Hi,
I'm a proud owner of a UMI X1s...anybody out there who wants to share information related to this phone?
I a found a custom rom to experiment with:
http://www.needrom.com/phone-roms/umi/umi-x1s/
ROM Android 4.2.1, Based on ROM Official UMI X1S Version: UMI X1S 20130520-220931
After some minor adjustments (Faster GPS to set the correct continent/region) and adding a keyboard app as input method (only Chinese from the beginning) everything seems to work fine...no crash and very stable...will continue testing and probably switch to this ROM http://www.needrom.com/mobile/umi-x1s-3/ . Does anybody know other custom ROM´s.
Known issues/problems:
- Custom recovery is Chinese (English would be great!)
- I´m not sure if GPS is reliable: sometimes fast fix…sometimes not
- Performance (Apex) could be a little bit more smooth (e.g unlock screen)
- WLAN signal/reach is ok but could a little bit stronger
What really impressed me:
- Design is cool, nice display, good responsiveness, good quality, gyro sensor
What I don’t / I have to get used to:
- No LED, the buttons (home, return, config) are not completely illuminated (only the stripes below them),
- back button sometimes seems to be lazy (does not react as fast or good as the other buttons)
Kind regards,
Floris
I also have an x1s.
It's not that the back button is lazy. I've noticed (and others too) that the real physical back button is slightly to the left of the back symbol printed on the case. Just touch there and it reacts as quickly as the other buttons.
About the GPS, I've also noticed the "now fast, now slow" behaviour, but first, you may need to set it up. One suggestion: go to Google Play Store and look for "Faster GPS". It's an app that creates a custom gps.conf file, based on the continent and region you choose. Since x1s comes rooted by default, you can use it right away, and it improves GPS performance.
Then, in order to fine tune the GPS, you need to access Engineer Mode. The best way to do it is from Mobileuncle Tools app. After entering Engineer Mode, go to the location tab and then YGPS. Go to information and click "Full", then "Cold" and then "AGPS restart". You should get a fix in a short time (unless you're indoors or have little coverage).
Anyway, I've tried Tomtom, Navfree and Sygic, and the latter was the one that performed best.
I have a problem, yet no one could give me a solution:
I can't get into/reach the CWM recovery: only the umi screen is visible whatever I try to do. Firstly I took out the battery to move on, then realised that the recovery may be running in the background cause when I press the power button it reboots, as it's the first item in the recovery to be accepted with the power button. I tried to set back/reinstall the original recovery but it's the same with that. What could be the solution?
mf01mf01 said:
I have a problem, yet no one could give me a solution:
I can't get into/reach the CWM recovery: only the umi screen is visible whatever I try to do. Firstly I took out the battery to move on, then realised that the recovery may be running in the background cause when I press the power button it reboots, as it's the first item in the recovery to be accepted with the power button. I tried to set back/reinstall the original recovery but it's the same with that. What could be the solution?
Click to expand...
Click to collapse
Your problem is not unknown. Looks like the latest UMI update, from May 28, is not good and causes that behaviour. The only solution is to install an older update. I did that, and then used one of the roms from Needrom. The update I used is from May 20 and can be downloaded here:
http://ul.to/q69qn8ui
Then go here and choose a rom which suits your needs: http://www.needrom.com/phone-roms/umi/umi-x1s/
jman0 said:
Your problem is not unknown. Looks like the latest UMI update, from May 28, is not good and causes that behaviour. The only solution is to install an older update. I did that, and then used one of the roms from Needrom. The update I used is from May 20 and can be downloaded here:
http://ul.to/q69qn8ui
Then go here and choose a rom which suits your needs: http://www.needrom.com/phone-roms/umi/umi-x1s/
Click to expand...
Click to collapse
Thanks, I'll try!
mf01mf01 said:
Thanks, I'll try!
Click to expand...
Click to collapse
Guys please can you check in your Umi X1s if it supports Greek Language ?
Thanks in advance
fsnelis said:
Guys please can you check in your Umi X1s if it supports Greek Language ?
Thanks in advance
Click to expand...
Click to collapse
I do not have.
fsnelis said:
Guys please can you check in your Umi X1s if it supports Greek Language ?
Thanks in advance
Click to expand...
Click to collapse
No, it doesn't support Greek. Maybe in the future in some custom rom.
Hi, does anyone know if it would be possible to port any of CyanogenMod ROM? Or any other custom ROM?
Syntaxer said:
Hi, does anyone know if it would be possible to port any of CyanogenMod ROM? Or any other custom ROM?
Click to expand...
Click to collapse
CM ROM: Not that I know of.
Other Custom ROM: Needrom
Nice to know that there are some other UMI X1s usere out there
For now I´m quite happy with this ROM http://www.needrom.com/mobile/umi-x1s-3/ ...anyone here tried the newer one?
I discovered that GPS comes quite fast I use YGPS (Mobile Uncle Tools)...even if I use the cold method...but if I use google maps it does not work or the fix takes very long :-/
Does anyone know, how to get GPS working?
In YGPS it says Status: UNAVAILABLE and blinking TTFF: Counting.
I modified gps.conf with FasterGPS to my region.
I have EPO and A-GPS enabled and I am using this ROM http://www.needrom.com/mobile/umi-x1s-3/
Syntaxer said:
Does anyone know, how to get GPS working?
In YGPS it says Status: UNAVAILABLE and blinking TTFF: Counting.
I modified gps.conf with FasterGPS to my region.
I have EPO and A-GPS enabled and I am using this ROM http://www.needrom.com/mobile/umi-x1s-3/
Click to expand...
Click to collapse
First, make sure you try it outdoors, 'cause indoors it may take a lot longer to fix a location, or not work at all.
In YGPS, the best way to do it is:
1) Go to the information tab and click "AGPS restart".
2) Click "Full"
3) Go to satellites tab and wait for the GPS to fix the location
4) After you get a fix, return to the information tab and click "Hot"
5) Close YGPS, and open your favorite GPS navigation software or GPS Status app, and see how fast the phone can fix the location. Now you should be able to get a fix in a few minutes maximum.
Thanks, it really helped me. Now GPS is working.
English CWM X1S
Hello is there allready an english CWM for the x1s?
If not then i will try create one if i have the time.
gommers1978 said:
Hello is there allready an english CWM for the x1s?
If not then i will try create one if i have the time.
Click to expand...
Click to collapse
Just Chinese CWM ATM
gommers1978 said:
Hello is there allready an english CWM for the x1s?
If not then i will try create one if i have the time.
Click to expand...
Click to collapse
It would be great to have recovery in English
English CWM
Hi!
Here is an english CWM. I've made it when i got my X1S.
You can use my file or make your own with MTKDroidTools software (you need the latest version for that)
View attachment UMI-X1S_130511__recovery_130601-154220.img
Just got my x1s how do you get into recovery? Tried volume up and power, tried Mobileuncle MTKtools tried usb cable connected an then volume up + power button nothing works...
On all my other MTK phones i had no problem getting in CWM???
I have the latest firmware and it does not work with the above english CWM only with the one from LEWA os wich is in Chinese.
UMI X1?
can this rom use on UMI X1?
Related
Hello,
I know this is not the first time this topic is brought, although it is usually part of an unrelated thread.
I have this AllWinner A10 mk802 , a strange device (it looks like a usb flash drive, but is an Android 4.0.4 computer on which you plug your own screen, mouse and keyboard, making it a Desktop PC on a stick running Android).
Not being a big fan of tablets, I thought I'd give it a try -- Android with a keyboard and a mouse (!). It doesn't look too bad even if it is not powerful enough for my tastes and I can't install CM9/10 on it because of the issue I'll bring here in a second. (In the meantime I installed Uberoid 1.2, which is the stock chinese Android 4.0.4 image which most of its cruft removed -- still doesn't feel right, though.)
There are experimental builds of CyanogenMod 9 and 10 for it, there is a ClockworkMod for it, but I can't use it: when I get into recovery mode, I get a visually awkward-looking (see http://i.imgur.com/Nchso.png ) CWM screen, which wouldn't be a problem if I were able to move through the menus. I've tried with three different mice, three different keyboard, the only thing I was able to do was to flash the screen (it turns black 2 ou 3 seconds) and that's all.
Now, I'm almost there. I just need to be able to wipe the existing system, install CM10, its support (legacy) file and GApps. For that, all I have to do is a dozen of key presses. But I think that I've tried everything.
Has anyone here fought this or a similar issue and won? If so, how did you proceed?
Thanks!
cpl593h said:
Hello,
I know this is not the first time this topic is brought, although it is usually part of an unrelated thread.
I have this AllWinner A10 mk802 , a strange device (it looks like a usb flash drive, but is an Android 4.0.4 computer on which you plug your own screen, mouse and keyboard, making it a Desktop PC on a stick running Android).
Not being a big fan of tablets, I thought I'd give it a try -- Android with a keyboard and a mouse (!). It doesn't look too bad even if it is not powerful enough for my tastes and I can't install CM9/10 on it because of the issue I'll bring here in a second. (In the meantime I installed Uberoid 1.2, which is the stock chinese Android 4.0.4 image which most of its cruft removed -- still doesn't feel right, though.)
There are experimental builds of CyanogenMod 9 and 10 for it, there is a ClockworkMod for it, but I can't use it: when I get into recovery mode, I get a visually awkward-looking (see http://i.imgur.com/Nchso.png ) CWM screen, which wouldn't be a problem if I were able to move through the menus. I've tried with three different mice, three different keyboard, the only thing I was able to do was to flash the screen (it turns black 2 ou 3 seconds) and that's all.
Now, I'm almost there. I just need to be able to wipe the existing system, install CM10, its support (legacy) file and GApps. For that, all I have to do is a dozen of key presses. But I think that I've tried everything.
Has anyone here fought this or a similar issue and won? If so, how did you proceed?
Thanks!
Click to expand...
Click to collapse
I just got one also and have found a forum that is pretty comprehensive. I am doing a lot of reading before I jump to it. Try here:
http://www.rikomagic.co.uk/forum/index.php
Let me know how it goes as I am sure to root and flash CM10 as soon as some one gets it figured out.
Mac N Ts Daddy said:
I just got one also and have found a forum that is pretty comprehensive. I am doing a lot of reading before I jump to it. Try here:
http://www.rikomagic.co.uk/forum/index.php
Let me know how it goes as I am sure to root and flash CM10 as soon as some one gets it figured out.
Click to expand...
Click to collapse
I have dug this site also and wasn't able to find anything (or anything actually working) for my CWM problem. If you find something there that helps you, please share.
Thanks!
I have the same issue, Maybe someone can make Livesuit .img from the CM9/10 packages and compatible gapps and comp zips?
I just got a MK802 for testing and if it works fine with CM I will keep it or even better get a new one, but I am dealing with the same issue, the mouse/keyboard entry reboots the recovery, as if any movement is an enter and reboots the MK into recovery...
If anyone of you guys were able to fix this I would appreciate the info..
LuciusK said:
I just got a MK802 for testing and if it works fine with CM I will keep it or even better get a new one, but I am dealing with the same issue, the mouse/keyboard entry reboots the recovery, as if any movement is an enter and reboots the MK into recovery...
If anyone of you guys were able to fix this I would appreciate the info..
Click to expand...
Click to collapse
+1
Hi all.
I had the same problem.
My mouse works perfectly in both versions of stock MK802+ firmware, but in CWM it switches the screen off for a few seconds every time I move it. The same is happening with my keyboard, so I am struggling to flash cyanogenmod.
SOLUTION:
I changed the mouse to a wireless one (not bluetooth, but standard 2.4), I had lying around and it worked fine.
I think it's because the first mouse I tried has a laser pickup which draws more power or maybe its just a cwm driver issue.
The keyboard and mouse I originally used are quite fancy gaming products, so maybe they are just too "high-tech" for Clockword Mod.
Cheers
Steve
CWM video anomaly on MK802
Hey Everyone !
XDA noob here but I've been modding my junk for several years now since HTC Eris.
I'm having the exact same problem as cpl593h, screenshot is identical.
I wanted to use TWRP, I love that recovery -best thing in device modding ever IMHO, but I can't see anythig about mouse support. It's all touchscreen I guess. I tried GooManager but it were a no go. Still trying to find a recovery alternative to CWM. I know it's been around a long time but I've had more trouble with it that successes.
If I find a workaround, I'll post it here!
CyberCorgi3K
CM10 livesuit image
avishayil said:
I have the same issue, Maybe someone can make Livesuit .img from the CM9/10 packages and compatible gapps and comp zips?
Click to expand...
Click to collapse
hey there,
btsimonh from miniand.com managed to make a livesuit compatible .img of CM10. What's also included is zulu99's work of including droidmote compatibility. So no need to struggle with CWM any more.
Simon said that he will put some efforts in optimizing the ROM further.
So if there's any progress, I'll post that.
Sadly, as a new user, I'm still not allowed to post some links.
So I guess it's good to PM me until I reached URL posting threshold.
cpl593h said:
Hello,
I know this is not the first time this topic is brought, although it is usually part of an unrelated thread.
I have this AllWinner A10 mk802 , a strange device (it looks like a usb flash drive, but is an Android 4.0.4 computer on which you plug your own screen, mouse and keyboard, making it a Desktop PC on a stick running Android).
Not being a big fan of tablets, I thought I'd give it a try -- Android with a keyboard and a mouse (!). It doesn't look too bad even if it is not powerful enough for my tastes and I can't install CM9/10 on it because of the issue I'll bring here in a second. (In the meantime I installed Uberoid 1.2, which is the stock chinese Android 4.0.4 image which most of its cruft removed -- still doesn't feel right, though.)
There are experimental builds of CyanogenMod 9 and 10 for it, there is a ClockworkMod for it, but I can't use it: when I get into recovery mode, I get a visually awkward-looking (see /*NO LINKS*/ ) CWM screen, which wouldn't be a problem if I were able to move through the menus. I've tried with three different mice, three different keyboard, the only thing I was able to do was to flash the screen (it turns black 2 ou 3 seconds) and that's all.
Now, I'm almost there. I just need to be able to wipe the existing system, install CM10, its support (legacy) file and GApps. For that, all I have to do is a dozen of key presses. But I think that I've tried everything.
Has anyone here fought this or a similar issue and won? If so, how did you proceed?
Thanks!
Click to expand...
Click to collapse
Hi2all!
I have exact the same problem with device "appolo-mele" (allwiner a10 platform) - graphics looks to bad, also when i try to switch menu entry - screen turns off and then turns on (on next menu entry), but CWM works fine (backup and restore functions).
I tried:
1. CWM for Allwiner A10 ("CWM 6.0.2.8 for Allwinner A10 & A13 Tablets - v2a") - "graphics problem"
2. Some other CWM 5... and 6... versions for Allwiner A10.
3. Build cwm recovery from sources, using native boot.img, following the "[GUIDE] Build CWM recovery " by buffo1987 and "[GUIDE] Compile CWM Recovery" by Shaaan. - "graphics problem", anything else works fine.
Here is some info about device:
1. It is a TV Box device with HMDI, WiFi, LAN, SPDIF optical audio out and AV-TV out ("3.5 4contact jack in device to 3 tulip connectors to TV"), 2 usb
2. Complied 6.0.3.7 CWM
3. cpuinfo: ARMv7Processor rev 2 (v71) , sun4i
4. other info is similar to "Rikomagic MK802+"
Maybe I should try to use custom "graphics.c"?
Can some help me with my problem?
Attached is the latest version of the recovery file.
Hello. i want to ask if someone have Clockwork mod or some custom firmware on Prestigio PMP5670c Android 4.1.1.
I managed to root it, but i realy dont like this Android version and Prestigio is not intrested in upgrading.
Hey can someone make a recovery for this tablet.
Sent from my PMP5670C_DUO using xda premium
Shawes said:
Hello. i want to ask if someone have Clockwork mod or some custom firmware on Prestigio PMP5670c Android 4.1.1.
I managed to root it, but i realy dont like this Android version and Prestigio is not intrested in upgrading.
Click to expand...
Click to collapse
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Touch chip is Goodix GT911, screen size is 800x1280 px. I managed to get touch working but partialls. First aprox 1.2 inches of top of screen are not responsive to to touches. After that 1.5" touch works normally.
I'm pretty sure I'm sending wrong configuration data array to chip and thats why its not working as it should, but have no time at the moment to toy with it. If anyone experienced with Goodix chips, pm me with ideas...
stane1983 said:
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Touch chip is Goodix GT911, screen size is 800x1280 px. I managed to get touch working but partialls. First aprox 1.2 inches of top of screen are not responsive to to touches. After that 1.5" touch works normally.
I'm pretty sure I'm sending wrong configuration data array to chip and thats why its not working as it should, but have no time at the moment to toy with it. If anyone experienced with Goodix chips, pm me with ideas...
Click to expand...
Click to collapse
Update: I started to toy with stock kernel and cm10.2 (my first CM ever, was working with AOSP based SoC manufacturers sources). Problem is that device uses separate partition for internal sdcard, so have to disable emulated storage.
Things done:
- recovery
- android is built against precompiled stock kernel
Status:
- after bootanim and starting apps screen android reboots and starts back with bootanim. This was one day tryout, will debug it later today. Thanx to TeamNostalgia's preparation for cm10.2 on Amlogic MX. I used their framework and device stuff, upgraded with latest amlogic version of sources. Because of SLA I have with Amlogic, I cannot put it online.
any news abouth root final this tablet?
thx for info
stane1983 said:
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Click to expand...
Click to collapse
klobasica said:
any news abouth root final this tablet?
thx for info
Click to expand...
Click to collapse
On the link abouve is posted rooted stock firmware (mine post). To lazy ones click here
no, no...sorry i mean custom rom if is posable to create for this tablet...
klobasica said:
no, no...sorry i mean custom rom if is posable to create for this tablet...
Click to expand...
Click to collapse
It is. I'm not CM guy really, but its possible. If anyone interested, TeamNostalgia's github does have decent tree for Amlogic MXS tablets. I did some CM10.2 work for that tablet, but ended up with bootloop and reboot eventually. Didn't had time do debug it.
Here 4pda.ru/forum/index.php?showtopic=504411&view=findpost&p=29560411 is a customized firmware from Prestigio PMP3970B to work on Prestigio PMP5670C. But it does not run on PMP5670C, stands on the splash screen. Maybe someone will take to complete the firmware, it is better factory firmware for the tablet PMP5670C
ksh2000 said:
Here 4pda.ru/forum/index.php?showtopic=504411&view=findpost&p=29560411 is a customized firmware from Prestigio PMP3970B to work on Prestigio PMP5670C. But it does not run on PMP5670C, stands on the splash screen. Maybe someone will take to complete the firmware, it is better factory firmware for the tablet PMP5670C
Click to expand...
Click to collapse
I fixed U-Boot (wrote my own to support device tree kernel - 3.10.10) and fixed touch screen. I did not upload this fw, started to work yesterday on amlogic's 4.4 sources (they support both mx and m8 chipsets) (no, I cant share, I have SLA with them), I have boot, only left few things to test and then I'll upload 4.4.2.
Thank you for keep working! Waiting for rom)
Sent from my GT-I5510 using xda app-developers app
cyanodeff said:
Thank you for keep working! Waiting for rom)
Sent from my GT-I5510 using xda app-developers app
Click to expand...
Click to collapse
Here's beta version of rom: http://www.stane1983.com/prestigio_pmp5670c/
Read install instructions, needs to be installed twice, uboot still not perfect. Waiting for feedback
Btw, it's 4.2.2 rom, KitKat doesn't work good (unstable) on MXS chip.
Installed today morning. Seems all good! Thank you very much
Sent from my GT-I5510 using Tapatalk 2
babicsbalu said:
Unfortunatelly I can not able to install it because the second install is freezing all the time, now I can not install official 1.0.0.5 ROM, it stucked during the installation.
Click to expand...
Click to collapse
Rename uImage_recovery to recovery.img (when installing back stock firmware).
babicsbalu said:
Now I successfully installed the 1.0.05 but there is a quite big issue: I can not able to install anything from Play, the Download Manager is acutally (lots of system apps too) 0.0kb
Click to expand...
Click to collapse
I'm really sorry for inconveniences. With 1.0.05 files on sdcard, delete factory_update_param.aml file and boot into recovery (as if you want to install firmware). From menu using vol +/- and power for select choose factory reset (data partition is not formatted using old partition layout, thats why you have 0kb). After that you also can reflash firmware if you want (just select zip from sdcard).
stane1983 said:
Here's beta version of rom: http://www.stane1983.com/prestigio_pmp5670c/
Read install instructions, needs to be installed twice, uboot still not perfect. Waiting for feedback
Btw, it's 4.2.2 rom, KitKat doesn't work good (unstable) on MXS chip.
Click to expand...
Click to collapse
My daughter get this tablet from her grandfather on 03.05.2014 ( I guess she is lucky about that date ), and it was so slow and ugly and everything.
I installed your bety rom and everything is perfect. BUt after first reboot i get setup wizard again, but the first time after Install I only get FC ( just like I should ) but it didnt throw me back to setup wizard again.
Can I expect wizard setup every time I reboot or?
And Yes, thank you a lot for this awesome and fast work. The tablet is now so much more usable.
HVALA TI STANE MNOGO => THANK YOU STANE A LOT
@stane1983 I have the same problem as @babicsbalu. My pmp5670c is also stuck at black screen after rebooting and installing new stock firmware. I did both, renaming from uImage_recovery to recovery.img and deleting factory_update_param.aml and every time with the same result.
Please help me!
Or you can PM me (I'm from Croatia)
Hvala ti!
Well I also have prestigio tablet pmp5670C_BK_DUO and within a week it got bricked somehow. I guess that broken charging pin on cable had something to do with it - probably did a short circuit or something and boot loader got corrupt. Tabled was responding to connection of new charging cable, but only backlight turned on. There was no logo or anything.
I browsed several pages and nothing worked. I tried with official upgrade from SD card but it didn't work. It started to upgrade, android-upgrade logo came up, but after reboot nothing happened. Damaged bootloader was unable to start the tablet.
After a day or so I finally found a way how to unbrick it! Yeah.... So in attached file there is the detailed procedure, which I found on some Russian page.
Good luck!
Recovery.rar no longer available
imarkic said:
Well I also have prestigio tablet pmp5670C_BK_DUO and within a week it got bricked somehow. I guess that broken charging pin on cable had something to do with it - probably did a short circuit or something and boot loader got corrupt. Tabled was responding to connection of new charging cable, but only backlight turned on. There was no logo or anything.
I browsed several pages and nothing worked. I tried with official upgrade from SD card but it didn't work. It started to upgrade, android-upgrade logo came up, but after reboot nothing happened. Damaged bootloader was unable to start the tablet.
After a day or so I finally found a way how to unbrick it! Yeah.... So in attached file there is the detailed procedure, which I found on some Russian page.
Good luck!
Click to expand...
Click to collapse
I had a similar problem here and this method seems promising, but the recovery file indicated on the PDF is no longer available. Would you still have it lying around somewhere?
Thank you!!
PMP5670c Duo
I got this tablet 2 month ago, i have found on w w w 4pda ru 4 custom rooms for this tablet and i used google chrome to translate in english to understand what i have to do, i have instaled every one rom but i got a problem, with all custom rom the internal storage disapear. I instaled stock version now and the internal storage is there ready to be used. Custom roms are better than stock rom but it's annoyng me the missing internal storage. Anyone with this problem or anyone know how to fix it?
Edit: I instaled stock rom then i instaled again Firmware v.1.0.10 from MrCheba Repack and now i have internal storage working maybe reinstall the stock rom fix it.
[Q&A] [ROM][Exynos][SM-P901][KitKat-4.4.2][XXUANI1][Aroma]CraftWorks v1.0[2014/11/27
Q&A for [ROM][Exynos][SM-P901][KitKat-4.4.2][XXUANI1][Aroma]CraftWorks v1.0[2014/11/27]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Exynos][SM-P901][KitKat-4.4.2][XXUANI1][Aroma]CraftWorks v1.0[2014/11/27]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Where developers rightful
Unfortunately there is a new The rom Official much better
We wish to support this device Online version lollipop or 4.4.4 or 5.0 Where
alhgan2014 said:
Unfortunately there is a new The rom Official much better
We wish to support this device Online version lollipop or 4.4.4 or 5.0 Where
Click to expand...
Click to collapse
Uh...could you rephrase your question?
4.4.4/5.0 is not out yet. When it is available I will provide a custom ROM.
Thanks for your nice rom!!!!! Excellent
but the wi-fi does not work as there is no root, which is a pity !!!
Quadds said:
Thanks for your nice rom!!!!! Excellent
but the wi-fi does not work as there is no root, which is a pity !!!
Click to expand...
Click to collapse
Please explain...the ROM is rooted. I am using it on my 901.
The wifi works also.
gcrutchr said:
Please explain...the ROM is rooted. I am using it on my 901.
The wifi works also.
Click to expand...
Click to collapse
Waiting next version....
thank u for making this rom for SM-P901
i already download and install this rom
the issue is same, the wifi, mine is a bit funny
after install, wifi works and all, but after a restart, it forgot the wifi password
so i have to type again the wifi password (same wifi as before)
i try wipe and install several times, its still the same problem
and also the aroma installer, it didnt install after the browser selection
i pick chrome, it didnt install
and everything after that selection, like ad free, adobe, etc also didnt install
but that part i can install myself, no problem
only the wifi which i find it annoying to always type the same password after restart
thank u so much for making this rom
16person said:
thank u for making this rom for SM-P901
i already download and install this rom
the issue is same, the wifi, mine is a bit funny
after install, wifi works and all, but after a restart, it forgot the wifi password
so i have to type again the wifi password (same wifi as before)
i try wipe and install several times, its still the same problem
and also the aroma installer, it didnt install after the browser selection
i pick chrome, it didnt install
and everything after that selection, like ad free, adobe, etc also didnt install
but that part i can install myself, no problem
only the wifi which i find it annoying to always type the same password after restart
thank u so much for making this rom
Click to expand...
Click to collapse
Thanks for the feedback. Will look into the issues.
Update: Did you wait for the all the apps to install? I mentioned this is 2 places: 1) On the XDA web page 2) at the end of the user-selectable install (in the Aroma installer). You have to wait for the system to auto reboot before you manually reboot. Apps are being installed during and after the initial ROM setup. It can take up to 5 minutes for the apps to install depending on how many you selected. The apps are really installed using Android Package Manager (pm) - this is to get a good clean install of the selected apps.
Update 2: Check this link out - may help with wifi passwords => Lost Wifi password after reboot
Hope it helps.
Did you do a data wipe before installing ROM? If not, I would suggest you do a wipe then install the ROM to see if it saves Wifi passwords after reboot. All my testing has been done this way.
I had the same thing , but first just did not work wi-fi , and then began to turn off when you set up Google account.
camera issue
Dear my friend
I was installed this rom but camera doesn't work..!
Do you have any solution this problem?
or what do you advise me?
Thanks
---------- Post added at 10:24 AM ---------- Previous post was at 10:10 AM ----------
Dear Onur
i have same problem,because in Turkey registered device SM P902. Actuality we are change it activated phone specification
I think that on the recovery installed sm P901 rom ,like a me)
yes phone is active .But camera doesn't work.
We are waiting solution. ..
camera issue
Dear my frend
My problem ; in Turkey registered device SM P902. (sm p-902 lock gsm version by software) Actuality i was installed change it activated phone specification and i did it on the recovery installing your rom, well done. no problem. yes phone is active .But camera doesn't work.
Do you have any solution this problem?
or what do you advise me?
We are waiting solution. ..
thanks for helpfull.
camera-wifi-gsm line
Koray anarlar said:
Dear my frend
My problem ; in Turkey registered device SM P902. (sm p-902 lock gsm version by software) Actuality i was installed change it activated phone specification and i did it on the recovery installing your rom, well done. no problem. yes phone is active .But camera doesn't work.
Do you have any solution this problem?
or what do you advise me?
We are waiting solution. ..
thanks for helpfull.
Click to expand...
Click to collapse
Hi Dear Koray
Also my device SM-P902 too and i already downloaded craftworks rom from this site but after download i got the problem camera-wifi-3g line.My mean camera doesnt work wifi is not stabilise also dont remembering wifi passwords because of this i have to write all the connection time,finally my device is behaving like a dont have sim place because of this dont asking sim pin code.
If you have a possibilit please send your boot and recovery img files for make download to my device.
Thanks regards
no sim card
gcrutchr said:
Thanks for the feedback. Will look into the issues.
Update: Did you wait for the all the apps to install? I mentioned this is 2 places: 1) On the XDA web page 2) at the end of the user-selectable install (in the Aroma installer). You have to wait for the system to auto reboot before you manually reboot. Apps are being installed during and after the initial ROM setup. It can take up to 5 minutes for the apps to install depending on how many you selected. The apps are really installed using Android Package Manager (pm) - this is to get a good clean install of the selected apps.
Hope it helps.
Did you do a data wipe before installing ROM? If not, I would suggest you do a wipe then install the ROM to see if it saves Wifi passwords after reboot. All my testing has been done this way.
Click to expand...
Click to collapse
Hello gcrutchr
Thank you for the p901 rom.
It works great. I don't have any Wifi password problem or camera problem till I installed.
But as I hardreset my sm-p901 wifi & 3G (actually it's sm-p902 model in Turkey) I lost the original p901 kernel. So I installed p900 kernel and craftwork rom for p901. Because of that I can see the mobile data icon but when I push the mobile data button it says no sim(a working data sim is inserted by the way). This is because the kernel for p900 that I have to install . There are no stock or custom kernels for p901 on the internet. So is there any chance that you can develop a p901 stock kernel OR is there any way that I can enable the 3g Mobile data in the kernel for p900.
Best
thesin2 said:
Hello gcrutchr
Thank you for the p901 rom.
It works great. I don't have any Wifi password problem or camera problem till I installed.
But as I hardreset my sm-p901 wifi & 3G (actually it's sm-p902 model in Turkey) I lost the original p901 kernel. So I installed p900 kernel and craftwork rom for p901. Because of that I can see the mobile data icon but when I push the mobile data button it says no sim(a working data sim is inserted by the way). This is because the kernel for p900 that I have to install . There are no stock or custom kernels for p901 on the internet. So is there any chance that you can develop a p901 stock kernel OR is there any way that I can enable the 3g Mobile data in the kernel for p900.
Best
Click to expand...
Click to collapse
Unfortunately, I am not a kernel developer. The only thing I can do is provide a stock kernel fo XXUANK2. All I have done to the kernel is add a few lines to the ramdisk for superuser functionality. If you want to try a stock kernel (no mods), let me know and I will package an installable stock P901 kernel.
901 kernel
If you can provide stock kernel for p901 that would be great.
If you can make recovery flashable kernel that's enough for me. I only need to work 3g. other parts of your rom works great
thesin2 said:
If you can provide stock kernel for p901 that would be great.
If you can make recovery flashable kernel that's enough for me. I only need to work 3g. other parts of your rom works great
Click to expand...
Click to collapse
Will post a recovery installable stock P901 kernel when I get home later today.
901 kernel
Thank you so much. I'm waiting
thesin2 said:
Thank you so much. I'm waiting
Click to expand...
Click to collapse
Attached is a stock P901 kernel which you can install through recovery.
Note: you will lose root with this kernel - but - you can use Chainfire's SuperSu v2.40 to get root back.
Mega: XXUANK2_kernel_stock.zip
Gcrutchr
Thank you my friend. I installed the kernel and it worked perfect.
The camera the wifi and 3G is working at the moment.
It didn't change the root but in any case I installed the chainfire supersu again.
Thank you again for your support
Best
thesin2 said:
Gcrutchr
Thank you my friend. I installed the kernel and it worked perfect.
The camera the wifi and 3G is working at the moment.
It didn't change the root but in any case I installed the chainfire supersu again.
Thank you again for your support
Best
Click to expand...
Click to collapse
I am happy yo hear things worked out for you.
Hi. I just flashed the latest BlissPop on my SM-T530 and I have two Problems.
1. I´ve changed the LCD-Density to 160 just to see how it looks like and now I can´t get back to 200. If I open the Avanced Display settings, LCD density shows 200 DPI but that´s not true. Changing the settings seems not to work anymore. How can I get back to 200 DPI?
2. The camera is not working at all. Not just the back-camera.
- The resolution seems to be wrong. Everything is "streched"
- The menu is always in the wrong position if hold the tab crosswise. If I hold the tab upright, the menue doesn´t appear at all.
With the Google-Camera-App, I do not have these two problems. I can even take Pictures with the front-camera (back-camera stocks immediately after activation. I can see a dark picture. With the default-app, there is nothing to see at all. If I change to video, it seems that the front an also the back camera works fine. But although the device indicates to me that it takes up a video, no video is beeing saved.
Is there any way to fix these two problems? Or is there a other lollipop-rom, where the camera works?
If not, how can I flash the [TW][5.02][ROM]T530 ,T530NU,T531,T535 LP deodex 4pda teamwork , Xposed [03.06.2015]? Just download an flash with twrp? I´m a little bit afraid, i could brick my device...
Thank´s for your help
Jule_666 said:
Hi. I just flashed the latest BlissPop on my SM-T530 and I have two Problems.
1. I´ve changed the LCD-Density to 160 just to see how it looks like and now I can´t get back to 200. If I open the Avanced Display settings, LCD density shows 200 DPI but that´s not true. Changing the settings seems not to work anymore. How can I get back to 200 DPI?
2. The camera is not working at all. Not just the back-camera.
- The resolution seems to be wrong. Everything is "streched"
- The menu is always in the wrong position if hold the tab crosswise. If I hold the tab upright, the menue doesn´t appear at all.
With the Google-Camera-App, I do not have these two problems. I can even take Pictures with the front-camera (back-camera stocks immediately after activation. I can see a dark picture. With the default-app, there is nothing to see at all. If I change to video, it seems that the front an also the back camera works fine. But although the device indicates to me that it takes up a video, no video is beeing saved.
Is there any way to fix these two problems? Or is there a other lollipop-rom, where the camera works?
If not, how can I flash the [TW][5.02][ROM]T530 ,T530NU,T531,T535 LP deodex 4pda teamwork , Xposed [03.06.2015]? Just download an flash with twrp? I´m a little bit afraid, i could brick my device...
Thank´s for your help
Click to expand...
Click to collapse
1.LCD-DPI changes fine .
2.Camera is known problem
3. If you want you install T530 deodex rom simply by Odin
LIGHT new version for Odin (only full wipe and flash via Odin) https://www.androidfilehost.com/?fid=24052804347840578
or in odinary method via custom recovery
repey6 said:
1.LCD-DPI changes fine .
2.Camera is known problem
3. If you want you install T530 deodex rom simply by Odin
LIGHT new version for Odin (only full wipe and flash via Odin) https://www.androidfilehost.com/?fid=24052804347840578
or in odinary method via custom recovery
Click to expand...
Click to collapse
Ok, thank you for your answer. So simply flashing LIGHT new version via twrp should work (I´m asking just to be 100 % sure)?
Ok, it worked with twrp. Unfortunately, the stock Rom 5.0.2 (also the deodexed version) has a lot of lags. For example, piano tiles 2 ist not playable because of the lags (delayed reaction). Bad work from Samsung... So I switched back to BlissPop, which runs absolutely smooth.
I hope, the work on the camera-bug is in progress and that it will be fixed.
I have another issue.
I thought, everything except the camera works fine but one of my apps crashes just after starting it. It's my NAS-App so I use it very often. Zyxel ZCloud. On Stock rom it works fine and it seems, that it normaly works on 5.1.1. So can this be a BlissPop-issue? Is there a way to find out why the App crashes? Can I create a debug-log somehow?
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
I'm using nano/pico gapps.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
Almost all
Known Issues
- video record
Links
1. 20200229: initial build: https://drive.google.com/file/d/1_JE8xGHpAqd9JQ-Trd4p3TazqLGWZ83k/view?usp=sharing
Gapps
https://opengapps.org
Recovery
Official version is too old and will not work with latest lineage builds (theoretically you can remove first 2 lines from "\META-INF\com\google\android\updater-script" and install using official). I made repack of more fresh twrp recovery. Only one problem here: after turn-off screen, it cannt turn-on again. Hold volume up + power + home combination untill you back to recovery. Or you can in recovery in settings disable screen timeout.
for recovery: https://drive.google.com/file/d/1eIrN8byqXx5qSfQ2iXTVXbTKSe11eWM5/view?usp=sharing
for odin: https://drive.google.com/file/d/1uezAZWPp9G5EIiuQZYveZY8465UYCBKw/view?usp=sharing
Sources
Sources: https://github.com/Lineageos
Device: https://github.com/Valera1978/android_device_samsung_picassolte
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8974
Vendor: https://github.com/Valera1978/android_vendor_samsung_picassolte
Thanks
Thanks to LineageOS team
Just updated from lineage-13.0-20190417. Everything I use daily seems to work. (I don't use phone/LTE, BT or Camera). Extra bonus: The capacitive buttons lit up for the first time in years.
The only issue I've found so far is that auto-rotate sometimes stops working.
Huge thanks to @Valera1978 for keeping our device alive!
deleted
Awesome. Is there a way, to get this on t520 too?
Gesendet von meinem SM-T520 mit Tapatalk
ChilliBo said:
Awesome. Is there a way, to get this on t520 too?
Click to expand...
Click to collapse
Not very likely. T320, T325 and T525 have Qualcomm Snapdragon SoC's inside, so most of the codebase can be shared between them. T520 has Exynos which is a totally different beast.
And, yes, it's a brilliant ROM. Been my daily driver since my first post to this thread despite the problems with auto-rotation. I'm using the "Rotation Control" app, which makes it just a minor annoyance.
Unbelievable! Thank you very very much! Everything works. Feels like a new tablet!
Are you also working on Android 10?
Thanks a lot for this ROM!!! I just have a problem with Skype: in every call the other person doesn`t hear me. Sound recording - however - works. What can I do?
elcampesino said:
Skype: in every call the other person doesn`t hear me. Sound recording - however - works. What can I do?
Click to expand...
Click to collapse
This fix posted in the LOS16 for T320/T325 thread might work:
https://forum.xda-developers.com/showpost.php?p=82325901&postcount=176
M0lle said:
This fix posted in the LOS16 for T320/T325 thread might work:
https://forum.xda-developers.com/showpost.php?p=82325901&postcount=176
Click to expand...
Click to collapse
Thanks for your hint. Unfortunately, it didnt work for me. However the reason might be, that I am really a beginner on LineageOS and patching Android devices.
I copied the file (mixer_paths.xml) and edited the build.prop with "build.prob.editor".
Result is, that there is no sound at all any more, what remains even after restoring the old data.
Can someone help me?
deleted
elcampesino said:
Thanks for your hint. Unfortunately, it didnt work for me. However the reason might be, that I am really a beginner on LineageOS and patching Android devices.
I copied the file (mixer_paths.xml) and edited the build.prop with "build.prob.editor".
Result is, that there is no sound at all any more, what remains even after restoring the old data.
Can someone help me?
Click to expand...
Click to collapse
Ok, I managed to fix it.
Just change in /system/build.prop the value from vendor.dedicated.device.for.voip=true
to vendor.dedicated.device.for.voip=false.
And then Skype works with microphone!
Best regards!
Installed today, works like a charm, even SD card is detected on startup.
Thank you for giving my 3 devices (T320, T325, T525) a new life!
elcampesino said:
Ok, I managed to fix it.
Just change in /system/build.prop the value from vendor.dedicated.device.for.voip=true
to vendor.dedicated.device.for.voip=false.
And then Skype works with microphone!
Best regards!
Click to expand...
Click to collapse
this advice helped. thank you author
[email protected] said:
this advice helped. thank you author
Click to expand...
Click to collapse
Does someone use mobile Internet on this firmware? For unknown reasons, the sim card is lost. On the drain this was not. helps (not always) switching to airplane mode and subsequent reboot
deleted
Thank you for this ROM. It's quite stable.
However, auto rotation is not always working.
Looking forward to the Android 10 ROM for T525 ?
Abb4d0n said:
However, auto rotation is not always working.
Click to expand...
Click to collapse
That's the only small issue I have with this ROM. With Rotation Control, though, it's more than manageable.
Hi
I have a T525 which was running android 4.4 . I am a newbie and manage to change the TWRP and install the above version of LineageOS however I am struggling to find a version of GApps that works. Can anyone point me in the right direction.
Thanks
Rob
rob46 said:
I am struggling to find a version of GApps that works.
Click to expand...
Click to collapse
Open GApps Pico has worked very well for me with both 16.0 and 17.1.
Platform: ARM
Android: 9.0
Variant: Pico
Nano should be ok as well. Just avoid any variant which installs the Pixel Launcher. I had huge problems with it when I initially flashed Stock GApps with 16.0. Since then I've gone with Pico with zero problems.
P.S. Why would you want to install 16.0 when 17.1 is available with frequent (= monthly) updates? I'm fairly sure @Valera1978 won't be pushing out another version of 16.0. The latest available version is from February.
I have a question, it's more convenient install this build or the android q build? which one of theese will be much supported?