Hello guys, i'm new on the world of Android and i need a little help. I'm newbie but i learn fast.
I got a new phone with android 4.4.2 China honor 3 (fake), after uninstalling some China app the operation system started to stuck at logo at the start.
So to solve the problem i red that i could restore the old OS using ROM file. The factory where i bought the phone sent me the official ROM file for my phone.
Now i entered on Recovery mode, first i did "wipe data/factory reset", then with ADB i loaded the file .zip "adb sideload update.zip". But how the file is uploaded it says "Installation aborted", without any error.
So now i need your help how can i restore this system... I tried also to buy an SD card 8 gb and upload the file on the SD, but same error.
Thank you for your help!
try this guide
http://forum.xda-developers.com/showthread.php?t=2517943
bcuz you can;t flash rom with stock recovery so you install cwm mod from this guide:fingers-crossed:
3lo0sh said:
try this guide
http://forum.xda-developers.com/showthread.php?t=2517943
bcuz you can;t flash rom with stock recovery so you install cwm mod from this guide:fingers-crossed:
Click to expand...
Click to collapse
Thank you for the answer. But wheni try to run TouchRecoveryLoader.zip from recovery, it says "installation aborted" like for the ROM.
I dont know if the phone got root access, i think this can be the problem.
Can youhelp me?
Thank you
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
shayolz said:
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
Click to expand...
Click to collapse
if you open the zip file you got, whats inside it? is it a .tar file, or a .md5 file?
Sorry, i didn't write that i SOLVE the problem!
I userd flash tool selecting only "ANDROID" and pointing to the system.img of the ROM that the factory gave me.
Android reinstalled, all working fine.
/closed
thanks
Hi guys . I need your help ..
I have a Firefly Intense X and i rooted it using Kingo and it works fine .. Then I downloaded Pimp My Rom to customized my rom .. I had fun customizing it and it always works fine. Then i'm not contented with my phone's performance so I adjusted it again until I bump in to the adjusting its dpi. I'm not sure if its under Dalvik VM or kernel tweaks .. Then adjust another thing . I don't remember what it is but I remember that it has 'step n1' then again , I adjust something then I click the last step the 'step n(x) - reboot' . then after that , it reboot over and over and over again .. I mean it will show the Company logo the the boot animation then it will go to the homescreen then says download failed after a few seconds , it will go back to the boot animation then go to the homescreen then reboot the again and again and again ..
My phone is recognized by the computer at the device manager under Adb Interface as HTC Dream but my phone is Firefly Mobile. I thought it will appear under 'Other devices' with a yellow warning sign but it's now . I'ts under Adb Interface. I tried to unistall it many times but it is always an HTC Dream. I also downloaded the adb setup 1.4.2 .
I wipe factory data and cache but it is still happening. I already try to go to the fastboot and unlock but i can't unlock it . It says volume up for yes and volume down for no, I click my volume up and nothing is happening. And I also tried to " adb push <filename> /sdcard/. " and it says 'no such file or directory' but the file name I inserted is correct and it is placed to the correct folder. I also tried to removed my sdcard and direct it at my pc and put a new downloaded custom rom and insert it again to my phone but I can't find it when I choose to 'apply update from sdcard'.
NOTE:
I can go to recovery mode and fastboot mode (locked) only not on a CWM.
Please please please .. I need a solution for this problem. And if you have please make it a step-by-step process.
I need you guys .
PLEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASE
Hi,
Thanks for using XDA Assist Please post here Android Q&A, Help & Troubleshooting
Good Luck!
Thread Closed.
I am not a android guy but faced lot of challenge in finding the Stock ROM for Alcatel Flash or TCL 6042D or Alcatel 6042D. Found one here but having few corrupted files due to which "settings" "message" and few others didn't worked well and in fact frequent crash. Fortunately I had another 6042D to my relative and I took CWM backup of that device and would like to share with you.
Please follow the following steps and don't do otherwise, as only these settings worked for me, other settings may not work. Please Note That these steps are applicable provided that required driver for that device is installed properly.
STEP-A: Download these three files. Please add https: to all links.
1. Stock Recovery and Scatter File package.
//drive.google.com/file/d/0B-BBKAO9380FSkI0UUMxNDc4WEk/view?usp=sharing
2. SP Flash Tool Software
//drive.google.com/file/d/0B-BBKAO9380FRjV2dF81c1VLY1E/view?usp=sharing
3. CWM Backup package
//drive.google.com/file/d/0B-BBKAO9380Fb0NoWTNTLWhtQjA/view?usp=sharing
4. Extract the three files
STEP-B: Recovery Install. No root required
1. Go to sp flash tool folder and run it.
//drive.google.com/file/d/0B-BBKAO9380FMU1NUlFZQzFVNWc/view?usp=sharing
2. Then load scatter for the device from "SPtool_stock_recovery_scatter_OT6042D" folder.
//drive.google.com/file/d/0B-BBKAO9380FRFZPRElfdDAwR0E/view?usp=sharing
//drive.google.com/file/d/0B-BBKAO9380FWmhXZmlDLU5oQzQ/view?usp=sharing
3. If scatter file loaded successfully then you will see "boot" and "recovery" is marked. You must unmark or deselect the boot file. Then double click the recovery file to choose a recovery. Do not choose the recovery from "SPtool_stock_recovery_scatter_OT6042D" folder.. Choose the recovery from "\clockworkmod\backup\2015-10-16.14.26.59\recovey.img". Then press download button.
//drive.google.com/file/d/0B-BBKAO9380FUmtsMHI2WTRMakU/view?usp=sharing
//drive.google.com/file/d/0B-BBKAO9380FQzJLNjB2cDNiQ2M/view?usp=sharing
4. Connect your phone to Computer USB. Then turn the Phone completely OFF. Then after few seconds you will see the SP flash tool is working and sending file. File transfer rate and status will be shown in status bar.
5. If things are ok then you will see a Green Circle as "OK" symbol. And you are done with installing CWM recovery. Now turn the Phone ON.
STEP-C: Installing Stock ROM
1. Copy the extracted "clockworkmod" folder to the root directory of microSD card.
2. Turn OFF the Phone and wait for vibration. After vibration press "UP VOLUME + DOWN VOLUME + POWER" key same time and wait to see Alcatel logo. Release the buttons.
3. You should see the CWM recovery screen. Now follow the steps
wipe data/factory reset
wipe cache
Goto Advance then wipe dalvic cache and go back
backup or restore
restore
Choose the file from "clockworkmod\backup\2015-10-16.14.26.59"
chose yes in confirmation screen
Wait to see "restore from SD card complete"
4. reboot system now. First boot will take some time . Have patience.
Links are from Google drive. Sometimes google does not allow download of zip files. Let me know if it happens.
Thanks and Jajakallahu Khairan
1$ payment error
i have flashed the image file, and the system prompts for making 1$ payment, however the system prompts an error system ui not responding, now i am unable to make payment and unable to use the phone either
Hi guys,
Sorry to bother you with that but i have an issue with my Nexus 5 and i wanted to have more information about a " solution " i found on the web.
So First, my phone got a problem with the power button (on the motherboard). I managed to find a repair shop doing that kind of repair.
Now's the real problem !
The phone won't go further than the " Google " logo.
I can access Fastboot mode but not recovery mode.
The phone is not root, official stock rom, bootloader locked, usb debugging mode : OFF.
I find something on the web but it seems the guy who write it down skipped some steps. And i'm a total noob at that so i don't understand how he managed to do what he described.
Here's the link :
(Ok so i can't post link since it's my first post.... so i will C/P his method here)
METHOD :
Things you will need
Download the Stock ROM for your device- Just Google it, I am dam sure you can find it.
Download SuperSU from UPDATE-SuperSU-v1.65.zip
UPDATE-SuperSU-V1.65.zip contains :
Superuser boot permission manager.
Update script (important) etc.
Basic Knowledge of C++ or Java
Notepad++
WinRAR
Steps to Enable USB Debugging Using Recovery Mode
Unzip the stock rom.
Within the extracted folder you will find system.img well extract it too using Ext4 Unpacker
Also extract the Update-SuperSU.v1.65.zip file.
Now open the folder where you have extracted the system.img files
Grab any .apk file from this folder and change the extension from .apk to .zip
And Copy the RSA Certificated to the Update-SuperSU.v1.65 folder (delete previous files if exist)
Also copy the build.prop to the system folder located within Update-SuperSU.v1.65 folder
Located the update-script file within this folder and edit it using Notepad++
You need to update the build.prop file after adding the following line at the bottom
persist.service.adb.enable=1
Next step is updating SQLite Database
Which can be done by adding following code to update-script file
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "UPDATE global SET value=1 WHERE name='adb_enabled'"
Cheers! You have Enabled USB Debugging
Now you can install your custom or stock rom using ADB – USB Debugging.
So basically, i wanted to know if the " solution " was possible to achieve or if the guy is plain dope, so i can backup my personal data before doing a factory reset.
Or if there's another way to backup my data.
Ah ! When i plug my phone on my PC, it isn't recognised as a Nexus 5 but as a Android Interface Bootloader (or something like that).
Sorry for the long post !
Hi, I understand what you're trying to do but I think this is not possible. The tutorial you've find on the web seems pointless to me because it just say you to customize some system files of a stock rom downloaded from google repo without saying to flash anything (or maybe this is what I understood).
Anyway I'm sorry but the only solution to this is to unlock the bootloader and flash a new system image, of course if this is a softbrick.
Have you already repair the power button? And how the phone get stucked on the logo image, bootloop or just freezed?
Hi
Thank you for replying !
The power Burton is repaired.
And to answer your question, it just freeze.
The phone turns on, "Google" logo appears and it stays that way, and after waiting a few minutes it automatically reboot and freeze again when "Google" logo shows again
In my opinion this could be a softbrick caused by something, I don't see any way out exept flashing something new. Fastboot doesn't require usb debugging enabled to work properly but unlock the bootloader means wipe all your data.
Probably your recovery has gone o something is corrupted in the system startup sequence.
You could wait for someone that can help you in another way that I don't know I'm sorry.
Well, i think i will wait and continue to search until this weekend.
Anyway ! Thank you for answering me, that was very kind
Was there anything that could have been the cause if the bootloop? Have you tried wiping /cache & /data from the recovery? If not try booting into stock recovery and preforming a factory reset. Google: "how to open nexus 5 stock recovery" android.gs has good instructions on booting into recovery. After following those instructions navigate to factory reset, press the power button, then hold the up volume button. If this doesn't work then you'll have to unlock your bootloader. But I won't get into that now. Good luck.
FYI: Don't bother with the instructions outlined in your post, they don't pertain to your situation.
Also, I can't post links as this was my first time posting here.
Hi SuBAtomicFlux,
Like i said, i can't access stock recovery, when i'm at the step where the Android robot shows a red warning sign, nothing happens when i do the key combo to enter into the Stock Recovery Mode and after a few seconds, the phone reboots by itself.
But thank you for trying to help me !
Guide for rooting and Twrp installation for Zenfone max ZC550KL 615 MSM 8939 :
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
FILES NEEDED
DRIVERS\TOOLS
a. adb setup; http://www.mediafire.com/file/jsbx6isfpgle319/adb-setup-1.4.3.exe
b. Android usb drivers ;http://www.mediafire.com/file/57fzehmcfqk0y7t/ASUS_Android_USB_drivers_for_Windows_20150212.zip
c.minimal adb and fastboot : http://www.mediafire.com/file/0h36wb7e8aoimvb/minimal_adb_fastboot_v1.3.1_setup.exe
d. Asus bootloader unlock tool for 8939 device : http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
TWRP\ROOT FILES
e. custom recovery image file (Twrp) :
https://www.mediafire.com/file/1kyk0q3b99kcrue/Twrp_3.0.2.img
f. SuperSU file (root) : http://www.mediafire.com/file/dchiph3qkml3u8g/PRO-SuperSU-v2.67.zip
STEP BY STEP GUIDE
1. Download and install adb and Android usb drivers if you don't have them already installed, otherwise, you can skip
2. Download and install minimal adb and fastboot and put icon on desktop
3. Download the Asus bootloader unlock tool .apk file to your device and install like an application in order to unlock bootloader(follow on-screen messages)
4. Boot device into CSC MODE(fastboot\bootloader) and connect to PC via usb cable. (To boot into CSC MODE , press and HOLD "volume up key+power key")
5. open minmal adb and fastboot and enter the following commands:
Code:
[COLOR="Red"]fastboot devices[/COLOR]
hit enter on keyboard and the serial number of your device SHOULD show in minimal adb window, if it does'nt then you've not installed your Android usb drivers correctly !
Code:
[COLOR="Red"]fastboot flash recovery[/COLOR]
after this command press the SPACE KEY ON KEYBOARD AND DRAG THE "CUSTOM RECOVERY IMAGE FILE TO THE MINIMAL ADB WINDOW then hit the enter key on your keyboard and Twrp will be flashed .
IMPORTANT !!
After flashing the TWRP file, you should boot directly into recovery by holding VOLUME DOWN+POWER BUTTON do not allow device to boot into home screen at first boot, otherwise stock recovery will be restored !!!
6. After booting into TWRP , FLASH THE ROOT FILE IMMEDIATELY !
WARNING !
if you don't flash the root file once in twrp, you might encounter a bootloop!
some users report a password prompt while in Twrp, just press "cancel" then go to twrp home screen , WIPE-FORMAT DATA, after formatting data , go back to twrp home screen -REBOOT-RECOVERY , after that flash the root file (make sure your root file is on an external sd card .
Just followed instructions word by word and successfully rooted my Asus Max SD 615 !
Thanks !:good:
Plez upload video..
Please upload video for how to root,twrp and adb installing..because i m a android beginner.
Nandha2335 said:
Please upload video for how to root,twrp and adb installing..because i m a android beginner.
Click to expand...
Click to collapse
Well i guess if you follow it step by step there won't be any problem.If you get stuck at some point just comment here.And installing adb is just like the normal installation of any setup files in windows.Regarding the flashing of twrp there is nothing much to do than the steps mentioned above.If you still need a video go for this.https://youtu.be/kmq2Eyzl3wA NOTE:This video makes use of files for the sd410 model,so don't use the files in that video.Get the files from this post.This video can make you familiarize the process,but steps mentioned here is slightly different.
Nandha
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..
Nandha
Thank u so much bro ..i m following as per u r procedure now my mobile was rooted ...
Nandha2335 said:
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..
Click to expand...
Click to collapse
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193
jide1 said:
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193
Click to expand...
Click to collapse
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Bro how to change notification panel ..and status bar
Nandha2335 said:
Miui 8 rom properly working or not
don't ask me, i didn't post any rom here, ask him https://forum.xda-developers.com/showthread.php?p=73339833
Click to expand...
Click to collapse
Nandha2335 said:
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Bro how to change notification panel ..and status bar
Click to expand...
Click to collapse
Try using gravity box after installing xposed framework.There a lot of graphical tweaks in gravity box.
Internal Storage Files Missing
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.
Place the root file on an external sd card.
jide1 said:
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.
Click to expand...
Click to collapse
Thank for your fast reply. By following your steps, I was successful in rooting the phone but when rebooting back to home screen, the black screen's still there.
kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
I guess you have copied the super su file to external sd card.Formatting data as mentioned by jide1 did remove the encryption for me.If it doesn't work do advanced wipe with only the data,cache and dalvik cache boxes checked.Note:don't check any other box.Then reboot into twrp.Go to mount in twrp and see that your external sd is mounted.Now access the external sd card in install option and you will find the files of super su.
How to get into twrp recovery?
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost
6goyal said:
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost
Click to expand...
Click to collapse
Flash twrp again ,disconnect usb cable from pc, then press and HOLD "volume down" AND "power button" when device vibrates, RELEASE "power button" WHILE still holding "volume down" , that should do the job.
Need stock boot.img
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.
Volker802 said:
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.
Click to expand...
Click to collapse
Download the official firmware from Asus website and unpack the zip file, and you'll see the boot.img file there.