Hi People!
Was going through the steps of the 'The Overcome ROM: The Installation Guide v 1.6.4' but cannot do anything once my tab is in the 'Download Mode'. How do I go to the folder where I've extracted the JMK-stock-safe.zip when I cannot seem to do anything in this mode?
Choc
hello all , i'm new member and this is my first post , so i'm sorry if i write it in a wrong place !!
i have Samsung vibrant T959 " T-MOBILE "
i try to install rom by using rom manager the mobile restart and stuck in black screen after boot logo end !!
so i try to flash it using ODIN with T959UVJFD.tar && s1_odin_20100512.pit .
after ODIN complete flashing i get MBR checksum error !!!
after searching to fix this problem i flash my Samsung with Eugene_2E_JK2_Froyo && s1_odin_20100512.pit , i get the same error but the vibrant is booting well !!
when i trying to download any app from the market a notification appear that there is no enough space !!!!!
i check the SD card and phone storage i found
phone storage \ total space :14,63GB >>>>>>>> available space 14,63GB >>>>>> application storage is 0.00B
help me please what i can do ???!!!
Today i want follow this http://forum.xda-developers.com/showthread.php?t=1378469 to flash rom with my i9023...but after i hv done "From mounts and storage select format /boot", i can't find anythings in my sdcard...i can't flash rom....AND I CAN"T RESTART MY MOBILE.....when i just restart...its enter bootloader automally....what should i do now...please help me please
..
I can enter recovery mode.but when i select install zip from sdcard,its said no files found.....
..
oh.i find that. i think i can solve the problems now. thankyou......
..
*******************Israr Ahmed Khan **************************
Download attached
If I9505 Samsung I9505 is showing only Download mode no recovery no boot it is a great technique to
boot and satart again
First of all you need to install all required driver
Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
Step 3.. Choose Bootloader file "cache.img.ext4.tar"
step 4.. Choose PDA "philz_touch_6.00.0-i9505.tar.md5"
if it is fail even after completing no problem just remove battery Hold Volume Down
and recovery Mode is there .
If above process fails
Try This
Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
step 4.. Choose PDA "philz_touch_6.00.0-i9505.tar.md5"
it will definetly fail But try and try again by removing cabel just need to complete the recovery flash Progress
even it is showing failed
Just remove Battery and Do this
Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
Step 3.. Choose Bootloader file "cache.img.ext4.tar"
It will Definetly Pass
After Restart Hold Volume Down and recovery Mode is there .
Put any Rom Better if cm-12-20150301-NIGHTLY-jfltexx and Gapps
Done It
*******************Israr Ahmed Khan **************************
israr0333 said:
*******************Israr Ahmed Khan **************************
Download attached
If I9505 Samsung I9505 is showing only Download mode no recovery no boot it is a great technique to
boot and satart again
First of all you need to install all required driver
Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
Step 3.. Choose Bootloader file "cache.img.ext4.tar"
step 4.. Choose PDA "philz_touch_6.00.0-i9505.tar.md5"
if it is fail even after completing no problem just remove battery Hold Volume Down
and recovery Mode is there .
If above process fails
Try This
Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
step 4.. Choose PDA "philz_touch_6.00.0-i9505.tar.md5"
it will definetly fail But try and try again by removing cabel just need to complete the recovery flash Progress
even it is showing failed
Just remove Battery and Do this
Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
Step 3.. Choose Bootloader file "cache.img.ext4.tar"
It will Definetly Pass
After Restart Hold Volume Down and recovery Mode is there .
Put any Rom Better if cm-12-20150301-NIGHTLY-jfltexx and Gapps
Done It
*******************Israr Ahmed Khan **************************
Click to expand...
Click to collapse
Why so complicated..??
Download your stock firmware here
And flash with Odin!!
Simple
HOW TO ROOT Blu Grand M
Disclaimer: I hold no responsibility over what happens to your phone during the beginning,in the middle, and after you follow this guide
backup your files, if you don't then you're about to lose em.
(keep in mind, work in progress,sort of... ?, your choice to follow this guide)
DON'T 100% TRUST THIS YET, BECAUSE THERE IS NO CUSTOM ROM OR ANY WAY I KNOW TO ALLOW YOU TO INSTALL STOCK OS AND KEEP BOOTLOADER UNLOCKED AT THE SAME TIME. APOLOGIES. YOU CAN TRY TO DO SOMETHING ABOUT IT IF YOU WANT. I DON'T HAVE THE DEVICE TO WORK ON THIS.
--start--
Now, before you start. I feel that you need at least a VALID reason to root.
like, why do you want to root? is it for some app that requires root privileges? cause it'd be pretty useless to go
through all this without a proper reason .---. , I'm going to divide the steps into 4 Chapters (hehehe)
also the entire reason why this post exist is because I was helping a friend gain ROOT privileges cause they have an Blu grand M haha..
I don't see that many posts regarding this.. this is just to help people , if you already knew how to root your phone from the beginning then good for you.
Chapter 01: Getting prepared!
Just, WHAT are the things you need to begin rooting exactly???
well(downloads in here aswell):
a computer
a cord for your Blu Grand M
SD card
TWRP recovery for Blu Grand M from Original forum post here , by Laelson , here's a google drive link
SuperSu flashable zip file > http://www.supersu.com/download
make sure the drivers are already installed aswell
ADB > https://forum.xda-developers.com/showthread.php?t=2588979
STOCK ROM > https://www.needrombd.com/Rom/blu-grand-m-firmware/
Chapter 02: Getting started!!
enable developer options by going to settings > system > about phone > keep tapping "build number"
enable "usb debugging" and"OEM Unlocking" in developer options
plug phone to PC
open CMD on your computer then do CD <driverletter>:<into ADB folder>
in cmd , type "adb reboot bootloader" and press enter
put .IMG file into same folder as ADB
on CMD do "fastboot oem unlock"
choose YES
your phone is wiped.
Chapter 03: Flashing TWRP and using SP flash
now, with 2nd chapter done. and the IMG file of the recovery is in the same folder adb is inuse the cmd and type "fastboot flash recovery <nameofFILE>.img then reboot to twrp and then POWER OFF , once its off. open SP Flash Tool extract the downloaded STOCK ROM to its own folder and on SP flash tool and select "scatter loading file" and locate the scatter file of the stock rom after that. you should see on the big box that there are alot of things. unckeck "recovery" and click "download" , and wait for it to finish once it is finished unplug and BOOT PHONE INTO RECOVERY​
Chapter 04: Flashing SUPERSU and reboot ;D
make sure you put your supersu zip in your sd card or phone storage by now, if not then put it in there first , ok so tap on install and locate SUPERSU zip, flash then reboot ;D
CREDITS
- @Laelson , if no TWRP for Blu Grand M then root isn't going to be on this phone for a while , so thanks​
Not confirmed by anyone else but my friend. but try it if you want
My twrp worked Bro?? Congratulations for your tutorial. ?
it's showin internal storage(0mb)...
adb do not working good for my devicve... I download every thing right but when you type
adb oem unlock..... you see ( wait device)... and stop my phone in fastboot mode.... I can not get out from that... when you type ( fastboot devices) no thinge occure ... and you stay in fastboot mode....... I could not get out of it ... I tried several methods and could not .. Just left my phone until it was completely extinguished ... Then I re - shipped it .... It works now .... Maybe work with you ... but never never Succeed with me ..
Will this work with the Blu Grand 5.5 HD as it has the same chipset, processor and GPU? It has a different screen size and resolution
Hi all, I just want to let you know that
* yes, it does work, my friend was able to install it and boot into twrp but so far I have not seen a proper custom ROM for the device I was helping my friend with. so we quit (he eventually got a new google pixel phone anyway)
note: yes, we have installed TWRP and booted into it. but someone has to: make custom rom for device or try to find a way to install STOCK OS and keep bootloader unlocked at the same time. will update OP to warn everyone. sorry.
P.S: sorry for the really late reply, was busy with life.
Hi bro! I tell you that the terminal that I have now, I CANNOT flash anything, it has the BootLoader closed and I can't penetrate or delete it. Any suggestions? Scripts commands do not work, they issue an error message.