I recently had my son's SGH-I727r in for a screen replacement. His phone was rooted and running a custom ROM but it is not unlocked. I couldn't get the phone to connect to any services so I odined back to stock. I have now taken it back to stock ICS and haven't a clue what is going on.
I am attaching some screenshots as well.
The phone is Rogers, NOT unlocked, Rogers LTE sim card, on a Rogers plan including data, all the phones information indicates Rogers but when trying to connect to a network it only offers me Bell or Telus, which of course do not work.
When I go to *#*#4636#*#* and select phone information the screen is blank, then goes black, then give me the error unfortunately the process com.android.phone has stopped.
I have tried various radios and modems...nada
Anyone??? Please???
EDIT>>>> I realized there was no ltemobile.apn and just added this:
Name: Rogers LTE
APN: ltemobile.apn
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Note set
MMSC: http://mms.gprs.rogers.com
MMS proxy: 10.128.1.69
MMS port: 80
MMS protocol: WAP 2.0
MCC: 302
MNC: 720
Authentication: None
APN type: *
APN enable/disable: checked
Bearer: Unspecified
Still no go
Conclusion....Nothing to be done...after literally hours off searching and trying different things with zero help, there is nothing to be done..I don't know if it got buggered up while being repaired or if something got jarred when the screen was broke. Regardless it's trash
Sent from my SGH-I747 using xda app-developers app
Related
All of a sudden, the pta APN network is flawlessly working for me, wife and friend's Skyrockets. I'm in NYC, is it working for you guys?
"Working", meaning that it'll browse regular, full, non-mobile sites with no problems...
Is working for me with no problems since yesterday. Finally
Sent from my SAMSUNG-SGH-I727 using xda premium
Good find. Just pulled up Justin.tv and loaded just like it should. Interesting...
I"m still stuck with mobile only on most sites. Cnn loads full page, but engadget and most others forces mobile.
However justin.tv loads full and normal.
As is mine. After the customer service/in store crap I had to deal with yesterday for 4 hours regarding this "data lag" problem (as they so called it), this better last a good long time.
Same here juat tested it justin.tv worked and loaded no lag as did cnn.com thankfully i just got the skyrocket yesterday but the browser not.loading alot of pages was irritating and made the phone useless to me without wifi. Glad its working now westminster md
Same here. Boston lte
Sent from my SAMSUNG-SGH-I727 using XDA App
what is PTA APN?
djarpit said:
what is PTA APN?
Click to expand...
Click to collapse
it's the stock APN on the phone
djarpit said:
what is PTA APN?
Click to expand...
Click to collapse
If you push menu settings wireless and networks mobile networks its access point names. And theres been an issue with the stock att apn not loading certin webpages but it seems to be corrected for the time being ( hopefully permanently) so if your not having this issue theres no reason to worry or change any settings
Washington DC LTE now working. Thank Goodness, I was about to jump ship.
Sent from my SAMSUNG-SGH-I727 using XDA App
Figures, that's my luck.
I was bothered by the APN issues and ended up returning my SR and going back to the GS2 cause I figured it would take AT&T forever to fix the problem.
Now they go ahead and fix it that fast.
Major bummer.
Had to modify APN settings in Minneapolis/St. Paul
I'm a NOOB to Android, but not smartphones. I wanted to post this reply, because I found most of the information on XDA, but not all in one place. Hopefully this saves others much of the time that I've spent on it.
Issue: My brand new Skyrocket would not connect to AT&T data network from my home when it was sitting right next to my wife's Galaxy S2 that was connected to AT&T data network. NOTE: Minneapolis/St. Paul is non-LTE.
Troubleshooting:
1. Swapped sims -- Galaxy S2 still works; Skyrocket still doesn't work.
2. Factory reset Skyrocket (several times) -- Skyrocket still doesn't work.
3. Got online with AT&T support. Checked some settnigs. Factory reset. -- Skyrocket still doesn't work.
4. Per AT&T support, went back to AT&T store to exchange phone. At the store, AT&T person looked at my phone and turned off the WiFi that had automatically (and correctly) connected to their AT&T hotspot. Voila Skyrocket connected to 4G. Good news, but somewhat distrubing. So, I decided to keep it and work with it some more.
5. Back at home, 4G still working....until I turned on WiFi (which automatically turns off AT&T data network). BAM!! AT&T data network would not come on again, when I turned off WiFi.
6. Next morning a Google search brought me to posts on XDA where others were having issues with the AT&T data network and and MMS.
Root cause:
-APNs configured in my Galaxy S2 were **different** than the APN configured in my Skyrocket -- very much like the posts on XDA.
-AT&T said the PTA network is brand new and they're still working out the kinks." from http://forum.xda-developers.com/showthread.php?t=1342159
-Also pulled some data from here: http://forum.xda-developers.com/archive/index.php/t-1337171.html
Solution:
Short version -- added 3 APNs and selected one of them.
Long version -- New APN Configuration that is working on my Skyrocket
==============
Galaxy S2 Skyrocket **modified configuration*** -- WORKING FOR ME!!!
**Not selected**
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
**Selected**
Name: ATT Phone
APN: Phone
MCC: 310
MNC: 410
APN type: Inernet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms
Name: ATT WAP2
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: supl
==============
Old Skyrocket configuration:
==============
Skyrocket Out of the Box PTA -- not working for me
**Selected**
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
==============
=============
Galaxy S2 Out of the Box APNs -- working on Galaxy S2
**Selected**
Name: ATT Phone
APN: Phone
MCC: 310
MNC: 410
APN type: Inernet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms,supl
=============
Can anyone put the PTA working apn its not working for me.
Running BeastMOD. try to set default but got 3g speed with it.
@saildiverdog
I had those apns listed here before from my own trial and errors in the OP of http://forum.xda-developers.com/showthread.php?t=1342159 . But since then took them down after the PTA network started working for a lot of us. And the wap.Cingular/PTA or wap.cingular/phone combo stopped working. The strange part was that the phone combo worked for me and my wife's worked with the PTA combo. Since the original post of this thread, they stopped working and the PTA was up and running.
For the rest/future readers, what's your location where the default apn is not working for you?
Woke up today with no data. Rebuilding the APN fixed the issue. I live near nyc so my guess is lte rollout confused some devices
Sent from my SAMSUNG-SGH-I727 using xda premium
madmike23 said:
@saildiverdog
I had those apns listed here before from my own trial and errors in the OP of http://forum.xda-developers.com/showthread.php?t=1342159 . But since then took them down after the PTA network started working for a lot of us. And the wap.Cingular/PTA or wap.cingular/phone combo stopped working. The strange part was that the phone combo worked for me and my wife's worked with the PTA combo. Since the original post of this thread, they stopped working and the PTA was up and running.
For the rest/future readers, what's your location where the default apn is not working for you?
Click to expand...
Click to collapse
my location is north chicago! 60061!
I unlocked my HTC Sensation and used it in the US for over a month after unlocking it. I traveled overseas and used it there but when I came back it wouldn't pick up T-Mobile network and won't see ATT neither. I tried factory reset and still didn't work. Is there anyone out there who can suggest something? anything?
Thank you all
I would call 611 and ask for support and tell them whats going on. maybe they will give you a code to get u.s signals back..... you can also check your apn.
Have you checked your APN? Try resetting it. You can do that through settings>Wireless and Networks>Mobile Networks>Access Point Names, press menu> Reset to Default.
Wasn't me!! I didn't do it!
Thanks to all.
I can't dial 611 because the phone doesn't pick up the network at all. And I tried to reset the network setting and still no luck.
does changing the Rom solve such an issue?
Anyone who reads this make sure this is the only APN on your list.
edit the data apn to say the following
Name: T-Mobile Data
APN: epc.tmobile.com
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: 216.155.165.50
MMS port: 8080
MCC: 310
MNC: 260
Authentication type: Not set
APN type: default,supl,admin,dun,mms,hipri
APN protocol: IPv4
APN enable/disable: APN enabled (greyed out)
Bearer: Unspecified
Sent from my HTC Sensation using xda premium
After changing the settings, I tried to manually search for network. it recognized the T-Mobile network but when I tried to connect to it it said "your sim card does not allow connection to this network" even though it's the same card that works in the cheep phone I'm using for now
I just bought this used skyrocket yesterday. Everything was working fine after I bought it including the 4G mobile data. Today, I called at&t to register the phone on my account and switch my data plan to LTE. They said the phone is clean and made the changes for me. I then decided to perform a factory data reset to get rid of the previous user's stuff. After the reset, everything works EXCEPT mobile data. I've tried everything -- powering the phone off/on, turning packet data off/on, airplane mode off/on, removing/replacing the SIM. I called at&t back and they said the phone is still clean, it's not been reported stolen and it's not blacklisted.
The seller told me he had a custom rom on it at one point, but he restored it to factory condition. I went into recovery mode and it still has the stock recovery so I'm assuming it's not rooted nor does it have a custom rom.
Any idea what the problem might be?
Thanks,
dw
You are gonna need a 4g Sim card. They should've told you that on the phone. Also check that you have data packets enabled
Did you check your APN?
--------------------------------------------------------------------
Sent from my Skyrocket i727 running Team Dirt
--------------Nexus 7 running AOKP PUB--------------
That was it! My APN settings were completely blank. I used these settings from another thread
Name: ATT LTE
APN: pta
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: httpcolon//mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth type: Not set
APN type: internet + mms
APN protocol: IPv4
Enable/diable APJ: APN enabled
Bearer: Unspecified
Works great now. Thanks for your help.
dwestall said:
That was it! My APN settings were completely blank. I used these settings from another thread:
Name: ATT PTA
APN: pta
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: httpcolon//mmsc.mobile.att.net
MMS proxy: proxy.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth type: Not set
APN type: internet + mms
APN protocol: IPv4
Enable/diable APJ: APN enabled
Bearer: Unspecified
Works great now. Thanks for you help.
Click to expand...
Click to collapse
Make sure u thank Mike :good:
i have a carrier unlocked One S, which used to be T-Mobile, now it's on AT&T. i remembered from when i had the One X that i had to setup a APN, so i found the necessary information and create one, worked fine, actually set it up a couple of times no problem. so today after i redid my phone again i create the APN, and now i can't get higher than 2G (tested in several locations) anyone any idea how i can resolve this?
(see attached image)
here's the content of the APN;
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
Click to expand...
Click to collapse
thanks in advance.
As far as I know, HTC One S DOESN'T support 4G (at least mine S3 variant doesn't). And if 3G isn't working also at locations where it should, are you sure you have the WSM/GSM mode, not only checked one of these?
Edit: Found out that this may be a hardware issue that happens after S-OFFING and/or SIM UNLOCKing
check this thread http://forum.xda-developers.com/showthread.php?t=2160389
it may be helpful
thanks guys... had some other issues and the seller is going to send me another One S... we'll see how that goes.
I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Nexein said:
I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Click to expand...
Click to collapse
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Shckr57 said:
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Click to expand...
Click to collapse
AT&T, I've tried resetting to default APNs as well as comparing mine to those in AT&T's Help and other peoples' own settings.
Droid2drummer said:
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Click to expand...
Click to collapse
See I can pick up wifi just fine, it's just my regular data that's acting up. I've tried looking into a guide for flashing radios but to be honest, I don't know much about LTE bands or anything. Is there a good guide here that I missed? It seems as simple as flashing one with CWR but I don't wanna ruin anything.
Write down your apn settings here so we can look at them
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Nexein said:
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Click to expand...
Click to collapse
-3G Settings-
Name: ATT
APN: wap.cingular
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: [email protected]
Password: cingular1
Server: <Leave in Blank>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms
APN Protocol: Leave it to the Default one
-4G Settings-
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: leave it to the Default one
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Nexein said:
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Click to expand...
Click to collapse
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Shckr57 said:
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Click to expand...
Click to collapse
Added both, tried selecting each one and I'm still having the same problem.
So to update, I've gone back to stock 4.4.4, straight from google, still not working, and then flashed the newest radio and that didn't do it either. Starting to thing it's a hardware problem, maybe actually is the SIM?
Ended up being the sim! Thanks for your help though, guys!