[Q] Data does not connect on Airvoice - HTC One X - AT&T, Rogers HTC One X, Telstra One XL

I just bought a used HTC One X. I factory reset the phone. I signed up to Airvoice Wireless plan and bought a sim card off ebay. I cut the sim to micro sim. Now the phone works.
However, the data will not connect no matter what. Next to mobile network, it says disconnected. I have set the APNs as listed at unlockit.co.nz and I also called AV cs and was on the phone for half an hour - they tried everything, including another factory reset. No luck.
On the top bar it has an "E" but will not connect to 3G.
Has anybody used this plan or another?
Is it android, the htc phone, the sim card, or am I missing something obvious?
The phone is on Android 4.0.4 and is AT&T locked.
APN details:
Name: Mobile Web
APN: att.mvno
Proxy: 66.209.11.33
Port 80
APN Type: default
MMS:
MMSC: mmsc.cingular.co`m
APN Type: mms
proxy and port are the same.

Make sure the apn you put in is selected. It should have a green circle beside it when it's selected.
Sent from my One X using xda app-developers app

exad said:
Make sure the apn you put in is selected. It should have a green circle beside it when it's selected.
Click to expand...
Click to collapse
Yeah. I got that. Still nothing.

Then your apn settings must be wrong.
*edit* I did some research for you. Seems the apn settings on their website are outdated which looks the same as you have. Call them or visit for the correct settings.
Sent from my One X using xda app-developers app

exad said:
Then your apn settings must be wrong.
*edit* I did some research for you. Seems the apn settings on their website are outdated which looks the same as you have. Call them or visit for the correct settings.
Click to expand...
Click to collapse
Well, now the data works slow. But I still don't see "3G" on the status bar. It always says "E"
Also, there is no option to turn 3G on or off, under Mobile Network, in Settings.
Yes, I called Airvoice and was on the phone for 30min+ and got all the apn settings from them. I guess they're correct but why it didn't work then, but now it suddenly works, I don't know. Beats me.

They may have reset your phone on their network
Sent from my One X using xda app-developers app

Related

[APN SETTING][UPDATED 7.31.11] Potential Speed Increase For Most ROMs|Supported By OP

Edit: Updated 7.31.2011 to include new "hipri" APN type, and a totally new procedure to prevent APN selection problems.
Just a quick note: the discussions in posts 2 through 169 of this thread are now deprecated, as the original post was totally different at that time. Posts 170 and onward are relevant to this heavily revised original post. So any procedures/workarounds in posts 2 - 169 should be ignored or taken with a grain of salt.
BACKGROUND
The stock Inspire ROM contains 2 APNs (Access Point Names) in the mobile network configuration. One is for data, and one is for MMS. Almost all of the custom Inspire/DHD ROMs on this forum only have 1 APN, where data and MMS are combined. This single APN is sufficient to obtain maximum data speeds in some markets, however in many markets such as mine, your phone needs to be running a dual APN configuration similar to the stock ROM to obtain maximum speeds.
As always, before making any major config changes be sure to fully backup your ROM. If you mess up real bad or something goes unexpectedly wrong, then you might permanently lose your connection with no recourse other than a complete restore.
These changes are for the United States AT&T network only.
FIRST, DETERMINE IF YOUR ROM HAS A LOCKED OR UNLOCKED APN CONFIGURATION
From your home screen, press the Menu button --> Settings --> Wireless and networks --> Mobile networks --> Access Point Names. If you see a lock symbol on your APN, then you'll need to jump down the locked APN procedure further down this post. For everyone else with an unlocked APN configuration, procedure is immediately as follows.
PROCEDURE FOR ALL ROMS THAT HAVE UNLOCKED APNs:
Step 1. Delete all APNs
If you're not already at your APN screen, then from your home screen press Menu button --> Settings --> Wireless and networks --> Mobile networks --> Access Point Names
Press the left side of your 1st APN to go into the settings of this APN, then press Menu>>Delete APN.
Repeat this process for any other APNs you have. The goal is to delete all APNs so we can start from scratch.
Now do the next steps in the same order as below:
Step 2. Create a new APN (Menu>>New APN). Everything is case sensitive and must be entered exactly as below. This will be your 1st APN:
Name: MEdia Net
APN: Phone
MMS protocol (if applicable): WAP 2.0
MCC: (don't change this number)
MNC: (don't change this number)
APN type: default,admin,hipri (notice there is no space on either side of the commas)
APN protocol (if applicable): IPv4
everything else: <Not set>
Press Menu>>Save. You will now be back at the initial APN screen.
Step 3. Create another APN (Menu>>New APN). Everything is case sensitive and must be entered exactly as below. This will be your 2nd APN:
Name: MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol (if applicable): WAP 2.0
MCC: (don't change this number)
MNC: (don't change this number)
APN type: mms,supl (notice there is no space on either side of the comma)
APN protocol: IPv4
APN protocol (if applicable): IPv4
everything else: <Not set>
Press Menu>>Save.
You will now be back at the initial APN screen again. Make sure the 1st APN (named MEdia Net) is selected (via the round radio button on the right side). Your data connection will drop for several seconds and then come back.
We're done. If something went wrong and you need to revert back to your default APN config, from the APN selection screen just press menu and select "Reset to default". Or worst case scenario, simply restore your nandroid backup.
Proceed to TESTING section below.
PROCEDURE FOR ROMS WITH A SINGLE LOCKED APN:
If your APN is locked (it shows the lock symbol and you cannot change the settings), then we're just going to add a second one.
From the APN screen, press Menu>>New APN. Here are the settings for your 2nd APN. Everything is case sensitive and must be entered exactly as below.
Name: Media Net or Media Net 2 (if your 1st locked APN is named Media Net, then just name this one Media Net 2 - the name in this field isn't important; it just needs to be unique)
APN: Phone
MMS protocol: WAP 2.0 (this option might not be in your APN, so don't worry if you don't see it)
MCC: xxx (Don't change this number)
MNC: xxx (Don't change this number)
APN type: default,admin,hipri (notice there are no spaces between the words and the commas)
APN protocol (if applicable): IPv4
Everything else: <Not set>
Once you have the above settings entered, press menu and save. You will exit back out to the APN selection screen. Now you need to select the little round button for the new APN (Media Net/Phone) that you just created. Your phone's data connection will drop for several seconds as it switches to the new APN, and then come back. If you find that your connection doesn't "stick" on the 2nd APN (i.e. the selection button keeps reverting back to the 1st APN) then reboot your phone and try selecting the 2nd APN again. It is mandatory that the 2nd APN is selected to receive the speed benefit.
We're done. If something went wrong and you need to revert back to your default APN config, from the APN selection screen just press menu and select "Reset to default". Or worst case scenario, simply restore your nandroid backup.
Proceed to TESTING section immediately below.
TESTING
If you're in one of the markets that benefits from the 2nd APN, you will see an increase in download and upload speeds in a speed testing app. Also, uploads will not pause and stutter nearly as much anymore. If for some reason you notice your speeds are slower, this is likely due to the normal wide variance in AT&T network speeds, so keep testing. This APN fix is not known to slow down your speeds; they will either be the same or faster. If your average speeds are roughly the same, then your market is one of those that doesn't benefit from the dual APN configuration. For testing your speeds, I recommend the free Speedtest.net app (found in the Market). It allows you to choose from a wide variety of server locations to test against. Be sure to run multiple speed tests from different locations to different servers at different times of the day before jumping to any conclusions. With my phone sitting in the exact same spot I've seen speeds vary from 500k to 5MB/s in a 10 minute period, so keep in mind there can be a wide variance in AT&T network speeds and cellular conditions can change frequently and rapidly.
At this point, there are a few build.prop settings that might enhance your speeds even more, but that is beyond the scope of this thread.
Good luck and let us know your results. If you have any problems, post a message in this thread and I'll try to help you.
I'll give it a try. worth a shot.
After flashing a radio, speeds were awful. Re-flashed the rom from my backup and it fixed the problem.
Would this work with cm7
HTC Inspire on CM7. Beast ROM. If I helped Thank me
harlenm said:
After flashing a radio, speeds were awful. Re-flashed the rom from my backup and it fixed the problem.
Click to expand...
Click to collapse
Back when I was trying to find the root cause of the problem, your method did not work for me. Unless you're referring to the stock ROM, for which I've never had any speed issues with any version of radio that I tried.
XAviierG said:
Would this work with cm7
HTC Inspire on CM7. Beast ROM. If I helped Thank me
Click to expand...
Click to collapse
Absolutely. My goal was specifically to get CM7's cell data speeds as fast as the stock ROM. This fix also worked for me in CoreDroid as well.
For some reason this didn't work for me. Swapping the telephone db caused the phone to fc. Even after restoring the original file the fc persisted. I had to flash my backup. I didn't change the build prop settings.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
lrs421 said:
For some reason this didn't work for me. Swapping the telephone db caused the phone to fc. Even after restoring the original file the fc persisted. I had to flash my backup. I didn't change the build prop settings.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
Click to expand...
Click to collapse
Thanks for the reply. I added a warning to the original post to make sure to do a nandroid backup. What ROM are you using?
henrybravo said:
Thanks for the reply. What ROM are you using?
Click to expand...
Click to collapse
Would've been nice if I would've stated that I'm running CM7.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
lrs421 said:
Would've been nice if I would've stated that I'm running CM7.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
Click to expand...
Click to collapse
No worries. I'm going to re-test this procedure once again.
Worked perfect for me on Lee Droid 2.2.3
maddiedad2009 said:
Worked perfect for me on Lee Droid 2.2.3
Click to expand...
Click to collapse
Any difference data speed for you? I wonder why I got a fc on Cm7. Weird.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
maddiedad2009 said:
Worked perfect for me on Lee Droid 2.2.3
Click to expand...
Click to collapse
That is good news, thanks!
FC's on RCMix5.9.3. Had to nandroid back.
Sent from my Desire HD using XDA Premium App
id10terrordfw said:
FC's on RCMix5.9.3. Had to nandroid back.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Good to know, sorry for the trouble. I added another warning to the OP that it's working for some but not others.
id10terrordfw said:
FC's on RCMix5.9.3. Had to nandroid back.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Ok, so I'm not alone. Did you do root explorer or adb? I used root explorer.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
I had FC. To get rid of it I went to ROM manager and ran fix partitions and rebooted it and that seemed to work. Try and keep me posted.
HTC Inspire on CM7. Beast ROM. If I helped Thank me
I just wiped and reflashed with CM7-stable, used the Root Explorer method and all is good...got a big time increase in download speeds, no FC's. So it's looking like this fix will not work for everyone. I searched the entire xda forum, and there's not much discussion of people messing around with different copies of the telephony.db file, so we are definitely treading on new ground here.
XAviierG said:
I had FC. To get rid of it I went to ROM manager and ran fix partitions and rebooted it and that seemed to work. Try and keep me posted.
Click to expand...
Click to collapse
Just curious, are you seeing an increase in cell data speeds?
Regarding the FC's, I'm wondering if for some people the file permission needs to be reset once it is copied.
Thanks!
A bit new to the Android dev community but quickly becoming a big fan of it. Rooted my 2nd Android phone ever just this past weekend without much trouble at all. Again thanks to the fantastic dev community.
I even managed to pull off what you described here in your post...yes yes...even adb is sort of new to me.
But alas, it worked! My data speeds are noticeably faster now Running on Android Revolution HD 4.0 by the way.

Mytouch 4G, will not connect to tmobile network

Ive got an mytouch 4g will not connect to any network, the person I got it from had it rooted to 2.3.3 but did not install the new radio, I installed the GB radio but it still wont connect, any ideas???
astang99 said:
Ive got an mytouch 4g will not connect to any network, the person I got it from had it rooted to 2.3.3 but did not install the new radio, I installed the GB radio but it still wont connect, any ideas???
Click to expand...
Click to collapse
Bad SIM card.
no, tried 3 different sim cards, all the same response, 2 different mytouch 4G's with the same problem, only says limited service
I had a very odd issue similar to this after trying some different roms and then using CWM to restore my RG rom...
In short, I was only able to get service via wifi calling and while in my 'home' area. As soon as i left my home, I would loose all service while others maintained service just fine. If i didn't know any better, it would seem that my phone was locked to a specific tower.
It took a factory reset on the rom before I could get any service back while outside of my home market.
that almost sounds like the same issue, I can get wifi with no problem, just will not let me get service any other way, when I try to select tmobile from network selection it says your sim card will not let you get service
shot in the dark, but... did you check your apn settings???
how do I check apn settings?
astang99 said:
that almost sounds like the same issue, I can get wifi with no problem, just will not let me get service any other way, when I try to select tmobile from network selection it says your sim card will not let you get service
Click to expand...
Click to collapse
I would grab a fresh rom, factory reset the device, flash the rom and reflash the radio. At this point, if you don't do so regularly, MD5 check what you download to ensure its as it should be.
If we go with the 'locked to a tower' assumption, when this happened to me, it appeared 'locked' to the tower it first connected to upon reboot. If you are not in that area now, it prob wouldn't connect.
Also, i have had nothing but problems when I attempted to apply the APN settings listed in forum posts. Just default them, see if it helps..
Settings> Wireless & Network> Mobile Networks> APN Settings > menu button, reset to default. But i think this only affects mms, internet and not the connection to the mobile network itself.
**edit**
I also received an error when attempting to manually connect or search to a mobile network.
factory reset, from cwm?
Yes. Once completed, i went ahead and reflashed the rom while still in CWM.
any other ideas if this doesnt work?
lol, brick it and call tmobile.. "its stuck in a bootloop"
another thought is to call tmobile and ask them essentially if they can reset your device in the towers. I worked for them (voicestream) like 12 years ago, the lingo has most likely changed but there maybe something in the system that is causing the problem..
I was able to see the problem go away once i factory reset, so I didn't bother. Just don't mention anything that could be noted as 'warranty voided'..
Typically, when I call, i give them just enough information to get them to do exactly what I want. They shouldn't care that you run a custom rom and they don't need to know.. just the fact that you cannot connect to the network should be information enough.
T-Mobile US APN Settings: (By Elvis_Freshly)
Click on Menu
Click on Settings
Click on Wireless & networks
Click on Mobile networks
Click on Access Point Network
You will see a tab with Some provider settings,if rooted device with custom ROM.
Ignore it for now.
Click on Menu
Select New APN from popup menu.
You will see a window come up with a bunch of tabs.
Clcik on name and Name the connection as T-Mobile USA
Click on APN and enter epc.tmobile.com
Click on Proxy and enter 216.155.165.50
Click on Port and enter 8080
Username will show as (leave it alone do not touch)
Password will show as (leave it alone do not touch)
Server will show as (leave it alone do not touch)
Click on MMSC and type in http://mms.msg.eng.t-mobile.com/mms/wapenc
Click on MMS proxy and type 216.155.165.50
Click on MMS port and type 8080
MMS Protocol should be WAP 2.0 if not then click on tab and select WAP 2.0
MCC should be set to 310 if not click on tab and set it to 310
MNC should be set to 260 if not clcik on it and set to 260
Click on Authentication type and select None
Click on APN type and enter default,supl,mms
And then Click on menu and save it.
Now you go back and you will see a T-Mobile US Apn that we just created.
Select that and a red circle should appear next to the Tab.
Now press back twice to go to Wireless & Networks screen
Uncheck Mobile network tab and wait for a few secs;
Check the Mobile networks tab again;
Now reset your phone and enjoy T-Mobile data, MMS and SMS
Click to expand...
Click to collapse
Sorry about the copy and paste but this seemed to be the one exception to the case, I would take a little time to look threw some of the rom settings. If this doesn't work send the phone back, it seems to me that's the last thing you want to do but if this doesn't work then you may have no choice but to and why waste more time.
i doubt this issue has anything to do with the apn settings as those only affect T-Mobile data, MMS and SMS. Even if they were completely wrong, the phone would still make a connection to the network for voice services.
When I got my mt4g with new simcard, I have to call tmo to reigster it.
Or perhaps the phone is simcard locked.
Sent from my HTC Glacier using Tapatalk
inst1029 said:
When I got my mt4g with new simcard, I have to call tmo to reigster it.
Or perhaps the phone is simcard locked.
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
That's true, I had to do the same, I had a Blackberry prior to the MT4G and had to call and give them my IMEI and other info in order for them to activate my service, I got mine out right not through T-Mobile. I had to agree to the terms over the phone with CSR before I could do anything other than make calls.
Still I would think if he got the phone through T-Mobile and had the SIM sent with it as security goes you would still have to call in to verify you got the phone and call in the IMEI to be activated for that account.
Orical said:
That's true, I had to do the same, I had a Blackberry prior to the MT4G and had to call and give them my IMEI and other info in order for them to activate my service, I got mine out right not through T-Mobile. I had to agree to the terms over the phone with CSR before I could do anything other than make calls.
Still I would think if he got the phone through T-Mobile and had the SIM sent with it as security goes you would still have to call in to verify you got the phone and call in the IMEI to be activated for that account.
Click to expand...
Click to collapse
See, this is the difference. You were able to connect to tmobiles network. OP is unable to get that far. There is no service, and even manually attempting to select a network resulted in an error.
Sent from my HTC Glacier using XDA App
The phone could be imei blockd. T-Mobile will do that if its lost or stolen. Or if the person who got it said he never got the package and they sent a new one. I kno this cuz my brother ripped of T-Mobile by sayin he didn't get a replacement and they blocked the one he said he didn't get. Try unlocking it and using a att sim
Sent from my HTC Glacier using XDA App
urmothersluvr said:
The phone could be imei blockd. T-Mobile will do that if its lost or stolen. Or if the person who got it said he never got the package and they sent a new one. I kno this cuz my brother ripped of T-Mobile by sayin he didn't get a replacement and they blocked the one he said he didn't get. Try unlocking it and using a att sim
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Boned..
Sent from my HTC Glacier using XDA App

Tethering & Mobile Hotspot Temp Fix for ICS

Ok guys, here is a temp fix for you to continue using the mobile hotspot. But I am not sure how long it will be able to work until it gets blocked.
Go to Settings
Mobile network
Access Point Names
New APN
set the name
set the APN to: epc.tmobile.com
save
after you save, select the new APN you created instead of T-Mobile data.
Anyone mind confirming?
yeah please confirm if this helped anyone
jspina said:
Anyone mind confirming?
Click to expand...
Click to collapse
Bigger question is what is the new APN? epc has been the updated apn for a long time since the days of wap/internet2/3
ziddey just create the new APN with epc.tmobile.com and save it as is without any additional changes.
waxlabo said:
ziddey just create the new APN with epc.tmobile.com and save it as is without any additional changes.
Click to expand...
Click to collapse
lul
try it and see if it works. i'm not sure why it does but it does. you won't get the t-mobile launch page asking you to pay.
I can confirm named it the bs fix
Sent from my HTC Sensation 4G using xda premium
waxlabo said:
try it and see if it works. i'm not sure why it does but it does. you won't get the t-mobile launch page asking you to pay.
Click to expand...
Click to collapse
Actually, this does work. The only difference I can see between the APN that was on the phone and the new APN created is the following:
Original APN
APN Type: default,supl,admin,hipri
Newly created APN
APN type: Not Set
I have no clue what this means, but that is the only difference I see and the newly created APN does in fact work and allow me to tether over 4G.
Also, I had purchased EasyTether a while back to use on Sprint with my HTC Hero (before I learned to root a phone), and easytether also works using a USB cable.
Thanks to the OP for finding this!!
remove admin from apn type.
Found a possible issue with this fix. When I have the newly created APN enabled, I cannot send an mms. When I select the original APN and try and resend the mms, the mms goes through.
Anyone have suggestions?
Sent from my HTC Sensation 4G using XDA
thanks for pointing that out jtress, will try to look into it.
edit: jtress i was testing it out and it does work with the current settings. i'm not sure why you are having problems with mms. does anyone else have this issue with the mms not going through?
I have no problem either
Sent from my HTC Sensation 4G using xda premium
Does this still work? I've tried it and it didn't work for me when trying to go to amazon.com. I've also tried deleting the default apn and removing the apn type. I've even tried using wap.voicestream.com as the apn. So far nothing works.
My issue with the APN and not being able to send MMS, may have something to do with me being on Tmobile prepaid plan.
I can live with it this way. I very rarely use the tethering. So, if all I have to do is go in to the settings and switch the APN for the few minutes I use the tethering, I can live with that
tethering workarounds
Regarding the new tethering block, there are a few other workarounds that worked for me.
1) Change your user agent string to something mobile on your browser
2) Browse through an encrypted proxy (work VPN works great for me)
3) Use the internet for things other than HTTP and you'll be fine. (HTTPS works fine)
Confirm that it worked for me. I entered the new APN and restarted the phone and now it works like it did before. Thanks!
hey guys, does the usb tether still works after the update?
Wow I feel both dumb and extremely happy all at the same time but I got it to work! I never restarted the phone before so I guess my phone never properly set up the APN.
The way I got it to work:
1. Selected Default T-Mobile Data APN
2. Delete all of the information from the APN type
3. Reboot Phone
Thanks for reminding me to do the simple things!
Looks like the fun is over...
I had been using Wifi tethering for root users and it seemed to allow me to use it just fine. All of a sudden this morning it stopped working and I got a push notification to my phone about mobile hotspot access being blocked. Came here, found the APN settings in this thread and tried it. Worked for about 30 seconds before the same thing happened again.
Looks like they are being pretty hardcore about it now...
Anybody else experiencing this or know how to get around it still?

[Q] MMS APN for T-Mobile USA after Black Update

After the black update, I lost the ability to send and receive MMS on my Unlocked Lumia 1020 on T-Mobile USA network. I've entered the fast.t-mobile.com APN settings on both Internet and MMS, I have 4G LTE internet working, but MMS still does not work.
Before there was a Nokia app that auto configured this for me. I can't seem to find this after the Black update, or it is baked into the system now, but for the life of me, I cannot get the MMS working with the APN settings I have. Tried both epc and fast.
neilkarunatilaka said:
After the black update, I lost the ability to send and receive MMS on my Unlocked Lumia 1020 on T-Mobile USA network. I've entered the fast.t-mobile.com APN settings on both Internet and MMS, I have 4G LTE internet working, but MMS still does not work.
Before there was a Nokia app that auto configured this for me. I can't seem to find this after the Black update, or it is baked into the system now, but for the life of me, I cannot get the MMS working with the APN settings I have. Tried both epc and fast.
Click to expand...
Click to collapse
Same...I have the access point app installed (becomes a system setting no way to remove..) no MMS since black was working perfectly prior to.
lstrike said:
Same...I have the access point app installed (becomes a system setting no way to remove..) no MMS since black was working perfectly prior to.
Click to expand...
Click to collapse
I'll be going into my local T-Mobile store later today, hopefully I can get an answer from them.
I got mine working.
OK so with the access point app installed what I did was install a manual APN outside that settings app. I went to settings > cellular and pressed the add MMS APN.
Once I set it up I was able to send but not receive. Just use the APN settings available pretty much anywhere for T-Mobile. After that remove the settings all together and reboot.
I guess the APN app setting kicks in again and viola. Worked for me anyways. Hope it works for everyone else.
Sent from my C6903 using Tapatalk
lstrike said:
I got mine working.
OK so with the access point app installed what I did was install a manual APN outside that settings app. I went to settings > cellular and pressed the add MMS APN.
Once I set it up I was able to send but not receive. Just use the APN settings available pretty much anywhere for T-Mobile. After that remove the settings all together and reboot.
I guess the APN app setting kicks in again and viola. Worked for me anyways. Hope it works for everyone else.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Had to do it twice, but your right, it worked! Sweet
neilkarunatilaka said:
Had to do it twice, but your right, it worked! Sweet
Click to expand...
Click to collapse
Awesome! Glad I could help ya out! Hey I ain't to proud to beg, how about a thanks! I've been here for 100 years and only have one! LOL
What model do you guys have I want to purchase a 1020 but lost on what model to buy for T-Mobile use ?
Sent from my GT-I9505G using XDA Premium 4 mobile app

[Q] ATT LTE but cannot receive MMS?

This weekend I moved from StraightTalk (w/ATT SIM) to ATT. Everything worked fine on ST, but now that I'm on ATT directly.. I cannot receive MMS.
I can do everything fine -- send/receive SMS, access the Internet at LTE speeds, send MMS. I've tried a bunch of APN's and my current settings are below.
Any thoughts on what to switch would be greatly appreciated! Since I'm on a Nexus 5, AT&T has basically shrugged their shoulders and said, It's not an ATT phone, so all the features may not work.
Name: ATT Phone
APN: phone
Proxy: not set
Port: not set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: ://mmsc.mobile.att.net (removed the http to get past the newbie link filter)
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN Type: default,mms,supl,fota
APN Protocol: IPv4
APN Roaming Protocol: IPv4
Bearer: Unspecified
MVNO Type: none
K
Is your account provisioned correctly?
That all looks right... Don't know why it won't work for you, it has always worked fine for me
Sent from my Nexus 5 using xda app-developers app
Baldilocks said:
Is your account provisioned correctly?
Click to expand...
Click to collapse
How would I know if it is not?
Everything else works as it should. LTE speed, sending/receiving SMS, sending MMS...
Edit: support rep with ATT checked the IMEI and SIM number and they match what's in the system.
Newbie link filter?
I've always had http on the mmsc setting
Sent from my Nexus 5 using xda app-developers app
Sometimes it takes a little while for messages to catch up. As long as your APN is correct, and you are on the right plan, you should be fine.
---------- Post added at 08:29 PM ---------- Previous post was at 08:27 PM ----------
*system error* said:
Newbie link filter?
I've always had http on the mmsc setting
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
He means on the forum. New users can't post links.
Baldilocks said:
Sometimes it takes a little while for messages to catch up. As long as your APN is correct, and you are on the right plan, you should be fine.
It's been 48+ hours -- seems like long enough for things to sort themselves out or it can take longer than that?
No one has said the APN is wrong... I was hoping some other folks with a Nexus 5 on ATT would be able to comment/confirm that what I have works for them.
K
Click to expand...
Click to collapse
The settings are correct.
Turn off wi-fi, make sure Data is on. and try again.
Mmsc isnt
Sent from my Nexus 5 using xda app-developers app
Baldilocks said:
The settings are correct.
Turn off wi-fi, make sure Data is on. and try again.
Click to expand...
Click to collapse
No joy. Wi-fi is off, data is on (I can get to Google). I've also tried with LTE enabled and then at 3G (LTE off). Pictures continue to send fine, but just won't receive them.
Even if Wi-fi is on, I don't receive pictures.
I guess I'll wait another couple of days and see. Worst comes to worst, I can switch back to StraightTalk w/ATT sim and be where I was. Seems odd to work correctly on a second tier (in my mind anyway) carrier and not a first tier one.
Thanks!
*system error* said:
Mmsc isnt
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
If he puts the http:// in front of the mmsc, then yes it IS a link.
---------- Post added at 09:18 PM ---------- Previous post was at 09:17 PM ----------
Kwalla said:
No joy. Wi-fi is off, data is on (I can get to Google). I've also tried with LTE enabled and then at 3G (LTE off). Pictures continue to send fine, but just won't receive them.
Even if Wi-fi is on, I don't receive pictures.
I guess I'll wait another couple of days and see. Worst comes to worst, I can switch back to StraightTalk w/ATT sim and be where I was. Seems odd to work correctly on a second tier (in my mind anyway) carrier and not a first tier one.
Thanks!
Click to expand...
Click to collapse
Yeah, really not a reason that it's not working. What size MMS are you trying to send?
I've tried about 20 different pictures that I've sent historically, plus AT&T Support couldn't send me pictures... nor could any friends. I don't know the size of any of the images. Just for fun, I've tried four different SMS/MMS apps, yeah I know.. that shouldn't matter at all.
On occasion the app has said "resizing image" before letting attache and send it, so some were "large".
K
On your AT&T account online, what type of data plan do they have you on?
Baldilocks said:
On your AT&T account online, what type of data plan do they have you on?
Click to expand...
Click to collapse
Mobile Share Value Plan 300MB
Talk: Unlimited
Text: Unlimited
1 line
I tend to use 250ish, so the limit works for me.
K
Have you tried resetting the APN and then re-entering the AT&T settings? Just to see if something needs to be cleared out?
Baldilocks said:
Have you tried resetting the APN and then re-entering the AT&T settings? Just to see if something needs to be cleared out?
Click to expand...
Click to collapse
Yes, I've deleted all the APN settings my phone had and then manually entered in the one that I'm using.
I am.. it seems, quite the anomaly!
Thanks for your time and thoughts.
K
Kwalla said:
Yes, I've deleted all the APN settings my phone had and then manually entered in the one that I'm using.
I am.. it seems, quite the anomaly!
Thanks for your time and thoughts.
K
Click to expand...
Click to collapse
It's actually happened before. It's always something simple too.
Kwalla said:
Yes, I've deleted all the APN settings my phone had and then manually entered in the one that I'm using.
I am.. it seems, quite the anomaly!
Thanks for your time and thoughts.
K
Click to expand...
Click to collapse
My wife was having that problem on her GS3 with AT&T. In the messaging app we set it to roaming Auto retrieve and it worked after that.
Hope that works for you.
Sent from my EVO using XDA Premium 4 mobile app
NaterTots said:
My wife was having that problem on her GS3 with AT&T. In the messaging app we set it to roaming Auto retrieve and it worked after that.
Click to expand...
Click to collapse
I just tried that and didn't work.
And, I would like to officially stack claim to my status as an anomaly. I had one (1)picture that I sent myself today out of about 50 that actually went through. That's right, one was sent/received.. no setting or anything changed and back to can't receive.
I did also try deleting all APNs, rebooting the phone (taking the "clean things out" idea to an extreme) and manually typed in the APN.. no good.
Could my problem be with the Message Center Number? I've seen that referenced in a few places... but as I can send, it seems that wouldn't be the issue.
If I dial *#*#4636#*#* and go into Phone Information, the SMSC is blank. While I can type info into it, there's no "save" or "update" option...
If I hit refresh it populates with "+131323149810",145
Part in "s looks right for ATT, but again... no way to save it. The Update button doesn't 'seem to do anything.
K
It's definitely a weird problem for sure. It's one of those problems that if I had the phone in front of me...it might be a different story.

Categories

Resources