i have a carrier unlocked One S, which used to be T-Mobile, now it's on AT&T. i remembered from when i had the One X that i had to setup a APN, so i found the necessary information and create one, worked fine, actually set it up a couple of times no problem. so today after i redid my phone again i create the APN, and now i can't get higher than 2G (tested in several locations) anyone any idea how i can resolve this?
(see attached image)
here's the content of the APN;
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
Click to expand...
Click to collapse
thanks in advance.
As far as I know, HTC One S DOESN'T support 4G (at least mine S3 variant doesn't). And if 3G isn't working also at locations where it should, are you sure you have the WSM/GSM mode, not only checked one of these?
Edit: Found out that this may be a hardware issue that happens after S-OFFING and/or SIM UNLOCKing
check this thread http://forum.xda-developers.com/showthread.php?t=2160389
it may be helpful
thanks guys... had some other issues and the seller is going to send me another One S... we'll see how that goes.
Related
All of a sudden, the pta APN network is flawlessly working for me, wife and friend's Skyrockets. I'm in NYC, is it working for you guys?
"Working", meaning that it'll browse regular, full, non-mobile sites with no problems...
Is working for me with no problems since yesterday. Finally
Sent from my SAMSUNG-SGH-I727 using xda premium
Good find. Just pulled up Justin.tv and loaded just like it should. Interesting...
I"m still stuck with mobile only on most sites. Cnn loads full page, but engadget and most others forces mobile.
However justin.tv loads full and normal.
As is mine. After the customer service/in store crap I had to deal with yesterday for 4 hours regarding this "data lag" problem (as they so called it), this better last a good long time.
Same here juat tested it justin.tv worked and loaded no lag as did cnn.com thankfully i just got the skyrocket yesterday but the browser not.loading alot of pages was irritating and made the phone useless to me without wifi. Glad its working now westminster md
Same here. Boston lte
Sent from my SAMSUNG-SGH-I727 using XDA App
what is PTA APN?
djarpit said:
what is PTA APN?
Click to expand...
Click to collapse
it's the stock APN on the phone
djarpit said:
what is PTA APN?
Click to expand...
Click to collapse
If you push menu settings wireless and networks mobile networks its access point names. And theres been an issue with the stock att apn not loading certin webpages but it seems to be corrected for the time being ( hopefully permanently) so if your not having this issue theres no reason to worry or change any settings
Washington DC LTE now working. Thank Goodness, I was about to jump ship.
Sent from my SAMSUNG-SGH-I727 using XDA App
Figures, that's my luck.
I was bothered by the APN issues and ended up returning my SR and going back to the GS2 cause I figured it would take AT&T forever to fix the problem.
Now they go ahead and fix it that fast.
Major bummer.
Had to modify APN settings in Minneapolis/St. Paul
I'm a NOOB to Android, but not smartphones. I wanted to post this reply, because I found most of the information on XDA, but not all in one place. Hopefully this saves others much of the time that I've spent on it.
Issue: My brand new Skyrocket would not connect to AT&T data network from my home when it was sitting right next to my wife's Galaxy S2 that was connected to AT&T data network. NOTE: Minneapolis/St. Paul is non-LTE.
Troubleshooting:
1. Swapped sims -- Galaxy S2 still works; Skyrocket still doesn't work.
2. Factory reset Skyrocket (several times) -- Skyrocket still doesn't work.
3. Got online with AT&T support. Checked some settnigs. Factory reset. -- Skyrocket still doesn't work.
4. Per AT&T support, went back to AT&T store to exchange phone. At the store, AT&T person looked at my phone and turned off the WiFi that had automatically (and correctly) connected to their AT&T hotspot. Voila Skyrocket connected to 4G. Good news, but somewhat distrubing. So, I decided to keep it and work with it some more.
5. Back at home, 4G still working....until I turned on WiFi (which automatically turns off AT&T data network). BAM!! AT&T data network would not come on again, when I turned off WiFi.
6. Next morning a Google search brought me to posts on XDA where others were having issues with the AT&T data network and and MMS.
Root cause:
-APNs configured in my Galaxy S2 were **different** than the APN configured in my Skyrocket -- very much like the posts on XDA.
-AT&T said the PTA network is brand new and they're still working out the kinks." from http://forum.xda-developers.com/showthread.php?t=1342159
-Also pulled some data from here: http://forum.xda-developers.com/archive/index.php/t-1337171.html
Solution:
Short version -- added 3 APNs and selected one of them.
Long version -- New APN Configuration that is working on my Skyrocket
==============
Galaxy S2 Skyrocket **modified configuration*** -- WORKING FOR ME!!!
**Not selected**
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
**Selected**
Name: ATT Phone
APN: Phone
MCC: 310
MNC: 410
APN type: Inernet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms
Name: ATT WAP2
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: supl
==============
Old Skyrocket configuration:
==============
Skyrocket Out of the Box PTA -- not working for me
**Selected**
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
==============
=============
Galaxy S2 Out of the Box APNs -- working on Galaxy S2
**Selected**
Name: ATT Phone
APN: Phone
MCC: 310
MNC: 410
APN type: Inernet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms,supl
=============
Can anyone put the PTA working apn its not working for me.
Running BeastMOD. try to set default but got 3g speed with it.
@saildiverdog
I had those apns listed here before from my own trial and errors in the OP of http://forum.xda-developers.com/showthread.php?t=1342159 . But since then took them down after the PTA network started working for a lot of us. And the wap.Cingular/PTA or wap.cingular/phone combo stopped working. The strange part was that the phone combo worked for me and my wife's worked with the PTA combo. Since the original post of this thread, they stopped working and the PTA was up and running.
For the rest/future readers, what's your location where the default apn is not working for you?
Woke up today with no data. Rebuilding the APN fixed the issue. I live near nyc so my guess is lte rollout confused some devices
Sent from my SAMSUNG-SGH-I727 using xda premium
madmike23 said:
@saildiverdog
I had those apns listed here before from my own trial and errors in the OP of http://forum.xda-developers.com/showthread.php?t=1342159 . But since then took them down after the PTA network started working for a lot of us. And the wap.Cingular/PTA or wap.cingular/phone combo stopped working. The strange part was that the phone combo worked for me and my wife's worked with the PTA combo. Since the original post of this thread, they stopped working and the PTA was up and running.
For the rest/future readers, what's your location where the default apn is not working for you?
Click to expand...
Click to collapse
my location is north chicago! 60061!
Like the title says, since the second ROM I ever installed, (CM7 alpha 10 I believe) I have not been able to send/receive MMS on any combo of software , ICS or GB, kernel , etc. I have verified the APN's, still nothing... my plan allows unlimited, so unfortunate that I can't use it...Any ideas are welcome
Sent from my Sensation using XDA
Sensation-al! said:
Like the title says, since the second ROM I ever installed, (CM7 alpha 10 I believe) I have not been able to send/receive MMS on any combo of software , ICS or GB, kernel , etc. I have verified the APN's, still nothing... my plan allows unlimited, so unfortunate that I can't use it...Any ideas are welcome
Sent from my Sensation using XDA
Click to expand...
Click to collapse
I have the same problem with MMS as well.
I opened a topic in Q/A section but no one replied...
Im on energy ics rom and its my first custom rom setted mms apns for rogers correctly couldn't send pics didn't try receiving tho...
Sent from my HTC Sensation Z710e using xda premium
I don't know if this helps or not, but It seems like people with American Carriers, or T-mobile tend to not have issues with MMS. I don't know if this would work, but maybe comparing APN settings and seeing if anything is missing may work?
Settings -> More.. -> Mobile Networks -> Access Point Names ->
at this point I had three or three options...
I assume they were: T-Mobile, T-Mobile Data, and T-Mobile MMS
Now since I use Simple Mobile, I had to change the T-Mobile to Simple Mobile with all the correct settings, and for MMS to work I also had to change the T-Mobile MMS APN with the same exact settings as the Simple Mobile APN.
-----------------------------------------------------------------------------
One other way you may try, after putting all the correct settings;
Where is says APN Type, write "mms" (without quotes)
Give it a try. Hope it helps.
Problem is, I'm on Bell Canada...
Sent from my Sensation using XDA
Me on rogers it wasn't a signal issue as i had full bars i just saw the "h" coming up only the upper bar was lightning but the lower one was normal..
Sent from my HTC Sensation Z710e using xda premium
Sensation-al! said:
Problem is, I'm on Bell Canada...
Sent from my Sensation using XDA
Click to expand...
Click to collapse
This is not my work, please try and confirm.
BELL:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
ROGERS:
Here are the settings for Data
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
Leave the rest blank. Now you Data should be working
Here are the settings Multimedia Messaging
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
APN Type: mms
Leave the rest blank. Now MMS should be working!
HAVE A LOOK AT HERE: http://forum.xda-developers.com/showthread.php?p=21105129
I'm on Wind and I cant neither send nor receive mms but I think my settings are correct since the phone detected it automatically. Any ideas ?
I am with O2 uk and also had this issue. I contacted them and they emailed their latest apn settings to me, which I copied in to my settings and my mms then worked fine. I think when some custom roms search for the apns automatically they pick up out of date settings. Just phone your carrier and ask for the apn settings for mms as if you are getting internet but no mms on several roms it can only be due to incorrect apn.
sent from my Sensation XE
Pikabat said:
I'm on Wind and I cant neither send nor receive mms but I think my settings are correct since the phone detected it automatically. Any ideas ?
Click to expand...
Click to collapse
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
cdstewart said:
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
Click to expand...
Click to collapse
it did lol thanks dude , any idea what caused that?
No clue, maybe I should call back office and let them know..
cdstewart said:
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
Click to expand...
Click to collapse
thanks! solved my problem!
MasterGGM said:
This is not my work, please try and confirm.
BELL:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
ROGERS:
Here are the settings for Data
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
Leave the rest blank. Now you Data should be working
Here are the settings Multimedia Messaging
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
APN Type: mms
Leave the rest blank. Now MMS should be working!
HAVE A LOOK AT HERE: http://forum.xda-developers.com/showthread.php?p=21105129
Click to expand...
Click to collapse
For those having trouble with Rogers, I wasted quite a bit of time trying to figure out why I couldn't send/receive MMS. Solution for me was this:
1. USE ONLY THIS APN, DELETE ALL THE OTHER APNS - For some reason, it conflicted and when I deleted all the other unnecessary APN's it worked great again. Here's what I used and ONLY this one for Rogers Canada. The internet.com apn doesn't work for me, fortunately I found this one that works!
Name: Rogers MMS
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
Problem still exists, any ideas?
Sent from my Sensation using XDA
Is it possible to use any APNs for ATT&s data, like LTE or, HSPA+, or any other 3g/2g that would work? I am unlocked my sidekick recently and am only able to send/receive text and make/receive calls but can't find any working APNs.
:good: Thanks in advance.
Or point me to a thread for all of AT&Ts APNS for a thanks
Sent from my Desire HD using xda premium
AT&T uses a different kind of network for mobile data, I don't believe it's compatible. Compatible north american networks would be T-Mobile, Wind and Mobilicity.
Jax184 said:
AT&T uses a different kind of network for mobile data, I don't believe it's compatible. Compatible north american networks would be T-Mobile, Wind and Mobilicity.
Click to expand...
Click to collapse
Well i was able to find AT&T APNs that work with my unlocked (for AT&T) sidekick 4G, Thanks anyways
Just leave blank for the "none" settings.
Name: AT&T 310 410 (I Think it can be any name)
APN: wap.cingular
Proxy:-- none
Port: - - none
User name : [email protected]
Password: CINGULAR1
Server: --not set (leave blank)
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC port:310
MNC:410
Auth type:-- none
APN type: Internet + MMS
d9vabder said:
Well i was able to find AT&T APNs that work with my unlocked (for AT&T) sidekick 4G, Thanks anyways
Just leave blank for the "none" settings.
Name: AT&T 310 410 (I Think it can be any name)
APN: wap.cingular
Proxy:-- none
Port: - - none
User name : [email protected]
Password: CINGULAR1
Server: --not set (leave blank)
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC port:310
MNC:410
Auth type:-- none
APN type: Internet + MMS
Click to expand...
Click to collapse
Nicely done.
Thanks :good:
Sent from my Unlocked Sidekick 4g (on AT&T) using xda premium
I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Nexein said:
I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Click to expand...
Click to collapse
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Shckr57 said:
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Click to expand...
Click to collapse
AT&T, I've tried resetting to default APNs as well as comparing mine to those in AT&T's Help and other peoples' own settings.
Droid2drummer said:
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Click to expand...
Click to collapse
See I can pick up wifi just fine, it's just my regular data that's acting up. I've tried looking into a guide for flashing radios but to be honest, I don't know much about LTE bands or anything. Is there a good guide here that I missed? It seems as simple as flashing one with CWR but I don't wanna ruin anything.
Write down your apn settings here so we can look at them
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Nexein said:
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Click to expand...
Click to collapse
-3G Settings-
Name: ATT
APN: wap.cingular
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: [email protected]
Password: cingular1
Server: <Leave in Blank>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms
APN Protocol: Leave it to the Default one
-4G Settings-
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: leave it to the Default one
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Nexein said:
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Click to expand...
Click to collapse
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Shckr57 said:
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Click to expand...
Click to collapse
Added both, tried selecting each one and I'm still having the same problem.
So to update, I've gone back to stock 4.4.4, straight from google, still not working, and then flashed the newest radio and that didn't do it either. Starting to thing it's a hardware problem, maybe actually is the SIM?
Ended up being the sim! Thanks for your help though, guys!
Hi all,
recently I got my new phone Hisense A2 pro imported, but can't get it set up right. It's not the original ROM.
2g, 4g is written at the upper lefter corner and I can get SMS, but no internet connection. I think the APN settings are wrong, but I'm not sure and tried different settings. Does it sound as if it's a problem with the APN or could it be something else My recent settings are:
Name: o2 internet
APN: internet
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: 10.81.0.7:8002
MMS proxy: 82.113.100.5
MMS port: 8080
MCC: 262
MNC: 07
Authentication type: None
APN type: default,supl,mms
APN protocol: IPv4/IPv6
APN roaming protocol IPv4
Bearer: Unspecified
MVNO type: None
MVNO value: Not set
Many thanks in advance!
IMinoI said:
Hi all, recently I got my new phone Hisense A2 pro imported, but can't get it set up right. It's not the original ROM...
Click to expand...
Click to collapse
I don't have this device but, I believe that one or both of the following threads may be helpful for what you need and don't be afraid to ask for some member guidance within one of them.
https://forum.xda-developers.com/showthread.php?t=3694644
https://forum.xda-developers.com/showthread.php?t=3673945
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
...please i would to find a twrp and a custom rom but i sppose it is just a dream. i've just discovered this phone.... sold at onlu 120euro and at this price is incredible but i could not live without a twrp and possibly a custom rom......
IMinoI said:
Hi all,
recently I got my new phone Hisense A2 pro imported, but can't get it set up right. It's not the original ROM.
2g, 4g is written at the upper lefter corner and I can get SMS, but no internet connection. I think the APN settings are wrong, but I'm not sure and tried different settings. Does it sound as if it's a problem with the APN or could it be something else My recent settings are:
Name: o2 internet
APN: internet
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: 10.81.0.7:8002
MMS proxy: 82.113.100.5
MMS port: 8080
MCC: 262
MNC: 07
Authentication type: None
APN type: default,supl,mms
APN protocol: IPv4/IPv6
APN roaming protocol IPv4
Bearer: Unspecified
MVNO type: None
MVNO value: Not set
Many thanks in advance!
Click to expand...
Click to collapse
i have exactly same problem as you, have you solved it？are you in Germany? i'm in germany and my card is also o2, can see 4g but no data connection. But i have tried my girlfriend's card(Eplus), it worked. i may switch my provider