to start, my phone is rooted and unlocked and ive flashed plenty of times. ive even lost my meid and restored it before but, this is different.
I downloaded slimbean rom which iv flashed before in the past and worked fine. when i flashed this time though (i always clear cach clear data) and soon at it was done i rebooted my phone and it completely turned of imediately( I had roughly 50% battery left). my computer recognizes my phone but the phones screen stays black and will not charge. It will not power on in any mode download recovery etc....
Any suggesttions guys?
Did u try battery pull?
Android 4 Life
Droopydroors said:
Did u try battery pull?
Android 4 Life
Click to expand...
Click to collapse
Or holding power down for 10-15 seconds?
Sent from my SPH-L710 using Tapatalk 2
What does or PC see the phone as? MTP, modem, adb?
barkermichaelj said:
Or holding power down for 10-15 seconds?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
ive done them both...they were my first things i tried..
I acctually think i may have downloaded a fake/corrupt rom..if it was a rom.
when i flashed it loaded extremely fast. my initial reaction was, wow this is super light weight but, it should have been a flag....i could be wrong.
billard412 said:
What does or PC see the phone as? MTP, modem, adb?
Click to expand...
Click to collapse
windows devic installation
hs-usb diagnostics 9008 (com-10)
my pc says its installed
A battery pull then volume up+home+power?
Sent from my SPH-L710 using Tapatalk 2
barkermichaelj said:
A battery pull then volume up+home+power?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
This!
or
Can you boot into Odin mode?
Something went wrong. Hate to tell you but, You're bricked.
Qhsusb_dload is what it should be but windows installed the diagnostic drivers instead. All in all, not what you want to see in device manager. its the kiss of death for our phone. Your gna need to jtag it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<<<<<-----bricked phone in device mgr
billard412 said:
Something went wrong. Hate to tell you but, You're bricked.
Qhsusb_dload is what it should be but windows installed the diagnostic drivers instead. All in all, not what you want to see in device manager. its the kiss of death for our phone. Your gna need to jtag it
<<<<<-----bricked phone in device mgr
Click to expand...
Click to collapse
. lets say i decide not to jtag it and just send my phone in for replacment through my warranty...is it void? can they tell? its free according to my warranty if the phone is "faulty". (either bad processor or something went wrong through a ota update) would that work?
whats gna and jtag?
thanks for the help!! thats all the questions i can think of lol
Sorry thats Gonna need JTAG ------>>> http://www.youtube.com/watch?v=XnA8Djs55Ds Technically yes your warranty is void. Samsung should/can see that you flashed it but you can send it to them and they will fix and send back according to other members. Appearently they arent checking/dont care. Verizon will probably replace it if you play stupid seeing as how it was "locked" and there no way you could messed with it *cough *cough. Although samsung can, Verizon cant tell in that state
Terry_blair said:
. lets say i decide not to jtag it and just send my phone in for replacment through my warranty...is it void? can they tell? its free according to my warranty if the phone is "faulty". (either bad processor or something went wrong through a ota update) would that work?
whats gna and jtag?
thanks for the help!! thats all the questions i can think of lol
Click to expand...
Click to collapse
You mean commit fraud? MD5sum. It exists for a reason. Admit your screw up and pay to have it jtaged.
Sent from my SCH-I535 using xda app-developers app
nosympathy said:
You mean commit fraud? MD5sum. It exists for a reason. Admit your screw up and pay to have it jtaged.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
^^^^Saw that coming.
why i always recomend jtag first. Then fraud only after its suggested by someone else. And i say **** it, verizon screwed people that bought it not knowing it was locked, time to screw em back
btw when was the last time you flashed a rom in recovery and it had an md5 on it? I mean lets get real here. MD5 wouldnt have saved him here anyway
You can use Android File Verify to make sure MD5 is correct. It is in the market....
Sent from my SCH-I535 using xda premium
Pull the bat wait a cpl seconds and just leave it on ur wall charger. It should come back on..
Sent from my GS3 using xda premium
---------- Post added at 07:45 PM ---------- Previous post was at 07:37 PM ----------
P2o8wer said:
Pull the bat wait a cpl seconds and just leave it on ur wall charger. It should come back on..
Sent from my GS3 using xda premium
Click to expand...
Click to collapse
Nevermind
Sent from my GS3 using xda premium
billard412 said:
^^^^Saw that coming.
why i always recomend jtag first. Then fraud only after its suggested by someone else. And i say **** it, verizon screwed people that bought it not knowing it was locked, time to screw em back
btw when was the last time you flashed a rom in recovery and it had an md5 on it? I mean lets get real here. MD5 wouldnt have saved him here anyway
Click to expand...
Click to collapse
Never seen a rom brick a phone on any device. If it did it is something new to the S3. Usually something else done wrong in the flashing procedure. Funny if you look at them all I've seen are coming back from AOKP.
Related
I brought this phone last year and it turns to show me this picture
RST_STAT =0x1
PWIC_IRQ1 =0x0
PWIC_IRQ2 =0x0
PWIC_IRQ3 =0x0
PWIC_IRQ4 =0x0
PWIC_STATUS1=0x00
PWIC_STATUS2=0x0
What should I do?
Can I repair it?
Please help.
Try a Jig to get it in Download mode and then Odin/Heimdall a Stock Rom.
If u r on a pc, check out my signature below for some links...
Sent by XDA Premium App
I tried and no result
what I do wrong?
Looks like kernel panic. If your PC doesn't recognize your phone prior to using Odin to get back to stock, take the battery out for a few minutes and try again or use heimdall
Sent from my SGH-I897 using XDA
clipocel said:
I tried and no result
what I do wrong?
Click to expand...
Click to collapse
What specific result did u get...?
Sent by XDA Premium App
I must buy 3 100k resistors NEW because I make the jig but when I measure it it has 291 k
so i must go to my shop to buy the real ones
I will be back tomorrow with an answer
thx again guys
I think 291k should be enough resistance. I remember watching a video of someone using about 291k. But I could be mistaken. Please anyone correct me if I am wrong.
Sent from my Serendipity VII flashed Captivate using xda premium
hello again
i buyed all pieces I build the jig but still nothing
i tried also with a variable resistor of 500k and set it up to 300k, 301k, 291k but still nothing
Can you light me much further?
pls
thx
yaiiiiiiiiiiiiiiiiiiiiiii
I got the Downloading screen
now what tipe of soft I need to download and install and HOW?
Please help
291k with the variable resistor IS THE WINNER
TRUST it
I will put a picture when i make 8 posts
clipocel said:
yaiiiiiiiiiiiiiiiiiiiiiii
I got the Downloading screen
now what tipe of soft I need to download and install and HOW?
Click to expand...
Click to collapse
1. Go here and download a stock rom to install on your captivate.
http://forum.xda-developers.com/showthread.php?t=1300843
Instructions on how to do that are on this page. I suggest going for 2.3.5 gingerbread I897UCKJ3...with bootloaders, then flash the kernel with CWM which is what you use to install other roms.
2. If you are not happy with Gingerbread, and want to get ICS or other custom roms, go here and read up on how to install a new rom over stock.
http://forum.xda-developers.com/showthread.php?t=1350266
Actually, do read up on both stickies to have a better idea of the flashing process. I didn't know a damn thing about flashing 3 weeks ago, and now I've been flashing roms, kernels and modems without any problems. Just make sure to read everything carefully before doing anything. As for which rom is best...well, that's up to you to try and pick out which one is best for you.
Good luck.
hello
After several days under the 4-2ndtwin wing I resolve the problem with my phone.
Thank you very much 4-2ndtwin , you are a very professional man.
291k JIG is the winner in my case, I used I897UCJF6-final-OCD-REV0 and now all is working fine.
Network signal sometimes is very low and it lose signal. Some1 knows wich may be the problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my JIG, my winner
Damn Bricks!
Bricked my phone a few times and fixed it OK until i ran into the "ICS RESET PHONE" bug
Now the only way to fix is by tricking the phone into thinking the external sd card is the inernal sdcard....ADB SDK AVD...three big acronyms for IM SCREWED!
Or am I?
Found some people over at mobiletechvideos to apply the Unbrickable MOD created by Adam Outler (Genius of sorts).
Also they can provide someting called JTAG for very reasonable prices... that is unless you know you can fix it yourself. Which unfortunately I cant right now
or I would just because I know its possible, just not for me..right now.
I think its really sad that the only software to really screw up my phone ICS
was my favorite of all. I hope all is fixed when I get my Unbrickable phone back I CANT WAIT!!!!!!!!!
clipocel said:
hello
After several days under the 4-2ndtwin wing I resolve the problem with my phone.
Thank you very much 4-2ndtwin , you are a very professional man.
291k JIG is the winner in my case, I used I897UCJF6-final-OCD-REV0 and now all is working fine.
Network signal sometimes is very low and it lose signal. Some1 knows wich may be the problem?
Click to expand...
Click to collapse
U could try flashin a newer modem.
I897ucKK4 of course is the latest for captivate.
Sent from my SAMSUNG-SGH-I777 using xda premium
this version of modem I already use it
I have a question : Can I put i9000 rom and stuff?
I know better how to deal with this version.
thx
Yep...as long as u use the ones in the captivate development forum because they have been ported and/or dev'd to work for the cappy--(reoriented kernels, etc, etc.)
Sent from my SAMSUNG-SGH-I777 using xda premium
is anything to tknow before I will try to put i9000 rom on my captivate?
Just read and read and read and be sure that u understand and know what u are doin, as well as the risks and rewards involved. And hit the Dev's thanks button for 'em. They put a lot of time and work in.
Sent from my SAMSUNG-SGH-I777 using xda premium
I think I did something wrong
help
U r soft bricked.
U need a Jig to get ur phone in download mode and then u can flash a Stock Firmware through Odin or Heimdall to get ur phone going again.
If u r on a pc, look in my signature link below. There are links there on how to make a jig or where to buy one.
--U can try to see if ur pc recognizes that screen as an alternate download mode 1st though, because some here have stated that they were able to do that with that screen.--
Sent from my SAMSUNG-SGH-I897 using xda premium
when i put my jig into phone it is show me the same picture.
what is wrong?
-----------------------------------
FOR ODEXED AT&T ICS ONLY - Please install whirleyes BootMenu app from the Play Store and make a nandroid backup before modifying system files.
-----------------------------------
Well, here we go... Let the fun begin again!
I just put together this quick mod because I personally can't stand having AT&T tattooed all over my phone. And now with ICS it's in more places!
FOR STOCK ODEXDED AT&T ICS ONLY! (so far)
This zip will remove the AT&T carrier text from the status bar, pull-down shade, and lockscreen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Download ICS_ATT_Remove_Carrier_ODEXED.zip to your sdcard
-Boot into recovery
-Wipe dalvik and cache partition
-Install zip from sdcard
If you want to do it yourself, see here for which xmls to edit (I made that lonely post after doing this for my friend's RAZR).
Oooooooooooo TOYS ALREADY Altered? I love thee so.... wanna be the first guinea pig...
That's the first thing I stared when I got up this morning. You saved me a lot of time. Once I'm charged again I'll give it a try. Thanks.
Sent from my MB865 using Tapatalk 2
Odexed only. Should put that in OP
Sent from my MB865 using xda premium
rdavisct said:
Odexed only. Should put that in OP
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Right. I thought about that last night. But, so far that's all there is... unless you got something up your sleeve...
I'm gonna PM you about something...
alteredlikeness said:
Right. I thought about that last night. But, so far that's all there is... unless you got something up your sleeve...
I'm gonna PM you about something...
Click to expand...
Click to collapse
Of course i do ;-)
Sent from my MB865 using xda premium
Will this also hide it when the carrier logo changes, like when roaming. I live near the border, so that is important to me.
lkrasner said:
Will this also hide it when the carrier logo changes, like when roaming. I live near the border, so that is important to me.
Click to expand...
Click to collapse
Im sure it hides all of them, but could be wrong.
lkrasner said:
Will this also hide it when the carrier logo changes, like when roaming. I live near the border, so that is important to me.
Click to expand...
Click to collapse
Yes. I think JRW is right. Looks like the "emergency calls only" message is hidden in the lockscreen too...
Not sure of another way around that yet.
The files I edited are listed in the link at the bottom of the op if anyone wants to try a different method...
Sent from my MB865 using xda app-developers app
Altered, is this zip flashed through STOCK recovery? Or via bootstrap and CWM (which I heard are working, but I haven't tried, because ICS is booting up on my phone for the first time............. now. WOO!)
Fall of Enosis said:
Altered, is this zip flashed through STOCK recovery? Or via bootstrap and CWM (which I heard are working, but I haven't tried, because ICS is booting up on my phone for the first time............. now. WOO!)
Click to expand...
Click to collapse
Yea, don't rush it man... It is installed through bootstrap and CWM recovery, which are both working fine. I do not think that there are any known working Recovery on Boot methods for us at the time. Also, would be excellent to find a way to install other zips through stock recovery... I think that's being looked into (at least I know I will look into it)... So, please be very careful.. But, the mod zip works fine... in theory.
Related side note, I just finished porting the 1% battery to ICS (my first attempt, so.. who knows), but I do not want to even try to test it until I know I can get myself out of trouble easily...
Meh, I got time on my hands. I'll give it a whirl. We can luckily FXZ back to 2.3.5 if something goes belly up
waiting
alteredlikeness said:
Related side note, I just finished porting the 1% battery to ICS (my first attempt, so.. who knows), but I do not want to even try to test it until I know I can get myself out of trouble easily...
Click to expand...
Click to collapse
I'm desperately waiting for that "altered"
hate using any xtra things which eats up the notification space
hope u succeed asap :fingers-crossed:
Done. Nice work altered! Can't wait to see what you do with ICS!
Currently running apex launcher. Should definitely try...
Sent from my MB865 using xda premium
I went the long route just to get familiar with it all. I f'ed it up a bit but got it to work. I still have all those rainbow Google pngs from the miui threads in my x10 days. I'll put those in in the a.m. I miss a super flash happy phone like the x10. Can't wait for the sg.
Sent from my MB865 using Tapatalk 2
How do you can to take screenshot with ics command? I can't do it i press hold volume down and power button but don't work
It works man. You just have to hit the buttons at exactly the same time. It is kinda finicky.
Sent from my MB865 using xda premium
I got another mod for stock odexed leaked ics if I can get a tester first... anybody feeling risky with the new bootmenu app? Interested persons, please PM me..
Sent from my phone's mind
EDIT: Thank you, Fall!
Late to the party. Just wanted to say thanks. Removed carrier branding on my ATT Atrix 2 ics 4.04 using BMM. Oh it removed the branding AIRVOICE WIRELESS which is my MVNO.
Yep, a necessity for AV which takes up half of the bar and knocks other notifications off!
Got a 62MB update today. Broke root but OTARootkeeper restored Root Explorer but TU giving issues. Perhaps paving the way for 4.1! One can only hope.
What version? LHE?
LLStarks said:
What version? LHE?
Click to expand...
Click to collapse
Has to be . HE is 62 mb
Sent from my SCH-I535 using xda app-developers app
ive still havent received the HE update and its been about a week now....WTF
It gets to different parts of the country at different times. Not all at once
Sent from my SCH-I535 using Tapatalk 2
hopesrequiem said:
It gets to different parts of the country at different times. Not all at once
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Wifes phone go it on the 17 of oct while i was sitting next to her.....
I got it too...i woke up this morning and the phone had just finished updating. I wonder what it was for. I think my battery is draining a little faster now but im not sure.
Heres screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not sure if anything changed...
Sent from my SCH-I535 using xda app-developers app
Phone is definitly running a little hotter than before...iono what they did but my batt draining quicker. If anyone figures out what
Sent from my SCH-I535 using xda app-developers app
Who knows. If it doesnt settle down after a day or two just revert back to one of the other builds.
skeeterpro said:
Got a 62MB update today. Broke root but OTARootkeeper restored Root Explorer but TU giving issues. Perhaps paving the way for 4.1! One can only hope.
Click to expand...
Click to collapse
4.2 will be out by the time we get 4.1
Wife's phone got the HE update but there is still the sim card issue. Wasn't that supposed to be fixed 2 or 3 updates ago?
rfranken said:
Wife's phone got the HE update but there is still the sim card issue. Wasn't that supposed to be fixed 2 or 3 updates ago?
Click to expand...
Click to collapse
suppose to yes... but it didnt fix it
Just got the error today. Hasnt happended in a week atleast so thought i was doing good.
LLStarks said:
What version? LHE?
Click to expand...
Click to collapse
Yep. LHE
No heat issues, battery seems the same.
Can someone help me out?
Today the update showed up but upon hitting "YES" to update the phone booted into Clockwork Mod Recovery v5.8.4.5 and it says that the signature verification failed and it has me reboot to a "your update has failed" message. I have looked in my advanced section of CMR but there isn't anything there to disable signatures.
Any ideas? thanks!
solidage said:
Can someone help me out?
Today the update showed up but upon hitting "YES" to update the phone booted into Clockwork Mod Recovery v5.8.4.5 and it says that the signature verification failed and it has me reboot to a "your update has failed" message. I have looked in my advanced section of CMR but there isn't anything there to disable signatures.
Any ideas? thanks!
Click to expand...
Click to collapse
You can't install it with CWM. You would have to revert to the stock recovery.
Stop System upgrade
blueis300 said:
Just got the error today. Hasnt happended in a week atleast so thought i was doing good.
Click to expand...
Click to collapse
Does anyone know how to block it? I bought my used S3 rooted and have done a lot of customization that I don't want to lose. On my previous phone there were a few programs that I had to freeze (using Titanium Pro). Can someone tell if that can also be done on the S3? And is there a way to delete the file to free up the 50MB?
Thanks!
Frank
Michigan
FMinMI said:
Does anyone know how to block it? I bought my used S3 rooted and have done a lot of customization that I don't want to lose. On my previous phone there were a few programs that I had to freeze (using Titanium Pro). Can someone tell if that can also be done on the S3? And is there a way to delete the file to free up the 50MB?
Thanks!
Frank
Michigan
Click to expand...
Click to collapse
Freeze SDM & FWUPGRADE.Worked 4 me.Or u can get OTA Blocker.
Sent from my SCH-I535 using xda premium
igloohed73 said:
Freeze SDM & FWUPGRADE.Worked 4 me.Or u can get OTA Blocker.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks. Froze them... Did you see a post as to what this upgrade did? i got the impression it was not the JB update....
Also, does anyone know where the file that was downloaded is stored? I'd like to delete it.
Frank
FMinMI said:
Thanks. Froze them... Did you see a post as to what this upgrade did? i got the impression it was not the JB update....
Also, does anyone know where the file that was downloaded is stored? I'd like to delete it.
Frank
Click to expand...
Click to collapse
It's not JB, should be on your internal SD card.Dont forget the thanks button
Sent from my SCH-I535 using xda premium
Hi, i 've a S2 i727 rogers version, i install rom cm10 and lost my softkeys , i install again stock rom and nothing, try this way ( http://forum.xda-developers.com/showthread.php?p=25555442#post25555442 ) and nothing too, anyone can help?
That's the wrong forum for your phone
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
That's the wrong forum for your phone
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
why?
shtspk said:
why?
Click to expand...
Click to collapse
Those phones are completely different I doubt any fixes yiu do from thta forum will fix it
Try to a odin restore to stock not juat a rom flash... and hopefully you download the correct CM rom
shtspk said:
Hi, i 've a S2 i727 rogers version, i install rom cm10 and lost my softkeys , i install again stock rom and nothing, try this way ( http://forum.xda-developers.com/showthread.php?p=25555442#post25555442 ) and nothing too, anyone can help?
Click to expand...
Click to collapse
It is indeed a different model, i9120 and i727 are different phones. So for future reference your phone isn't Galaxy S II LTE in the international sense of the internet.
When searching for info for our phone these are the keywords to look for "SGH-i727 / SGH-i727r / i727 / i727r / Skyrocket". Any of those are correct.
This forum is the correct one. All the roms here should work as advertised.
I mean seriously, you might as well download a rom for motorola razr v3i and then ask why you're phone is bricked.
To avoid further confusion on your part read all the stickies in this forum and all of the sections, if you don't want to throw away your phone and if you want to learn how to do things that work.
CyanogenMod 10 for the Skyrocket is found here (<--link).
Good luck fine sir I wish you all the best.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I install the right rom at the first time, try every ways and still without keys
Sent from my SAMSUNG-SGH-I727 using xda premium
shtspk said:
I install the right rom at the first time, try every ways and still without keys
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Odin back to stock. You probably mucked it up with the wrong roms. And if you don't know how to do that you shouldn't be flashing anything.
God promised men that he'd put beautiful women in all corners of the world. Then he laughed and laughed and made the world round
Like i said at the first time i install the right cm10 to skyrocket, but the keys dont work, i try to install the new 4.1.2 official rom of rogers, the lights of soft keys turn on, but still not working..
shtspk said:
Like i said at the first time i install the right cm10 to skyrocket, but the keys dont work, i try to install the new 4.1.2 official rom of rogers, the lights of soft keys turn on, but still not working..
Click to expand...
Click to collapse
Try going to Recovery and wipe davlik and Factory Reset.
Or
In the meanwhile you should try this app:
http://forum.xda-developers.com/showthread.php?t=1330150
Sent from my SAMSUNG-SGH-I727 using xda premium
I have LMT installed but i really want softkeys back
Sent from my SAMSUNG-SGH-I727 using xda premium
shtspk said:
I have LMT installed but i really want softkeys back
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Wtf........
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
shtspk said:
I have LMT installed but i really want softkeys back
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Are you literate?
Sent from my mom's basement.
Can you define what you mean by "lost my soft keys" .... ?
Are the haptic buttons on your phone not working or are you talking about having true soft keys, as in part of the UI?
car vs driver said:
Can you define what you mean by "lost my soft keys" .... ?
Are the haptic buttons on your phone not working or are you talking about having true soft keys, as in part of the UI?
Click to expand...
Click to collapse
I believe he's talking haptic-one of his posts mentions the lights coming on but the buttons not functioning.
mrfeuss said:
I believe he's talking haptic-one of his posts mentions the lights coming on but the buttons not functioning.
Click to expand...
Click to collapse
Gotcha ...
Then my advice would be that if you lost the ability to use those buttons because of a specific ROM, you'll need to post that feedback into the appropriate ROM thread for assistance.
car vs driver said:
Gotcha ...
Then my advice would be that if you lost the ability to use those buttons because of a specific ROM, you'll need to post that feedback into the appropriate ROM thread for assistance.
Click to expand...
Click to collapse
He flashed an 19210 ROM on his skyrocket.
Sent from my mom's basement.
For the record it sounds like he got lucky and didn't brick, but DID corrupt his efs. Flash my fix (method 3) from my corrupt efs sticky in the general section and u should be right as rain
hello sir... i was rooting my ultra maxx by a method with blbroke.bat. but after that i try to root.bat its take about 2 hours but not happen with my ultra maxx ... no recovery no fast boot no bootloader... sometime bling a green light near sencer... i dont know what can i do now.... its on 6-7 kk... i try alot method but still 0% success... help me thanks
Well unfortunately you're out of luck in this situation. What I recommend is to see if you have a warranty then you can send your phone and get the new one, just don't tell the carrier it was your fault just tell them you left it charge and its broken now. Good luck
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sinmaker69 said:
Well unfortunately you're out of luck in this situation. What I recommend is to see if you have a warranty then you can send your phone and get the new one, just don't tell the carrier it was your fault just tell them you left it charge and its broken now. Good luck
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
thanks for reply ..... any other idea....
majjo1990 said:
thanks for reply ..... any other idea....
Click to expand...
Click to collapse
Try searching for forums with similar problems I believe it's call debricking or something because androids are similar so if someone have fixed it then it will probably work for you too
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sinmaker69 said:
Try searching for forums with similar problems I believe it's call debricking or something because androids are similar so if someone have fixed it then it will probably work for you too
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
okay sir thanks.... i am waiting may be someone help ....
u didn t charge the phone enough to have all the tim to make upload the system to phone.
if u upload the bootloader file,u can restore to stock firmware.
try it
danger2u said:
u didn t charge the phone enough to have all the tim to make upload the system to phone.
if u upload the bootloader file,u can restore to stock firmware.
try it
Click to expand...
Click to collapse
how i can charge even its tottly died.....
majjo1990 said:
how i can charge even its tottly died.....
Click to expand...
Click to collapse
need a fastboot adapter
i will provide u a link soon
Inviato dal mio XT1080 utilizzando Tapatalk
danger2u said:
need a fastboot adapter
i will provide u a link soon
Inviato dal mio XT1080 utilizzando Tapatalk
Click to expand...
Click to collapse
thank you so much i m waiting.....
Hi friend
Hi, I'm using Google translator, so forgive errors.
I do not know if you know a little Spanish (help me more) I'm from Mexico, Mexicali Baja Califoria, to be exact.
I have a Droid Mini XT1030 and I had the same problem trying to give you root the phone. But I need the details to help you better. Send me a message with your detailed problem (The tutorial you were following the model of the mobile version of android, stuff) also steps you followed. I hope to be helpful.
today i try many methods.... now its give me a very small breath ... like 5 to 10 seconds... i see some messages like:
failed to hab check for gpt_mainx4e
cid read failure
invaild cid status 0x69
customer id error. contect dealer: oxdead
fastboot reason invalid cid.
In the zip file for the CrashXXL blbroke method, there is a batch file called Run_SBL.bat ... This should pull your phone out of Qualcomm mode. If you reboot and see the "M" logo you'll be able to get back into fastboot and reflash. As someone mentioned before, you'll need a factory cable if your battery is dead.
DmdStar said:
In the zip file for the CrashXXL blbroke method, there is a batch file called Run_SBL.bat ... This should pull your phone out of Qualcomm mode. If you reboot and see the "M" logo you'll be able to get back into fastboot and reflash. As someone mentioned before, you'll need a factory cable if your battery is dead.
Click to expand...
Click to collapse
sir what you mean of factory cable???
majjo1990 said:
sir what you mean of factory cable???
Click to expand...
Click to collapse
I explained it earlier in the the thread. You can also google Motorola factory cable for info. I bought mine from Amazon.
Sent from my XT1080 using Tapatalk
DmdStar said:
I explained it earlier in the the thread. You can also google Motorola factory cable for info. I bought mine from Amazon.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
...is needed to short in cable VCC to ID (host). Thats all
Or you can remove battery and connect to battery pins 3.7V from external power supply.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CornholioGSM said:
...is needed to short in cable Ground to ID (host). Thats all
Or you can remove battery and connect to battery pins 3.7V from external power supply.
Click to expand...
Click to collapse
This phone doesn't have removable battery. Factory cable would be way easier.
Sent from my XT1080 using Tapatalk
DmdStar said:
This phone doesn't have removable battery. Factory cable would be way easier.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
...all phones have removable batteries
CornholioGSM said:
...all phones have removable batteries
Click to expand...
Click to collapse
Lol... I'm not fielding those questions.
Sent from my XT1080 using Tapatalk
use this file.
Unbrick_SU6-7
solve your problem 100%.
http://s3.picofile.com/file/82044228...SU6_7.rar.html
http://uploadboy.com/mkelk9txjjkz.html
jalal-jap said:
use this file.
Unbrick_SU6-7
solve your problem 100%.
http://s3.picofile.com/file/82044228...SU6_7.rar.html
http://uploadboy.com/mkelk9txjjkz.html
Click to expand...
Click to collapse
sorry sir file is not downloading by this website.... any solution...