Database Info

ICS Flash Help

Im trying to flash ICS onto my phone , im following all of the steps but up to where i connect my phone to my computer, i keep getting USB device not recognized on device manager.
Ive reinstalled all of the required device drivers and softwares needed and its still not working. Help?
and if i remove battery and hold vol+ and insert usb, OMAP4430 driver appears on device manager and then dissapears, this keeps going on a loop until i remove the usb cable

xplicitjohn said:
Im trying to flash ICS onto my phone , im following all of the steps but up to where i connect my phone to my computer, i keep getting USB device not recognized on device manager.
Ive reinstalled all of the required device drivers and softwares needed and its still not working. Help?
and if i remove battery and hold vol+ and insert usb, OMAP4430 driver appears on device manager and then dissapears, this keeps going on a loop until i remove the usb cable
Click to expand...
Click to collapse
You have a bad usb cord
Sent from my LG-SU760 using xda app-developers app

wayno140 said:
You have a bad usb cord
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
In which way is it bad? Im using the original LG usb cable that i got when i baught the phone

I dont know it should work mine only shows omap once
Sent from my LG-SU760 using xda app-developers app

anyone have another fix/solution to this?

xplicitjohn said:
anyone have another fix/solution to this?
Click to expand...
Click to collapse
this is an extract from the resurrection guide. See if this helps.
If you plug your Phone on PC without battery, OMAP4430 device appeared for seconds and then disappeared in your Windows Device Manager
(check arsen4oo photo guide in post #3)
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.
You are lucky. Mine doesnt even show the OMAP4430 in device manager.
schubeir

schubeir said:
this is an extract from the resurrection guide. See if this helps.
If you plug your Phone on PC without battery, OMAP4430 device appeared for seconds and then disappeared in your Windows Device Manager
(check arsen4oo photo guide in post #3)
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.
You are lucky. Mine doesnt even show the OMAP4430 in device manager.
schubeir
Click to expand...
Click to collapse
Mine shows up once I have unplugged and plugged it in a million times using the resurrection guide and it never catches it I asked for help in the guide thread and nobody replied so I am sending it to LG maybe I hope they take it and when I get a new logic board I will try again lol but this time I will do the flash tool and flash both files at once not one at a time like somebody said you should I wish someone could team viewer me and see if I got everything correct but no help for me
Sent from my LG-SU760 using xda app-developers app

Mine did this after I installed the ICS update. OMAP4430 flickering in Device Manager. Watch your phone while holding power+vol_up and after about 3 seconds you will see recycling arrows and a bunch of Korean characters. Let go of the buttons as soon as you see it. Then my LG USB serial port showed up and I was able to flash. It seems that getting into download mode changes with each major sw upgrade...

Just one question...
Why are you guys trying omapboot download mode if you just want to flash ICS?
If you want to flash ICS you dont need omapboot just put phone in normal download mode...and for normal download mode you dont need the omap driver :/
Don't do unecessesary steps you are just making your life harder...omapboot download mode is only for bricked phones that dont turn on at all and have no normal download mode...

Mine would boot but couldn't flash correct baseband until I used the guide and the drivers as it wouldn't go into download mode so to me it was necessary IMO may not of been but I didn't know another way and it worked
Sent from my LG-P925 using xda app-developers app

Yeah wayno i am not saying you didnt have a problem but i will tell you from my experience so far that people asked me for teamviewer sessions because they "tried everything" and didn't work but at the first 10 sessions i said ok some where missing drivers others didn't know the key combination etc etc..
When i reached the 20 teamviewer sessions it was still the same thing..old drivers, not following procedure etc etc..
At 30 teamviewer sessions the same...
40, 50 until i decided not to have any other teamviewer session because everybody said they tried everything but didnt work but "magically" with teamviewer everything worked (apart from 1 p920 that really had a hardware problem, i fixed that too with a different method).
The bad thing is that people posted in every thread in order to find a solution and actually the solution was to follow the guide (not the omapboot unbrick guide :/, the lg flashtool guide) and that made it difficult for the rest of the users, i had lg flashtool questions in rom thread, in bricks thread, in basebands thread but the right thread to ask actually was the LG Flashtool thread and if they asked there it would be easier for them to get an answer and also for the rest of the users to read..
I know this ICS is a great thing and everybody wants to try it from novice to experienced users but if we don't get organised it just gets out of hand :/ and saying the same thing in every thread is just annoying.
I know the lg flashtool guide is old but i cant make a guide for everything and reading a few pages especially in the end i have also posted there some info.

I totally understand your frustration and it did make it hard my problem was I overlooked a few things but when I got pointed in the right direction a few times lol I eventually found my way. And yes the clutter did make it hard for those who were following the rules and needed help couldn't get it cause there was just too much for the few people who understand it all. But now I got it and am trying to talk my wife into letting me do her phone lol after I failed. BTW awesome job bringing this old thing back to the forums pure genius.
Sent from my LG-P925 using xda app-developers app

Thank You.

[Q] restoring bricked oneplus one problem

First of all, when I'm in the wrong thread, sorry!
So here I go. I guess i bricked my 1+1. Doesn't turn on, only black screen and if i push a button, it vibrates. Looked up for solutions, and found one here somewhere. It's with the recoverytool or with ColorOS.
So I tried to follow the steps. Everything works fine, in Device Manger, the phone is now recognised as Qualcom HS_USB QDloader 9008 (COM3). Til here no problems at all. Then I installed the set-up file, compatibilitymode, run as admin.
I open the recoverytool, and i scan for the device. It should appear as COM. But nothing shows up. It's weird because Windows recognises the device.
What am I doing wrong? What can help?
Thanks

gl411 said:
First of all, when I'm in the wrong thread, sorry!
So here I go. I guess i bricked my 1+1. Doesn't turn on, only black screen and if i push a button, it vibrates. Looked up for solutions, and found one here somewhere. It's with the recoverytool or with ColorOS.
So I tried to follow the steps. Everything works fine, in Device Manger, the phone is now recognised as Qualcom HS_USB QDloader 9008 (COM3). Til here no problems at all. Then I installed the set-up file, compatibilitymode, run as admin.
I open the recoverytool, and i scan for the device. It should appear as COM. But nothing shows up. It's weird because Windows recognises the device.
What am I doing wrong? What can help?
Thanks
Click to expand...
Click to collapse
Have you installed the Qualcomm driver?Its very tricky,Windows wont allow to install it easily.

Yes I did, I was able to switch to non signed in Win8 via F7 in a menu. Thats why it changed from BULK to qualcomm qd9008 on a COM port. Or cant I be sure its done propermy when the name changed?

gl411 said:
Yes I did, I was able to switch to non signed in Win8 via F7 in a menu. Thats why it changed from BULK to qualcomm qd9008 on a COM port. Or cant I be sure its done propermy when the name changed?
Click to expand...
Click to collapse
It should be the driver problem,no other choice.

maskelisuvari said:
It should be the driver problem,no other choice.
Click to expand...
Click to collapse
The easiest way for unbricking oneplus (yes, I tried it): http://forum.xda-developers.com/showpost.php?p=55024864&postcount=136
ColourOS firmware has all needed files for proper flashnig, including right tool for doing that.
Only thing that didnt work on my Win 8.1 x64 was drivers mentioned in post above.
I had to use this QHSUSB_DLOAD drivers from member DallasCZ (that I used for unbricking ZTE v9180). Only with that drivers my Windows recognized bricked phone and Flash tool could find and flash it.
Flash tool in only on chinese, that is a bit problem, but instructions given in post I linked are more/less usefull.
This is a link to DallasCZ shared folder with qhsusb drivers:
https://drive.google.com/folderview...&usp=sharing&tid=0B1T7tp6tJ_3kQkZSWjNsazJZbGc

If you are sure the driver is okay,plug in the usb cable and out and in,until you see the green line on the tool.Also you can follow the guide as in below link:
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
The same thing but this time you can flash CM11s instead of ColorOs.Also there is a video.Pls check it.

Ok so I did the process over and over again, the sixth computer did it right! I was back on ColorOS and now back to CM11S.
This thread can be closed, thanks for the help!

No problem,glad to hear you solved the problem

Bricked lg g stylo metroPCS NEED HELP

I need help with my lg g stylo. I was using one click root Kingo root and when it was 66% done it was rebooting my phone into firmware download and my computer running Windows 10 froze to where I had to hard reset it, and my phone froze on firmware update. Now my phone is stuck in a bootloop on the LG life's good screen, I've tried hard resetting it ( with the volume down and power button combo) the Android guy pops up for one millisecond and disappears going back to the LG screen not doing anything the only other the only other thing I can do is go into downloading mode( while connected to a computer hold the volume button up) but when I do that my computer does not recognize my phone saying code 10 device cannot start up I have called LG they refused to help me get into recovery mode I have called Google Android support they don't know how to help I have also called windows trying to see if it was my computer's fault and they decided it wasn't I am kind of out of options I'm hoping someone knows how to help me I'll appreciate any help I can get thank you.

You need to download a MetroPCS KDZ and use rhe LG Flash Tool to flash the KDZ and bring your phone back to life.

I've tried that already I keep getting a Windows error code 10 device cannot power on I contacted windows and they said that is not my computer that is my device I have reinstalled my driver's serval times

Blairmathew071213 said:
I've tried that already I keep getting a Windows error code 10 device cannot power on I contacted windows and they said that is not my computer that is my device I have reinstalled my driver's serval times
Click to expand...
Click to collapse
To get into download mode you need make sure phone is 100% powered off then hold the volume up button and then plug in the usb cable. Dont release the power up button until the phone is fully in download mode not just the first screen. Also search for your phones adb drivers and install them to your pc not just the usb drivers. Make sure to uninstall any existing drivers first.

Thediesel1972 said:
To get into download mode you need make sure phone is 100% powered off then hold the volume up button and then plug in the usb cable. Dont release the power up button until the phone is fully in download mode not just the first screen. Also search for your phones adb drivers and install them to your pc not just the usb drivers. Make sure to uninstall any existing drivers first.
Click to expand...
Click to collapse
ok thank you i havent installed adb drivers yet ill let you know what happens

Blairmathew071213 said:
ok thank you i havent installed adb drivers yet ill let you know what happens
Click to expand...
Click to collapse
still not connecting to my pc uninstalled my usb drivers and reinstalled them and the adb drivers for my device my pc says " this device cannot start (code: 10)"

Blairmathew071213 said:
still not connecting to my pc uninstalled my usb drivers and reinstalled them and the adb drivers for my device my pc says " this device cannot start (code: 10)"
Click to expand...
Click to collapse
Did you try another pc with the adb drivers installed to see if you get the same error? If it connects on a different pc try this on the problem pc.
Open task manager
Click on the Hardware tab
Click the Device Manager button.
Expand Universal Serial Bus controllers section.
Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
Restart the computer, and allow the computer to reinstall the USB controllers.
Plug in the your phone in download mode and test to to see if the issue is resolved.
You can also download Ccleaner and fix any registry errors for free. I've used it for years and it works really well.
Still no joy. Try a system restore on your pc sounds like the device management could be screwed up.
All kinds of funky sh*t can happens when a pc crashes. You said you have windows 10 as a last resort you can do a system refresh which reinstalls the os but keeps your files.

Thediesel1972 said:
Try a system restore on your pc sounds like the device management is screwed up. Also you can download Ccleaner and fix any registry errors for free. I've used it for years and it works really well. All kinds of funky sh*t can happen when a pc crashes. You said you have windows 10 as a last resort you can do a system refresh which reinstalls the os but keeps your files. Id try ccleaner first.
Did you try another pc to see if you get the same error?
Click to expand...
Click to collapse
yes ive plugged it into a pc running win 7 and i already did a pc reset i did the option to clean everything im thinking about formatting my hard drive and do a clean install of windows ill look into the ccleaner and see if that helps ill let you know what happens thank you

Blairmathew071213 said:
yes ive plugged it into a pc running win 7 and i already did a pc reset i did the option to clean everything im thinking about formatting my hard drive and do a clean install of windows ill look into the ccleaner and see if that helps ill let you know what happens thank you
Click to expand...
Click to collapse
Did you check my edited post?

Thediesel1972 said:
Did you check my edited post?
Click to expand...
Click to collapse
yes i did and still nothing but i think i found a way through android studio

Android SDK manager cannot find my device either I tried looking it up to my port and USB locator

Everything you need can be found here in the LG G Stylo forums and if it's not here a google search will help.
You need...
MetroPCS 5.1.1 KDZ
LG drivers
LG Flash Tool
Download the KDZ. Install the LG drivers while you wait for the 1.2GB KDZ to be downloaded. Download the LG Flash Tool and when the KDZ has completed downloading run it as an administrator. Settings in Flash Tool should be fine. Point to the KDZ and begin the flash. Normal or CSE. Normal does not wipe data, CSE wipes all user data. You'll be prompted with something about your internet connection. Do not close this, the tool should be flashing the KDZ. Wait for the phone to be rebooted after flashing. Profit.

Mattix724 said:
Everything you need can be found here in the LG G Stylo forums and if it's not here a google search will help.
You need...
MetroPCS 5.1.1 KDZ
LG drivers
LG Flash Tool
Download the KDZ. Install the LG drivers while you wait for the 1.2GB KDZ to be downloaded. Download the LG Flash Tool and when the KDZ has completed downloading run it as an administrator. Settings in Flash Tool should be fine. Point to the KDZ and begin the flash. Normal or CSE. Normal does not wipe data, CSE wipes all user data. You'll be prompted with something about your internet connection. Do not close this, the tool should be flashing the KDZ. Wait for the phone to be rebooted after flashing. Profit.
Click to expand...
Click to collapse
Thats not his problem its his pc read the prior posts

I had the same problem once the device connected as download mode.
The kdz tool doesn't detected and crashed all the times. But miracle happens I kept playing(open&close)the kdz tool app. Somehow it detected and flash the kdz.

Android Studio was a bust still unable to find my device even with the code to direct information to the only USB device connected

Shimster said:
I had the same problem once the device connected as download mode.
The kdz tool doesn't detected and crashed all the times. But miracle happens I kept playing(open&close)the kdz tool app. Somehow it detected and flash the kdz.
Click to expand...
Click to collapse
I'll try that and see if it works thank you

Did you ever try a different pc and if so was it detected by windows

Thediesel1972 said:
Did you ever try a different pc and if so was it detected by windows
Click to expand...
Click to collapse
Yes I've tried and computer running windows 7. Adb cannot find my device.

Blairmathew071213 said:
Yes I've tried and computer running windows 7. Adb cannot find my device.
Click to expand...
Click to collapse
I was under the impression that the phone was entering dl mode but just not getting recognized by the pc. Either or you should bring it to a corporate store and tell them it boot looped while updating and play dumb. They should replace it since its under warranty. Or call lg and do it that way although its about a ten day wait.

Thediesel1972 said:
I was under the impression that the phone was entering dl mode but just not getting recognized by the pc. Either or you should bring it to a corporate store and tell them it boot looped while updating and play dumb. They should replace it since its under warranty. Or call lg and do it that way although its about a ten day wait.
Click to expand...
Click to collapse
My phone does enter download mode just can't do anything from there. ADB can't find device. I even found the port I'm in and tried to force into recovery but still no device connected.

Hard Brick Oneplus One Windows 8.1 x64bit

I have problem with my OPO.
I try to install TWRP 2.8.6.0 but after that my phone doesn't boot. Nothing work. I hold power button for 2 minutes and nothing.
I do everything like in this guide but it doesn't work. http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
I connect my bricked phone and Windows see it "other devices- unknown device"
I done cmd commands, update driver, select Qualcomm 2012/widnows8/qcmdm/ QDLoader 9008 and after that I have error " Windows found driver software for your device but encountered an error while attempting to install it. This device cennot start(Code 10)"
And it is my problem. I stopped at point 2b in the Guide becouse I can't install drivers.
here is video of that. https://drive.google.com/open?id=0B9...G8tbnNES2VZWG8
Please fast help, becouse I really need this phone next weekend.

Please, can someone help me?

Rebeluch said:
Please, can someone help me?
Click to expand...
Click to collapse
when i bricked my oneplus one, i had similar issues. I had to reinstall windows in order to make it work.

hellcat50 said:
when i bricked my oneplus one, i had similar issues. I had to reinstall windows in order to make it work.
Click to expand...
Click to collapse
Do you pluged phone into USB port and computer can't see it?
Do you reinstalled system to Windows XP?

Rebeluch said:
Do you pluged phone into USB port and computer can't see it?
Do you reinstalled system to Windows XP?
Click to expand...
Click to collapse
I used windows 8.1
reinstalled windows 8.1 on a new partition
It's now a long time ago so i can't quite remember what problem exactly i had, but I know that it didn't worked and i reinstalled windows and it worked.
Actually one month after I bought my oneplus one i bricked it

have u tried disable windows driver signature enforcement? becoz after windows 7, driver that doesnt have digital signature are not installed unless u disable the enforcement

MrxSiN said:
have u tried disable windows driver signature enforcement? becoz after windows 7, driver that doesnt have digital signature are not installed unless u disable the enforcement
Click to expand...
Click to collapse
Yes, I do this in Advanced restart options and click F7. And windows still can't see phone.

Hard bricked my OPO... Qualcomm driver question

Bricked my OPO somehow flashing cosmic OS. I get the load screen and thats it. no recovery and no fastboot. I've found a million tutorials on how to fix a hard brick, but all of them show the opo in device manager as qualcomm. I've downloaded some drivers but not sure what to do from here to get that to read qualcomm so i can start the unbrick process. any help or suggestions?

Jjleininger said:
Bricked my OPO somehow flashing cosmic OS. I get the load screen and thats it. no recovery and no fastboot. I've found a million tutorials on how to fix a hard brick, but all of them show the opo in device manager as qualcomm. I've downloaded some drivers but not sure what to do from here to get that to read qualcomm so i can start the unbrick process. any help or suggestions?
Click to expand...
Click to collapse
Forget all the other guides...
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Just use this one and the drivers included.
It will easily restore back to cm11s(stock KK),after that you can flash MM(Cos13.1x) if you want through fastboot.
The key-point is you need to find one of Xp systems around you and then use that because win8/10 somehow makes driver signature a headache and takes more time to set-up.

Mr.Ak said:
Forget all the other guides...
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Just use this one and the drivers included.
It will easily restore back to cm11s(stock KK),after that you can flash MM(Cos13.1x) if you want through fastboot.
The key-point is you need to find one of Xp systems around you and then use that because win8/10 somehow makes driver signature a headache and takes more time to set-up.
Click to expand...
Click to collapse
I'll check this out this evening. I'm playing hell trying to get drivers working. All the write ups I see show the opo saying qualusb in device manager upon connection and no matter what I do I can't get mine to. I've got an old laptop running win7 maybe I'll give that a shot. This would be done and over if it showed as qualusb in "ports" instead of adb interface in "usb".
Thanks for the info.

Jjleininger said:
I'll check this out this evening. I'm playing hell trying to get drivers working. All the write ups I see show the opo saying qualusb in device manager upon connection and no matter what I do I can't get mine to. I've got an old laptop running win7 maybe I'll give that a shot. This would be done and over if it showed as qualusb in "ports" instead of adb interface in "usb".
Thanks for the info.
Click to expand...
Click to collapse
Remove all other drivers.
Again,XP is advisable,I don't think it takes long to dual boot XP alongside.

Downgraded to Windows 7, now the phone shows up as Qualcomm, but still can't get the program to recognize. Bootable xp drive failed, will try disc when I get home.

Jjleininger said:
Downgraded to Windows 7, now the phone shows up as Qualcomm, but still can't get the program to recognize. Bootable xp drive failed, will try disc when I get home.
Click to expand...
Click to collapse
Sorry for late reply.It should be "Qhs_bulk" or "qualcomm_diagnostics9006" not just "Qualcomm".
Just try refreshing through Ebus button and make sure you're using original 1+ cable and try changing ports likewise.
I'd still say try with XP,use rufus to make a bootable usb and if you're good to go.After you setup the drivers(from thread link I gave you or from the zip itself), make sure you run the program as an administrator.

Mr.Ak said:
Sorry for late reply.It should be "Qhs_bulk" or "qualcomm_diagnostics9006" not just "Qualcomm".
Just try refreshing through Ebus button and make sure you're using original 1+ cable and try changing ports likewise.
I'd still say try with XP,use rufus to make a bootable usb and if you're good to go.After you setup the drivers(from thread link I gave you or from the zip itself), make sure you run the program as an administrator.
Click to expand...
Click to collapse
I've got it so it says qualcomm hs-usb qdloader 9008. I'll continue refreshing and swapping ports. I've used Rufus and four whatever reason it's giving me bsod when booting via USB. I'll give a disc a try.

Jjleininger said:
I've got it so it says qualcomm hs-usb qdloader 9008. I'll continue refreshing and swapping ports. I've used Rufus and four whatever reason it's giving me bsod when booting via USB. I'll give a disc a try.
Click to expand...
Click to collapse
Your motherboard supports usb booting?

Mr.Ak said:
Your motherboard supports usb booting?
Click to expand...
Click to collapse
Yessir, just went from windows 10 to 7 via USB boot.

Jjleininger said:
Yessir, just went from windows 10 to 7 via USB boot.
Click to expand...
Click to collapse
You can use other software than rufus for XP but that'll make the process too slow,atleast while installing XP.
But a CD always does the work perfectly for XP!

Mr.Ak said:
You can use other software than rufus for XP but that'll make the process too slow,atleast while installing XP.
But a CD always does the work perfectly for XP!
Click to expand...
Click to collapse
I tried a straight jump from win 10 to xp with a disc and the installation option was grayed out, maybe with 7 it'll give me that option back. I'll burn a new one this evening and give it a go.

Jjleininger said:
I tried a straight jump from win 10 to xp with a disc and the installation option was grayed out, maybe with 7 it'll give me that option back. I'll burn a new one this evening and give it a go.
Click to expand...
Click to collapse
Dual boot?