Related
HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
tanmay5 said:
HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/show....php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/show....php?t=1960080 check the first post for the Stock V2 ROM
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
mayur.3.92 said:
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
Click to expand...
Click to collapse
i think you need the cynus t2 driver..
0. Uninstall the micromax canvas 2 drivers.
1. Install mobistel cynus t2 rom using stock recovery.
2. Connect phone to pc, install mobistel drivers.
3. Remove phone from pc and turn it off. Open device manager in computer. Connect switched off phone to pc. You'll see a device in the COM ports section. Quickly right click it as it vanishes after a few seconds. Right click it and select update device driver.
4. Select the folder in which the cynus t2 drivers are installed. Now the drivers will be installed.
5. Replace the recovery.img with cwm recovery in stock v2 folder.
6. Remove your phone now and let it remain switched off. Open sp flash tool in administrator mode(just in case).
7. Load the scatter loading file and click download button.
8. Connect the phone now. And now everything should go fine.
yeah my mt65xx drivers was not installed after installing i used sp flash tools selected scatter file n recovery pressed download
red bar completes and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
sir when i use sp flash tool to root jb cynus t2 rom, i selected download when i connected my device it shows 100% with red bar and shows enter usb in 15 sec and after that shows an error 8100 usb port cant be located .
help as com ports are installed for MT65xx and is working properly and named is preloade usb vcom(android) Com 4.
yeah my mt65xx drivers was not installed after installing/updating from drive i selected mobile cynus t2 under program files and said encounted a problem and cant update drivers so i downloaded MT65xx drivers from xda site and browsed and drivers got installed named is preloade usb vcom(android) Com 4. i used sp flash tools selected scatter file n recovery pressed download
red bar completes 100% and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
this is the error i m getting
tanmay5 said:
this is the error i m getting
Click to expand...
Click to collapse
still no luck ?.
did you try drivers from pdanet?..
did u use "run as admininstrator" for running flashtool... then try without that. because for me, bin4ry rooting donot wrk if i use run as admin option!..
in one tutorial i found
"Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode."
http://forum.xda-developers.com/showthread.php?t=1982587
so try keeping the cwm recovery.img in the same place as stock recovery was .. ( this is a wild wild gues) ..
Year I m tried a lot of trying I though buying an android will b a good move
But I think I ll stick to windows.
Thanx a lot bro for ur help n effort keep ur work up
I m going 2 sell canvas 2 I thought dev on xda will help me but no one is boughther about jb root
If any news about its root plz tel me
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
mmxa110user said:
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
Click to expand...
Click to collapse
I'll surely wait
thanx dude
if something new comes up please notify me
tk care
Flash tool @ 0%
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Josephxxx said:
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Click to expand...
Click to collapse
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
tanmay5 said:
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
Click to expand...
Click to collapse
If u have CWM or twrp Recovery...just download su update from here - http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip copy it to sd card & flash it via CWM or TWRP. maybe it will help u.
Yes!!!!!!!!! Flash/Unbrick Your Xolo A700
(PLEASE FOLLOW INSTRUCTIONS CAREFULLY,I AM NOT RESPONSIBLE IF YOU TURN IT INTO A PAPERWEIGHT)
Firstly Download Firmware And Tools From This Link
Things Needed
Bricked Xolo A700
Usb Cable
Windows Pc
And A Calm Head
Instructions
Click Here For Youtube Tutorial
Remove Battery From Your Phone And Re-insert It
Connect Your Phone To Pc With Usb Cable
Your PC Will Prompt You To Install The Usb Drivers
Go To-Device Manager>Ports>MTK 65xx Preloader
And Do A Right Click On It>Update Driver>Browse My Computer For Driver(Something Like That)
Select The Driver Folder Where You've Extracted All The Files From The ZIP And Follow The Setup
After Installing Remove Your Phone From PC
Remove And Re-Insert The Battery
Open SP Flash Tool
Click On Scatter Loading
Navigate To The Folder Where You've Extracted The Stock Rom Folder
Select MT6577 Scatter .txt
Click On Download Button>Click On Yes
Connect Your Phone And Wait Till The Process Is Complete
Voila!!!!!!!!!!!!!!!!!!!!!!!!!!
You.................Yes You've Done It
For Those Who Are Facing Black Screen After Flashing
Hit Format-Download Button Instead Of Pressing Download
And Everything Will Be FIne:highfive::highfive:
Need Help
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
safetydell said:
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
Click to expand...
Click to collapse
ys you can recover it with help of the above tut
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
Thanks, I am out of station as of now, will go home by Saturday, I will surely try this method, hope it helps me to recover my device..
The download link to "firmware and Tools " is not working.
Edit: It is Working now.
Help Needed
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
No Luck dude, I did the same as you said but after everything it showed download complete and I started my phone, it came to logo " XOLO " and after that blank screen waited a lot but still the same blank screen, any help from you pls...
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
yasirmujtaba said:
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
Click to expand...
Click to collapse
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
safetydell said:
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
Click to expand...
Click to collapse
which option you chose for format I chose "Automatic and format whole flash except bootloader and nav bin something"
it goes dead not even XOLO logo but when chose download it shows xolo logo and then blank
need urgent help
i formatted entiree flash and now sp tool doesnt detect my phone. please help me out.
Install the drivers agin and use diff usb cable
Sent from my IQ446 Magic using xda premium
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Didn't try FORMAT
I used the tools to unbrick my xolo a700 struck at bootloop. But no luck. its still the same. WHAT DO U SUGGEST???
Struck at XOLO logo after XOLO animation
I given factory Reset and the bricked.
I tried the procedure after that my xolo mobile struck at XOLO logo after XOLO animation...
Please help....!!!
guys please help us by posting some tried and tested step by step procedure. My Xolo A700s is stuck on boot loop. even i flashed original rom . but dont know what to do with the update file provided along with the rom. guys help
jash2711 said:
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Click to expand...
Click to collapse
What did you do? I think I have a similar issue with my tablet, a Pixi 8079.
i tried to root my Micromax A110 with official Jelly Bean with this guide
DRoidiser.com/2013/02/root-jelly-bean-updated-Micromax-a110
i have done everything they said i clicked download and clicked yes for new window and i connected my phone with out battery
but the flashing ended with an error SOC verification failed
please help
i have also tried to root with Bin4ry it showed everything successful but phone was not rooted.
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Root and CWM for Karbonn Smart A26
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Thank you so much!
Cant find the drivers.... pls help
hey guys. i was also trying to root my Karbonn Smart A26... but m unable to find the drivers for my device. even d karbonn homesite is not displaying the drivers... n due to this, while flashing recovery using SP flash tool, the procedure gets stuck up at searching. Pls help.. thanks in advance...
mtorero4 said:
hey guys. i was also trying to root my Karbonn Smart A26... but m unable to find the drivers for my device. even d karbonn homesite is not displaying the drivers... n due to this, while flashing recovery using SP flash tool, the procedure gets stuck up at searching. Pls help.. thanks in advance...
Click to expand...
Click to collapse
Mediatek VCOM Drivers Check out here : http://forum.xda-developers.com/showthread.php?t=2206421
Important Note: Your phone should be OFF before connecting it to the computer, after pressing Download button in SP Flashtool. OFF means pull out battery and put it in again. This ensures the phone is OFF. If switched OFF phone is connected for charging/usb the phone turns ON; phone is not fully OFF even if nothing is shown on screen. So pull out battery. ONLY If you connect the OFF phone to computer you will be able to detect the device and install Mediatek Vcom drivers as well as use flashtool.
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
I still wonder how you got the recovery image...
My phone is rooted successfully thanks to your help, but I would love to learn more.
team.radiant said:
I still wonder how you got the recovery image...
My phone is rooted successfully thanks to your help, but I would love to learn more.
Click to expand...
Click to collapse
Follow step 7 of the thread I posted before: http://forum.xda-developers.com/showpost.php?p=38337401
In brief :
Generate ROM_ with SP FlashTool
Prepare ROM_ in MTK Droid Root & Tools
Build CWM
USB Drivers
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Can U Please Attach the USB Drivers For Karbon A26
mukesh kitty said:
Can U Please Attach the USB Drivers For Karbon A26
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
help
I flashed cwm but it doesn't reboot to recovery plz help,!!!!!
team.radiant said:
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Click to expand...
Click to collapse
hi bro
can u pls anyone share me the original "void.fstab" file of karbonn smart A26 mobile which willl be in system/etc folder...
As i tried swapping for low storage problem,from then it was corupted and now i want to replace it with original file as i havnt backuped it.
---------- Post added at 05:24 PM ---------- Previous post was at 04:39 PM ----------
team.radiant said:
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Click to expand...
Click to collapse
hi bro,can u pls give me karbonn a26 vold.fstab orginal file
Custom Recoveries are Here!
Gello! Karbonn A26 Users Here are the Custom Recoveries For Karbonn A26 Ported Be Me...
Includes:-
★Philz
★TWRP
★CWM
★Carliv
★Cannibal
etc...
Please Press Thanks If this Post Helped!
Here is the Download Link To The Thread :- :good:
★http://forum.xda-developers.com/android/development/karbonn-a26-custom-recoveries-t2828608★
Try VROOT
VROOT works with this device...
VROOT is very good software !!!!
download from my signature
:good::good::good::good::good::good:
How to install recovery.img ?
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Hello Friend, can you tel me how to install recovery image that you have generated?
How to increase incoming call volume in custom rom lollipop in karbonn a26
Dear All,
I have installed custom ROM lollipop in my karbonn A26.
but incoming ring volume is very low so please help me how to increase volume with Es file explorer or terminal command.
Hi all,
I have a Micromax A110 on which i flashed Ultimate+Galaxy+V4+-+Genuine+Note+3+++S5+UI ROM and BindaasBoost Kernel.
Playstore was not working on this since the ROM installation and it said No Connection always. As suggested by most people i tried some basic steps which didnt work and as final step i did a "Restore to factory Default". Since then the cell is not booting to ROM.(Bricked) :crying:
Its neither getting to CWM recovery as well. Its showing the Note3 logo and then restarts itself. When holding the Power+up+down keys its shows the First screen of recovery mode but soon again shows Note3 boot logo and reboots. Not able to do anything.
Please help Guys !!!
fastboot or adb
VickyPonting said:
Hi all,
I have a Micromax A110 on which i flashed Ultimate+Galaxy+V4+-+Genuine+Note+3+++S5+UI ROM and BindaasBoost Kernel.
Playstore was not working on this since the ROM installation and it said No Connection always. As suggested by most people i tried some basic steps which didnt work and as final step i did a "Restore to factory Default". Since then the cell is not booting to ROM.(Bricked) :crying:
Its neither getting to CWM recovery as well. Its showing the Note3 logo and then restarts itself. When holding the Power+up+down keys its shows the First screen of recovery mode but soon again shows Note3 boot logo and reboots. Not able to do anything.
Please help Guys !!!
Click to expand...
Click to collapse
Can you able to access fastboot or adb ?
Installing SDK ADT
Sakthivel_Subbiah said:
Can you able to access fastboot or adb ?
Click to expand...
Click to collapse
Downloading SDK ADT bundle to check that... (Fingers crossed)
Sakthivel_Subbiah said:
Can you able to access fastboot or adb ?
Click to expand...
Click to collapse
Not getting to ADB or Fastboot as well.. Please help !!!!
Eureka
OMG Finally got it to work.....
Flashing the stock ROM from sptools worked.
I had tried this very first at the beginning but it was not working because incorrect drivers for the cell were installed on my PC (PDANet and vcom)
I removed the incorrect MT65XX drivers using "usbdeview-x64" software.
And then installed the "MT6577 USB VCOM drivers"
then flashed the stock ROM via SPTOOLS and it worked fine..:good:
{ Gosh !!! This was so imp to work as its my WIFE's phone }
VickyPonting said:
OMG Finally got it to work.....
Flashing the stock ROM from sptools worked.
I had tried this very first at the beginning but it was not working because incorrect drivers for the cell were installed on my PC (PDANet and vcom)
I removed the incorrect MT65XX drivers using "usbdeview-x64" software.
And then installed the "MT6577 USB VCOM drivers"
then flashed the stock ROM via SPTOOLS and it worked fine..:good:
{ Gosh !!! This was so imp to work as its my WIFE's phone }
Click to expand...
Click to collapse
:good: always take a backup of your rom... if anything happens you can restore it congrats that you saved your phone...