum for the Gapps? Because they still are a "(bad)" file.
Yes, I use a perfectly fine recovery, not rom manager, what permissions need fixing? Thanks.
Click to expand...
Click to collapse
Download a free md5 program...
Look at the md5 when u download the gapps package in the goo in side me link in the eos thread
Sent from my mind control device
joshndroid said:
Download a free md5 program...
Look at the md5 when u download the gapps package in the goo in side me link in the eos thread
Sent from my mind control device
Click to expand...
Click to collapse
What IS md5, what does it need to be, and where do I check it? I don't understand the jibberish in the second half of your sentence.
Slayergramp said:
What IS md5, what does it need to be, and where do I check it? I don't understand the jibberish in the second half of your sentence.
Click to expand...
Click to collapse
Md5 is a unique hash that is calculated depending on the file.. When they match you have exactly what has been uploaded by the developer. When they dont that can be a cause of your problems.. I suggest u know and understand that for future for almost any file you download where one is provided... You can brick your device and it would be your own fault if you didnt check an md5.. So jibberish, hardly..
Now... Google a free md5 program for your computer and download n install it
Go to your relevant eos thread in first post there is a link for latest gapps packages...
Download the latest 10.5v if u havnt
Look at the md5 its displayed when you download the file or on the side of the file in the list...
Put the downloaded file in the md5 program on your computer and compare to the one provided..
Now try to flash this package within recovery...
Be sure to wipe caches, dalvik... Flash gapps.. Go to advanced then fix permissions... Then reboot.. See if it works.. If not try factory reset, wipe cache n dalvik, install rom, then gapps, then fix permissions.. Then reboot
Sent from my mind control device
I'm rooted and running stock 4.1.1 on Kernel 3.0.31. I would like to flash CM10 and have a couple of questions.
1. If I use Titanium Backup to save all my apps and data, can I restore them after flashing CM10 without any issues?
2. I beleive CM10 comes with it's own kernel, please confirm.
3. If CM10 comes with it's own kernel, is there a better kernel out there or is ibetter to stick with the one with CM10?
4. Should I just flash a stock CM10 nightly and gapps or is there a better custome rom with CM10 built in?
Any help or suggestions would be greatly appreciated!
Thanks ::laugh:
snyperr said:
I'm rooted and running stock 4.1.1 on Kernel 3.0.31. I would like to flash CM10 and have a couple of questions.
1. If I use Titanium Backup to save all my apps and data, can I restore them after flashing CM10 without any issues?
2. I beleive CM10 comes with it's own kernel, please confirm.
3. If CM10 comes with it's own kernel, is there a better kernel out there or is ibetter to stick with the one with CM10?
4. Should I just flash a stock CM10 nightly and gapps or is there a better custome rom with CM10 built in?
Any help or suggestions would be greatly appreciated!
Thanks ::laugh:
Click to expand...
Click to collapse
1. Should work for most apps, if not all apps
2. It does come with a Kernel
3. It's up to you, Matr1x and Air kernel are good alternatives
4. I like Androxide for a CM10 like rom. It's stable enough and has most of the good features
petenatas said:
1. Should work for most apps, if not all apps
2. It does come with a Kernel
3. It's up to you, Matr1x and Air kernel are good alternatives
4. I like Androxide for a CM10 like rom. It's stable enough and has most of the good features
Click to expand...
Click to collapse
Thanks petenatas!
Besides wiping all the caches, do I need to also wipe all data/user info? This will mean on first boot up i would need to re-enter all my user info, right?
snyperr said:
Thanks petenatas!
Besides wiping all the caches, do I need to also wipe all data/user info? This will mean on first boot up i would need to re-enter all my user info, right?
Click to expand...
Click to collapse
If you have CWM, do a data/factory reset before the installation, else CM10 will not boot
Yes, it's a complete re-installation. Your SD card will be safe though
You can also re-install from Play Store in My Apps / All
But if you enter you Google account at start-up and set up your wi-fi, it should re-install all the apps on it's own
petenatas said:
If you have CWM, do a data/factory reset before the installation, else CM10 will not boot
Yes, it's a complete re-installation. Your SD card will be safe though
You can also re-install from Play Store in My Apps / All
But if you enter you Google account at start-up and set up your wi-fi, it should re-install all the apps on it's own
Click to expand...
Click to collapse
Excellent, thanks again for your quick help!
snyperr said:
I'm rooted and running stock 4.1.1 on Kernel 3.0.31. I would like to flash CM10 and have a couple of questions.
1. If I use Titanium Backup to save all my apps and data, can I restore them after flashing CM10 without any issues?
2. I beleive CM10 comes with it's own kernel, please confirm.
3. If CM10 comes with it's own kernel, is there a better kernel out there or is ibetter to stick with the one with CM10?
4. Should I just flash a stock CM10 nightly and gapps or is there a better custome rom with CM10 built in?
Any help or suggestions would be greatly appreciated!
Thanks ::laugh:
Click to expand...
Click to collapse
I use Titanium for the apps I really need the data for. I will stop all updates through the store as soon as I get on a new ROM. Get TB restore apps with essential data. I will often just go through the store for others since I have had a few issues in the past doing everything through TB (lag, not working properly, Force closing).
I often use Matr1x cfs or bfs (CFS is a nice overall scheduler, with nice stability and it is good for a multitasker. BFS is a performance scheduler giving more performance to the currently running app, like a game. So if you aren’t really a multitasker or if you play a lot of games, BFS is a better choice. -- source http://matr1xkernels.com/category/matr1x-kernels/)
Thalamus is very stable, more stockish so there is less extras (BLN, BLD, OC, etc) http://forum.xda-developers.com/showthread.php?t=1651756
Try CM10 but I suggest you try many and decide for yourself. Ebvery phone is different and every user wants/likes different things as thay become "flashaholics" Just remember there is no "best ROM" Everything has some sort of bug.
stempox has an amazing always up to date complation of ROMs and Kernels http://forum.xda-developers.com/showthread.php?t=1721856
Finally clean install:
if you get a cluster f*#@ of problems then clean install. It isn't that hard. Use Titanium Backup and good to go.
In Recovery:
1. wipe data/factory reset (this formats /data, /cache and .android_secure on sd)
2. format /system, /boot
this leaves you with only bootloader, recovery and radio...dalvik-cache resides on /data, so it's gone already.
3. flash rom
4. gapps & custom-kernel (if needed). No need to let the phone boot & settle before flashing them (most custom-kernels have a script that automatically wipes /cache & dalvik during kernel-install)
5. reboot
6. Run TB -- restore missing apps with data --1st option under restore
just updating rom:
1. flash rom-zip
2. wipe /cache and dalvik-cache
3. reboot
Do this before reporting any issues on the thread since the problems are often related to this and not the ROM or kernel.
jayjay3333 said:
I use Titanium for the apps I really need the data for. I will stop all updates through the store as soon as I get on a new ROM. Get TB restore apps with essential data. I will often just go through the store for others since I have had a few issues in the past doing everything through TB (lag, not working properly, Force closing).
I often use Matr1x cfs or bfs (CFS is a nice overall scheduler, with nice stability and it is good for a multitasker. BFS is a performance scheduler giving more performance to the currently running app, like a game. So if you aren’t really a multitasker or if you play a lot of games, BFS is a better choice. -- source http://matr1xkernels.com/category/matr1x-kernels/)
Thalamus is very stable, more stockish so there is less extras (BLN, BLD, OC, etc) http://forum.xda-developers.com/showthread.php?t=1651756
Try CM10 but I suggest you try many and decide for yourself. Ebvery phone is different and every user wants/likes different things as thay become "flashaholics" Just remember there is no "best ROM" Everything has some sort of bug.
stempox has an amazing always up to date complation of ROMs and Kernels http://forum.xda-developers.com/showthread.php?t=1721856
Finally clean install:
if you get a cluster f*#@ of problems then clean install. It isn't that hard. Use Titanium Backup and good to go.
In Recovery:
1. wipe data/factory reset (this formats /data, /cache and .android_secure on sd)
2. format /system, /boot
this leaves you with only bootloader, recovery and radio...dalvik-cache resides on /data, so it's gone already.
3. flash rom
4. gapps & custom-kernel (if needed). No need to let the phone boot & settle before flashing them (most custom-kernels have a script that automatically wipes /cache & dalvik during kernel-install)
5. reboot
6. Run TB -- restore missing apps with data --1st option under restore
just updating rom:
1. flash rom-zip
2. wipe /cache and dalvik-cache
3. reboot
Do this before reporting any issues on the thread since the problems are often related to this and not the ROM or kernel.
Click to expand...
Click to collapse
Wow, thanks jayjay. That's a ton of great info! I know what I'm doing tomorrow night! Cheers!
I want to upgrade to JB custom ROM on TF101. I have seen a quite few. But I want to know which one is the best. Also please let me know do we need to download all the apps after upgrading the ROM. Is there a way to keep the apps intact after upgrading or reinstalling by taking back up. Downloading again will take a lot of data and a lot of time. Please help.
You can back up your apps with titanium backup onto an SD card or other external storage, but you must wipe the tablet when upgrading to JB, I recommend team eos nightlies with KAT kernel, they work very nicely.
You can also get the apk files from /system/app I think or /data/app and reinstall after putting those back on the tablet after wiping.
Shall you please let me know what is the purpose of KAT kernel
Thing O Doom said:
You can back up your apps with titanium backup onto an SD card or other external storage, but you must wipe the tablet when upgrading to JB, I recommend team eos nightlies with KAT kernel, they work very nicely.
You can also get the apk files from /system/app I think or /data/app and reinstall after putting those back on the tablet after wiping.
Click to expand...
Click to collapse
I'm running Revolver 4.2.1. What are the advantages going to JB from ICS? I'm going on a long trip soon, so I'm mainly looking for stability, battery performance and keyboard/dock compatibility.
Also, I'm reading that we need to install TWRP to run JB ROMs? Or can I still use CWM?
Thanks in advance!
tong143 said:
Shall you please let me know what is the purpose of KAT kernel
Click to expand...
Click to collapse
Lots of speed improvements over the stock kernel, fixes for different things like audio and gps
Grab the Kat-App too, that also boosts Audio and GPS
---------- Post added at 04:58 PM ---------- Previous post was at 04:53 PM ----------
needtoride said:
I'm running Revolver 4.2.1. What are the advantages going to JB from ICS? I'm going on a long trip soon, so I'm mainly looking for stability, battery performance and keyboard/dock compatibility.
Also, I'm reading that we need to install TWRP to run JB ROMs? Or can I still use CWM?
Thanks in advance!
Click to expand...
Click to collapse
Yes move to TWRP as soon as possible or risk bricking your TF as many have done trying to flash new ROMs with CWM
If you install Goo Manager you can easily install TWRP from the top right settings menu "Install OpenRecoveryScript"
Highly recommend TeamEOS4 and KatKernel in terms of everything you are looking for for your trip
Advantages over ICS are performance and stability and a new UI (Which is swappable with the ICS tablet version from settings in TeamEOS)
OK. I looked at some tutorials to get a sense of TWRP and Goo Manager. I know you can view and download ROMs from GM. So after downloading the ROM, boot into TWRP to install it? How about flashing kernels and the Kat app you referred to? Is that downloaded and installed in the same procedure?
Sent from my Infected HTC Incredible using Tapatalk 2
needtoride said:
OK. I looked at some tutorials to get a sense of TWRP and Goo Manager. I know you can view and download ROMs from GM. So after downloading the ROM, boot into TWRP to install it? How about flashing kernels and the Kat app you referred to? Is that downloaded and installed in the same procedure?
Sent from my Infected HTC Incredible using Tapatalk 2
Click to expand...
Click to collapse
Yep exactly the same as a ROM, I do it this way
For a ROM
Wipe Cache and Dalvik Cache and System
Install ROM
Wipe Cache and Dalvik Cache
---
For a Kernel
Wipe Cache and Dalvik Cache
Install Kernel
Wipe Cache and Dalvik Cache
---
For Gapps
Wipe Cache and Dalvik Cache
Install Gapps
Wipe Cache and Dalvik Cache
----
Basically Wipe Cache and Dalvik Cache between each flash and when your done, then reboot
For Kat App, its just an app, so wait until you're done with the above, boot into the ROM, get everything set up how you like it, then install the Kat App, its just an APK so you just use a file manager (ES File Explorer is my choice) and click it once to install it
Once in there, goto the Install section and install the GPS and Audio etc, the rest is pretty self explanatory, sections for Audio etc
EDIT - You don't have to use Goo Manager to download the ROMs or others either, sometimes its faster to use the PC and copy them over to the TF then reboot to recovery to flash them, you can use internal or external sdcards in TWRP, I have the links in my sig
EOS 4
I'll second the Team EOS 4 Recommendation
+1 for EOS4
This second hand Infuse is running Froyo.uckh1 2.2.1 and kernel 2.6.32.9 and I've managed to root it, have green CMW 2.5.1.2 installed and rom manager installed (free ver). My goal is a stable newer stable custom ROM while keeping all the main functions working. the phone has no data to back up. I have been reading a lot of posts on how to upgrade to a custom ROM and i was trying to avoid having to flash it if possible (would like to stay with android)and let rom manager do it. can that be done? also which one should i try ? i know that this has been answered many times but i don't want to brick it and was looking for some guidance.
Thanks a lot and happy new year to all.
How did you root this phone...I was just given this phone and can't root it. My other phone is a galaxy 3 and that was a piece of cake...please help.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
mikeka said:
This second hand Infuse is running Froyo.uckh1 2.2.1 and kernel 2.6.32.9 and I've managed to root it, have green CMW 2.5.1.2 installed and rom manager installed (free ver). My goal is a stable newer stable custom ROM while keeping all the main functions working. the phone has no data to back up. I have been reading a lot of posts on how to upgrade to a custom ROM and i was trying to avoid having to flash it if possible (would like to stay with android)and let rom manager do it. can that be done? also which one should i try ? i know that this has been answered many times but i don't want to brick it and was looking for some guidance.
Thanks a lot and happy new year to all.
Click to expand...
Click to collapse
Solution 1:
http://forum.xda-developers.com/showthread.php?t=1705260
Solution 2:
READ: http://forum.xda-developers.com/showthread.php?t=1293751
I don't know anything about green CWM red is available on the link provided though if it becomes an issue. You'll need a CWM flashable ROM and it sounds like you want a cleaned up stock version, others seems to have themes and other options you may not want, I didn't, performance is fine but I really didn't want to change the look. In that case you'll want this one:
http://forum.xda-developers.com/showthread.php?t=1508619
You'll find a working link in the last few pages of the thread.
Download it to your download directory on the SD which is built in the phone.
Also download this kernel:
2013.04.30-CWM-Synthesis-1.2Ghz.zip
http://forum.xda-developers.com/showthread.php?p=25724526#post25724526
or this one:
DD_03042012.zip - [Click for QR Code] (6.31 MB, 3966 views)
http://forum.xda-developers.com/showthread.php?t=1212795
In CWM wipe data/factory reset, wipe cache, wipe dalvik cache, format system, format data, format cache, install zip from SD card select ROM and flash then install zip from SD card select kernel and flash then reboot you'll have to uninstall the ATT stuff yourself or not, be careful that you don't remove apps needed by the system to function or by other system apps, most of the stuff with ATT in the name is safe and you need to remove tethering manager to be able to ever tether. Titanium backup root (TB) can uninstall them, be sure to first backup your new stock ROM in CWM before you start making changes because if you rip out the wrong apps you'll need to restore to boot. Use TB to backup an app if your not sure so you might not have to do a full restore. Be patient during boots.