Database Info

[Q] PLEASS !HELP! HELP! moto DROID 2 E:can't open /cache/recobery/com

please i need help with my MOTOROLA DROID 2 i had rooted my droid like 2 months ago, at that pint was everything oK. but then i looked on room manager for updates and i found the that says OTA and at that point i had installed gingerbread room on my device everything was good but when i was downloaded the file it stopped without a reason and i started to dowload again this time was complete and when i TRIED TO INSTALLED IT THE PHONE SHOW
This message:
Android sistem recovery<3e>
use volume up/down to highlight and camera to s
reboot sistem now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
E:can't open /cache/recovery/command
WHEN I APPLY SDCARD:UPDATE.ZIP
IT SHOWS
- -install from sdcard. . .
. . .finding update package. . .
openin update package. . .
verifying update package. . .
E:failed toverify whole-file signature
E:signature verification failed
installation aborted
please help me

Please flash any other recovery because you are in stock recoveey
Forever living in my Galaxy Ace using XDA App

how do i flash it
can you tell me how do i flash mi phone on the way that you say

i don't know how to do anything with my droid cause i cant turn it on and when i plug it un all what it does is shows the big letter of motorola the "M" AND I HAVE TO GLUG ITIN AND THEN TRY TO GO RECOVERY MODE AND IT JUST SHOW THE TRIANGLE AND THE"!" AND I CANT GO TO THE RECOVERY MODE THE WAY THAT IT SUPOSSE TO DO IT AND WHEN I PRESS THE LETTERS AROUND THE "Z" IT SHOWS android sistem recovery please help me

Please use the Q&A Forum for questions Thanks
Moving to Q&A

[Q] PLEASE help me update captivate i897 to jelly bean, stuck on

I've been working on this for HOURS and I dont know whats wrong. My phone is rooted by the way. The steps say:
Download the following
1.[Firmware Download] CM10.2 Android 4.3 JB Firmware.
2. [Google Apps download] Google Apps on your Laptop/PC.
Part Two- (Final Steps of Upgrade for Captivate SGH-I897)
Download the above file into PC and Please don’t extract.
Now copy both firmware and google apps into SD card of your Captivate SGH-I897.
Now turn off your Captivate SGH-I897 .
Now restart your Captivate SGH-I897 in debugging mode (by Using Volume Down Key and Home Key together while switching on use Power button ).
Now it will give a warning, Press Volume Down to enter debugging mode.
When your Captivate SGH-I897 in recovery please select “wipe data factory reset” and “wipe cache partition“.
Then return to the main menu and select “Install Zip from SD card” and choose firmware zip file from SD card.
Now upload the file and apply installation.
When installation get over do same for google apps.
Wait till process complete of google apps.
Now return back to recovery menu and reboot Captivate SGH-I897 now.
Updation process is completed.
I am stuck on the bolded in red part. When I search for the firmware I cannot find it anywhere, I checked every folder I see. I even went back and pasted the link into a folder that was showing up when in recovery but then once in recovery, that folder is empty! I dont know why the files are hidden and I cannot install them.
Please help, anyone...

studentofknowledge said:
I've been working on this for HOURS and I dont know whats wrong. My phone is rooted by the way. The steps say:
Download the following
1.[Firmware Download] CM10.2 Android 4.3 JB Firmware.
2. [Google Apps download] Google Apps on your Laptop/PC.
Part Two- (Final Steps of Upgrade for Captivate SGH-I897)
Download the above file into PC and Please don’t extract.
Now copy both firmware and google apps into SD card of your Captivate SGH-I897.
Now turn off your Captivate SGH-I897 .
Now restart your Captivate SGH-I897 in debugging mode (by Using Volume Down Key and Home Key together while switching on use Power button ).
Now it will give a warning, Press Volume Down to enter debugging mode.
When your Captivate SGH-I897 in recovery please select “wipe data factory reset” and “wipe cache partition“.
Then return to the main menu and select “Install Zip from SD card” and choose firmware zip file from SD card.
Now upload the file and apply installation.
When installation get over do same for google apps.
Wait till process complete of google apps.
Now return back to recovery menu and reboot Captivate SGH-I897 now.
Updation process is completed.
I am stuck on the bolded in red part. When I search for the firmware I cannot find it anywhere, I checked every folder I see. I even went back and pasted the link into a folder that was showing up when in recovery but then once in recovery, that folder is empty! I dont know why the files are hidden and I cannot install them.
Please help, anyone...
Click to expand...
Click to collapse
the same thing hpnd wth me also.. a simple thng i did n was able to install it...
frst rename the file to b flashd to 1...
den copy the file dat is 1.zip to both of ur both and sd card (ya in both) den go to cwm n select install zip.. den slct 1.zip...
yu will b able to c the file now

siva aggzz said:
the same thing hpnd wth me also.. a simple thng i did n was able to install it...
frst rename the file to b flashd to 1...
den copy the file dat is 1.zip to both of ur both and sd card (ya in both) den go to cwm n select install zip.. den slct 1.zip...
yu will b able to c the file now
Click to expand...
Click to collapse
I found out what the issue was. I removed my SD card and instead copied the files into the internal memory and was able to locate them that way. Now when once I start installing the firmware I get this error:
Install /sdcard/external_sd ...
then in red letters: E: Short write of /tmp/sideload/package.zip (No space left on device)
Installation aborted.
Perhaps the firmware is faulty? I had downloaded the most up to date one from here: CyanogenMod Downloads
and now I see there has been a new one added just some hours ago. Should I download it?
Thanks,

studentofknowledge said:
I found out what the issue was. I removed my SD card and instead copied the files into the internal memory and was able to locate them that way. Now when once I start installing the firmware I get this error:
Install /sdcard/external_sd ...
then in red letters: E: Short write of /tmp/sideload/package.zip (No space left on device)
Installation aborted.
Perhaps the firmware is faulty? I had downloaded the most up to date one from here: CyanogenMod Downloads
and now I see there has been a new one added just some hours ago. Should I download it?
Thanks,
Click to expand...
Click to collapse
hey... dat error can b a problem due to ur low space remainng in ur internal memory... n ya yu can download and try dat too:good:

SOLUTION TO->E:/mount/cache & Installation Aborted

Having A Problem with E://mount/cache,Installation Aborted!!?
Cracking ur head on what to do! Here is the solution-->
EXAMPLE:
Can't Root Your Device
Some Functions Doesn't Work
Can't Install CWM OR A Custom Recovery
BOOT LOOPS
Another Problems
Here Is How to Solve It !!
BEFORE WE START
WARNINGS
THIS WILL DELETE EVERY THING IN YOUR PHONE
MAKE A BACKUP!!!!!!!!
What You Need
1.Download The 4 Files Frimware + Pit File HERE: http://www.mediafire.com/download/va...E8_OXEAME4.zip
2.Odin 3.07 Here : http://www.mediafire.com/download/cx...jt/Odin307.rar
3.Download Another Frimware For I8262 From Sammobile.com
Installation!!
1.Open Odin
2.Put Your Phone In download Mode
3.Connect it To PC
4.Put The 4Files As Follow
5.Put The Pit File In Pit Section up As in the Photo
6.Another Warning This Will Delete All Your Data
7.Another Warning Displacing the files in a Different Way May Brick Your Phone LOOK AT THE Photo CAREFULLYYYYY
8.Click Start
9.After It Says Pass Wait Until The Phone Displays The First Setup Up Screen
10.After It Shows Up Take The Phone Battery out
11.Wait 10 Seconds
12.Put it Back
13.Go To Download Mode Again
14.Now Install The Sammobile Frim. That You Have Downloaded Using Odin
15.Some one Will Ask Me Why To Install A Frim Again
bec The 4Files + Pit File Is For FIXING PROBLEMS ONLY NOT FOR USE
16.After Odin Finish It May Stuck in The Logo
17.Don't Freak Out
18.Get Off The Battery
19.Go To Recovery Mode : Wipe Data / Wipe Cache / Wipe Dalvik cache
20.SETUP
Enjoy Finshed
If You Want Any Help Let Me Know In The Comment
This was originally posted by memoyasso,I shared it because of title!
IF I Helped You Just Please Press Thanks! Button

[Completed] HELP HELP !! BOOTLOOP [ROOTED] witout cwm

Hi guys . I need your help ..
I have a Firefly Intense X and i rooted it using Kingo and it works fine .. Then I downloaded Pimp My Rom to customized my rom .. I had fun customizing it and it always works fine. Then i'm not contented with my phone's performance so I adjusted it again until I bump in to the adjusting its dpi. I'm not sure if its under Dalvik VM or kernel tweaks .. Then adjust another thing . I don't remember what it is but I remember that it has 'step n1' then again , I adjust something then I click the last step the 'step n(x) - reboot' . then after that , it reboot over and over and over again .. I mean it will show the Company logo the the boot animation then it will go to the homescreen then says download failed after a few seconds , it will go back to the boot animation then go to the homescreen then reboot the again and again and again ..
My phone is recognized by the computer at the device manager under Adb Interface as HTC Dream but my phone is Firefly Mobile. I thought it will appear under 'Other devices' with a yellow warning sign but it's now . I'ts under Adb Interface. I tried to unistall it many times but it is always an HTC Dream. I also downloaded the adb setup 1.4.2 .
I wipe factory data and cache but it is still happening. I already try to go to the fastboot and unlock but i can't unlock it . It says volume up for yes and volume down for no, I click my volume up and nothing is happening. And I also tried to " adb push <filename> /sdcard/. " and it says 'no such file or directory' but the file name I inserted is correct and it is placed to the correct folder. I also tried to removed my sdcard and direct it at my pc and put a new downloaded custom rom and insert it again to my phone but I can't find it when I choose to 'apply update from sdcard'.
NOTE:
I can go to recovery mode and fastboot mode (locked) only not on a CWM.
Please please please .. I need a solution for this problem. And if you have please make it a step-by-step process.
I need you guys .
PLEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASE

Hi,
Thanks for using XDA Assist Please post here Android Q&A, Help & Troubleshooting
Good Luck!
Thread Closed.

Pantech Mega Collection - ROM, RECOVERY

Note:
* USE Google Chrome Browser to Navigate
* Sometime there may be blocking notice, Just hit refresh and cancel just before the list appears.
* I think they actually made archive of all rom available for all device of pentech to research. Its Great I just Hope them to not close the hosting service.
* Making all ROM link is pretty time consuming. I'll update whenever possible. In the mean time use google chrome to browse no problem with this browser. I'm getting block message using firefox.
Address is: http://kimcloud.kr/pantech/
DEVICE LIST:​
Iron - http://kimcloud.kr/pantech/Iron/
Iron2 - http://kimcloud.kr/pantech/Iron2/
LTE - http://kimcloud.kr/pantech/LTE/
LTE EX - http://kimcloud.kr/pantech/LTE EX/
LTE M - http://kimcloud.kr/pantech/LTE M/
LTE-A - http://kimcloud.kr/pantech/LTE-A/
Mirach - http://kimcloud.kr/pantech/Mirach/
Mirach A - http://kimcloud.kr/pantech/Mirach A/
NO.5 - http://kimcloud.kr/pantech/NO.5/
NO.6 - http://kimcloud.kr/pantech/NO.6/
Pop Up Note - http://kimcloud.kr/pantech/Pop Up Note/
R3​ - http://kimcloud.kr/pantech/R3/
http://kimcloud.kr/pantech/R3/A850L_Patch_Jelly_Bean_Official(IronFrimwarePatch).zip
http://kimcloud.kr/pantech/R3/A850-KK-recovery.zip
http://kimcloud.kr/pantech/R3/A870_MIUI.zip
http://kimcloud.kr/pantech/R3/AIO VEGA R3 IronFrimware buil in 1.44s.zip
http://kimcloud.kr/pantech/R3/bootanimation_850l.zip
http://kimcloud.kr/pantech/R3/ef52s-Firmware-20130524-UNOFFICIAL-ef48s.zip
http://kimcloud.kr/pantech/R3/ef52s-Firmware-20130524-UNOFFICIAL-ef48s-Fix.zip
http://kimcloud.kr/pantech/R3/IM-A850K AOSP.zip
http://kimcloud.kr/pantech/R3/IM-A850K_158_Stock_Firmware.zip
http://kimcloud.kr/pantech/R3/IM-A850K_S0837225_update.zip
http://kimcloud.kr/pantech/R3/IM-A850L AOSP.zip
http://kimcloud.kr/pantech/R3/IM-A850L_Bootloader_2.22.zip
http://kimcloud.kr/pantech/R3/IM-A850L_S1233222_FixSMS_FixHotspot.zip
http://kimcloud.kr/pantech/R3/IM-A850S AOSP.zip
http://kimcloud.kr/pantech/R3/IM-A850S_S0216212_update.zip
http://kimcloud.kr/pantech/R3/IM-A850S_S0216222_to_S0216224_cwm.zip
http://kimcloud.kr/pantech/R3/lg r3 2.22.zip
http://kimcloud.kr/pantech/R3/miui_850_fyt_4.9.26_e46aca5379_4.4.zip
http://kimcloud.kr/pantech/R3/MK44.4-ef50l-201406232219-b.zip
http://kimcloud.kr/pantech/R3/Patch_Fix_IronFrimware_V7.0_7.1_7.2_to_7.3_A850_by_diszell2008.zip
http://kimcloud.kr/pantech/R3/PhilZ_Touch_CWM_6.0.3.2_VegaR3_by_diszell2008_fastboot.rar
http://kimcloud.kr/pantech/R3/PhilZ_Touch_CWM_6.0.3.2_VegaR3_by_diszell2008_ZipInstall.zip
http://kimcloud.kr/pantech/R3/R3 SKT 하드브릭 복구파일.zip
http://kimcloud.kr/pantech/R3/r3.zip
http://kimcloud.kr/pantech/R3/vega r3 1.41(TEST).zip
http://kimcloud.kr/pantech/R3/Vega-850-Iron-V1-HeavenAngle_Zpalged_Tekcafe.vn.rar
http://kimcloud.kr/pantech/R3/VEGACameraUpdater.zip
RACER - http://kimcloud.kr/pantech/RACER/
RACER2 - http://kimcloud.kr/pantech/RACER2/
RACER2_Bling - http://kimcloud.kr/pantech/RACER2_Bling/
S1 - http://kimcloud.kr/pantech/S1/
S5 - http://kimcloud.kr/pantech/S5/
S5 Special - http://kimcloud.kr/pantech/S5 Special/
Secret Note - http://kimcloud.kr/pantech/Secret Note/
Secret Up - http://kimcloud.kr/pantech/Secret Up/
X+ - http://kimcloud.kr/pantech/X+/
Screen Shot:​
Useful Links:
* http://forum.xda-developers.com/showthread.php?t=2586698
* http://forum.xda-developers.com/android/general/official-update-pantech-im-850-l-t2914736
* http://forum.xda-developers.com/showthread.php?t=2762605
* http://forum.xda-developers.com/android/general/pantech-device-rom-flashing-tool-t3326294

No pantech discover pdl file?? Mega what?? Mega junk??
Sent from my ZTE N986 using XDA-Developers mobile app

This is very helpful and great post
Sent from my Pantech Vega Iron using XDA Labs

Hi to all
I just want to ask if theres a posible way to extract my stock rom even im not rooted?
I have Pantech IM-100GN the international variant of Pantech IM-100, when i check it in kimcloud, they only have for IM-100S and IM-100K variant.
Is there any idea where i can get the stock rom of my phone?

important
Hello
i want Pantech IM-100GN Firmware
please help me ! important !
thanks

Some pantech problems!
Hi guys.today i need you help(Im so sorry fo my english)
I have A Pantech phone
Information:
Model:IM-100GN
Android:6.0.1
Snapdragon 430
Unlocked bootloader
.....
My problem is this : phone does not boot normally.it just boot into fastboot.
But i can bot it to:
recovery mode(stock recovery)-fastboot mode-SW Upgarde mode-Pantech multi menu mode(i will explain about this)
Whats happend?
the phone work good and i love it.but i unlock bootloader and phone started factorey reset.i dont need to internal storage files.after bootloader unlock.i flash im100s model rom and......
Boooooom.phone bricked!!!!
So i found rom for im 100S and im100 K models.this models just another generation from Im100.i think S for Europe and k for american region(or somethink like this!).roms format is PDL
Methods i know for solution this problem
method 1:flash PDL file from SW Upgrade mode with pdl APP
Error : pdl app dont allow me for flashing k and s rom to my gn phone.
Error: the com5 phone binary is not math with firmware file!
com5:my phone connected with usb port
Solution 1:I need IM-100GN pdl rom but i cant find that
Soluton 2:i have normal im100 s and k model rom(zip format).that file have system.img boot.img and twrp recovery.img
boot.img is not math with my phone.i edited boot.img file and it is ready for flash to my phone.
wait!
there is a problem.
system.img file is not math with my phone.when i flash that ,phone will bootloop in startup picture(it dont restart.it just stay at startup image).in the past i have huawei honor 3c lite.when i edit phone model to my name from build.prop,it bootloop in boot picture(huawei red startup picture)(just like what happend to my pantech phone).i extracted im100k system.img file and edited build.prop file to be math with my phone every thing is like my phone for example system apps and bootanimation.i completed that.im replaced im-100s with im100GN In every where in build.prop file.i certain that build.prop file is well
Oh no another problem
I can not repack system file with any program and box
Ur tool____ faild
Unpack & Repack tool____ faild
...... completly faild
T_T
Find a way to flash build.prop:
i build a zip file with META.INF and commands and build.prop file.i signed that zip file.flash that from recovery
So there is problem
Recovery dony allow me to flash
Error:cannot sign whole file
Installion aborted
Flash build.prop with fastboot
I tried that.when i try to flash that with cmd:
target reported max download size is xxxxxx
xxxxxx:size in byte
Fastboot forced to erase system partiton.
Fastboot and recovery faild
I tried to flash or boot twrp recovery.but phone just allow me to flash and erase the system and boot partition.i cant erase and flash or edit the data and cache and recovery partition
When i try to just boot recovery,cmd report me:
Sending twrp___ok
Writing twrp____Faild
Error: unknow command
What is pantech multi menu?
my phone have a secret menu.its open with this password:
Volume press-power press-volume press-volume press-power press
Information in this menu:
Boot mode : orange mode
Kernel tamperd:not tamperd
Rooted:not rooted
Full model:IM-100GN.001
chipset:MSM8937
and other thing thats not important
I can go to:
QFIL Mode
PDL Mode (SW Upgrade)
Ram dump
Restart
Power off
what i need:
Pantech IM-100GN rom file with PDL format
PDL file flasher with no error
or
PDL file extractor
or
System.img repack app
Or
Build.prop flasher app
If you have any solution or file please help me
Thank you very much

IM-100GN rom
Hi.You work is good. every developer need some pantech roms!!!
but wait.
i need you help.
I have Pantech IM-100GN.
i can not find this phone rom can you send me this phone rom??
PDL or ZIP format
thank you very much.

Mr.Hero.118 said:
Hi.You work is good. every developer need some pantech roms!!!
but wait.
i need you help.
I have Pantech IM-100GN.
i can not find this phone rom can you send me this phone rom??
PDL or ZIP format
thank you very much.
Click to expand...
Click to collapse
Hi Pal
Regarding SKY IM-100 S,K or GN
Dont use PDL on it or any of those method above
Pantech very secure on there phone even rooting and and trying to modify there stock app can cause brick
S and K is from korea
You can flash any of it
Just download n zip file and flash it via stock recovery

it is late
hi.thank you for reply
but there is a problem
my im-100gn have stock recovery.when i send the zip file from adb in recovery mode (apply update from adb)
recovery report me:
the zip file is not signed
installing aborted
.
when i try to signing the zip file with some applications after signing recovery dont allow me to install.the error text like this:
the woofer is missing(i cant remember the "woofer" word it maybe spooler or something else!!!)
installing aborted.
update:
finally i sent my device to warranty center. one week ago. but now the warranty dont respond me.any tel number or any e-mail.
i stay at home for one month.i hope they send me my fixed im-100gn

Mr.Hero.118 said:
hi.thank you for reply
but there is a problem
my im-100gn have stock recovery.when i send the zip file from adb in recovery mode (apply update from adb)
recovery report me:
the zip file is not signed
installing aborted
.
when i try to signing the zip file with some applications after signing recovery dont allow me to install.the error text like this:
the woofer is missing(i cant remember the "woofer" word it maybe spooler or something else!!!)
installing aborted.
update:
finally i sent my device to warranty center. one week ago. but now the warranty dont respond me.any tel number or any e-mail.
i stay at home for one month.i hope they send me my fixed im-100gn
Click to expand...
Click to collapse
I already try it on any GN
Just flash it via recovery
Save the zip file on sd card and install it

thank you very much
Thank You Very Much JTunes
you're person who answer my questions about Pantech IM-100GN
yesterday warranty say me:repairing any smart phone in our center take 20 or 30 day and send it to you take 7 day.
i sent my IM-100GN 15 days ago.i hope my phone be well after 30 days
honestly i tried flashing IM-100 K or S rom in zip format.in adb or sd card update mode in stock recovery.both of them show me signing error and after signing zip file recovery still prevent flashing any zip file.so i tried to flashing system.img and boot.img files in fastboot mode.But the phone didn't boot and it just stay at "Pantech" Logo.
i think i should wait one or two years for this
publishing the Pantech IM-100GN Rom With "PDL" Format.
in this way my phone will be like first day
Again:thank you :highfive::highfive::highfive: