Captuvate help - Captivate General

I brought this phone last year and it turns to show me this picture
RST_STAT =0x1
PWIC_IRQ1 =0x0
PWIC_IRQ2 =0x0
PWIC_IRQ3 =0x0
PWIC_IRQ4 =0x0
PWIC_STATUS1=0x00
PWIC_STATUS2=0x0
What should I do?
Can I repair it?
Please help.

Try a Jig to get it in Download mode and then Odin/Heimdall a Stock Rom.
If u r on a pc, check out my signature below for some links...
Sent by XDA Premium App

I tried and no result
what I do wrong?

Looks like kernel panic. If your PC doesn't recognize your phone prior to using Odin to get back to stock, take the battery out for a few minutes and try again or use heimdall
Sent from my SGH-I897 using XDA

clipocel said:
I tried and no result
what I do wrong?
Click to expand...
Click to collapse
What specific result did u get...?
Sent by XDA Premium App

I must buy 3 100k resistors NEW because I make the jig but when I measure it it has 291 k
so i must go to my shop to buy the real ones
I will be back tomorrow with an answer
thx again guys

I think 291k should be enough resistance. I remember watching a video of someone using about 291k. But I could be mistaken. Please anyone correct me if I am wrong.
Sent from my Serendipity VII flashed Captivate using xda premium

hello again
i buyed all pieces I build the jig but still nothing
i tried also with a variable resistor of 500k and set it up to 300k, 301k, 291k but still nothing
Can you light me much further?
pls
thx

yaiiiiiiiiiiiiiiiiiiiiiii
I got the Downloading screen
now what tipe of soft I need to download and install and HOW?
Please help
291k with the variable resistor IS THE WINNER
TRUST it
I will put a picture when i make 8 posts

clipocel said:
yaiiiiiiiiiiiiiiiiiiiiiii
I got the Downloading screen
now what tipe of soft I need to download and install and HOW?
Click to expand...
Click to collapse
1. Go here and download a stock rom to install on your captivate.
http://forum.xda-developers.com/showthread.php?t=1300843
Instructions on how to do that are on this page. I suggest going for 2.3.5 gingerbread I897UCKJ3...with bootloaders, then flash the kernel with CWM which is what you use to install other roms.
2. If you are not happy with Gingerbread, and want to get ICS or other custom roms, go here and read up on how to install a new rom over stock.
http://forum.xda-developers.com/showthread.php?t=1350266
Actually, do read up on both stickies to have a better idea of the flashing process. I didn't know a damn thing about flashing 3 weeks ago, and now I've been flashing roms, kernels and modems without any problems. Just make sure to read everything carefully before doing anything. As for which rom is best...well, that's up to you to try and pick out which one is best for you.
Good luck.

hello
After several days under the 4-2ndtwin wing I resolve the problem with my phone.
Thank you very much 4-2ndtwin , you are a very professional man.
291k JIG is the winner in my case, I used I897UCJF6-final-OCD-REV0 and now all is working fine.
Network signal sometimes is very low and it lose signal. Some1 knows wich may be the problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my JIG, my winner

Damn Bricks!
Bricked my phone a few times and fixed it OK until i ran into the "ICS RESET PHONE" bug
Now the only way to fix is by tricking the phone into thinking the external sd card is the inernal sdcard....ADB SDK AVD...three big acronyms for IM SCREWED!
Or am I?
Found some people over at mobiletechvideos to apply the Unbrickable MOD created by Adam Outler (Genius of sorts).
Also they can provide someting called JTAG for very reasonable prices... that is unless you know you can fix it yourself. Which unfortunately I cant right now
or I would just because I know its possible, just not for me..right now.
I think its really sad that the only software to really screw up my phone ICS
was my favorite of all. I hope all is fixed when I get my Unbrickable phone back I CANT WAIT!!!!!!!!!

clipocel said:
hello
After several days under the 4-2ndtwin wing I resolve the problem with my phone.
Thank you very much 4-2ndtwin , you are a very professional man.
291k JIG is the winner in my case, I used I897UCJF6-final-OCD-REV0 and now all is working fine.
Network signal sometimes is very low and it lose signal. Some1 knows wich may be the problem?
Click to expand...
Click to collapse
U could try flashin a newer modem.
I897ucKK4 of course is the latest for captivate.
Sent from my SAMSUNG-SGH-I777 using xda premium

this version of modem I already use it
I have a question : Can I put i9000 rom and stuff?
I know better how to deal with this version.
thx

Yep...as long as u use the ones in the captivate development forum because they have been ported and/or dev'd to work for the cappy--(reoriented kernels, etc, etc.)
Sent from my SAMSUNG-SGH-I777 using xda premium

is anything to tknow before I will try to put i9000 rom on my captivate?

Just read and read and read and be sure that u understand and know what u are doin, as well as the risks and rewards involved. And hit the Dev's thanks button for 'em. They put a lot of time and work in.
Sent from my SAMSUNG-SGH-I777 using xda premium

I think I did something wrong
help

U r soft bricked.
U need a Jig to get ur phone in download mode and then u can flash a Stock Firmware through Odin or Heimdall to get ur phone going again.
If u r on a pc, look in my signature link below. There are links there on how to make a jig or where to buy one.
--U can try to see if ur pc recognizes that screen as an alternate download mode 1st though, because some here have stated that they were able to do that with that screen.--
Sent from my SAMSUNG-SGH-I897 using xda premium

when i put my jig into phone it is show me the same picture.
what is wrong?

Related

[GUIDE]SuperOneClick - Root/Unroot Your Samsung Sidekick 4G (No CWM)

This is a Guide to Easily Root and Unroot Your Sidekick 4G
-Preparing for Root
First, if you dont have them already get the Samsung Drivers for Windows to connect your phone to your PC.
x64
x86
Once you have the Drivers installed, proceed to rooting your device
-Rooting the Device
First you must have USB Debugging enabled. This can be done by starting at your home screen, select Settings > Applications > Development and then select USB Debugging so that a Check appears on the selection box. Then Connect it to your PC
At The Bottom Of This Page(@Shortfuse_org)You Will Find the Download for the latest SuperOneClick [v.1.9.1].
Once Downloaded, Extract the Contents of the Zip to a location of your choice.
Navigate to the Loction you extracted this folder to, Double click on the .exe file named SuperOneClick.exe.. Run the Application.
It Has a Very Basic and Simple Interface as shown Below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Next, All you have to Do is Simply Click the Root Button
Let the App Run and it Will Let you know its Done by Giving you the Option to Test root. You can choose yes or no, your choice.
Then Reboot your Device to Complete the Root.
And thats it, your Device is Now Rooted.
If this guide was helpful, please use the thanks button.
Credits to XDA Member @CLShortFuse for this Brilliant Root App
Great job teddy...
Can anyone confirm that unroot works as well?
Without a working odin image or nandroid I think its important in the event of a hardware issue.
Sent from my SGH-T839 using XDA App
Nice guide. Looks like the one I made on AndroidSpin.com
Sent from my LG-P999 using XDA App
krylon360 said:
Nice guide. Looks like the one I made on AndroidSpin.com
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
haha its no coincidence i saw it and decided it'd be a good idea to post that method here since it doesnt flash an unstable recovery like the other method up here, also hope you dont mind that i used your snapshot of the app lol
No worries bud. Was just messing with you. Now that we got CWM final done for the SGS4G, im gonna start on cwm for the sk4g. Just had to many projects going on at the time
Sent from my LG-P999 using XDA App
krylon360 said:
No worries bud. Was just messing with you. Now that we got CWM final done for the SGS4G, im gonna start on cwm for the sk4g. Just had to many projects going on at the time
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
best news i heard this week. plenty of people over here looking forward to test including myself, got a thread in the general section and got some feedback from people who are willing to help progression with the CWM project. Thanks bro
mattpall said:
Great job teddy...
Can anyone confirm that unroot works as well?
Without a working odin image or nandroid I think its important in the event of a hardware issue.
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Same question: Can anyone confirm unroot? I'd love to root, but I want a way back out just in case.
Kuzar said:
Same question: Can anyone confirm unroot? I'd love to root, but I want a way back out just in case.
Click to expand...
Click to collapse
i just re-rooted my phone from stock, testing the Unroot now
Edit: it seems unroot didnt work, though like mentioned above you would only want to unroot incase of hardware issue or you want t replace the phone wit T-Mo, but thats all good now cause i posted a working Odin image earlier.
So cwm doesn't work for the sidekick 4g
Sent from Huawei Ascend rooted Cm 7/2.3.4 using Tapatalk
it's close
i dunno about you but the root and unroot both worked for me i had no problem unrooting it
Maybe it does work I only tried once ;
Sent from my SGH-T839 using XDA App
First off thank you for the easy root But now I have an issue, the SD card wont work, looks like it wont find the extension anyone know how to fix this? Ive used many different card and none read but I know all work. Without this I cant do a ROM
Try reformatting the card? Did they work before you rooted? do they work again if you unroot?
They worked before the root, I didn't unroot yet. When you out then in the phone and go to the SD card setting it shows nothing. Just says unavailable. So I can't even format it on the phone. I've formatted them in many ways on the pc too
HTC EVO = my best friend
did you try pulling out the sdcard and putting it back in? does it show a blank sdcard, or no sdcard at all?
need a mirror, site is down
I cannot get # in adb. Only $. Can anyone tell me why? I rooted with this method and have smooth maximus v2.0 and bali kernel v2.0. Any ideas?
Edit: Nvm. I had to update the drivers with the ones here.
jahnbodah said:
need a mirror, site is down
Click to expand...
Click to collapse
Second that - been unable to get this yesterday and today so far.
Used this: http://hotfile.com/dl/115623149/42a5e65/SuperOneClickv1.9.1-ShortFuse.Drivers.rar
Im trying to root my phone and it keeps saying device not found after looping in superoneclick 1.9....i downloaded the 32 bit drivers because my computer is 32 bits tried to download the 64 bits but no way to install on my comp...i have usb debugging checked ....any suggestions anybody elese had a problem rooting it ?

[Q] Help rooting S Galaxy S2 (noob)

Hi
first off, if I am braking any rules by posting this here then pls direct me to the correct forum (very sorry if its in wrong place)
anyhow, I just got a new contract with a Samsung Galaxy S2 on virgin mobile (UK) & am hoping to root it so I can "maybe" install a new rom etc but the main reason I want root is because of the bloat that came with the phone. I don't really want to damage the phone, so I wont try until I know I am confidant in doing it without killing my baby.
can anybody either tell me how search works here because I cant find any info, or failing that tell/show me the easiest safest way to gain root on my baby.
if I root will virgin be able to tell if I ever need to send it in for repairs. I've heard of yellow triangles & flash counters & USB jigs & am very, very confuzed. pls help
I believe your model is the i9100, if so follow the guide below.
http://forum.xda-developers.com/showthread.php?t=1075278
Thanks fella
Sent from my GT-I9100 using Tapatalk
Just looked at that post & to be honest im more confused than ever. Is there anybody on xda that can connect to my pc via team viewer & root it for me pls?
Sent from my GT-I9100 using Tapatalk
blade30p said:
Just looked at that post & to be honest im more confused than ever. Is there anybody on xda that can connect to my pc via team viewer & root it for me pls?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
You can root via kernel which is the easiest
Sent from my LG-V909 using Tapatalk
if I root using this method can Samsung find out if I have to send it back, or is my warranty null & viod if I root?. thanks
I believe any method of rooting will void your warranty, so its best to return it to stock before sending it back to Samsung.
So again ill ask, is there any way for sum one to connect to my pc & root it for me pls? I don't want ics flashing, I just want root.
Sent from my GT-I9100 using Tapatalk
It's not that difficult, invest some time and you can do it yourself.
There are even youtube videos guiding people how to root their device.
If you have trouble or questions about a specific step ask here.
I wouldn't recommend giving a random person access to your computer via teamview...
Its usually:
- Find out what ROM version you currently have
- Look for the right kernel with root matching your ROM
- Get usb drivers for your computer
- Reboot your device in download mode
- Use Odin or Heimdall to flash the new kernel
From a quick glance, this looks pretty solid:
http://reviews.cnet.co.uk/mobile-phones/how-to-root-your-samsung-galaxy-s2-50004972/
Edit: was bored looked around some more.
So this actually is okay too:
http://forum.xda-developers.com/showthread.php?t=1118693
And this was the one i used to root a friends sgs2:
http://forum.xda-developers.com/showthread.php?t=1103399
Most difficult part was actually choosing the right kernel fitting the ROM, too much choice
thanks for the info.
can you tell me exactly which unsecure firmware to go for pls?
these are my kernel version etc on my phone...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cheers
bump
Sent from my GT-I9100 using Tapatalk
A comprehensive guide will be available if you take your time and dig the sub-forums for the S2.
hey man ,
take a look at this , it's a one click thing. super easy super safe. your warranty won't work anymore , you have to be aware of that. so here you go
(i'm a new member of xda so i'm not allowed to post links)
there is a website called galaxys2root you will find a root galaxy s2 guide .
blade30p said:
bump
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Try SuperOneClick. It's literally 1 click to root...
http://forum.xda-developers.com/showthread.php?t=803682
You'll need the drivers for your phone already installed (Kies installs them for you), and you'll need to kill all processes that are related to Kies. Just read what to do on the above mentioned thread and you'll be rooted in no time.
Archer said:
Try SuperOneClick. It's literally 1 click to root...
http://forum.xda-developers.com/showthread.php?t=803682
You'll need the drivers for your phone already installed (Kies installs them for you), and you'll need to kill all processes that are related to Kies. Just read what to do on the above mentioned thread and you'll be rooted in no time.
Click to expand...
Click to collapse
yup that's exactly what i meant!
karimas said:
yup that's exactly what i meant!
Click to expand...
Click to collapse
Yup, I gathered that. Have a thanks
OK so I found the insecure & secure kernel for my fone (XWKI4) & I'm pretty sure cf-root is the way to go to gain root, but now I'm confused about the custom can in cf-root, I've read that in ics USB storage don't work, video record don't work etc so my question is this, should I root it at all as ics official will be out very soon & that has everything working except flash so should i wait? The 1 thing that's pushing me towards say CM9 ICS is the lack of touchwiz UI, if i choose a custom rom I get the full ICS UI experience which is what I'm after, but as this phone is very expensive I really don't like the idea of voiding my warranty 2 weeks into a 12 month contract. Suggestions welcome (& yes I've spent 6 days reading ALL sections & posts.)
Sent from my GT-I9100 using Tapatalk
Why isn't my last post showing up?
Sent from my GT-I9100 using Tapatalk
you got it wrong man , you don't need the secure and insecure kernel anymore , look for the superonclick method. all you have to do is download a couple of stuff , plug your phone and click.
http://forum.xda-developers.com/showthread.php?t=803682
everything works on ICS , it depends on the ROM you choose. so far the only incomplete ROM is the Cyanogenmod 9. but i'm currently on Resurrection ICS Remix v1.0 ( http://forum.xda-developers.com/showthread.php?t=1436854 )
and it runs great. it's blazing fast and super stable and everything works great. including camera and sd storage.
Cheers so if I root with SOC how do i then install Clockworkmod so i can flash ics resurection? Thanks for all the answers
Sent from my GT-I9100 using Tapatalk

[REQUEST]-(6210)-Nandroid of stock ROM

I softbricked my P6210 (Wifi only for those that don't know the model no.) and I didn't Nandroid before it happened. Can anyone upload/send me a Nandroid of the STOCK rom for this tablet? Please? The tablet is my son's and I feel like a total noob dad for messing up his tablet.
Why don't you odin back to the stock rom?
Sent from my Nexus S using XDA
Here is a guide on how to get odin working on your computer, you can get the stock firmware from the stock firmware thread that is right here in the developers section (btw you posted your question in the wrong section.)
Sent from my Nexus S using XDA
bdds13 said:
Here is a guide on how to get odin working on your computer, you can get the stock firmware from the stock firmware thread that is right here in the developers section (btw you posted your question in the wrong section.)
Sent from my Nexus S using XDA
Click to expand...
Click to collapse
I can't run Odin cuz I don't have a PC. I'm on a MAC. And I can't find the Heimdall files to flash over. If this is in the wrong section, I'm sorry. I thought since I was requesting a Nandroid backup of a ROM that this belongs in development.
Mod, if this belongs in Q&A, feel free to move. And again, my apologies.
Sent from my LG-P999 using XDA
Also, I don't think that your hyper link worked, there is no link to "here" for that guide.
Sent from my LG-P999 using XDA
Hi there
Do not worry. It is easy to come back to the stock Rom. I have done this a hundred of times already. You only need to read a little bit the process to install via ODIN, I recommend you use a windows based software in order to make your software work with your tablet. Do not forget to install Samsung kies with the driver to communicate with the device as well as the odin software with the stock Rom which you can find both programs in this link:
http://forum.xda-developers.com/showthread.php?t=1367478
I hope you can find this information useful.
God bless you....
Godwarrior1 said:
Do not worry. It is easy to come back to the stock Rom. I have done this a hundred of times already. You only need to read a little bit the process to install via ODIN, I recommend you use a windows based software in order to make your software work with your tablet. Do not forget to install Samsung kies with the driver to communicate with the device as well as the odin software with the stock Rom which you can find both programs in this link:
http://forum.xda-developers.com/showthread.php?t=1367478
I hope you can find this information useful.
God bless you....
Click to expand...
Click to collapse
My issue is that I'm on Mac... No access to a Windows based PC...
Sent from my LG-P999 using XDA
Mobile ODIN is still an option as well.
Sent from my SPH-D700 using xda premium
Ceelos09 said:
Mobile ODIN is still an option as well.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I looked around at Mobile Odin and Im not sure how to get that running on a soft brick... How can I install and run it on a tab that doesnt boot?
nickmcghee said:
My issue is that I'm on Mac... No access to a Windows based PC...
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
I use a Mac and have installed Windows via Bootcamp. Would that be something you feel comfortable doing to have access to the Windows platform when you need it? It's pretty easy to do (lots of tutorials out there including one from Apple) and because it is free ATM, I installed Windows 8 consumer preview - and it runs pretty well on my Mac.
VitaZora said:
I use a Mac and have installed Windows via Bootcamp. Would that be something you feel comfortable doing to have access to the Windows platform when you need it? It's pretty easy to do (lots of tutorials out there including one from Apple) and because it is free ATM, I installed Windows 8 consumer preview - and it runs pretty well on my Mac.
Click to expand...
Click to collapse
+ 1 VitaZora is right, you cannot stop yourself from reviving your device only 'cuz you have not a "real" PC! C'mon just emulate Windows OS and use Odin. You'll be safe
Sent from my Galaxy Note with Asylum ICS 06
FINALLY!!!!!!!!!!!!!!!
[David] said:
+ 1 VitaZora is right, you cannot stop yourself from reviving your device only 'cuz you have not a "real" PC! C'mon just emulate Windows OS and use Odin. You'll be safe
Sent from my Galaxy Note with Asylum ICS 06
Click to expand...
Click to collapse
Funny thing, I actually did install Windows 8 CP as a Virtual Box, but my wife refused to let me parrallel it... She said "You wanted a Mac, not a PC. I'm not having you put Windows on the Mac... When I did a Virtual Box on it tho, the usb wouldn't recognize the tab, even with drivers installed... But I was able to get a hold of a Windows based PC for a little while early this morning and Odin'd the Tab back to stock... Finally..... Thank you everyone who provided help and tried to find a solution to my issue... This is why I LOVE this site and (most of) the people in it... When a member has an issue, other members take care of it... Its really awesome... Thanks again...
MOD----- CLOSE THREAD PLEASE----
Also, lastly, because everyone here was so helpful to me, you have all received official "thanks" from me... Thank you all again...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My son, and his new tablet

[Q] bad flash will not will not turn on!

to start, my phone is rooted and unlocked and ive flashed plenty of times. ive even lost my meid and restored it before but, this is different.
I downloaded slimbean rom which iv flashed before in the past and worked fine. when i flashed this time though (i always clear cach clear data) and soon at it was done i rebooted my phone and it completely turned of imediately( I had roughly 50% battery left). my computer recognizes my phone but the phones screen stays black and will not charge. It will not power on in any mode download recovery etc....
Any suggesttions guys?
Did u try battery pull?
Android 4 Life
Droopydroors said:
Did u try battery pull?
Android 4 Life
Click to expand...
Click to collapse
Or holding power down for 10-15 seconds?
Sent from my SPH-L710 using Tapatalk 2
What does or PC see the phone as? MTP, modem, adb?
barkermichaelj said:
Or holding power down for 10-15 seconds?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
ive done them both...they were my first things i tried..
I acctually think i may have downloaded a fake/corrupt rom..if it was a rom.
when i flashed it loaded extremely fast. my initial reaction was, wow this is super light weight but, it should have been a flag....i could be wrong.
billard412 said:
What does or PC see the phone as? MTP, modem, adb?
Click to expand...
Click to collapse
windows devic installation
hs-usb diagnostics 9008 (com-10)
my pc says its installed
A battery pull then volume up+home+power?
Sent from my SPH-L710 using Tapatalk 2
barkermichaelj said:
A battery pull then volume up+home+power?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
This!
or
Can you boot into Odin mode?
Something went wrong. Hate to tell you but, You're bricked.
Qhsusb_dload is what it should be but windows installed the diagnostic drivers instead. All in all, not what you want to see in device manager. its the kiss of death for our phone. Your gna need to jtag it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<<<<<-----bricked phone in device mgr
billard412 said:
Something went wrong. Hate to tell you but, You're bricked.
Qhsusb_dload is what it should be but windows installed the diagnostic drivers instead. All in all, not what you want to see in device manager. its the kiss of death for our phone. Your gna need to jtag it
<<<<<-----bricked phone in device mgr
Click to expand...
Click to collapse
. lets say i decide not to jtag it and just send my phone in for replacment through my warranty...is it void? can they tell? its free according to my warranty if the phone is "faulty". (either bad processor or something went wrong through a ota update) would that work?
whats gna and jtag?
thanks for the help!! thats all the questions i can think of lol
Sorry thats Gonna need JTAG ------>>> http://www.youtube.com/watch?v=XnA8Djs55Ds Technically yes your warranty is void. Samsung should/can see that you flashed it but you can send it to them and they will fix and send back according to other members. Appearently they arent checking/dont care. Verizon will probably replace it if you play stupid seeing as how it was "locked" and there no way you could messed with it *cough *cough. Although samsung can, Verizon cant tell in that state
Terry_blair said:
. lets say i decide not to jtag it and just send my phone in for replacment through my warranty...is it void? can they tell? its free according to my warranty if the phone is "faulty". (either bad processor or something went wrong through a ota update) would that work?
whats gna and jtag?
thanks for the help!! thats all the questions i can think of lol
Click to expand...
Click to collapse
You mean commit fraud? MD5sum. It exists for a reason. Admit your screw up and pay to have it jtaged.
Sent from my SCH-I535 using xda app-developers app
nosympathy said:
You mean commit fraud? MD5sum. It exists for a reason. Admit your screw up and pay to have it jtaged.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
^^^^Saw that coming.
why i always recomend jtag first. Then fraud only after its suggested by someone else. And i say **** it, verizon screwed people that bought it not knowing it was locked, time to screw em back
btw when was the last time you flashed a rom in recovery and it had an md5 on it? I mean lets get real here. MD5 wouldnt have saved him here anyway
You can use Android File Verify to make sure MD5 is correct. It is in the market....
Sent from my SCH-I535 using xda premium
Pull the bat wait a cpl seconds and just leave it on ur wall charger. It should come back on..
Sent from my GS3 using xda premium
---------- Post added at 07:45 PM ---------- Previous post was at 07:37 PM ----------
P2o8wer said:
Pull the bat wait a cpl seconds and just leave it on ur wall charger. It should come back on..
Sent from my GS3 using xda premium
Click to expand...
Click to collapse
Nevermind
Sent from my GS3 using xda premium
billard412 said:
^^^^Saw that coming.
why i always recomend jtag first. Then fraud only after its suggested by someone else. And i say **** it, verizon screwed people that bought it not knowing it was locked, time to screw em back
btw when was the last time you flashed a rom in recovery and it had an md5 on it? I mean lets get real here. MD5 wouldnt have saved him here anyway
Click to expand...
Click to collapse
Never seen a rom brick a phone on any device. If it did it is something new to the S3. Usually something else done wrong in the flashing procedure. Funny if you look at them all I've seen are coming back from AOKP.

messed with bootloader

i think i messed with my bootloader.i cant acess in download mode .my firmware
Android Version:
4.1.1
Baseband Version
N7100XXALIE
Build Number
JR003C>N7100ZSALIA
since you did not provide much information,
you can go into recovery mode (if you can)
You can buy a JIG from ebay or make your own. there are tutorials about it. all you need is 1 usb cable to sacrifice and 3 100K resistors.
okay,,this phone cannot boot in download mode..as no download mode is detected.
i cant install cwm because i cant use odin to flash it..
Phone Detail
Model Number
GT-N7100
Android Version:
4.1.1
Baseband Version
N7100XXALIE
kernel version
3.031.-178067
Build Number
JR003C.N7100ZSALIA
Try to find a service center that offers a Jtag service. Last resort to get the phone working again afaik.
Moved to General Q&A as OP has a note 2 clone
gee2012 said:
Try to find a service center that offers a Jtag service. Last resort to get the phone working again afaik.
Click to expand...
Click to collapse
beside finding a service centre.anymore suggestions?
did you try recovery from firmware
Go to settings, power and turn the fastboot option off.
Then you should be able to go to bootloader using the power+vol thing
Also, you could go to developer, in settings, and enable the usb debug stuff
then try adb reboot bootloader
you can also search google for how to unlock bootloader you will get some ideas.
already tried..but stiil the same..when i get this phone.this phone is pre rooted.i cant even install cwm in it..i can only use stock recovery?
ynj said:
already tried..but stiil the same..when i get this phone.this phone is pre rooted.i cant even install cwm in it..i can only use stock recovery?
Click to expand...
Click to collapse
A note 2 clone? There's no development support so hope there's a service centre for clones.. Good luck.
If u are in stock recovery put the philz kernal+cwm match to your rom in the ext sd card and then choos the option update from the from sd card u will find philz + kernal zip select it.
It will help u I think
See the dr ketan thread of root and unroot.
Sent from my GT-N7000 using xda app-developers app
i tried all but..none work..any more suggestion?thanks for ur input.i cannot even acess download mode..which kernel would u all recommend.i cant flash it..
http://forum.xda-developers.com/showthread.php?p=18978158
Read this and u will find kernel match to your rom modem. You must remeber what modem you installed.
Sent from my GT-N7000 using xda app-developers app
---------- Post added at 03:38 PM ---------- Previous post was at 03:30 PM ----------
altanole said:
http://forum.xda-developers.com/showthread.php?p=18978158
Read this and u will find kernel match to your rom modem. You must remeber what modem you installed.
But before doing this all u must read the forum related to your problem. May be there is other good ways. Don't hesitate ask senior members by pm like dr ketan. So read before do anything wrong.
If u brick your fon then it will cost u a lot.
Regards.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda app-developers app
i tried that .and still the same.and whenever i install,it will will show install halfway and show installation aborted.and please note..that this phone is is pre rroted.so i do not know how the seller rooted for me
If its showing custom recovery and in the home menu there is not super su app then its not rooted. But if there is a super su app its rooted. And its will be a rare case. And most of the Phil'z kernal are bootloop fixed. See this.
http://forum.xda-developers.com/showthread.php?p=31310851
Sent from my GT-N7000 using xda app-developers app
okay..just found out this.
my phone is using mtk 6575 single sim phone.
anyone 1 know where i can find the recoveries?..i tried everything..and nothing seems to work..
and my phone has grren android with red exclamation mark.
Take it to a service centre which offers Jtag. That is your only chance to get it working again. Flashing kernels wont do anything if your bootloader is messed up.
Sent from my Xperia X10 using xda app-developers app
after i sent to service centre.they say cannot help unless i flash another rom with this phone..
i was thinking can i use the same recovery as mtk6575 devices?if possible please provide the links.
My phone real spec
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can not flash any ROMs if your bootloader is messed up meaning it won't load any kernels and let alone a ROM. Recoveries are parts of the kernel or the TOM but since you can't use any of those you won't be able to use a recovery. I'm sorry but seems like you've hard bricked your phone, making it as useful as a paperweight.
for the bootloader part..i did not break..it come with this intact..

Categories

Resources