It never fails that my my phone is an entertainment device for my 4 year old at times, I am thinking of the casemate tough case - Tough Case
Although I would prefer the barely there or similar thin case. How durable is the phone in drops? I am coming from the super fragile iphone 4, so I may be overly concerned?
I would go with the Ballistic case that ATT sells in the ATT Wireless stores. Very durable but easy enough for you to take it out and put it back in for desk or care docks.
Otterbox is making a case for this guy, looks pretty sharp and doesn't seem too bulky, worth consideration. I have 3 kids myself so having a durable case is key. Here is the link
http://www.otterbox.com/Samsung-Infuse-4G-Defender-Series-Case/SAM2-INFUS,default,pd.html?dwvar_SAM2-INFUS_color=20&start=1&cgid=samsung-infuse-4g-cases
I am a huge Case Mate Tough case fan. I have had them on my last 4 phones. It will protect from drops. I like that the rubber insert isnt really sticky and for what it does it is slim.
If you're looking for a thinner case, look at the Case Mate Pop...it's fairly thin, and has soft rubber inside with a hard plastic outside...all one piece. Should provide the shock protection you're looking for while still being fairly thin. It's similar to Speck Candyshell cases if you're familiar with those.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Which case would you put your trust into more?
I currently have the Spigen which I could take back for $15, and I have an Otterbox on the way that I spent $5 through coupons on which I can sell for $25.
But I don't care about money, I only care about which one you think will be best for my phone.
This is the second phone I've bought an Otterbox Commuter for. I love the Commuter's styling and protection and wouldn't buy anything else.
Commuter.i had to the hybrid but the commuter is way better
I have the neo hybrid cc and I love it. I love the fact that it's clear so you can show off the beauty of the phone. It's is very slim and has quite a bit of rubber material around the entire edge which seems to provide total coverage. I haven't dropped it yet, but I feel confident that I'll be good to go if I did. I also advise getting a tempered glass screen protector with this case. It will fit just inside the edges, leaving only a tiny gap around the edge. Hope this helps.
I have the spigen neo hybrid. Dropped the phone twice already? and
Still as it was when it came out of the box..?
The Otterbox Commuter has my vote.
I have the Neo Hybrid CC case and I love it. It adds very little bulk and yet the phone feels secure. I haven't dropped it yet *knock on wood* but it feels like it (the phone) would be OK if I did.
Personal opinion on the look of the Commuter case (and Otterbox cases in general) … This is a stunning phone. Probably the one of if not the nicest Android devices ever. Why would you put it in such a bulky, unattractive case? I mean, unless you work in construction, or have a history of dropping phones like crazy.
Otterbox Commuter
The otterbox commuter is just a tougher case.
I've trusted my phones to otterbox for 3 years now. Never had a broken phone through multiple drops including high speed fumbles that end up skittering across a concrete floor. Even stepped on my phone once with no damage.
Speck CandyShell
Sorry for not answering with Otterbox or Spigen but please hear me out.
I purchased an S4 on launch day 2 years ago and immediately had it in a Spigen Neo Hybrid. I used the Neo Hybrid for several months then switched to an Otterbox commuter which I used until getting the S6.
Between the S4 Neo Hybrid and Otterbox Commuter I felt like the Neo Hybrid looked better but the Otterbox Commuter was more durable.
I purchased a Spigen Neo Hybrid CC for my S6 when it was on Slickdeals discount code for $6.00
I used it for a few days and tried to like it but it just didn't compare to the Speck CandyShell case that I got for my wife's IPhone 6. The Speck CandyShell is a one part case.
I picked up a Speck CandyShell white and black and it will likely be the case I use for the next 2 years. When you put it on the phone it seriously makes the case feel like part of the phone.
The quality is great and it feels like it will protect the phone better than the Neo Hybrid CC. My brother has the base version of the Spigen Neo Hybrid on his S6 and the first thing he said when he felt my case was that he should have gotten it instead.
One downside to the case is that the power button and volume buttons are in the rubberized portion of the case exterior and do not provide the crisp feel of the metalized buttons on the Neo Hybrid case.
Another downside is that the back plastic shows small scratches easily. They do offer a grip version which has rubberized grip on the back which would keep the plastic from contacting the surface when setting the phone down.
Before selecting a case please go to Best Buy and test out the Speck CandyShell. You should be able to pull the case out of the box and put it on your phone to test.
So far I really like my Neo Hybrid. I had an Otterbox Commuter on my M8 and it was ok
Try the uag just got it. I have the commuter not even close. Protective and thin
Sent from my SAMSUNG-SM-G920A using XDA Free mobile app
Commuter.
Any Body know what the best case is for protection?
Sent from my SCH-I545 using XDA Free mobile app
Generic TPU cases are usually good.
Case
I think Urban Army Cases are very good. They are very solid!
A friend of mine use an AVIZAR waterproof case and a BEYOND CELL TRI SHIELD HYBRID (not on the same time )
He is happy with the two.
i think it depends on how you use your phone. i usually prefer the ultrathin tpu case but now i'm using Seidio Obex Waterproof Case and it worked as i expected before
IMHO the best case for s4 is go naked and not using any case
Otter box has a new line that I am very impressed with. The symmetry line is like the the commuter in that it is silicone and hard plastic. But it's one piece making it much less bulky. They come in plenty of different colors and has a great raised edge to protect the screen from face down dropping. Which I have done many times. And my second place choice is made by a tactical firearm accessories company, Magpul field case. Up until recently they only made cases for macntrash. It's a little harder than the typical tpa case but flexible enough for installation. And it also has a raised edge and comes in a variety of colors. Looks like one of their p-mags
I use this case for the past two years and i didnt had a single problem
http://www.amazon.co.uk/Tech21-Impact-Mesh-Samsung-Galaxy-Clear/dp/B00C70H8WY
Good waterproof case?
I use case Carbon fiber, i feel more durable.
Use the iface mall case(if you drop your phone like a lot)otherwise use what other suggest ??
Sent from my GT-I9505 using Tapatalk
All the way, Urban Armor Gear with Tempered Glass. Using this combination from quite some time and in the mean time have dropped phone four to five times and no problem arose.
I had a Spigen Slim Armor View Case for a little over a year and I loved it, but the plastic around the volume buttons broke from removing it to change batteries too much.
http://www.amazon.com/gp/product/B00BW6GHV2?psc=1&redirect=true&ref_=oh_aui_search_detailpage
This model wasn't available in the color I wanted through Amazon Prime so I ordered the Spigen Neo Hybrid Series.
I live it so far, it's smaller and slimmer than the Silm Armor, it was metal around the edges instead of rubber so the first time the case hits the grounds it's going to scratch, which I don't like. The buttons are a little easier to press with the Neo Hybrid but the opening for the charger cable is a little small, I have to shave down some of the micro USB cables to fit.
http://www.amazon.com/gp/product/B00BYJXGP2?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00
Some of the cases mentioned above provide a lot more protection but they are way too big for me.
I have a Cellular Line cover. I bought it almost 2 years ago and my phone is still in perfect conditions.
Hey guys. I just decided to try Nexus 6P. Looking for some great cases to protect it! But also I don't wanna spoil the original look of it since the design's so unique and beautiful!Just got two clear cases for my former Nexus 6 from AMZ and looks wonderful, yet the clear case get darken yellowed after few weeks using, so just share your N6P case experience here and enjoy!
Long response incoming:
I initially bought a official microfibre Adopted case (in carbon) from Google along with my N6P (aluminium). I paid full price for it, but I thought it was worth the premium for an official case and the design was cool and unique. Massively underwhelmed when I received it, because it's nothing more than a generic TPU case with a thin "sticker" of microfibre on the back, which I sensed would be prone to staining and, over time, peeling. The fit was also really tight and button presses weren't that responsive. I decided in the end that the Nexus branding wasn't worth the premium, so I returned it.
I then ordered a charcoal Diztronic case. I've had good experiences with Diztronic in the past, having used their case on my Galaxy Nexus as a daily driver. It was cheaper than the Spigen Rugged Armor and I appreciated the minimalist aesthetic, not being a fan of the faux carbon fibre pattern on the Spigen. The fit and finish was great, and the buttons were clicky and responsive. My only minor niggle was the cutout for the camera sensor wasn't completely accurate, as it cut off part of the circle surrounding the sensor (100% an aesthetic oversight with no impact on function).
I then bought a Speck Candyshell Grip (in white) during the Black Friday sale, when it was 50% off. Definitely my favourite case of the three I've tested so far. It provides the most protection (being a dual-layer silicone and polycarbonate hybrid), looks striking, and, as the name implies, provides a ton of grip.
I've had a Speck Candyshell on my iPod touch and over 4 years later, it's still kept my iPod in perfect condition. The case itself is scratched up and turned a bit off-white, but I haven't exactly been gentle with it (having taken it traveling and camping) so I'm confident in its protective capabilities.
I'll likely be rocking the Speck case as my daily driver for the time being, and I'll only swap back to the Diztronic when I want a more toned-down look and slimmer profile (maybe if I'm at a fancy event wearing slacks).
Finally, I also pre-ordered a white Crash Guard + Project S from Evolutive Labs when they offered 25% off the first 50 pre-orders. IMO this would be the solution to preserving the Nexus's original design and aesthetics, while still providing a lot of protection (if the demo videos are any indication). I have no idea what Project S is, though (hopefully some kind of transparent skin, though they said it wasn't going to be made of the same material as the Rhino Shield).
I have a tempered glass screen protector from intelliARMOR protecting the front (second generation/first revision, the model prior to production of the two distinct "case-friendly" and "edge to edge" versions). It's been fine with both the Diztronic and Speck cases, though I'm curious as to whether the edge-to-edge versions might also be compatible with the Speck and Crash Guard, as there's just 1 mm between the edges of the cases and screen protector, where I find dust and grease can get trapped in between.
If you're looking for clear cases, there're Spigen's Ultra Hybrid and Neo Hybrid EX cases. The Ultra Hybrid is a single-layer case with a clear polycarbonate back framed by TPU along the edges. I wouldn't recommend it personally because I've heard that clear TPU will stain over time (as likely what happened to your original case), and the visor is completely exposed and thus prone to scratches.
The Neo Hybrid EX consists of 2 pieces: a clear TPU shell and a coloured polycarbonate bumper (essentially, the reverse of the Ultra Hybrid). It looks to be the best clear case I've seen in terms of protection (as the visor is actually covered), but I don't know how the clear TPU will fare over time, whether it will also be prone to staining. I'd wait on reviews for this case before ordering, and for it to be listed on Spigen's Amazon store, which will likely be cheaper than buying it off their main website or eBay store.
To be honest it's the first device that I don't have a case for it although I have a tampered glass and a pouch. But I'm waiting for some skins from dbrand and a wooden skin from toastmade.
Tapatalked with my Nexus 6P
I got the carbon cloth backed Nexus 6P case originally and I really like the look and feel of it, but it's not the most protective. The only issue I've had with it is taking screenshots (the case presses buttons you don't mean to) and it wouldn't work with a tempered glass screen protector (it peels it up).
On the black Friday I got the Speck CandyShell in black/slate and I'm digging it. It's more protective and it makes the button presses a little harder, which I like. I would think it'd work with a glass screen protector as the bezels don't intrude onto the glass very much.
I use a Supcase Unicorn Beetle Hybrid as my standard case. I usually slide it in my pants or jacket pocket. I do wish there was a belt clip for the Beetle Hybrid, but to get a belt clip case combo you typically are into something much thicker and substantial that is, for me, unnecessary. When I'm wearing a suit, I use it bare and carry it in a Story Leather belt clip holster made for the iPhone 6s Plus. The phone has a Skinomi Tech Glass protector on it.
My experience mirrors LuckyDragan a little bit.
My first case was the microfiber case from the Google store. While it looked nice and the in hand feel was decent, I felt it cost way too much for what it was. I ended up returning it because when I pressed the edge of the case by the buttons it would change the volume. Not cool for a $35 case.
Next case is the reg. Adopted case. It's not bad. I really like the textured sides. It's also fairly narrow. Thing is, I paid $10 for it, at the reg. price of $20, I'm not sure if it's worth it. By the pics I've seen, I think it looks better than the Diztronic, especially the fingerprint cut out.
3rd case is the Spigen Rugged Armor. Except for the camera cut out (I don't like how it doesn't leave room for the blueish oval), I think it looks the best of all the cases I've tried so far. My nags are that It's all little wide and slippery. At $13.00?, it's a good buy.
4th case is the Speck Grip. My favorite so far. It's not as thin as the other cases but not bulky. The grip is awesome, no problem using the phone with one hand. At first glance, I didn't think it was the best looking case, but it's starting to grow on me. The protection and how it makes the phone so much easier to handle makes it a winner. @ $20 I paid during the Google store's sale, I think it's worth it. @ the reg. price of $40, idk.
If haven't yet, check out Pilz review thread, so much good info.
White Speck case as my daily driver.
I have tried the Diztronic one, while it does provide protection, did not like how loose the edges felt, definitely not as snug and stiff as my Diztronic Ultra that is on my GS6. It easily bent out edges for my taste, and thought of getting some debris that could scratch up the phone was bugging me somewhat. If you need a very minimalist, fingerprint resistant, and decent lip for screen protection, that is the case to have.
Also have the Supcase Unicorn Hybrid Ultra. great case, snug and firmer edges than the Diztronic one, but damn, is that case slippery. I have a habit of placing the phone on my car seat, and that thing just slides around like a hockey puck on ice when placed on its back. Placing it face down did help... still preferred it over the Diztronic.
But snagged the White Speck Candy Shell Grip case at 50% off, love it. Excellent grip, very tight and solid felling edges, does not slide when placed on a my car seat. Wished they offered a matt finish white version of this, since I am not a fan of shiny cases, but the black rubber lines offset it enough to be likable for me. Sporting the Orzly TGSP,with that case there is a minimal space between the glass and the edges of the case, nearly perfect sealed fit. Hoping the intelliglass ones are a bit more of an coverage so that it could have a near gapless glass to case seal, still waiting on receiving mine...
Currently have the Tudia case which is brill, but also got the Spigen rugged case coming.
Official microfiber case in carbon. No screenshot issues or button issues in general. I love the soft fabric feel. Feels more "welcoming" than the cold, hard plastic/TPU of other cases I've used. Regarding durability, I'm a little concerned, but only time will tell how the microfiber will hold up.
Smoked Ringke fusion is my case of choice, at least for now. I also have the Orzly flexicase and Spigen rugged armor. Don't really care for either of those.
Anyone want to trade a case for the spigen rugged armor? mint condition and hasn't been used other than trying it on once.
PuffinNugz said:
Smoked Ringke fusion is my case of choice, at least for now.
Click to expand...
Click to collapse
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
I use spigen rugged armor, it's a good case that offers high protection to your phone..
i intend to order the verus high pro shield case though, just want to wait for some time until they fully supply the updated case.. the first batches had a defect about the charging port..
InfestedAdam said:
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
Click to expand...
Click to collapse
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
PuffinNugz said:
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
Click to expand...
Click to collapse
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
InfestedAdam said:
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
Click to expand...
Click to collapse
Yeah, not sure about amazon, but I bought mine from that ebay link. Pretty sure they are the actual sellers.
The Spigen rugged arrived today and it is SOOOO much nicer than the Tudia one. Better fit and feels nicer and more secure.
Sent from my Nexus 6P using Tapatalk
I've had a few cases so far.
SR Tech - Typical TPU case. Decent protection. Cutouts were slightly off. Total fingerprint/oil magnet. Got real slippery after a week or so of use and required a wipe down. Did not interfere with my Pleson TGSP.
Spigen Rugged Armor - Soft touch finish felt really good in hand. Very good protection at the sacrifice of some added bulk. Cutouts were precise and buttons had a nice tactile feel. Soft touch got some smudges on it occasionally but not nearly as bad as the SR case. Did not interfere with my Pleson TGSP but it was really close.
Spigen Thin Fit - Very interesting finish on this case. Kinda felt like the back of the Nexus 6. Fingerprints weren't really a problem but oil/smudging was. Case snapped on snugly and provided good protection for the covered areas. Top and bottom of the phone were exposed. Did not interfere with my Pleson TGSP.
Nillkin Nature - This is my daily driver. Pretty much the same as the SR Tech, only about half the thickness. Cutouts are more precise and there is a cover for the Type C port, which I really like. This is literally the thinnest case I've ever used and it really helps make the already large 6P more manageable in the hand. I wish it came in a matte finish so oil/fingerprints weren't so much of an issue, but other than that I'm happy.
Adopted for now until bumpers start arriving and be reviewed.
Ringke smoke and Google Microfiber. Like both and switch weekely
Sent from my Nexus 6P using Tapatalk
I switch from the official google carbon case and spigen ultra hybrid. They are great cases but the buttons on both aren't the best. I also have speck case but I use it for when I go to the gym. Diztronic case is nice but phone feels loose inside and verus case.. Its whatever.
Sent from my Nexus 6 using Tapatalk
I have the clear with stand, leather and the PVC case. All three aren't great in my view.
The clear with stand has scratched far too easily, the leather scores too easily and the PVC is a lint magnet, which makes it unpleasant to use. Anyone else have different experiences?
I got the elago hybrid, and Spigen liquid air too. Both considerably less expensive. Zero issues.
ekerbuddyeker said:
I have the clear with stand, leather and the PVC case. All three aren't great in my view.
The clear with stand has scratched far too easily, the leather scores too easily and the PVC is a lint magnet, which makes it unpleasant to use. Anyone else have different experiences?
I got the elago hybrid, and Spigen liquid air too. Both considerably less expensive. Zero issues.
Click to expand...
Click to collapse
I have the OEM leather case. Looks nice, but, I used it for about 5 minutes, it makes an already large phone a real handful.
I'm using an ultra thin carbon fiber case:
Super Slim Case for Samsung Galaxy S22 Ultra 6.8", Real Aramid Fiber Protective Cover Skin/Wireless Charging Friendly https://www.amazon.com/dp/B09PRV3Q3...t_i_7M7WCKXKNVSTHFRN2DJQ?_encoding=UTF8&psc=1
While it doesn't provide as much drop protection as most cases, it provides good protection from everyday wear & tear/scratching.
Overpriced and quality-wise not so good I would say.
i just go on aliexpress and buy multiple cases at <$5. all the ones on amazon are just marked up cases that ali express sells anyway
I've fallen in love with the strap case.
I use the original leather case after i tried the original sillicon case. The sillicon was to sticky hard to get it in the pocket and out
I love the original leather case because it has single holes for every camera it looks much cleaner that way also the feel of the leather. I dont worry about scratchmarks they tend to go away after a few days because its leather you have to use it for a while to get it resistant with your hand oils and fats till it looks good you can also balm it with leather balm
I understand people who dont like the nature of leather but you have to know it will change its appearance with time and you have to care for it
When i know it will be a dirty day, gardening working on the car doing craftswork i just slip on the sillikon case
I have the leather case now 3 weeks and it looks greater then as it was new
Been using their silicone case since the Note 9. Have the one with strap for my Ultra and can't go to any other case. Quality is superb and the grip is very nice.
I bought the Samsung Rugged case when I got my Note9. I used it until I traded-in the Note9 for the S22 Ultra. I never had any problems with it and my Note9 looks brand new. Unfortunately, the new cases from Samsung are poor quality by comparison, so I went with a different brand.
I bought both Smart View Flip and Samsung's silicone cases for my S22 Ultra, like them both! Very good. I currently use the smart view flip case and thought I would get annoyed opening and closing the front cover but ultimately, I ended up liking it more than the open covers.
I just wish they used the nice silicon material like on their silicon case version which feels much nicer than the material used on the smart flip view case.