[Q] STAR S5 - General Questions and Answers

HELP! HELP! HELP! Just received my new Start S5 Cell Phone - it's a beauty....BUT can't get the GSM phone to work here in Anaheim. Ca. Tried several GSM carriers (ATT, T-Mobile, Net10). Tried both Slot1 and Slot2 Sim & Micro Sim. NO TOWER CONNECTION. I'm only a block away from a tower! Something in the setup or maybe the IMEI is blocked in the USA. CAN ANYONE HELP?

download mobileuncletools and enter the engineermode of your device. you can check the frequency supported by your chipset. these have to match to the carrier you are using. there are some problems in the US, no problems here in europe at all.

Related

[Q] D2G was unlocked by turbosim. but it have problems..

Hello.
I bought D2G from ebay last month.
It was locked and has bad ESN.
And I unlocked D2G using turbo sim card from ebay.
That item number is 200539432676 and you can search it just type "no cut unlock sim card".
And maybe you can unlock it follow these steps.
0. You need prepare local carrier's sim card, another local phone, D2G
1. Put your sim card in local cellphone and turn on. After it receive signal, pull out the battery and your sim card. (Do not turn off the cellphone before pull out the batt. and sim)
2. Put your sim card on locked D2G with turbosim.
3. Turn on D2G and change the network mode (if you need) and set up the APN
4. Check the data roaming
Settings - Wireless & networks - Data manager - Data delivery - Data roaming
After that, My D2G work with roaming mode. I can use calling, text messaging and 3G internet service thru GSM/UMTS mode.
(I'm living in South Korea and local carrier provide wcdma hsdpa service.)
But my unlocked D2G have two problems.
1. When I use other local sims with turbosim, it's not work. I guess this turbosim
has compatible problem. (Maybe newer sim will not work.)
2. I only can receive incoming call and message(text and MMS) when my D2G was connected on "H"(Hsdpa). I cannot receive that things when signal turned to "3G".
I cannot use D2G for main phone.. Is there any way to connect HSDPA only? I tried to find some apps for do that, but there is no apps for it. If anyone know about the way, Please help me!
Thanks for read my post and please understand my poor english skill
TurboSIM is not the way to go. There are problems with incoming calls not going thru, losing service every now and then/etc
You should really try to unlock the phone by code. Have you tried online unlockers? You may be lucky your phone not to be from the locked down ones and to unlock with ease. Give it a try!
leobg said:
TurboSIM is not the way to go. There are problems with incoming calls not going thru, losing service every now and then/etc
You should really try to unlock the phone by code. Have you tried online unlockers? You may be lucky your phone not to be from the locked down ones and to unlock with ease. Give it a try!
Click to expand...
Click to collapse
I already got code from Ebay seller, and it dose not work.
And now I'm in South Korea so turbosim is only one way unlock it.
And I guess I can use my D2G with turbosim if I can connect Hsdpa only.
Is there any way to do that?

[Q] Network problems with I9000 bought in Singapore, using in Canada

Hi everyone,
I bought a Samsung Galaxy S GT-I9000 (16gb) in Singapore and was using it fine on Singtel's network (signed a contract with them). Now I have moved back to Canada and brought my phone with me assuming that all would be ok to use it with the network here. However I'm having big problems with this one network I just signed up with (Virgin Mobile).
85% of the time I cannot connect to it: voice calls and SMSing won't work nor will the data work on it, the only thing it says is "Emergency calls only". Then at other times everything will seem to connect and work fine - I can make calls and use data.
Virgin Mobile will not support me much because they're thinking it's the phone's problem, if I use the phone they gave me (a lower-end model) it works fine.
Here are some details of my phone:
Firmware version
2 2
Baseband version
I9000DXJPA
Kernel version
2 6 32 9
root (at) SE-S604 #1
Build number
FROYO DXJPA
If I check out the status, it usually says this:
Network
Unknown (switches to VIRGIN when it does work)
Mobile network type
UMTS (switches between that and HSDPA and GPRS)
Service state
Out of service
Mobile network state
Disconnected (switches to connected when working, and even when it's not working sometimes)
I have Network mode set to auto mode (GSM/WCDMA). I've tried to switch it to GSM only but that didn't seem to change anything.
I'm wondering if there's some kind of configuration settings I still need to do with the phone? I'm also wondering if it is the network I'm with right now? Virgin Mobile isn't one of the bigger telcom companies here and I'm thinking that if I switch to one of the bigger telcoms, will it work better?
Something else to add - before I signed up with Virgin I was using my phone with a pre-paid service (called Chatr) for voice only and it was working fine.
I'm sure this phone can support the GSM frequencies here.. can't it?
I also still have the Singtel customizations on the phone. Will it help if I remove it?
Any help would be greatly appreciated!
Thanks a lot!
Ryan
sorry, wrong category..

[Q] sm-n900 note 3 will not work on cellular

I purchasedthis phone in china, and everything looked legit. I even put my sim card in and made a call and it worked. I am in usa now, put my verizon sim card in and on cell service. I noticed on network mode settings there is no "global", and no "cdma" options to pick from. Only options are: GSM ONLY, WCDMA ONLY, WCDMA/GSM auto connect, and LTE/WCDMA/GSM auto connect. One one of these settings it sees verizon, and I get some bars on the top of phone, but when I try to make a call it say I am not regerstered on the network.
Any suggestions? Will this phone work on verizon? Do i need to call verzion to regestor phone? I am a nub and lost, please help.
Can anyone out there help me?
Please let me know what I can do. I did notice this has "root Explorer" installed on it. Does anyone know what I can do to get this phone working on the verizon network?

trying to use a Japanese sim in on originally USA galaxy s5

I came to Japan after speaking0 to sprint about the possibility of using a Japanese SIM card in my phone. They said there'd be no problems I'll just have to unlock the phone before I left which was a completely doable thing by myself without their help. Now once I set up the Japanese sim I can make calls and text but have no access to LTE on my phone. Whenever I'm outside of Wi-Fi range I get a message saying mobile data connection could not be established LTE: ESM - 30 EMM - X I've called Sprint from Japan and tried to resolve the issue, they have walk me through the same steps three different times assuring me that the phone is unlocked on their end and never with a new result. Is there something that I missing it I need to address before I can connect for mobile data connection in Japan with this USA phone.

Samsung Galaxy S8+ (G955F) Partial Carrier Restriction

Hi,
I have a problem with my Samsung Galaxy S8+ (G955F) model. The phone shows Carrier ID: VOD (I guess means Vodafone/Product Code) in Odin Mode in Red Color, the phone is unlocked working on one carrier in all LTE/3G/2G networks but on other carrier it only works in LTE/3G modes and when i switch it to 2G only it doesn't register to a network on this second carrier and as long as i Turn it Back to LTE/3G/2G it registers but to only LTE or 3G.
I believe it is some kind of a partial carrier lock where the phone is locked on some carriers in different network modes.
Its not registering to 2G on Telenor Pakistan Network while it registers on LTE/3G/2G perfectly fine on Zong CMPak.
The phone doesnt require any kind of carrier unlock code or something.
Is there any way to work this around??? I have installed UK BTU Firmware from Sammobile, already debranded and works perfectly fine just not working in 2G mode on this one carrier.
Is there any way to change this product code or something while being on official Stock Firmware?
My Current Service Provider Version is: PAK/PAK/VOD
I want to change this to PAK/PAK/PAK and remove that Carrier ID: VOD thing from the odin mode display.
Please help!!!!!
hi did you find a solution??
Nopes. I just had to change my phone after all the things I tried, It won't go so I had no other option.

Categories

Resources