Database Info

[Help] Install new ROM

Hello guys, i'm new on the world of Android and i need a little help. I'm newbie but i learn fast.
I got a new phone with android 4.4.2 China honor 3 (fake), after uninstalling some China app the operation system started to stuck at logo at the start.
So to solve the problem i red that i could restore the old OS using ROM file. The factory where i bought the phone sent me the official ROM file for my phone.
Now i entered on Recovery mode, first i did "wipe data/factory reset", then with ADB i loaded the file .zip "adb sideload update.zip". But how the file is uploaded it says "Installation aborted", without any error.
So now i need your help how can i restore this system... I tried also to buy an SD card 8 gb and upload the file on the SD, but same error.
Thank you for your help!

try this guide
http://forum.xda-developers.com/showthread.php?t=2517943
bcuz you can;t flash rom with stock recovery so you install cwm mod from this guide:fingers-crossed:

3lo0sh said:
try this guide
http://forum.xda-developers.com/showthread.php?t=2517943
bcuz you can;t flash rom with stock recovery so you install cwm mod from this guide:fingers-crossed:
Click to expand...
Click to collapse
Thank you for the answer. But wheni try to run TouchRecoveryLoader.zip from recovery, it says "installation aborted" like for the ROM.
I dont know if the phone got root access, i think this can be the problem.
Can youhelp me?
Thank you

Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.

shayolz said:
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
Click to expand...
Click to collapse
if you open the zip file you got, whats inside it? is it a .tar file, or a .md5 file?

Sorry, i didn't write that i SOLVE the problem!
I userd flash tool selecting only "ANDROID" and pointing to the system.img of the ROM that the factory gave me.
Android reinstalled, all working fine.
/closed
thanks

Question Lenovo Phab PB1 770m no operating system help

Hi all i have new Lenovo PB1 770m I attempted to root it the TWRP was installed but it was not rooted
then I tried to update the firmware to the latest 151111 and no go, in the end i managed to delete the operating system so now I can boot to recovery mode only, When I try to restart it comes up with No OS Installed, I have tried to install xposed v79 sdk21 arm64zip no go, Ok now I know that I am an IDIOT for
not making a backup of original system and not cheking the firmware was the same as the root guide,
On the top of recovery screen is :- 2.8.7.7 SevenMaxs and TeamWin Recovery Project, I guess this could
be an expensive lesson, I have been looking for an original ROM with no luck so any help would be very
much appreciated, Thanks pluto1956, Mike
ps used info and files from here to try and root. http://forum.xda-developers.com/andr...oting-t3290347
UPDATE I managed to get a ROM from Russian site PB1-770M_S000156_150930_ROW_fastboot.7z 1.8gig
instructions say to be installed from computer via usb my problem is I can only access the internal storage or external SD card not the Usb-otg so it seems I can only update from the sd or internal memory
tried putting the rom on both but no go

Hi is there anybody that knows where and how to install the stock firmware for the phab PB1-770M

HELP
Same as above. need a stock rom. formatted internal storage mistakenly. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

naeemdurrani said:
Same as above. need a stock rom. formatted internal storage mistakenly. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.

Thanks brother, yesterday i downloaded one russian rom in zip format and there was a .bat file included in it. i only double clicked and it flashed through adb and fastboot and it was successfull. i got the operating system 5.0.2 but WLAN is not working, tried flashing several time but no luck. i learned that it is still under warranty ..so sent it to warranty. in a week it will be back with be for testing again hopefully.
well i will try your method as soon as i get my beast again. Thank you so much for helping out in timely manner, really appreciate it brother.
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
---------- Post added at 08:10 AM ---------- Previous post was at 08:06 AM ----------
it is very easy my friend just look into the only topic/thread about Phab plus in xda. it will guide you well.
if you get any error in recovery like footer is wrong/signature verification failed. connect your phone and first check if your device in being tracked by adb. use adb devices.
if your device appear in the list of devices ..use fastboot oem unlock then flash sevenmax twrp again after entering into temporary twrp as per phab plus thread.
0verdaflow said:
How can you root this damn phones.... i was trying like for 2 days....
Click to expand...
Click to collapse

jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
Could you please elucidate more? I downloaded the ROM and the flash program. However, I've no clue how to get going. I don't even see the xml files anywhere (as mentioned by you).
Just don't want to screw it up bad so being little more cautious.

jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
im getting this error
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
cant flash the stock rom

man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Wakatsik said:
im getting this error
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
cant flash the stock rom
Click to expand...
Click to collapse

naeemdurrani said:
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Click to expand...
Click to collapse
i cant use the .bat cause my phone is already bricked...it wont be recognize by the app...the only way is thru QFIL but the problem is that i always get the error above

Hi, same here. I tried using QFIL and getting Sahara Fail. Then tried clicking on the bat file but its not working since the phone is not recognized. Please help.
EDIT : I got the QFIL working just now and my phone is working. Flashed the stock rom and I think it will be just fine.

whiskey_1388 said:
Hi, same here. I tried using QFIL and getting Sahara Fail. Then tried clicking on the bat file but its not working since the phone is not recognized. Please help.
EDIT : I got the QFIL working just now and my phone is working. Flashed the stock rom and I think it will be just fine.
Click to expand...
Click to collapse
My phone was wiped by me . I have TWRP and my phone is read as ADB interface (when in recovery mode). I tried adb devices and it returned 1f82f24b recovery. I also can access my phone memory from PC when in TWRP recovery which enables me to transfer files.
My problem is it is only read as ADB interface not as Qualcom COM port device. When I try Download_with_partition.cmd I get the error that it can not distinguish devices and to try. Any solution by those managed to install it successfully?

For everyone landing in this page due to wiping his OS of Lenovo Phab Plus by mistake (like I did), please refer to this thread:
Lenovo Phab Plus PB1-770M Stock ROM needed

Thanks!
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
I was not doing the 8936.mbn part!
By default it is 8916 so it doesnt work. but after changing that setting, it work!:highfive::good:

I can't unbrick
Hi!
I have a Lenovo Phab PB1-770M, this phone won't turn on, only Lenovo logo, or fastboot or flashmode.
With Flashtool i can't flash. In Fastboot i flash a recovery or operating system, i reboot the phone and again only the Lenovo screen, operating system not starting.
What can i do?

naeemdurrani said:
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Click to expand...
Click to collapse
this is what i get running the .bat command >
'adb' is not recognized as an internal or external command,
operable program or batch file.
╟δ╚╖▒ú╩╓╗·─▄╣╗╩╢▒≡adb╔Φ▒╕!╟δ╓╪╩╘úí
please ensure the phone can distinguish adb devices! Please retry!
Press any key to continue . . .

Upgrade QiKU (CP8692_I02) to 6.0.1, official updates and also activate VoLTE

Hello Friends
A little background first !!
QiKU Q Terra (CP8692_I02) which was sold in India and came pre-installed with 360 OS v21, Android 5.1. The OEM went back to China hence there haven not been any software update for our device. I had been trying to boot latest Chinese 360 OS on Indian Qiku Terra to get updates but after flashing the Chinese version the device would not boot at all and would get stuck in fastboot mode. To revive the device, I had to flash back the V21, I had tried several times but no success.
I even got in touch with the 360 OS engineers over mail with the help of an administrator of Qiku Chinese forum but the engineers said it's not possible to flash Chinese 360 OS on Indian Qiku Q Terra.
I had also been trying to root QiKU and I was able to figure it out all recently.
Check out my post -- https://forum.xda-developers.com/an...i02-unlock-t3493636/post69455878#post69455878
This tutorial is also useful for users of CP8692_M02 who had flashed the v21 on their devices and now are not able to go back to CP8692_M02.
Warning !! Try this own your on risk although it's very safe if you follow the instructions without missing any steps. Don't blame me if you still manage to kill your phone and loose your job :laugh::laugh:
Let's begin !!
Just ensure your device bootloader is unlock before you follow the instructions as it's required to boot 360 Chinese OS on the Indian QiKU.
Download the latest firmware and flash the same with YGDP or Qiku Download Assistant tool. When finished, the device won't boot and still be in fastboot mode. Now boot TWRP recovery from your pc, go to the folder where you have the TWRP recovery and press shift and right click and select "open command window here" and type the following
fastboot -i 0x1ebf boot (recovery name).img
This should boot TWRP on your device.
You can also flash TWRP recovery if wish to,
fastboot -i 0x1ebf flash recovery (recovery name).img
Now boot TWRP
fastboot -i 0x1ebf boot (recovery name).img
When in recovery mode you can use cmd to extract params partition which contain your device model name. Open cmd on your pc and type the following command
dd if=/dev/block/mmcblk0p30 of=/sdcard/params.bak
Once done, you'll have a file name params.bak on your phone's internal memory, copy the same to your pc. Download NotePad++ and install it, link - https://notepad-plus-plus.org/
Only use NotePad++ to edit the params, don't use NotePad. Plus make a copy of your params.bak file and keep it somewhere safe in case you mess up with original params file.
Right click on params.bak and open it with NotePad++, now search CP8692. The device model name would be CP8692_I02 just change I to M and save the changes, now it should be CP8692_M02.
The system partition size is not enough to flash Gapps hence you need to use TWRP recovery resize option.
In TWRP recovery and select > Wipe > Advance Wipe > System > click FS Option > click Resize FS now you shall have more free space in system partition
In TWRP now click reboot then click bootloader, in bootloader press volume up for fastboot mode. On pc open cmd in the folder where you have params.bak saved and type the following command:-
fastboot -i 0x1ebf erase params
fastboot -i 0x1ebf flash params params.bak
fastboot -i 0x1ebf reboot
If everything went well your device should boot Chinese 360 OS, Android 6.0.1 normally.
Now flash modified Gapps in TWRP which you have downloaded. The modified Gapps has Gmail & Hangout beside core apps and rest you can download from play store later.
If you flash bigger Gapps, the device will not boot or it shall be in bootloops coz of Gapps size and if you don't flash Gmail and Hangouts with the modified Gapps and download the same from Play store then it would give you connection trouble.
In case you wish to root then flash SuperSU.zip in TWRP.
Back to the booted device:-
To Activate VoLTE, download QuickShortcutMaker app from play store. Open the app and locate MBN test > click on the dropdown menu > click Try > Tick Volte_OpenMkt-Commercial-CMCC > and last click Activate.
Close the app and go to phone setting > Call settings > and enble VoLTE and you're done. You should see HD sign in the status bar of your phone. Now you can enjoy VoLTE calls.
Download the latest 360OS 2.0 V18 stable version: http://pan.baidu.com/s/1slCmsKP password: i65r
Follow the tutorial to download from Baidu without log-in and download client - https://www.youtube.com/watch?v=cigJh9jg4-c
Download modified Gapps and supersu.zip - https://drive.google.com/drive/folde...ElFemQwTTFXcTQ
Credits:
Goes to me @Zauq for figuring out unlocking bootloader, rooting, modifying TWRP for cp8692_I02 etc. Without the unlocked bootloader the above was not possible.
Goes to @cuongvietnam for instructions to modify params and flashing the same and also about the Gapps size issue
Have Fun :good::good::good:

plz share firmware/rom
good effort bro......kindly wants to tell that new kingroot app is now able to root qiku q terra.....and using app2sd i am able to move max of my apps to sd card ....but i also like ur effort to install android 6 rom in indian qiku.....but i hav a request to plz make a video about whole thing(as that would me more reliable to understand).....and plz share ur downloaded firmware/rom......i hav downloaded android6.cpb file shared by zuaq....so any trick to install directly this rom ?
thx in advance
---------- Post added at 05:28 AM ---------- Previous post was at 04:59 AM ----------
and also i think we can use buildprop edit apk to change build name of indiian qiku (I->M) .....anyway i hav very little knowlg of all this...but try to impliment ur process

Rahulraj2012 said:
good effort bro......kindly wants to tell that new kingroot app is now able to root qiku q terra.....and using app2sd i am able to move max of my apps to sd card ....but i also like ur effort to install android 6 rom in indian qiku.....but i hav a request to plz make a video about whole thing(as that would me more reliable to understand).....and plz share ur downloaded firmware/rom......i hav downloaded android6.cpb file shared by zuaq....so any trick to install directly this rom ?
thx in advance
---------- Post added at 05:28 AM ---------- Previous post was at 04:59 AM ----------
and also i think we can use buildprop edit apk to change build name of indiian qiku (I->M) .....anyway i hav very little knowlg of all this...but try to impliment ur process
Click to expand...
Click to collapse
Help me
I was plash rom but now my phone is hardbrick
My computer is see bootloader but flash file cpd no working

mr_thao said:
Help me
I was plash rom but now my phone is hardbrick
My computer is see bootloader but flash file cpd no working
Click to expand...
Click to collapse
You can load bootloader in your manager device? If you can, so it not brick!

Zauq said:
Hello Friends
A little background first !!
QiKU Q Terra (CP8692_I02) which was sold in India and came pre-installed with 360 OS v21, Android 5.1. The OEM went back to China hence there haven not been any software update for our device. I had been trying to boot latest Chinese 360 OS on Indian Qiku Terra to get updates but after flashing the Chinese version the device would not boot at all and would get stuck in fastboot mode. To revive the device, I had to flash back the V21, I had tried several times but no success.
I even got in touch with the 360 OS engineers over mail with the help of an administrator of Qiku Chinese forum but the engineers said it's not possible to flash Chinese 360 OS on Indian Qiku Q Terra.
I had also been trying to root QiKU and I was able to figure it out all recently.
Check out my post -- https://forum.xda-developers.com/an...i02-unlock-t3493636/post69455878#post69455878
This tutorial is also useful for users of CP8692_M02 who had flashed the v21 on their devices and now are not able to go back to CP8692_M02.
Warning !! Try this own your on risk although it's very safe if you follow the instructions without missing any steps. Don't blame me if you still manage to kill your phone and loose your job :laugh::laugh:
Let's begin !!
Just ensure your device bootloader is unlock before you follow the instructions as it's required to boot 360 Chinese OS on the Indian QiKU.
Download the latest firmware and flash the same with YGDP or Qiku Download Assistant tool. When finished, the device won't boot and still be in fastboot mode. Now boot TWRP recovery from your pc, go to the folder where you have the TWRP recovery and press shift and right click and select "open command window here" and type the following
fastboot -i 0x1ebf boot (recovery name).img
This should boot TWRP on your device.
You can also flash TWRP recovery if wish to,
fastboot -i 0x1ebf flash recovery (recovery name).img
Now boot TWRP
fastboot -i 0x1ebf boot (recovery name).img
When in recovery mode you can use cmd to extract params partition which contain your device model name. Open cmd on your pc and type the following command
dd if=/dev/block/mmcblk0p30 of=/sdcard/params.bak
Once done, you'll have a file name params.bak on your phone's internal memory, copy the same to your pc. Download NotePad++ and install it, link - https://notepad-plus-plus.org/
Only use NotePad++ to edit the params, don't use NotePad. Plus make a copy of your params.bak file and keep it somewhere safe in case you mess up with original params file.
Right click on params.bak and open it with NotePad++, now search CP8692. The device model name would be CP8692_I02 just change I to M and save the changes, now it should be CP8692_M02.
The system partition size is not enough to flash Gapps hence you need to use TWRP recovery resize option.
In TWRP recovery and select > Wipe > Advance Wipe > System > click FS Option > click Resize FS now you shall have more free space in system partition
In TWRP now click reboot then click bootloader, in bootloader press volume up for fastboot mode. On pc open cmd in the folder where you have params.bak saved and type the following command:-
fastboot -i 0x1ebf erase params
fastboot -i 0x1ebf flash params params.bak
fastboot -i 0x1ebf reboot
If everything went well your device should boot Chinese 360 OS, Android 6.0.1 normally.
Now flash modified Gapps in TWRP which you have downloaded. The modified Gapps has Gmail & Hangout beside core apps and rest you can download from play store later.
If you flash bigger Gapps, the device will not boot or it shall be in bootloops coz of Gapps size and if you don't flash Gmail and Hangouts with the modified Gapps and download the same from Play store then it would give you connection trouble.
In case you wish to root then flash SuperSU.zip in TWRP.
Back to the booted device:-
To Activate VoLTE, download QuickShortcutMaker app from play store. Open the app and locate MBN test > click on the dropdown menu > click Try > Tick Volte_OpenMkt-Commercial-CMCC > and last click Activate.
Close the app and go to phone setting > Call settings > and enble VoLTE and you're done. You should see HD sign in the status bar of your phone. Now you can enjoy VoLTE calls.
The latest firmware is 360OS 2.0 (12.28) which is beta and gets weekly update. Download the firmware - http://bbs.360.cn/thread-14613403-1-1.html
Follow the tutorial to download from Baidu without log-in and download client - https://www.youtube.com/watch?v=cigJh9jg4-c
Download modified Gapps and supersu.zip - https://drive.google.com/drive/folde...ElFemQwTTFXcTQ
Credits:
Goes to me @Zauq for figuring out unlocking bootloader, rooting, modifying TWRP for cp8692_I02 etc. Without the unlocked bootloader the above was not possible.
Goes to @cuongvietnam for instructions to modify params and flashing the same and also about the Gapps size issue
Have Fun :good::good::good:
Click to expand...
Click to collapse
I wasn't take dd if=/dev/block/mmcblk0p30 of=/sd card/params.bak
C:\adb>dd if=/dev/block/mmcblk0p30 of=/internalsdcard/params.bak
'dd' is not recognized as an internal or external command,
operable program or batch file.
Hlep me

mr_thao said:
I wasn't take dd if=/dev/block/mmcblk0p30 of=/sd card/params.bak
C:\adb>dd if=/dev/block/mmcblk0p30 of=/internalsdcard/params.bak
'dd' is not recognized as an internal or external command,
operable program or batch file.
Hlep me
Click to expand...
Click to collapse
Have you tried the code in custom recovery mode??? If you're using the code when the device is NOT in recovery mode then you have to use the following code:-
adb shell
su
dd if=/dev/block/mmcblk0p30 of=/internalsdcard/params.bak
Just bear in mind that you have to be rooted to use the above mentioned code and in recovery mode you don't need to be rooted.

mr_thao said:
Help me
I was plash rom but now my phone is hardbrick
My computer is see bootloader but flash file cpd no working
Click to expand...
Click to collapse
What was your device model no when you flashed the rom and which rom version did you flash which caused the brick???

Rahulraj2012 said:
good effort bro......kindly wants to tell that new kingroot app is now able to root qiku q terra.....and using app2sd i am able to move max of my apps to sd card ....but i also like ur effort to install android 6 rom in indian qiku.....but i hav a request to plz make a video about whole thing(as that would me more reliable to understand).....and plz share ur downloaded firmware/rom......i hav downloaded android6.cpb file shared by zuaq....so any trick to install directly this rom ?
thx in advance
---------- Post added at 05:28 AM ---------- Previous post was at 04:59 AM ----------
and also i think we can use buildprop edit apk to change build name of indiian qiku (I->M) .....anyway i hav very little knowlg of all this...but try to impliment ur process
Click to expand...
Click to collapse
Flashing the supersu.zip to root Qiku is the easiest way if you ask me. I tried my best to give the instructions in a simplest way possible making video is not on my mind.
Changing the model no in build.prop would not help in booting Android 6.0.1 on Indian Qiku v21. Had this been so easy I would've done the same a long time ago

update file params.bak edited
step 1 : flash rom china and flash TWRP
Step2: flash params.bak
Step 3: reboot
Done
Link : https://tinhte.vn/threads/danh-gia-chi-tiet-qiku-terra-sieu-pham-den-tu-india.2543152/#post-49187102
Rom restore , rooted and playstore,super lite : https://drive.google.com/file/d/0B1JX0MSsEt63Zzd2MzVMb20wNTA/view

Hello bro,i want to downgrade to 5.1 v021 from 6.0 v18 china rom,but i haven't link rom.zip (i have twrp),give me link rom 5.1v021 .zip,please
Thanks for watching!?

volte is not activating even though option came by quickshortcut..app
android 6.0 successfully installed but...volte is not activating even though option came by quickshortcut..app........also need help to change chinese 360safe apk to change language in english
....thx in advance

Rahulraj2012 said:
android 6.0 successfully installed but...volte is not activating even though option came by quickshortcut..app........also need help to change chinese 360safe apk to change language in english
....thx in advance
Click to expand...
Click to collapse
Help me @Zauq. I am not able to download 6.0 update file from baidu as connection to file gets disconnected after 1 GB of data everytime. I have wasted atleast 10 GB of data due to this. Please help me out if you can upload the file to google.
Thank you in advance.

Rahulraj2012 said:
android 6.0 successfully installed but...volte is not activating even though option came by quickshortcut..app........also need help to change chinese 360safe apk to change language in english
....thx in advance
Click to expand...
Click to collapse
Did you also enable VoLTE in system settings?? I would not be able to change Chinese language in 360safe.apk.

imlb said:
Help me @Zauq. I am not able to download 6.0 update file from baidu as connection to file gets disconnected after 1 GB of data everytime. I have wasted atleast 10 GB of data due to this. Please help me out if you can upload the file to google.
Thank you in advance.
Click to expand...
Click to collapse
My google drive is already full hence won't be able to upload it. Trying signing up Baidu and download the file with Baidu client.

Zauq said:
My google drive is already full hence won't be able to upload it. Trying signing up Baidu and download the file with Baidu client.
Click to expand...
Click to collapse
Thanks for your quick reply. I am not able to sign up on baidu. If you have latest file than please upload on any big file sharing site such as pcloud. That will be very helpful. I am bit of noob on development side of Android. I have developed kernel driver for real time linux but android I am learning. Please share if any good tutorials to start developing for Android. Thanks again @Zauq

imlb said:
Thanks for your quick reply. I am not able to sign up on baidu. If you have latest file than please upload on any big file sharing site such as pcloud. That will be very helpful. I am bit of noob on development side of Android. I have developed kernel driver for real time linux but android I am learning. Please share if any good tutorials to start developing for Android. Thanks again @Zauq
Click to expand...
Click to collapse
There you go --- https://drive.google.com/file/d/0Bwy9M10qfmJLVm9MQTU0N1U2Tnc/view?usp=sharing

Have somebody schematic diagram of qiku phones? Please let me know, if find something.

Hello dear all, I have 2 issues
1) not able to get volte , even though hd voice enabled via quick shortcut app
2)updated to android 6 but even though can't make my sd card as internal storage(option is for only as portable storage present....Just like galaxy s7 I also tried abd command, becoz in s7 also even after android 6 update sdcard as internal is not by default present .....But failed)
Plz help .....Thx in advance bro zuak

Rahulraj2012 said:
Hello dear all, I have 2 issues
1) not able to get volte , even though hd voice enabled via quick shortcut app
2)updated to android 6 but even though can't make my sd card as internal storage(option is for only as portable storage present....Just like galaxy s7 I also tried abd command, becoz in s7 also even after android 6 update sdcard as internal is not by default present .....But failed)
Plz help .....Thx in advance bro zuak
Click to expand...
Click to collapse
1) Do you see HD sign in the status bar after enabling VoLTE through QuickShortcurMaker App??
2) Did you follow similar adb shell command for internal storage?? --- https://www.youtube.com/watch?v=PZLV5STiAW8

1) I m able to get on/off volte settings after quick shortcut apk,but as u ask......No hd sign in status bar
2) yes I had applied same adb shell commands but nothing happens, 360 os restarted but no increment in internal memory I need to format my memory card to use it once again
I request to make a small video for this isse resolution and plz upload if possible

[GUIDE] Rooting Blu Grand M and Install TWRP ( STILL WORKING ON IT )

HOW TO ROOT Blu Grand M
Disclaimer: I hold no responsibility over what happens to your phone during the beginning,in the middle, and after you follow this guide
backup your files, if you don't then you're about to lose em.
(keep in mind, work in progress,sort of... ?, your choice to follow this guide)
DON'T 100% TRUST THIS YET, BECAUSE THERE IS NO CUSTOM ROM OR ANY WAY I KNOW TO ALLOW YOU TO INSTALL STOCK OS AND KEEP BOOTLOADER UNLOCKED AT THE SAME TIME. APOLOGIES. YOU CAN TRY TO DO SOMETHING ABOUT IT IF YOU WANT. I DON'T HAVE THE DEVICE TO WORK ON THIS.
--start--
Now, before you start. I feel that you need at least a VALID reason to root.
like, why do you want to root? is it for some app that requires root privileges? cause it'd be pretty useless to go
through all this without a proper reason .---. , I'm going to divide the steps into 4 Chapters (hehehe)
also the entire reason why this post exist is because I was helping a friend gain ROOT privileges cause they have an Blu grand M haha..
I don't see that many posts regarding this.. this is just to help people , if you already knew how to root your phone from the beginning then good for you.
Chapter 01: Getting prepared!
Just, WHAT are the things you need to begin rooting exactly???
well(downloads in here aswell):
a computer
a cord for your Blu Grand M
SD card
TWRP recovery for Blu Grand M from Original forum post here , by Laelson , here's a google drive link
SuperSu flashable zip file > http://www.supersu.com/download
make sure the drivers are already installed aswell
ADB > https://forum.xda-developers.com/showthread.php?t=2588979
STOCK ROM > https://www.needrombd.com/Rom/blu-grand-m-firmware/
Chapter 02: Getting started!!
enable developer options by going to settings > system > about phone > keep tapping "build number"
enable "usb debugging" and"OEM Unlocking" in developer options
plug phone to PC
open CMD on your computer then do CD <driverletter>:<into ADB folder>
in cmd , type "adb reboot bootloader" and press enter
put .IMG file into same folder as ADB
on CMD do "fastboot oem unlock"
choose YES
your phone is wiped.
Chapter 03: Flashing TWRP and using SP flash
now, with 2nd chapter done. and the IMG file of the recovery is in the same folder adb is inuse the cmd and type "fastboot flash recovery <nameofFILE>.img then reboot to twrp and then POWER OFF , once its off. open SP Flash Tool extract the downloaded STOCK ROM to its own folder and on SP flash tool and select "scatter loading file" and locate the scatter file of the stock rom after that. you should see on the big box that there are alot of things. unckeck "recovery" and click "download" , and wait for it to finish once it is finished unplug and BOOT PHONE INTO RECOVERY​
Chapter 04: Flashing SUPERSU and reboot ;D
make sure you put your supersu zip in your sd card or phone storage by now, if not then put it in there first , ok so tap on install and locate SUPERSU zip, flash then reboot ;D
CREDITS
- @Laelson , if no TWRP for Blu Grand M then root isn't going to be on this phone for a while , so thanks​

Not confirmed by anyone else but my friend. but try it if you want

My twrp worked Bro?? Congratulations for your tutorial. ?

it's showin internal storage(0mb)...

adb do not working good for my devicve... I download every thing right but when you type
adb oem unlock..... you see ( wait device)... and stop my phone in fastboot mode.... I can not get out from that... when you type ( fastboot devices) no thinge occure ... and you stay in fastboot mode....... I could not get out of it ... I tried several methods and could not .. Just left my phone until it was completely extinguished ... Then I re - shipped it .... It works now .... Maybe work with you ... but never never Succeed with me ..

Will this work with the Blu Grand 5.5 HD as it has the same chipset, processor and GPU? It has a different screen size and resolution

Hi all, I just want to let you know that
* yes, it does work, my friend was able to install it and boot into twrp but so far I have not seen a proper custom ROM for the device I was helping my friend with. so we quit (he eventually got a new google pixel phone anyway)
note: yes, we have installed TWRP and booted into it. but someone has to: make custom rom for device or try to find a way to install STOCK OS and keep bootloader unlocked at the same time. will update OP to warn everyone. sorry.
P.S: sorry for the really late reply, was busy with life.

Hi bro! I tell you that the terminal that I have now, I CANNOT flash anything, it has the BootLoader closed and I can't penetrate or delete it. Any suggestions? Scripts commands do not work, they issue an error message.

Swipe Elite max : Unlock Bootloader,Unofficial TWRP, Rooting and Stock reflash.

IMPORTANT UPDATE : I have observed that when mounting system R/w device restarts. It means that even after rooting successfully, system is blocking the app. So rooting will not be complete as of now,till further corrections. Rest of the operations are normal, quick reboot apps work properly. and device works normally. So please bear with me.
Freinds , this thread is basically for what the title suggests. After a long time I was able to do it.
I'll update as required, so be patient. and keep watching.
1. Unlock Bootloader
a. Boot device in bootloader from adb in cmd terminal. (To go in fastboot mode, press power and volume down button ).
Please enter these commands, one at a time.
Code:
adb devices
(this will show your device)
adb reboot-bootloader
( device will reboot to bootloader). Then enter this...
fastboot devices
(this will show your device)
fastboot oem unlock-go
( If it shows already unlocked, go to twrp flash. If it is not, It will ask for erasing data, so backup all your data. This will unlock your bootloader.)
2. Flash TWRP
In fastboot mode: continue.......
Code:
fastboot flash recovery twrp.img
(Flash the image I have provided)
You can also try
fastboot boot twrp.img
( to try this image file, if you are scared of bricking the phone.)
3. Flash patched boot.
Code:
fastboot flash boot boot.img
(Flash the image I have provided. This is necessary as otherwise the su zip may not work )
4. Rooting
Please copy the SuperSu zip file to your micro sd card. Now boot to Twrp recovery. My advice is to backup of your system and boot. Then wipe data, dalvik-cache,cache, Internal storage. (Sometimes, format option is required.)
Now flash this zip.
If there are errors anywhere, please tell me and I shall try to correct them.
Updates :
1. Twrp stable added on 8/6/2018
2. Twrp_3.1.0.1 added on 11/6/2018, Removed Old Twrp link.
3. Twrp_3.1.0.1 Link updated on 13.6.2018.
4. Twrp_3.1.0.1 Link updated on 9.7.2019. Removed Old Twrp 3.1.0.1 link.
Downloads
1. Twrp_Stable_3.0.2.0.img: Link
2. TWRP_3.1.0.1_unofficial_SwipeEliteMax : https://drive.google.com/open?id=1n-DfHwC4_WRn_Jlr5FosOb6lW827M5ho
Remember first thing before rooting, do a backup of system and boot.img. Rest is your choice.
2. SuperSu zip: http://www.supersu.com/download Or you can download from anywhere on the net.
3. Patched Boot : Link

Stock Reflash and subsequent Update:
1. Stock Version V12 Reflash :
Remember , boot takes 5-10 mins to come on. So don't panic when device doesn't boot.
If the need arises due to any reason device hangs in logo, first restore only boot which you backed up. If still no change, restore system also.
But if you want to flash stock version , then read ahead.
The FOTA zip did not work for me from adb sideload. So I will recommend the QFIL download.
1. Download Stock Rom and Qualcomm downloader from here
Extract the zip. Install the drivers.
2. QFIL install : Download and install Qualcomm downloader.
It should look like the image in attachments
1. If it shows Flat Build / Meta Build, choose Flat Build.
2. Click "browse" and select "prog_emmc_firehose_8937_lite.mbn" , in the Extracted Stock rom folder
3. Click Load XML and select "rawprogram_unsparse.xml" in the Extracted Stock rom folder.
4. Click Load Patch and select "patch0.xml" in the Extracted Stock rom folder.
5. Click Download. If device is in adb mode, no problem, it will go in download mode automatically.
If it is not, just connect and shutdown device . While it is shutting down, it will connect automatically andf flash will begin.
Do not disconnect while process is on. Be patient.
2. Update to V15 :
After Stock reflash, the update to V15 comes immediately after connecting to internet.
Just incase someone wants to flash it offline , here is the process and file.
1. Recovery Method : Place gobi zip in adb folder . Go to stock recovery. Press Volume up and Power button. Once in recovery, choose "update from adb" .
Enter the following command in cmd console :
Code:
adb sideload update-gobi.zip.
Downloads : Update zip for Version Update from V12 to V15. Link

Yogesh1969 said:
Freinds , this thread is basically for what the title suggests. After a long time I was able to do it.
I'll update as required, so be patient. and keep watching.
1. Unlock Bootloader
a. Boot device in bootloader from adb in cmd terminal, Please enter these commands, one at a time.
2. Flash TWRP
In fastboot mode: continue.......
You can also try
3. Flash patched boot.
4. Rooting
Please copy the SuperSu zip file to your micro sd card.
My advice is to backup your data, then wipe data, dalvik-cache,cache, Internal storage. Sometimes, format option is required.
Now boot to Twrp recovery and flash this zip.
If there are errors anywhere, please tell me and I shall try to correct them.
Downloads
1. TWRP : https://drive.google.com/open?id=0BztfiMqkQrCaQVA4T01pRmlmYXc
Remember first thing before rooting, do a backup of system and boot. Rest is your schoice.
2. SuperSu zip: http://www.supersu.com/download
3. Boot : https://drive.google.com/open?id=19StfSorHM8T89uX07epstCWIUnMsITjz
Click to expand...
Click to collapse
Thanks for help bro. But the tarp zip file u shared needs a password to be opened.

Sorry
partha_h said:
Thanks for help bro. But the tarp zip file u shared needs a password to be opened.
Click to expand...
Click to collapse
Sorry Parth. I linked a wrong image . I now have updated the link. please check and tell me. Dont' hurry in any process. Take care.

Yogesh1969 said:
Sorry Parth. I linked a wrong image . I now have updated the link. please check and tell me. Dont' hurry in any process. Take care.
Click to expand...
Click to collapse
Thanks
Rooted my device successfully. Solved the twrp data decrypt password issue. Mounted super su via usb and my device is successfully rooted.
Thanks again
Now it's time to search for custom roms. Suggest me any ROM u recommend

partha_h said:
Thanks
Rooted my device successfully. Solved the twrp data decrypt password issue. Mounted super su via usb and my device is successfully rooted.
Thanks again
Now it's time to search for custom roms. Suggest me any ROM u recommend
Click to expand...
Click to collapse
Glad to hear that. I don't have any information about specific roms for swipe but we may have to port any aosp or lineage roms for our chipset (msm8937). Once I'm free, I'll get to search that. ....

partha_h said:
Thanks
Now it's time to search for custom roms. Suggest me any ROM u recommend
Click to expand...
Click to collapse
I have ported an AOSP for Redmi 3s. But it has flaws,(wifi, etc.) will take time. Also, I have removed all unwanted apps from the stock. So it is now smaller.

Sorry repeated msg

Yogesh1969 said:
I have ported an AOSP for Redmi 3s. But it has flaws,(wifi, etc.) will take time. Also, I have removed all unwanted apps from the stock. So it is now smaller.
Click to expand...
Click to collapse
Pls share if there is any . Thanks

partha_h said:
Pls share if there is any . Thanks
Click to expand...
Click to collapse
Actually, AOSP and lineage Os ,both are ported successfully. But there are some flaws. Time is a major factor.
Also, I think Our Rom is better than these roms. From twrp I removed all useless apps. So memory has increased a bit.
So, i think instead of marshmallow I should try Nougat or Oreo if possible. Of course time is an enemy . Just hope.

Yogesh1969 said:
Actually, AOSP and lineage Os ,both are ported successfully. But there are some flaws. Time is a major factor.
Also, I think Our Rom is better than these roms. From twrp I removed all useless apps. So memory has increased a bit.
So, i think instead of marshmallow I should try Nougat or Oreo if possible. Of course time is an enemy . Just hope.
Click to expand...
Click to collapse
Hi. U r doing great. Android 7 or 8 would be gud option. Keep up the good work. Thanks

Some one plz send build.prop file of swipe elite max
Some one plz send build.prop file of swipe elite max

Your build.prop attached.
Sachin2015 said:
Some one plz send build.prop file of swipe elite max
Click to expand...
Click to collapse
Is something wrong with your phone or just experimenting ?
Anyways, there are two build.prop files in the system folder, so attached both. good luck.

Yogesh1969 said:
Is something wrong with your phone or just experimenting ?
Anyways, there are two build.prop files in the system folder, so attached both. good luck.
Click to expand...
Click to collapse
Thanx Dude.
How to enable VoLTE for airtel user in this phone ?
How to write imei on this phone ?
and can u send a updated baseband file for this ?

Sachin2015 said:
Thanx Dude.
How to enable VoLTE for airtel user in this phone ?
How to write imei on this phone ?
and can u send a updated baseband file for this ?
Click to expand...
Click to collapse
Hi. This is a very late reply . Sorry for that.
To enable volte, you have to go to
Settings>More>Cellular networks.
Here, you have to enable/On Enhanced 4G Lte mode.
But, you have to remember, few things. Our phone has only one 4g and one 2g slot. You can use any slot for 4g. The other will automatically turn to 2g. This happens when you choose data for that sim.
Another problem you will face if you have the other sim of JIO. It works only in 4g. So if you awnt volte /4g on Airtel and other sim is Jio, you will have no network on Jio as it does not work in 2g/3g.
For Imei , just google SN / IMEI writing softwares from the net. But mind you enter the right IMEIs, as you mind land in trouble if non-matching one is written.
What base band file do you want ? The firmware folder ?

Yogesh1969 said:
Hi. This is a very late reply . Sorry for that.
To enable volte, you have to go to
Settings>More>Cellular networks.
Here, you have to enable/On Enhanced 4G Lte mode.
But, you have to remember, few things. Our phone has only one 4g and one 2g slot. You can use any slot for 4g. The other will automatically turn to 2g. This happens when you choose data for that sim.
Another problem you will face if you have the other sim of JIO. It works only in 4g. So if you awnt volte /4g on Airtel and other sim is Jio, you will have no network on Jio as it does not work in 2g/3g.
For Imei , just google SN / IMEI writing softwares from the net. But mind you enter the right IMEIs, as you mind land in trouble if non-matching one is written.
What base band file do you want ? The firmware folder ?
Click to expand...
Click to collapse
not showing any network..need the modem files

Sachin2015 said:
not showing any network..need the modem files
Click to expand...
Click to collapse
Did you get the files ? If you want the firmware folder, im attaching here.