Related
Hi!
Just found a way to update to JB from the 1.053 version (Acer_AV043_A700_RV22RC03_EMEA_DE) on wich every other update failed for me. But runs with the other versions, too.
Unlock Bootloader
Install CWM (6.0.1.4)
Visit this german forum
get the file A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip
flash it via CWM
DONE!
Just tested and it's working.
Credits go to those who deserve it.
I deleted CWM and a mate let it where it was and both A700 are running fine [*] (see below!)
... now waiting for root
----------------------------
[*] New info:
My friend, who kept CWM, unlocked the bootloader again after the update and now has a bootloop. So my advice is to kill CWM after the update.
I don't get into recovery too (with locked bootloader) it says "recovery image verified failed". But system starts normally afterwards.
------------------
More info:
I had CWM on the tab too, because i misunderstood the question:
When asked
Code:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
say NO! to kill CWM.
------------------
Still more info to come:
(4.10.2012)
The bootloop was fixed by flashing a propriate recovery after beeing able to enter fastboot using the right key combination.
andiby left us a JB stock recovery: recovery.img and he build a CWM 6.0.1.4 with JB Kernel: recovery-a700-6014JB.img which runs fine for me.
Use the CWM with JB Kernel only to flash files and not to WIPE, FORMAT or RESTORE a backup, because there were issues with a different JB based CWM and I can't guarantee this one to work, because I have not tested it.
I'm on FR Firmware, can you tell me how should I proceed?
If you want to keep the FR firmware you will have to wait for an appropriate update file.
If you want to switch to Germen I think it should work with this method, because the zip file contains everything from bootloader to system files.
Do you think I can here: https://app.dumptruck.goldenfrog.com/p/GOKKb2PavJ download an install then install Acer_A700_AV043.RV07RC03_AV043.RV07RC06_EMEA_DE thereafter this here JB?
I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
I think you only need the file from my post, because there is everything in it fpr JB afaik, but I can give no guarantee, because I only used it to update my German version.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my request.
DЯΦ[email protected]П said:
I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my wish.
Click to expand...
Click to collapse
Yes but i can from FR Firmware to DE and install first update (5MB) and this is 1.053 => finally JB or i think wrong?
PS: Nope. These are my projects
update or flash total
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?
elunico32 said:
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?
Click to expand...
Click to collapse
It's an update. Everything is on the tab as before.
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.
Thank
Thank you. I will flash now.
DЯΦ[email protected]П said:
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.
Click to expand...
Click to collapse
You don't understand me what i mean. I will flash the DE Firmware afterthat 1.053 und then the JB!
Are you from germany?
DakiX said:
You don't understand me what i mean.
Click to expand...
Click to collapse
Maybe ...
I will flash the DE Firmware afterthat 1.053 und then the JB!
Click to expand...
Click to collapse
I just don't get why you want to flash anything else before the "A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip" because it is a FULL ROM and should be flashable over ICS 1.023, ICS 1.027, ICS 1.053 and ICS 1.055 to get JB 1.028.
Are you from germany?
Click to expand...
Click to collapse
My flag says: yes
You have a PM
Works great ! Thanks !
But for me, recovery 6.0.1.4 is KO after the update. I need to use the one with "the brick bug". Not good at all
I will wait for Pawitp before using it...
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?
DakiX said:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?
Click to expand...
Click to collapse
I disabled it, then CWM is away and the Tab as stock as possible.
A friend kept CWM and now has some issues...
HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist
DakiX said:
HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist
Click to expand...
Click to collapse
Can you get into recovery mode using "adb reboot recovery"?
Nope.. failed but its understandable because CWM must be made for 4.1.1
DakiX said:
Nope.. failed but its understandable because CWM must be made for 4.1.1
Click to expand...
Click to collapse
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?
DЯΦ[email protected]П said:
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?
Click to expand...
Click to collapse
Yes i disable it. I can in stock recovery but CWM is gone^^ that i mean :highfive:
Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
sawclOne said:
Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Is your phone Rooted?
Jrcon said:
Is your phone Rooted?
Click to expand...
Click to collapse
Yes my phone is rooted
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
....
Jrcon said:
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
Click to expand...
Click to collapse
Yes thank you but when i install that my phone will work right?
sawclOne said:
Yes thank you but when i install that my phone will work right?
Click to expand...
Click to collapse
Let me guess: no backup or anything?
if you have back up try restoring it from recovery...if you dont then reinstall the rom again from recovery.(wipe cashe data..system) should work just fine...at least is what i did in my nexus s..when i did this mistake..
Are your recovery and rom stock or custom? Cyanogenmod, CWM recovery etc...
If I were you, I would install CWM recovery for your phone and then install some custom rom, they are just awesome
Thx
Thank you all!!!
same problem
i have the same problem my phone just gets stuck with the google screen, but I already had cwm recovery installed but when I try to install cm9 or even cm7 its says that it cant open the package and the installation gets aborted. should Itry using the wug toolkit to flash the zips. and am i supposed to install sabra root toolkit on my phone...??? thanks.
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
Hi Friends.
I rooted Micromax A110 & tried flashing a custom ROM of A110 plus & since then it just shows boot screen & keeps flashing it. I tried to flash multiple ROMs after that but no luck. Can anyone help on this one please?
Thanks in advance.. Tapan
tapan85 said:
Hi Friends.
I rooted Micromax A110 & tried flashing a custom ROM of A110 plus & since then it just shows boot screen & keeps flashing it. I tried to flash multiple ROMs after that but no luck. Can anyone help on this one please?
Thanks in advance.. Tapan
Click to expand...
Click to collapse
Have u flashed kernel ??
talhask said:
Have u flashed kernel ??
Click to expand...
Click to collapse
I tried to flash boot.IMG
I zipped it & tried to flash , it failed. I tried to add the boot.IMG in custom ROM's but no luck. Its failing . I think I'm unaware of the flashing kernel process.
tapan85 said:
I tried to flash boot.IMG
I zipped it & tried to flash , it failed. I tried to add the boot.IMG in custom ROM's but no luck. Its failing . I think I'm unaware of the flashing kernel process.
Click to expand...
Click to collapse
Download any kernel
Put it in SD card
Go into recovery
Flash kernel
Reboot and its done
talhask said:
Download any kernel
Put it in SD card
Go into recovery
Flash kernel
Reboot and its done
Click to expand...
Click to collapse
Trust me, there is no such option in cwm recovery 6.0.1.2 to flash kernel. Wat I did was: created a zip of boot.IMG, tried flashing the boot.zip
It gives me: installation aborted. Is there another way to flash kernel ? Also, can u suggest some working kernel?
tapan85 said:
Trust me, there is no such option in cwm recovery 6.0.1.2 to flash kernel. Wat I did was: created a zip of boot.IMG, tried flashing the boot.zip
It gives me: installation aborted. Is there another way to flash kernel ? Also, can u suggest some working kernel?
Click to expand...
Click to collapse
Bro it is same like flashing ROM ....
talhask said:
Bro it is same like flashing ROM ....
Click to expand...
Click to collapse
What should I do then?? Which kernel do u think I should use??
Thunderzap kernel is best ... Flash it same like u flash rom
talhask said:
Thunderzap kernel is best ... Flash it same like u flash rom
Click to expand...
Click to collapse
Buddy.. Like I said.. Its falling.. Can u give me the steps please..?
tapan85 said:
Buddy.. Like I said.. Its falling.. Can u give me the steps please..?
Click to expand...
Click to collapse
Download kernel
Place it in sdcard (don't unzip kernel)
Go into recovery
Install zip from sdcard
Choose zip from sdcard
(Locate kernel where u have put it and install)
Reboot and enjoy
talhask said:
Download kernel
Place it in sdcard (don't unzip kernel)
Go into recovery
Install zip from sdcard
Choose zip from sdcard
(Locate kernel where u have put it and install)
Reboot and enjoy
Click to expand...
Click to collapse
Yeah right.. i seem to have some luck here.. will update you..
tapan85 said:
Yeah right.. i seem to have some luck here.. will update you..
Click to expand...
Click to collapse
suppose this is what i do:
Download kernel
Place it in sdcard (don't unzip kernel)
Go into recovery
Install zip from sdcard
Choose zip from sdcard
what after this to install the ROm:
1st question: Which is the most stable ROM for A110 >4.2 ?
Shall i just continue installing the ROM after installing the kernel?
tapan85 said:
suppose this is what i do:
Download kernel
Place it in sdcard (don't unzip kernel)
Go into recovery
Install zip from sdcard
Choose zip from sdcard
what after this to install the ROm:
1st question: Which is the most stable ROM for A110 >4.2 ?
Shall i just continue installing the ROM after installing the kernel?
Click to expand...
Click to collapse
The most stable rom is SLT Tsunami Advanced edition
you have to install Rom first and then install Kernel
talhask said:
The most stable rom is SLT Tsunami Advanced edition
you have to install Rom first and then install Kernel
Click to expand...
Click to collapse
Alright grt!!!! It worked like a charm!!
Thanks a bunch buddy!! I really appreciate all your help...
One last question.. Is there any kitkat based ROM available for A110??
tapan85 said:
Alright grt!!!! It worked like a charm!!
Thanks a bunch buddy!! I really appreciate all your help...
One last question.. Is there any kitkat based ROM available for A110??
Click to expand...
Click to collapse
No but devs are working on CM11 .....:crying::crying:
click on thanks button if a helped:good:
post is removed As developer's asked so but no worry he himself will post his work
developer cyandrew
contact him for more information about rom
its not installing
DiteshJ said:
its not installing
Click to expand...
Click to collapse
please explain detail.... I will try to solve your problem
Cm12.1 beta v7
It gives erorr while installing in twrp recovery
Please say to me how to install this rom plz
Thanx
Zizo22222 said:
It gives erorr while installing in twrp recovery
Please say to me how to install this rom plz
Thanx
Click to expand...
Click to collapse
which package
1- Download cm 12.1 (6 stable) or
2- Download see 12.1 (7v2 revised) or
3- download cm 12.1 unofficial final stable or
In cm12.1 v7 revised it gives erorr and says update failed
Zizo22222 said:
In cm12.1 v7 revised it gives erorr and says update failed
Click to expand...
Click to collapse
use new now..
rejul said:
use new now..
Click to expand...
Click to collapse
How to install it plz and i have to install v2 or v3
Zizo22222 said:
How to install it plz and i have to install v2 or v3
Click to expand...
Click to collapse
v3 is the latest
The rom isnt working and says update failed while installing in recovery
do i need to wipe the system to? on twrp?
Zizo22222 said:
What is the way to install it
Plz
And thank you very much for the new version
Click to expand...
Click to collapse
important:*make backup of your current rom before installing new custom rom
Download the firmware and put it in the root of the SD-card
- Go to the recovery, to make Wipe Data, Cache, and Dalvik Cache (additionally u can wipe system if any error came across)
-Find firmware and install it
- Wait for it to complete nstall
- Restart
kimijayr said:
do i need to wipe the system to? on twrp?
Click to expand...
Click to collapse
actually it better to wipe system to give a clean install
I am interested to use this rom (since Lenovo isn't going to update it to 5.X), but can you tell me what works and what doesn't? If camera, video recording and video playback works, then I will have no absolute problem to use it. I just need your confirmation.
This is cyandrew (Mel Andrew), the one who ported this ROM. Please turn down this post. Do not mirror links. Ask for my permission if you are going to post it elsewhere. You can go to our facebook group and check my ported ROMs there.
JohnSmith743 said:
I am interested to use this rom (since Lenovo isn't going to update it to 5.X), but can you tell me what works and what doesn't? If camera, video recording and video playback works, then I will have no absolute problem to use it. I just need your confirmation.
Click to expand...
Click to collapse
i already posted the changelog... most of the bugs are fixed
gps has some issue
rejul said:
actually it better to wipe system to give a clean install
Click to expand...
Click to collapse
ty
rejul said:
i already posted the changelog... most of the bugs are fixed
gps has some issue
Click to expand...
Click to collapse
So I know this needs a recovery menu to install the rom, like ClockWork Mod. But I need your help, how can I install it?
JohnSmith743 said:
So I know this needs a recovery menu to install the rom, like ClockWork Mod. But I need your help, how can I install it?
Click to expand...
Click to collapse
at first you need custom recovery for lenovo a536 (twrp,cwm,philiz..)
use sp flash tool to install custom recovery(here is the tutorial)
after installing custom recovery
switch off phone ,take battery out for a minute then put it back,
press volume up+volume down+power button together until recovery shows
in recovery clear data,cache,
then select install from sd card then navigate to root folder where you put ur rom zip file and then flash it(press power button to select)
wait to install ur rom...finish
rejul said:
at first you need custom recovery for lenovo a536 (twrp,cwm,philiz..)
use sp flash tool to install custom recovery(here is the tutorial)
after installing custom recovery
switch off phone ,take battery out for a minute then put it back,
press volume up+volume down+power button together until recovery shows
in recovery clear data,cache,
then select install from sd card then navigate to root folder where you put ur rom zip file and then flash it(press power button to select)
wait to install ur rom...finish
Click to expand...
Click to collapse
Does it matter if I have the latest official firmware? I mean the cwm recovery file that I have has the name of an older version of the firmware.