Related
1. LG Flash Tool
This is the flashing tool that will let you install:
Any .kdz firmware. Ex. V10C_00.kdz
KDZ Files Available:
FROYO
V10C_00.kdz
V10D_00.kdz
V10E_00.kdz
V10K_00.kdz
GINGERBREAD
V20A_00.kdz
V20B_00.kdz
V20C_00.kdz
V20E_00.kdz
V20F_00.kdz
V20P_00.kdz - Official AT&T Gingerbread
V21A_00.kdz
V21B_00.kdz
V21D_00.kdz
V21E_00.kdz
Requirements:
You'll need to have the LG Thrill / Optimus 3D
All your data backed up
All LG Drivers Removed
DOWNLOAD LINK: LG Flash Package - 50 MB
How To Use:
Step 1
Download the .kdz file you want to flash
Extract the files with WinRar or 7zip
Uninstall all LG drivers
Restart computer
Step 2
In the "Drivers" folder, install the "LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe" file
In the "Software" folder, install the "B2CAppSetup.exe" file
In the "SERVER" folder, launch the "shttp3.exe" file
An error may or may not pop up. Just click OK
Check the "I agree with this license, and I accept all items."
Check the "Update entry in main menu."
Check the "Add to startup."
Make the password "admin"
Click "Install"
Launch the "Small HTTP server" from the Start Menu
MINIMIZE the popup. If you close it, the server will quit.
On the TaskBar, a new icon should appear. Right click the icon and go to "Settings"
Select the "HTTP" tab and change the "Port" to "9002"
Click "OK" in the top right corner
Step 3
Navigate to "C:\shttps" on the hard drive
Copy the contents of "WWW Folder" into the "C:\shttps\www" directory
Navigate to "C:\Windows\system32\drivers\etc" on the hard drive
Copy the "hosts" file in "C:\Windows\system32\drivers\etc" to the "ORIG" folder in the LG Flash Package
Delete the "hosts" file from "C:\Windows\system32\drivers\etc"
Copy the "hosts" file from the "MOD" folder in the LG Flash Package to "C:\Windows\system32\drivers\etc"
Step 4
In the "FLASHING" folder, launch "Windows Enabler.exe"
A new icon should appear on the TaskBar. Click the icon to turn it to the "ON" position
In the "FLASHING" folder, install the "msxml.msi" file
Step 5
Open Device Manager
Windows XP - Right Click "My Computer", click the "Hardware" tab, and select "Device Manager"
Windows Vista/7 - In the Start Menu search bar, type "Device Manager" and select it at the top
Unplug your phone (If it is plugged in)
Take out the battery
Step 6
Check Device Manager for the current active "COM Ports"
Boot into DOWNLOAD MODE
Plug the phone into the computer without the battery inserted
Hold [VOL UP + POWER]
Put the battery in and wait until it vibrates or for 3 seconds
Check Device Manager for a NEW "COM Port"
If there is not a new "COM Port", restart Step 5
Step 7
Launch the "UpTestEX_mod2_marwin.exe" file
Change the product type located under the LG Electronics logo to "3GQCT"
Change the PhoneMode to "EMERGENCY"
Navigate to your .kdz file in the "Select kdz file" box
Click "Normal web upgrade test" at the bottom
Click "Upgrade Start" on the pop up screen
On the "Select Country & Language" box, click "Clear phone Software udpate Registry"
Change "Country" to "Different Country"
Change "Language" to your language
Click OK
Your phone is now flashing. DO NOT TOUCH THE PHONE AT ALL. DO NOT UNPLUG THE PHONE.
Step 8 : Varies
If your phone boots properly, ignore this.
Part 1: Booting into recovery
If your phone does not boot and you are stuck in a boot loop:
Boot into RECVOERY MODE
Hold [VOL DOWN + 3D]
Press the POWER button until the phone vibrates
Part 2: Wiping data in recovery
Use VOL DOWN to navigate to "wipe data/factory reset"
Press the "3D" to select it
Use VOL DOWN to navigate to "Yes"
Press the "3D" to select it
Restart the phone
Step 9 : Optional
Root using one of the three SuperOneClick versions in the LG Flash Package folder
Install ClockworkMod or Touch ClockworkMod Recovery with Recovery Manager
2. Entering APNS
This example is for AT&T "4G" HSPA+ APNs
Getting To The APNs
Go to the "Settings" app
Select "Wireless & networks"
Select "Mobile networks"
Select "Access Point Names"
Setting Up The APNs
Press the Menu button
Select "New APN"
Select "Name"
Change it to "AT&T HSPA+"
Select "Ok"
Select "APN"
Change it to "phone"
Select "Ok"
Select "MMSC"
Change it to "http://mmsc.cingular.com"
Select "Ok"
Select "MMS Proxy"
Change it to "wireless.cingular.com"
Select "Ok"
Select "MMS Port"
Change it to "80"
Select "Ok"
Select "MCC"
Change it to "310"
Select "Ok"
Select "MNC"
Change it to "410"
Select "Ok"
APNs SET!
3. Booting into and Navigating Recovery Mode
Booting into Stock Android Recovery
Boot into RECVOERY MODE
Hold [VOL DOWN + 3D]
Press the POWER button until the phone vibrates
Using Stock Android Recovery
VOL + and VOL - is to move up and down
Press the 3D button to select an option
Booting into ClockworkMod Recovery
Boot into RECVOERY MODE
Hold [VOL DOWN + 3D]
Press the POWER button until the phone vibrates
Alternatively for ClockworkMod:
Go to Settings
Go to Privacy
Choose Factory Reset
It will boot into ClockworkMod.
Using ClockworkMod Recovery
VOL + and VOL - is to move up and down
Press the POWER button to select an option
4. Flashing CyanogenMod 10
Step 1. Revert to Complete Stock Gingerbread
Use the "LG Flash Tool" in this post to do this. [I ADVISE USING V21E]
Step 8 in the guide HAS to be done. Make sure you wipe data.
Step 2. Root Phone
Use "Megatron Root" in the second post to do this.
Step 3. Install ClockworkMod
Use "Recovery Manager" in the second post to do this.
DO NOT USE TOUCH CLOCKWORKMOD.
Step 4. Download CM10 & GAPPS
CM10: DOWNLOAD
GAPPS: DOWNLOAD
Step 5. Boot Into CWM and Flash CM10+GAPPS
Use the "Booting into and Navigating Recovery Mode" Guide if you do not know how to navigate ClockworkMod
[COLOR]DO NOT REBOOT[/COLOR]
Step 6. Wipe Data & Reboot
Wipe the data from CWM and reboot.
You should now be running CM10!
[TOOLS]
1. Recovery Manager
This is a flashing tool that will let you install:
Stock Recovery
ClockworkMod Recovery
Touch ClockworkMod Recovery
Requirement:
You'll need to have the LG Thrill / Optimus 3D
You'll need to be rooted.
Superuser and SU have to be updated to the latest app and binary
Update Superuser in the market
Open Superuser app and go to the options
Scroll to the bottom and click "Su binary"
DOWNLOAD LINK: Recovery Manager - 18 MB
How To Use:
Extract the files with WinRar or 7zip
Launch "Recovery Manager.bat"
Make sure your phone is in "USB Debugging Mode" and is plugged in
Choose your option
Wait for the screen to refresh
Boot into recovery to verify it was flashed successfully
2. Megatron Root
This is a root tool by Dan Rosenberg that will let you root:
V20x Firmware
Any other Gingerbread Firmware that SuperOneClick can't root
Requirements:
You'll need to have the LG Thrill / Optimus 3D
LG P920 Drivers installed
DOWNLOAD LINK: Megatron Root - 1 MB
How To Use:
Extract the files with WinRar or 7zip
Make sure your phone is in "USB Debugging Mode" and is plugged in
Launch "run.bat"
Wait for the phone to reboot
Verify that root is enabled
ROOT DONE!
CM10 (In)Compatible Basebands
This is a list of what basebands are compatible with CM10. If it's not compatible, you will not get any cell reception.
CM10 Compatible Basebands
V21D
CM10 Incompatible Basebands
V20P
V21E
Nice compilation.
Please include links to ROMs
20E - http://csmg.lgmobile.com/swdata/WEBSW/LGP920/AAFRML/V20e_00/V20E_00.kdz
20F - http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/ABUOML/V20f_00/V20F_00.kdz
20E has RTL support and 20F is the latest one available.
omgomg said:
Nice compilation.
Please include links to ROMs
20E - http://csmg.lgmobile.com/swdata/WEBSW/LGP920/AAFRML/V20e_00/V20E_00.kdz
20F - http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/ABUOML/V20f_00/V20F_00.kdz
20E has RTL support and 20F is the latest one available.
Click to expand...
Click to collapse
Alrighty! I'll add them up.
Sent from my Samsung Galaxy S II w/ CM9
This should be a sticky and updated regularly.
Great post
Really nice work - Lestat!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks a lot!!!!
Greetz Paki
Great for newbies..
Great job! But how can I extract the contents of the .kdz firmware file without actually installing it? (Please note that I'm not at all familiar to the LG-way of doing firmware.)
E:V:A said:
Great job! But how can I extract the contents of the .kdz firmware file without actually installing it? (Please note that I'm not at all familiar to the LG-way of doing firmware.)
Click to expand...
Click to collapse
There's currently no point of extracting the contents because they are encrypted.
Sent from my Samsung Galaxy S II w/ CM9
Hello, please help me. i bought optimus 3d p920 from UK, was on stock 2.2.2, had rooted n installed clockwork v5.0.2.0, i have backed up the stock rom via CWR, i software updated from mobile , it was a 4.5mb update n after that the phone is not going past CWR, i tried to restore backup via CWR no luck. please help is my phone is bricked?Thanks
Try to fix permissions.
If it doesn't work, refer on this section to two guides about manually updating via KDZ. It's piece of cake, so don't worry, your phone isn't bricked at all.
Thanks for the reply, i tried to flash kdz file but, after port change step when i try to launch B2CAppSetup.exe , it says no internet connection , connect to internet then continue, even though my net is on. what iam i doing wrong?
Wouldn't work for me. When I got to clicking Start update it jumped straight to the usual update app and told me my phone was on latest firmware... I guess it was to do with the shttp; I couldn't use it because crappy Symantec End Point threw a fit when I extracted the archives so I tried using WAMP (Apache server) and changed the port to 9002 as instructed...
Also my phone went crazy trying to get into download mode. I had to time releasing VOL+PWR when device manager detected the port or it told me I had unplugged it.
After I gave up I had to reboot my phone three times and then set the clock!
I'm stuck with 21a still
sourcewop said:
Hello, please help me. i bought optimus 3d p920 from UK, was on stock 2.2.2, had rooted n installed clockwork v5.0.2.0, i have backed up the stock rom via CWR, i software updated from mobile , it was a 4.5mb update n after that the phone is not going past CWR, i tried to restore backup via CWR no luck. please help is my phone is bricked?Thanks
Click to expand...
Click to collapse
Where did the update cone from? Your service provider?
Sent from my Samsung Galaxy S II w/ CM9
If you need help flashing, download the LG Flash Package, and Recovery Manager. Install TeamViewer and I can flash your phone for you.
Sent from my Samsung Galaxy S II w/ CM9
Right, managed to flash my phone at home on my laptop but after rooting and installing Touch CWM, I finally booted my phone, went through the initial setup wizard and then was asked which launcher app I wanted to use; LG one or GO Launcher???!!!! Bearing in mind that I have formatted the internal and external storage, gone to CWM and done factory reset, where the hell is this coming from? I looked in manage applications and I can see GO Launcher is installed (along with its widgets and themes), ES File explorer is installed and so is AlarmClock Plus... WTF!
I downloaded the KDZ from LG site so I cant see it being dodgy but I am totally confused where it got these apps from and how it installed them... I know you can put .apk files in a certain folder on the sdcard and it will auto install them but I dont have these apk's at all!
Hsd the ROM been really clever and realised I had these apps on before when I tried 21B and found I couldnt root it??
Anyway! Thanks for an awesome guide.. I did have to make a couple of changes to get mine to work...
When installing the B2CApp updater, I had to put the HOSTS file back the orig or it wouldnt install.
When trying to get into Download mode, I had to again time the release of the vol/pwr keys or it said the drivers failed to install...
But thanks a bunch! I am now on V21d
cyberguru said:
Right, managed to flash my phone at home on my laptop but after rooting and installing Touch CWM, I finally booted my phone, went through the initial setup wizard and then was asked which launcher app I wanted to use; LG one or GO Launcher???!!!! Bearing in mind that I have formatted the internal and external storage, gone to CWM and done factory reset, where the hell is this coming from? I looked in manage applications and I can see GO Launcher is installed (along with its widgets and themes), ES File explorer is installed and so is AlarmClock Plus... WTF!
I downloaded the KDZ from LG site so I cant see it being dodgy but I am totally confused where it got these apps from and how it installed them... I know you can put .apk files in a certain folder on the sdcard and it will auto install them but I dont have these apk's at all!
Hsd the ROM been really clever and realised I had these apps on before when I tried 21B and found I couldnt root it??
Anyway! Thanks for an awesome guide.. I did have to make a couple of changes to get mine to work...
When installing the B2CApp updater, I had to put the HOSTS file back the orig or it wouldnt install.
When trying to get into Download mode, I had to again time the release of the vol/pwr keys or it said the drivers failed to install...
But thanks a bunch! I am now on V21d
Click to expand...
Click to collapse
That is strange indeed. I haven't downloaded V21D so I wouldn't know, but you did a data wipe in recovery?
Sent from my Samsung Galaxy S II w/ CM9
Yep, did a full wipe in recovery before doing anything...
Not to worry though, I removed the apps and then took a backup of the ROM for future use!
HEY dark its me it was starting to load but in the middle of the process it said communication error or something?
Originally Posted by suunnittelija View Post
I was able to root my ZTE V985 couple days ago. Download root installation package from:
http://pan.baidu.com/share/link?shar...&uk=2753639880
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
http://bbs.gfan.com/android-5226211-1-1.html
And Google translation:
http://translate.google.com/translat...26211-1-1.html
THE DEVICE IS NOW SUCESSFULLY ROOTED PLEASE POST ROMS/CUSTOMISATIONS/CWM/MODS + GUIDES ALSO AND ANY OTHER INFO ON THIS PHONE! THANKS.
alz_uk said:
Originally Posted by suunnittelija View Post
Click to expand...
Click to collapse
After rooting, you can download Google Play installer from here:
http://pan.baidu.com/share/link?shareid=126684&uk=1176017033
After installing, run this app. Slide blue button from Google Play logo to the phone logo. See attached picture.
suunnittelija said:
After rooting, you can download Google Play installer from here:
http://pan.baidu.com/share/link?shareid=126684&uk=1176017033
After installing, run this app. Slide blue button from Google Play logo to the phone logo. See attached picture.
Click to expand...
Click to collapse
Man your awesome, I was just about to get to that problem and what do you know took the words right outta my mouth.
HELP!!! Need ENGLISH recovery mode for chinese ZTE V985
Hi all, someone please post information on replacing the ZTE V985 chinese stock recovery mode to ENGLISH recovery mode!!!!!!
BUMP!
Bump!
alz_uk said:
Hi all, someone please post information on replacing the ZTE V985 chinese stock recovery mode to ENGLISH recovery mode!!!!!!
Click to expand...
Click to collapse
I found custom recovery from here:
http://pan.baidu.com/share/link?shareid=271693&uk=973327405
I think it is in Chinese, I have not installed it yet.
Does anyone knows that is it possible to build new recovery by using http://builder.clockworkmod.com/ and does it change the language to English?
I tried that tool by using Chinese recovery.img. It created new recovery.img successfully without any errors, but I have not tried it yet. Is it safe to use? I used builder just with recovery.img but without recovery.fstab because I wasn't able to find it.
What if the device fails to boot? I do have original firmware on .zip file, but not sure is it possible to boot and install original firmware from SD card.
ZTE stock recovery is actually in english !!!!
alz_uk said:
Hi all, someone please post information on replacing the ZTE V985 chinese stock recovery mode to ENGLISH recovery mode!!!!!!
Click to expand...
Click to collapse
My bad didnt check beforehand, it seems the stock recovery mode on the zte v985 is actually in english which allows to flash roms from zip files placed on the root directory of the micro sd card.
To enter ZTE Recovery Mode do as follows: Firstly power off device then Hold down volume down key and then hold down power key, when the zte logo appears on screen let go of the power key but still keep the volume down key held you will enter zte recovery mode which will allow you to wipe data, update from micro sd card etc.
Hope this helps.
alz_uk said:
Originally Posted by suunnittelija View Post
I was able to root my ZTE V985 couple days ago. Download root installation package from: DEAD
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
DEAD
And Google translation:
DEAD
THE DEVICE IS NOW SUCESSFULLY ROOTED PLEASE POST ROMS/CUSTOMISATIONS/CWM/MODS + GUIDES ALSO AND ANY OTHER INFO ON THIS PHONE! THANKS.
Click to expand...
Click to collapse
Hi, all links are dead for rooting ZTE grand Era. Does someone have valid links please ?
Thank you.
O_Neill31 said:
Hi, all links are dead for rooting ZTE grand Era. Does someone have valid links please ?
Thank you.
Click to expand...
Click to collapse
hello, anyone knows if exists any ROM for the v985 in 4.1 or miui v5?
david_gn7 said:
hello, anyone knows if exists any ROM for the v985 in 4.1 or miui v5?
Click to expand...
Click to collapse
4.1.2 update was released today. Here's the direct link for download:
http://pan.baidu.com/share/link?shareid=3082485858&uk=3442944625
It's recommended to update first from B03 to B04 and then do the 4.1.2 update. Here's the link for 4.0.4 B04:
http://pan.baidu.com/share/link?shareid=3921007642&uk=3945654451
How to do 4.1 update. Remember to backup first!:
1. Download V985_update_4.1.2.7z upgrade package file and unzip the file. Under the folders there's update.zip.
2. Copy update.zip to the external SD card root directory
3. Enter the "Settings" -> "System Software Updates" -> "Storage card upgrade." and uncheck "retain user data upgrade". If this is checked, it will cause some issues and the phone might not boot.
4.Click the OK button to upgrade. Upgrade process starts automatically after a few seconds.
Root & recovery:
http://pan.baidu.com/share/link?shareid=4088477952&uk=1178049129
How to root ZTE V985 4.1.2 Jelly Bean
Hi, it seems that ZTE has brought a new android version to the V985 called 222200B1329ZTE V985V1.0.0B04.
I have a V985 with android 4.0.4 version B03 installed, rooted and equipped with Gapps. I can only upgrade into stock which removes my root and Gapps.
Can anyone tell me how to root the V985V1.0.0B04 android 4.1.2 version?
Thanks
I was able to compile and run fully working clockworkmode recovery from CM10.1 stream,
I was also able to compile and port CM10.1 to this device. Currently thinking if we could port CM10.2 to this device.
CM 10.1
moskvicheff said:
I was able to compile and run fully working clockworkmode recovery from CM10.1 stream,
I was also able to compile and port CM10.1 to this device. Currently thinking if we could port CM10.2 to this device.
Click to expand...
Click to collapse
I will look forward for your posts, I'm very interested about CM 10.1 on my V985, great job! :good:
edusturke said:
I will look forward for your posts, I'm very interested about CM 10.1 on my V985, great job! :good:
Click to expand...
Click to collapse
Thanks!
I'm currently stuck with Wifi, I also have kernel sources for this device. Let me know If you'd like me to post the link on it.
I'm looking for any assistance in porting Cyanogen mod to this device to make it fully operational.
P.S. I neet at least 10 posts to be able to post links
Regards,
Sergey
Phone won't start!
I have installed 4.1.2 update on my v985, but it was draining my battery very fast, i tried to install back to B04, but it was not working, i couldn't install. Then i tried to install Clockwork Recovery and now phone won't start, iz just turns on ZTE logo and stops!
Help please!! Is there anyway to unbrick my phone?
Phone is something like read only
I have a v985. I received it rooted, but a lot of message was in Chinese an it did not download my contacts from gmail.
I've flashed all ROMs that I found, finaly I'm stuck in "enterprise_V985_signed_101613_1017.zip".
Google play does not start. It just flashes up.
I have a Chinese application search app, where I can install apps. It seems to be installed, but the app is nowhere.
I can boot into recovery, but I can't wipe or format at all. Nothing.
I can run "install zip", it loads the zip, the commands are started, it writes that it is OK, but does not change the phone at all.
The strand that I can make photo, it is saved, I can copy files to phone and to sd card...
What can be the problem?
hello there! It seems to be quiet here, did someone solve the problem? I have also this zte version, all things is working correctly except the battery, the current rom is ics 4.0.4 v985v1.0.0B03, the android system consumes itself about 50% of battery everyday even when the phone is in standby, I would like replace the kernel with a new one, if someone has some ideas I'm very interested. :good:
can some1 tell me how to boot on recovery mode? pls tell me.. pls pls pls pls i want to install clockwerkmod thanks in advance :good:
.
im using cherry mobile amethyst s610.. i search everything in the google.. nothing happens..
How to Root and install CWM
I'm also using Cherry Mobile amethyst and i already rooted and installed CWM recovery. I'm going to teach u how to do that. but i used the ROM Manager Pro to go to the Recovery Mode.
1. You have to Root your android phone using Framaroot (Latest version) and you have to download and install the ROM Manager Pro.
Note: Warranty Void
http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 from: alephzain
- Just click the word "Barahir" and wait for the confirmation successfully rooted and reboot your phone.
2. After That, You need to Download the "MTK Droid Tools" , "SP Flash Tools" and MTK Driver. (Search the net for Download)
-install the MTK Driver, Wait for the automatic detection of the device and Click manual install then go to downloaded drivers.
3.Open MTK Droid Tools, then wait to process the Phone Information. You have to Click the "BLOCKS MAP" and after the other window Pop-up with Block Info, Click "SCATTER FILE". This File should be save because it is very important for your device with the name "MT6572_Android_scatter_emmc.txt". Do not Close the MTK Droid Tool.
4. Open the SP Flash Tool, Click "Scatter-Loading" and search the file that you saved earlier with the name "MT6572_Android_scatter_emmc.txt" and Go to "READ BACK TAB". Click "ADD" and the file added at the bottom and Click the File and save it as "ROM_0". You should turn off your Phone. Then Connect it to USB Cable, Unplug the battery first then Click the "Read back Button" and Plug the battery to detect the device and this will be done successfully. You do have "ROM_0" File. DOnt Close SP Flash Tool.
5. Go back to MTK Droid Tools, you can now backup you phone first.Go to "root, backup, recovery" tab, Click "To Process File ROM_* from flash Tool" and select the "ROM_0" you saved earlier. Wait for the task to complete, When the message box appear "Do you want cwm automatically installed", just click "YES".
(Do it with your own Risk, Note: I am not responsible for any Damage, Lost of your data, The Process of flashing will reset your phone into factory reset or it can brick your phone when the procedure is wrong.)
6. After that you can re-flash your stock ROM.Go to SP Flash Tool Again, Then Click Again the "Scatter-Loading" and go to the MTK Droid Tool" Folder named "backup", you will see the backup file you saved a while ago when you process the "ROM_0" File. Open The Folder with the name "S610_******_backup" or "S610_******_ForFlashtoolFromReadBack", you will see the file "MT6572_Android_scatter_emmc.txt" again". after that, all the IMAGE File from your phone will appear on the bottom of SP Flash Tool, Look the name "recovery", if it has File Location, Just chage it, go to "MTK Droid Tool" Folder then open "recovery" folder, you will see the file named "S610_******__recovery_140423-203622.img" and rename it to "recovery.img".
7.Just Click the "Download" button and Unplug and Plug your battery again to detect the Phone. wait it until it done.
8. After the Process completed, Open your Device, install ROM Manager Pro, and when installation completed. Open the Application and Click Reboot into Recovery.
9. The Phone Will reboot and now go to Recovery mode
10. Goodluck
yuwishinu said:
I'm also using Cherry Mobile amethyst and i already rooted and installed CWM recovery. I'm going to teach u how to do that. but i used the ROM Manager Pro to go to the Recovery Mode.
1. You have to Root your android phone using Framaroot (Latest version) and you have to download and install the ROM Manager Pro.
Note: Warranty Void
http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 from: alephzain
- Just click the word "Barahir" and wait for the confirmation successfully rooted and reboot your phone.
2. After That, You need to Download the "MTK Droid Tools" , "SP Flash Tools" and MTK Driver. (Search the net for Download)
-install the MTK Driver, Wait for the automatic detection of the device and Click manual install then go to downloaded drivers.
3.Open MTK Droid Tools, then wait to process the Phone Information. You have to Click the "BLOCKS MAP" and after the other window Pop-up with Block Info, Click "SCATTER FILE". This File should be save because it is very important for your device with the name "MT6572_Android_scatter_emmc.txt". Do not Close the MTK Droid Tool.
4. Open the SP Flash Tool, Click "Scatter-Loading" and search the file that you saved earlier with the name "MT6572_Android_scatter_emmc.txt" and Go to "READ BACK TAB". Click "ADD" and the file added at the bottom and Click the File and save it as "ROM_0". You should turn off your Phone. Then Connect it to USB Cable, Unplug the battery first then Click the "Read back Button" and Plug the battery to detect the device and this will be done successfully. You do have "ROM_0" File. DOnt Close SP Flash Tool.
5. Go back to MTK Droid Tools, you can now backup you phone first.Go to "root, backup, recovery" tab, Click "To Process File ROM_* from flash Tool" and select the "ROM_0" you saved earlier. Wait for the task to complete, When the message box appear "Do you want cwm automatically installed", just click "YES".
(Do it with your own Risk, Note: I am not responsible for any Damage, Lost of your data, The Process of flashing will reset your phone into factory reset or it can brick your phone when the procedure is wrong.)
6. After that you can re-flash your stock ROM.Go to SP Flash Tool Again, Then Click Again the "Scatter-Loading" and go to the MTK Droid Tool" Folder named "backup", you will see the backup file you saved a while ago when you process the "ROM_0" File. Open The Folder with the name "S610_******_backup" or "S610_******_ForFlashtoolFromReadBack", you will see the file "MT6572_Android_scatter_emmc.txt" again". after that, all the IMAGE File from your phone will appear on the bottom of SP Flash Tool, Look the name "recovery", if it has File Location, Just chage it, go to "MTK Droid Tool" Folder then open "recovery" folder, you will see the file named "S610_******__recovery_140423-203622.img" and rename it to "recovery.img".
7.Just Click the "Download" button and Unplug and Plug your battery again to detect the Phone. wait it until it done.
8. After the Process completed, Open your Device, install ROM Manager Pro, and when installation completed. Open the Application and Click Reboot into Recovery.
9. The Phone Will reboot and now go to Recovery mode
10. Goodluck
Click to expand...
Click to collapse
thanks a lot !!!!! u're such a big help!! :good:
oh yeah, i forgot.. did you boot on downloading mode or you just turn off your phone?
Help! i need stock rom for amethyst
sr, can you up your amethyst stock rom backup,.here plsssss? im stock at boot logo,.,help plssss,., thanks,.
Heaven0918 said:
sr, can you up your amethyst stock rom backup,.here plsssss? im stock at boot logo,.,help plssss,., thanks,.
Click to expand...
Click to collapse
try flashing the rom again
please upload stockrom.. im on bootloop no cwm recovery yet.. huhuhuhu
please need stock rom for amethyst im in boot loop too :crying::crying::crying::crying::crying:
thread: [q] cherry mobile amethyst s610 Logged in as shield89 Image Verification
balot.ko said:
try flashing the rom again
Click to expand...
Click to collapse
what is the shortcut keys for recovery mode? you can't do it if hangups to boot logo...
balot.ko said:
can some1 tell me how to boot on recovery mode? pls tell me.. pls pls pls pls i want to install clockwerkmod thanks in advance :good:
Click to expand...
Click to collapse
mobile uncle tool po tas recovery.img po.. pag mag CWM.. )
Volume up+Powerbutton (hold) saksak mo Charger, wait.
I have just bought t this afternoon. after I could not copy one file to the system folder, I set permission for this folder as 644. then my screen phone turned black and could not reboot. I tried to reboot it over and over but it failed again. on the start screen, it shows an android icon with phrase "No command". I could not enter any function above it (reboot system now, apply update from sdcard...)
I have downloaded a stock rom from the internet but did not know how to flash it. can anyone help me plz? thank so much
enter recovery mode and flash via recovery you will get all the information from your device thread here
http://forum.xda-developers.com/t/lenovo-a328
you can donwload the recovery or anything from there and all info will be available in the device specified section
Hi everybody,
For the owners of Samsung Galaxy Tab 3 lite (SM-T116NQ)!
We now can also get ROOT permissions on our tabs, just follow the guide below! Just make sure you have the right drivers installed on your computer for the Tab 3 lite SM-T116NQ!
Do this on your own risk, I am not responsible for problems on your tablet! (if you face any, which i dont think you will. Because I didnt face any problems!)
GUIDE FOR ROOTING SM-TT16NQ!
1. First download this TWRP Recovery image.
Link TRWP Recovery - > www100 zippyshare com/v/pML0LCKw/file.html
(put the dots next to the word "zippyshare", to make the link working!)
2. Make sure you have the latest ODIN software on your computer, if not you can download below this.
Link Latest ODIN - > www odindownload com/SamsungOdin
(put the dots next to the word "odindownload", to make the link working!)
3. After downloads finished and you have installed ODIN on your computer. Put your TAB 3 lite SM-116NQ in "Download Mode".
4. Then connect your tablet to the computer with you samsung usb - cabel.
5. Open ODIN software and in options make sure "Auto-Reboot" and "F-Reset Time" has been checked on.
6. Now click on "AP" (the second box) and search for the TWRP recovery file you have downloaded.
7. After you found the file just press on "START" and let the program do his work.
8. When is finished you will see left up "PASS" meaning that the recovery has been flashed succesfully!
9. Now you should reboot in to recovery and will see TWRP recovery, Just follow the guid on the tablet screené
10. After you can reboot your tablet again. And download Supersu from store or the Internet Browser.
11. Install Supersu which will go without any problem now!. After Reboot you should have ROOT acces.
To Check if you have root acces, just download the app below from Google play store.
Root Check --> www play.google com/store/apps/details?id=com.joeykrim.rootcheck&hl=tr
(put the dots next to the word "play.google", to make the link working!)
If you occur any problem with this guide, reply here. I will try to help you out!
Goodluck! :fingers-crossed:
Works also on sn-t113
hi
Hi I'm using the same model
But it runs very slow on version kit Kat 4.4.4
I wanted to ask if there is a lollipop rom for this TABLET , please help me if there is a way to install higher android versions.
The link doesn't work!
Can you please upload a proper link.
Thank you
the link works perfect. http://www100.zippyshare.com/v/pML0LCKw/file.html