Database Info

Captuvate help

I brought this phone last year and it turns to show me this picture
RST_STAT =0x1
PWIC_IRQ1 =0x0
PWIC_IRQ2 =0x0
PWIC_IRQ3 =0x0
PWIC_IRQ4 =0x0
PWIC_STATUS1=0x00
PWIC_STATUS2=0x0
What should I do?
Can I repair it?
Please help.

Try a Jig to get it in Download mode and then Odin/Heimdall a Stock Rom.
If u r on a pc, check out my signature below for some links...
Sent by XDA Premium App

I tried and no result
what I do wrong?

Looks like kernel panic. If your PC doesn't recognize your phone prior to using Odin to get back to stock, take the battery out for a few minutes and try again or use heimdall
Sent from my SGH-I897 using XDA

clipocel said:
I tried and no result
what I do wrong?
Click to expand...
Click to collapse
What specific result did u get...?
Sent by XDA Premium App

I must buy 3 100k resistors NEW because I make the jig but when I measure it it has 291 k
so i must go to my shop to buy the real ones
I will be back tomorrow with an answer
thx again guys

I think 291k should be enough resistance. I remember watching a video of someone using about 291k. But I could be mistaken. Please anyone correct me if I am wrong.
Sent from my Serendipity VII flashed Captivate using xda premium

hello again
i buyed all pieces I build the jig but still nothing
i tried also with a variable resistor of 500k and set it up to 300k, 301k, 291k but still nothing
Can you light me much further?
pls
thx

yaiiiiiiiiiiiiiiiiiiiiiii
I got the Downloading screen
now what tipe of soft I need to download and install and HOW?
Please help
291k with the variable resistor IS THE WINNER
TRUST it
I will put a picture when i make 8 posts

clipocel said:
yaiiiiiiiiiiiiiiiiiiiiiii
I got the Downloading screen
now what tipe of soft I need to download and install and HOW?
Click to expand...
Click to collapse
1. Go here and download a stock rom to install on your captivate.
http://forum.xda-developers.com/showthread.php?t=1300843
Instructions on how to do that are on this page. I suggest going for 2.3.5 gingerbread I897UCKJ3...with bootloaders, then flash the kernel with CWM which is what you use to install other roms.
2. If you are not happy with Gingerbread, and want to get ICS or other custom roms, go here and read up on how to install a new rom over stock.
http://forum.xda-developers.com/showthread.php?t=1350266
Actually, do read up on both stickies to have a better idea of the flashing process. I didn't know a damn thing about flashing 3 weeks ago, and now I've been flashing roms, kernels and modems without any problems. Just make sure to read everything carefully before doing anything. As for which rom is best...well, that's up to you to try and pick out which one is best for you.
Good luck.

hello
After several days under the 4-2ndtwin wing I resolve the problem with my phone.
Thank you very much 4-2ndtwin , you are a very professional man.
291k JIG is the winner in my case, I used I897UCJF6-final-OCD-REV0 and now all is working fine.
Network signal sometimes is very low and it lose signal. Some1 knows wich may be the problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my JIG, my winner

Damn Bricks!
Bricked my phone a few times and fixed it OK until i ran into the "ICS RESET PHONE" bug
Now the only way to fix is by tricking the phone into thinking the external sd card is the inernal sdcard....ADB SDK AVD...three big acronyms for IM SCREWED!
Or am I?
Found some people over at mobiletechvideos to apply the Unbrickable MOD created by Adam Outler (Genius of sorts).
Also they can provide someting called JTAG for very reasonable prices... that is unless you know you can fix it yourself. Which unfortunately I cant right now
or I would just because I know its possible, just not for me..right now.
I think its really sad that the only software to really screw up my phone ICS
was my favorite of all. I hope all is fixed when I get my Unbrickable phone back I CANT WAIT!!!!!!!!!

clipocel said:
hello
After several days under the 4-2ndtwin wing I resolve the problem with my phone.
Thank you very much 4-2ndtwin , you are a very professional man.
291k JIG is the winner in my case, I used I897UCJF6-final-OCD-REV0 and now all is working fine.
Network signal sometimes is very low and it lose signal. Some1 knows wich may be the problem?
Click to expand...
Click to collapse
U could try flashin a newer modem.
I897ucKK4 of course is the latest for captivate.
Sent from my SAMSUNG-SGH-I777 using xda premium

this version of modem I already use it
I have a question : Can I put i9000 rom and stuff?
I know better how to deal with this version.
thx

Yep...as long as u use the ones in the captivate development forum because they have been ported and/or dev'd to work for the cappy--(reoriented kernels, etc, etc.)
Sent from my SAMSUNG-SGH-I777 using xda premium

is anything to tknow before I will try to put i9000 rom on my captivate?

Just read and read and read and be sure that u understand and know what u are doin, as well as the risks and rewards involved. And hit the Dev's thanks button for 'em. They put a lot of time and work in.
Sent from my SAMSUNG-SGH-I777 using xda premium

I think I did something wrong
help

U r soft bricked.
U need a Jig to get ur phone in download mode and then u can flash a Stock Firmware through Odin or Heimdall to get ur phone going again.
If u r on a pc, look in my signature link below. There are links there on how to make a jig or where to buy one.
--U can try to see if ur pc recognizes that screen as an alternate download mode 1st though, because some here have stated that they were able to do that with that screen.--
Sent from my SAMSUNG-SGH-I897 using xda premium

when i put my jig into phone it is show me the same picture.
what is wrong?

L2_hsic issue

Hello guys,
I just found an issue and maybe is a kernel-related one. Battey drained crazily(more than 30%) during the last several hours when I was asleep. I checked the statistics in Betterbatterystats and found that "L2_hsic" kept my phone awake for over 7 hous. (ROM: 4.0.4 Austria , kernel: XXLQ9 )
And this issue was also found in other Samsung devices like Galaxy Note. Here I learnt that it might be due to some codes in kernel.
Please check this out:
http://forum.xda-developers.com/showthread.php?t=1656705
Maybe our devs can kindly help to remove or modify the codes in the kernel or find other solutions. Thank you so much!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Simply flash Ardatdat kernel & then see..also please try not to make a whole thread. Just PM to any user for help or search before posting..:angel:

hdn413 said:
....
I just found an issue and maybe is a kernel-related one. Battey drained crazily(more than 30%) during the last several hours when I was asleep. I checked the statistics in Betterbatterystats and found that "L2_hsic" kept my phone awake for over 7 hous. (ROM: 4.0.4 Austria , kernel: XXLQ9 )
....
Click to expand...
Click to collapse
Yes, it is a known bug in other devices as well.
Simply shutdown the phone, pull out the battery, re-insert and reboot. The problem will be gone!
Also, try not to detach your USB cable when phone screen is off. Always screen on the phone, go to your home screen, and unplug your USB. This could help to prevent the l2_hsic wakelock problem
http://forum.xda-developers.com/showpost.php?p=26705759&postcount=43

kataria.vikesh said:
Simply flash Ardatdat kernel & then see..also please try not to make a whole thread. Just PM to any user for help or search before posting..:angel:
Click to expand...
Click to collapse
Well...thanks for your reply. Actually I flashed ardatdat's latest kernel before but something weird happened, by which I mean it always said that my tf card had been removed. Then I flashed stock kernel XXLQ9 and had it solved. And I just don't know whom I should PM and how many people I should PM before I get this solved. Plus I also wanna know if there's any similar issue like this in our forum because I just searched but found no such post. So I started a new thread. Sorry if I bother you guys.
Sent from my GT-I9103 using Tapatalk 2

ardatdat said:
Yes, it is a known bug in other devices as well.
Simply shutdown the phone, pull out the battery, re-insert and reboot. The problem will be gone!
Also, try not to detach your USB cable when phone screen is off. Always screen on the phone, go to your home screen, and unplug your USB. This could help to prevent the l2_hsic wakelock problem
http://forum.xda-developers.com/showpost.php?p=26705759&postcount=43
Click to expand...
Click to collapse
Thank you ardatdat. I reboot my phone then it's gone. Before this I never paid attention to whether it's awake or not and it seemed nothing special happened. But maybe I should always wake up my phone and then make it discharged from now on. Can this issue be fixed in kernel? Or already fixed in your kernel? Hope I didn't ask for too much.
Sent from my GT-I9103 using Tapatalk 2

hdn413 said:
Thank you ardatdat. I reboot my phone then it's gone. Before this I never paid attention to whether it's awake or not and it seemed nothing special happened. But maybe I should always wake up my phone and then make it discharged from now on. Can this issue be fixed in kernel? Or already fixed in your kernel? Hope I didn't ask for too much.
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
You are welcome. As this problem has no solution in this moment, therefore, I could not say I have fixed it in the kernel. The cause is still a 'mistery'. Thanks.

hdn413 said:
Thank you ardatdat. I reboot my phone then it's gone. Before this I never paid attention to whether it's awake or not and it seemed nothing special happened. But maybe I should always wake up my phone and then make it discharged from now on. Can this issue be fixed in kernel? Or already fixed in your kernel? Hope I didn't ask for too much.
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
hdn413 said:
Well...thanks for your reply. Actually I flashed ardatdat's latest kernel before but something weird happened, by which I mean it always said that my tf card had been removed. Then I flashed stock kernel XXLQ9 and had it solved. And I just don't know whom I should PM and how many people I should PM before I get this solved. Plus I also wanna know if there's any similar issue like this in our forum because I just searched but found no such post. So I started a new thread. Sorry if I bother you guys.
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
Buddy, just PM to anybody in this forum & yes If no reply found then can make a thread bt can ask at Kernel & ROM thread first:victory:. As your problem is solved, now can close this thread.:highfive: Also, You can press thanx button to Ardatdat for Help rather then saying to it(sometimes words speak & sometimes THANKS button speak louder than word). Unfortunately, my all thanks is over for today else I can give it to adratdat on your behalf.
Reported to Justin

Glad you found an answer my friend
Closed!

(q) baseband downgrade guide request

I feel like a noob but am completely stumpped at this moment. Trying the kdz method to downgrade to Jul Baseband. Ive tried everything. Even whipped up a WinXP machine on VMWare, as the upgrade app crashes on Win7 without fail. Phone gets seen, kdz unpacks, starts process, at the point where the Pc starts disconnecting /connecting phone I get stuck at param 3053 everytime. But the phone doesn't brick. Everything stays as it was so I'm wondering if the problem may be an issue with my kdz download.
Someone who has successfully downgraded please post a downgrade reference.
Sent from my LG-P999 using xda app-developers app

I've used the KDZ_FW_update offline fix by spyrosk to downgrade before. It comes with some pretty good step-by-step instructions:
http://forum.xda-developers.com/showpost.php?p=22189294&postcount=30
I also have the KDZ files for V21E_00.KDZ, V21E_00.01.KDZ, and V21Y_00.KDZ here:
http://www.mediafire.com/?rtwns1ftwsy18

Oh man. Thank you so much for the hosted kdz!
Ill try again. Did you use XP, vista, or 7?
Sent from my LG-P999 using xda app-developers app

I used Windows 7. The KDZ's are still uploading so give them some time. Good luck!

ChopperJ said:
I used Windows 7. The KDZ's are still uploading so give them some time. Good luck!
Click to expand...
Click to collapse
What is the difference between the 2 21E files?
I had the first one V21E_00 and I was told I needed the other one V21E_00_01 for the P999DW model.
Do you know anymore detail in regards to those 2 kdz?

justjackyl said:
What is the difference between the 2 21E files?
I had the first one V21E_00 and I was told I needed the other one V21E_00_01 for the P999DW model.
Do you know anymore detail in regards to those 2 kdz?
Click to expand...
Click to collapse
I heard the same thing regarding the V21E_00_01 being T-Mobile G2x (or at least DW model) specific but don't know much more than that. That's the one I used and it worked perfectly. We're in the same boat... I'd be interested in finding out if there is a difference and what it could be too.

ChopperJ said:
I heard the same thing regarding the V21E_00_01 being T-Mobile G2x (or at least DW model) specific but don't know much more than that. That's the one I used and it worked perfectly. We're in the same boat... I'd be interested in finding out if there is a difference and what it could be too.
Click to expand...
Click to collapse
Well the only thing I am doing differently tonight is using the 00.01.kdz instead of just the 00.kdz
So if it goes thru with no flaws than I'd say
V21E_00=P999
V21E_00_01=P999DW
I'll know in about 10-15min. lol

ChopperJ said:
I heard the same thing regarding the V21E_00_01 being T-Mobile G2x (or at least DW model) specific but don't know much more than that. That's the one I used and it worked perfectly. We're in the same boat... I'd be interested in finding out if there is a difference and what it could be too.
Click to expand...
Click to collapse
*sighs* Just bricked. NVFlash and start over again.
Updater lost comm w/phone.

justjackyl said:
*sighs* Just bricked. NVFlash and start over again.
Updater lost comm w/phone.
Click to expand...
Click to collapse
Where you can select CDMA and theother one, DIAG
What do you select?
The guide says something completely different to use, but I assumed that was for a different LG model phone?

justjackyl said:
Where you can select CDMA and theother one, DIAG
What do you select?
The guide says something completely different to use, but I assumed that was for a different LG model phone?
Click to expand...
Click to collapse
After 6 hours, 3 PCs and a VM later...
It still won't flash.
I always end up at iPARAM = 3035 and that's it. Just sits. FOREVER. Have read tons, AND TONS of info and tried different tactics to no avail.
ALL I WANT IS FOR BT TO WORK ON CM7!! GRRRR!!!

justjackyl said:
After 6 hours, 3 PCs and a VM later...
It still won't flash.
I always end up at iPARAM = 3035 and that's it. Just sits. FOREVER. Have read tons, AND TONS of info and tried different tactics to no avail.
ALL I WANT IS FOR BT TO WORK ON CM7!! GRRRR!!!
Click to expand...
Click to collapse
I followed the instructions to the letter and had no problems. At step 5 you choose 3gQCT not CDMA or anything else:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also when running 'windows enabler.exe', wait for it to show 'ON' in the taskbar. It took a little while to register for me:

And, set all related applications as not blocked and to run as administrator in their preferences settings.

if you still need help, i was having the same problems as you. just to upgrade. all you need to do is go back to COMPLETE stock, that means unrooting too. it took me 3 days to figure that out and even ran windows xp on my computer to try and do it with thte same results. i honestly wish that we could use NVFlash (i have used it to flash the baseband to my gTablet). after that if it doesnt work the first time it should in about 3. sometimes its just something with the hacked server not running right.

No IMEI or Signal or phone operator

Some one gave me a GT-I9003 with a "little problem"
it dont have MEI or Signal or phone operator. i doesnt work as a phone
i did this and another guides http://forum.xda-developers.com/showthread.php?t=1264021&nocache=1 but nothing works, some one could give me a hand with this problem please?
I didnt have a copy of EFS folder before the problem. The person who gave me the phone said that he didnt do anything to the phone, one day the phone became useless.
Thanks for the time

No EFS = No phone usage...

1up_ said:
Some one gave me a GT-I9003 with a "little problem"
it dont have MEI or Signal or phone operator. i doesnt work as a phone
i did this and another guides http://forum.xda-developers.com/showthread.php?t=1264021&nocache=1 but nothing works, some one could give me a hand with this problem please?
I didnt have a copy of EFS folder before the problem. The person who gave me the phone said that he didnt do anything to the phone, one day the phone became useless.
Thanks for the time
Click to expand...
Click to collapse
its not a small problem mate... its a life threatning problem,,, A little piece of advice... return it to the person you took from because the chances to recover IMEI are very slim and should proceed on your own risk and then and only then I will redirect you to another method which is a bit complicated.. choice is yours

mustafahussain said:
its not a small problem mate... its a life threatning problem,,, A little piece of advice... return it to the person you took from because the chances to recover IMEI are very slim and should proceed on your own risk and then and only then I will redirect you to another method which is a bit complicated.. choice is yours
Click to expand...
Click to collapse
go ahead ..please post the other method...even i have the same issue...ie. Blank IMEI and unknown Baseband

mustafahussain said:
its not a small problem mate... its a life threatning problem,,, A little piece of advice... return it to the person you took from because the chances to recover IMEI are very slim and should proceed on your own risk and then and only then I will redirect you to another method which is a bit complicated.. choice is yours
Click to expand...
Click to collapse
Unless the gut who gave it to you have the EFS folder backed up. Suggestion: RTS (Return To Sender), obviously he forgot what Dhiru said before flash Alpha 4:'Backed up your EFS folder just in case you lost your IMEI'. Its almost impossible to lost your IMEI on stock unless you deleted the EFS folder, which is a very stupid move, LoL.
Sent from my GT-I9003 using xda app-developers app

Someone told me that flash back stock and try to turn airplane mode on and off can get back the imei and baseband. Do with simcard inserted.
Sent from my Galaxy Nexus using Tapatalk 2

I know that it's a difficult problem, but i got free.
Free phone or nothing what do you choose?
I dont have the backup of EFS folder before the problem.
mustafahussain said:
its not a small problem mate... its a life threatning problem,,, A little piece of advice... return it to the person you took from because the chances to recover IMEI are very slim and should proceed on your own risk and then and only then I will redirect you to another method which is a bit complicated.. choice is yours
Click to expand...
Click to collapse
I choose difficult give me the direction to find the way.
Im tryin this method http://forum.xda-developers.com/showthread.php?t=1802024&page=2 but icant open hidden menu #22745927 or *#7284#
chongns said:
Someone told me that flash back stock and try to turn airplane mode on and off can get back the imei and baseband. Do with simcard inserted.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I'll back to stock, but it's useless.
is stuck in airplane mode, I can not get it out.

1up_ said:
I know that it's a difficult problem, but i got free.
Free phone or nothing what do you choose?
I dont have the backup of EFS folder before the problem.
I choose difficult give me the direction to find the way.
Im tryin this method http://forum.xda-developers.com/showthread.php?t=1802024&page=2 but icant open hidden menu #22745927 or *#7284#
I'll back to stock, but it's useless.
is stuck in airplane mode, I can not get it out.
Click to expand...
Click to collapse
it can resolve your problem... try to go back to stock DDLF2 there is a chance to recover your IMEI and lost baseband..
also have you tried this?
http://forum.xda-developers.com/showthread.php?t=1308546

mustafahussain said:
it can resolve your problem... try to go back to stock DDLF2 there is a chance to recover your IMEI and lost baseband..
also have you tried this?
http://forum.xda-developers.com/showthread.php?t=1308546
Click to expand...
Click to collapse
Now I am in stock DDLF2
I tryied but . . . .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Im trying to fix the problem to use the program.
How do I enter to Diag Mode?

1up_ said:
Now I am in stock DDLF2
I tryied but . . . .
Im trying to fix the problem to use the program.
How do I enter to Diag Mode?
Click to expand...
Click to collapse
you need to have Microsoft .NET Framework v4.0 installed on your PC... do you have it?

Diag mode for Qualcomm chip only
Sent from my Galaxy Nexus using Tapatalk 2

mustafahussain said:
you need to have Microsoft .NET Framework v4.0 installed on your PC... do you have it?
Click to expand...
Click to collapse
Yeah I have it.
It doesnt work, wtf

same with me
Sent from my GT-I9003 using xda premium

[q] tried rooting my galaxy s6 using chainfare's method, stuck at boot screen :(

Hey there, a few hours back, i tried rooting my galaxy s6 using chainfare's root method, link below:
Link wont get added, it is in ibntimesdotcodotuk
Now, i am stuck at the boot screen, it wont start, cant even remove the battery because now it longer has removable batteries, i did go trough a few articles asking me to get into recovery mode by pressing 3 buttons after i switch off the device, the device wont switch off in the first place, how can i fix this? anyone ;(

Hi, thank you for using XDA Assist. You're probaly going to have to flash the stock firmware with odin. But I'm not sure it's even available yet. I'm going to move your thread here where you may get some help, http://forum.xda-developers.com/galaxy-s6/help

Hello,
Can you give some more details -
What version of SGS6 are you using? Edge or standard?
Can you remember what firmware version you were on?
And what file did you flash?
Check out the sgs6 chainfire thread here where i read about some others that had got stuck in a boot loop and needed to either update their odin version or chainfires new root.
http://forum.xda-developers.com/galaxy-s6/orig-development/cf-auto-root-t3056630/post60040963

I had the same problem yesterday. I flashed my original firmware which I got from sammobile.com (I got the "Netherlands" version for the G950F). Tried the latest version today after Chainfire said he updated it. Worked like a charm. So:
1. Got stuck at boot screen
2. Went back into download mode
3. Flashed original firmware from sammobile.com
4. Root using latest autoroot and Odin 3.10.6.
Good luck!

FrankSpank said:
I had the same problem yesterday. I flashed my original firmware which I got from sammobile.com (I got the "Netherlands" version for the G950F). Tried the latest version today after Chainfire said he updated it. Worked like a charm. So:
1. Got stuck at boot screen
2. Went back into download mode
3. Flashed original firmware from sammobile.com
4. Root using latest autoroot and Odin 3.10.6.
Good luck!
Click to expand...
Click to collapse
Did you use a foreign odin for your phone? Are you in the USA?

Brava27 said:
Did you use a foreign odin for your phone? Are you in the USA?
Click to expand...
Click to collapse
I'm from The Netherlands and used the Odin included in the download from Chainfire's website.

Oh I see. Thanks

Hi I'm in the same boat, my problem is I can't get it back into download mode. I can hold down the vol down and power to reboot it, but nothing else.

Question answered. Thread closed.

draiman11 said:
Hi I'm in the same boat, my problem is I can't get it back into download mode. I can hold down the vol down and power to reboot it, but nothing else.
Click to expand...
Click to collapse
Had the same problem, keep holding the buttons as it reboots and it will come in download mode. Worked for me [emoji4]

jd1639 said:
Question answered. Thread closed.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the part where I troll you for thinking you have mod privileges outside of the Assist forum

Jonny said:
This is the part where I troll you for thinking you have mod privileges outside of the Assist forum
Click to expand...
Click to collapse
That'll teach me for looking on my mobile app. Forgot I request it to be moved, lol
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
That'll teach me for looking on my mobile app. Forgot I request it to be moved, lol
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, t'was moved by Ronnie

Jrhoop said:
Hello,
Can you give some more details -
What version of SGS6 are you using? Edge or standard?
Can you remember what firmware version you were on?
And what file did you flash?
Check out the sgs6 chainfire thread here where i read about some others that had got stuck in a boot loop and needed to either update their odin version or chainfires new root.
http://forum.xda-developers.com/galaxy-s6/orig-development/cf-auto-root-t3056630/post60040963
Click to expand...
Click to collapse
i am sorry about the delayed response, as i was going through blogs for a fix, i finally found the magician who tried every file that was available in the list, i did the same, i tried flashing other versions, like one for the s6 edge, and a few others , i don't remember which one,but one worked fine and that problem is solved, i had the s6, standard, SM-g920f, now i have another issue for which i am trying to unroot now. the camera goes blurred fo a few seconds to sometimes over a minute, i realised its a manufactoring defect and i am not alone, saw youtube videos of people complaining the same and replacing it, now i am going for that.. Thank you all for the help.

FrankSpank said:
I had the same problem yesterday. I flashed my original firmware which I got from sammobile.com (I got the "Netherlands" version for the G950F). Tried the latest version today after Chainfire said he updated it. Worked like a charm. So:
1. Got stuck at boot screen
2. Went back into download mode
3. Flashed original firmware from sammobile.com
4. Root using latest autoroot and Odin 3.10.6.
Good luck!
Click to expand...
Click to collapse
i got it done with some other version available in the same chainfare website then, but what you told here, i am doing it now, as i have issues with camera (so many has it, out of focus for the first 30-40 seconds) and needs to get it replaced. hopefully, they wont find out my s6 were rooted once, fingers crossed