{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you codeworkx for original development and getting the ball rolling!
These are unofficial builds compiled from source with the desire to stay as current as possible. The official builds are several builds behind, and might not be the most compatible with current CM10.1 releases.
Built from source, not responsible for any issues this may cause if you do it wrong, YMMV
Instructions:
For the *.tar files, reboot into download mode. (Power off, boot up pressing and holding volume-up + power)
Add the appropriate *.tar file to Odin as PDA. (For gt-p5113 use gt-p5110)
Connect tablet and flash
For the *.zip files, reboot into recovery mode. (Power off, boot up pressing and holding volume-down + power)
Install the appropriate *.zip file as you would a ROM (For gt-p5113 use gt-p5110)
Reboot recovery
Downloads:
Official, but not up to date: http://clockworkmod.com/rommanager or via ROM Manager
Unofficial updater zips, but always up to date:
shakatu_recovery-clockwork-unofficial-6.0.4.5-p5100.zip Android File Host (US Server) | Deposit Files (EU Server)
MD5 = b17d8a07d5b11f2537461b5017032dd3
shakatu_recovery-clockwork-unofficial-6.0.4.5-p5110.zip Android File Host (US Server) | Deposit Files (EU Server)
MD5 = 4dc04c812dba0065f3f11a4dc272dc88
PhilZ non-touch by @Android-Andi
http://forum.xda-developers.com/showthread.php?p=47876054
Unofficial touch updater zips (new versions won't build successfully):
shakatu_recovery-clockwork-unofficial-touch-6.0.3.3-p5100.zip - EU Mirror
shakatu_recovery-clockwork-unofficial-touch-6.0.3.3-p5110.zip - EU Mirror
Unofficial tar files for Odin:
6.0.4.5 builds by @Android-Andi
Also check out TWRP!
OP updated with 6.0.3.3 build
E: failed to mount /sdcard (No such file or directory)
Thank you for this guide and the links you provide!
I copied the .zip file to the SD card and I can access it via File Manager.
However, when I reboot to recovery mode (Android system recovery 3e) and try to install the zip-file, I get this error:
E: failed to mount /sdcard (No such file or directory)
I can't access the SD card from revorery mode... Any ideas?
You can't install this with stock recovery.
Sent from my Nexus 4 using XDA Premium HD app
shakatu said:
You can't install this with stock recovery.
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for your reply... So what is the right way to install CWM recovery on stock recovery? Do you recommend to flash as PDA via ODIN? The problem is that my stock recovery is unable to access my SD card so I can't install any update as zip-file via the current recovery...
jellygoos said:
Thanks for your reply... So what is the right way to install CWM recovery on stock recovery? Do you recommend to flash as PDA via ODIN? The problem is that my stock recovery is unable to access my SD card so I can't install any update as zip-file via the current recovery...
Click to expand...
Click to collapse
Yeah flash the unofficial tar via odin then use the most recent update zip.
shakatu said:
Yeah flash the unofficial tar via odin then use the most recent update zip.
Click to expand...
Click to collapse
Thanks! Worked like a charm! :good:
THANK YOU
You are a life saver
check out my thread here
couldn't find a tar img for gt-p5110 even on cwm site (they had a zip file not a tar)
thank you so much! I pressed thanks!
mount external sd card
Does any of these allow mounting of an external sd card so we can backup to it and install zips etc.. The most current CWM still does not mount my external sd card on my p5113 it always says cant find the mount when i choose the external sd. I've tried two different versions now and am running the latest cwm with same results. it be nice to leverage the external card like i do on my phone to store nandroid backups and roms.
Thanks.
It does for me, but I always use TWRP personally... I test that the external SD mounts in CWM long enough to install TRWP back off of it! Lol
Sent from my Nexus 4 using XDA Premium HD app
neal74 said:
Does any of these allow mounting of an external sd card so we can backup to it and install zips etc.. The most current CWM still does not mount my external sd card on my p5113 it always says cant find the mount when i choose the external sd. I've tried two different versions now and am running the latest cwm with same results. it be nice to leverage the external card like i do on my phone to store nandroid backups and roms.
Thanks.
Click to expand...
Click to collapse
Format your SD card...
Sent from my GT-P5113 using xda premium
I've tried flashing the .tar via odin but it doesn't seem to work, odin says the flashing has suceed but when I try to boot in recovery (vol down+power) I just get stock recovery, I tried it with 4 other recoveries and every time the same thing occurs. My galaxy tab gt-p5110 is running stock 4.1.2 which I updated it to a few days ago.
xrgman said:
I've tried flashing the .tar via odin but it doesn't seem to work, odin says the flashing has suceed but when I try to boot in recovery (vol down+power) I just get stock recovery, I tried it with 4 other recoveries and every time the same thing occurs. My galaxy tab gt-p5110 is running stock 4.1.2 which I updated it to a few days ago.
Click to expand...
Click to collapse
I had the same thing over here. I used 6.0.1.2 from http://forum.xda-developers.com/showthread.php?p=34490421 this post (link to the recovery file: https://docs.google.com/file/d/0B02Uc9IrgGXQZjAxRUhtMW96NUk/edit?pli=1#) and installed that. That worked fine. Then I just updated through recovery to 6.0.3.3. Remember to use the zip file from recovery, and the tar file from Odin.
I'm back! I'm currently setting up a build environment for CM10.2 and then I'll build the most recent recoveries for our tab.
I had started building the 6.0.3.5 and then suddenly the 6.0.3.6 commit was pushed so I scrapped that! Figure using the CM10.2 sources rather than CM10.1 will make sure everything is fresh...
6.0.3.6 normal zips are up. Tested it with my GT-P5113. Micro SD, adb, all working. Touch builds will come later.
Hey look! 6.0.3.6 Touch!
Whoops. Must be a problem with the build servers. Touch is closed source so I can't build it myself. I'll take down the links until further notice.
Sent from my Nexus 4 using XDA Premium HD app
Well that sucks. I tried using the build server for touch again and it threw up a bunch of errors after rebooting to recovery...
shakatu said:
You can't install this with stock recovery.
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
Hello Mr.shakatu this is string somthing funny about Mr.Sammys new stock recovery on 4.2.2 ota update I try both your .tar odin TWRP and Clockworkmod and after reboot into recovery its still running Sammys Stock recovery but odin says it flashed ok could it be the new 4.2 boot loader Samsung my P5113 is brand new out the box was using your P5110 files
Related
Official ClockworkMod 6.0.1.2 Recovery
Description: This is an ODIN flashable version of the Official ClockworkMod 6.0.1.2 for the Verizon Galaxy S III for those who prefer to use ODIN to flash recovery on a low-level.
This version brings many new features listed below:
- New backup format that de-duplicates data between backups
- Supports BOTH Internal memory and External SD Card (only if external is formatted as FAT32 - Why not exFAT? See here)
- Faster backups
- Fixed restores > 2GB
- Minor UI tweaks (new background, animated Android)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
***Your Bootloader Must Be Unlocked First or ODIN Will Fail to Flash***
(See Here for How to Unlock)
Flashing ClockworkMod 6.0.1.2 via ODIN
Samsung Official USB Drivers - Link
ODIN v3.07 - Link
ClockworkMod 6.0.1.2 (Non-Touch Version) - Download - MD5 = F00F13606109284739AD8AAF19F5E3D9
ClockworkMod 6.0.1.2 (Touch Version) - Download - MD5 = 929EEC3DB07CC578256447CC6E4ED124
1. Install USB drivers
2. Download ODIN v3.07
3. Download and extract the ClockworkMod 6.0.1.2 tar ffile from the zip above or the attachment in this post
4. Boot phone into ODIN mode (See here for how-to)
5. Connect your device to your PC via USB
6. Flash the tar file using ODIN v3.07 (Select PDA, select the CWM tar file, click Start)
Click to expand...
Click to collapse
You should now have ClockworkMod 6.0.1.2 flashed onto your recovery partition so just boot to recovery and you will have it working.
1st
Cant wait to try this when its all done!!!!
Does this have access to internal? I've been using touch 5.0.8.9 from ez. I Flashed 6 from ez but couldn't find internal.
Sent from my SCH-I535 using xda premium
KennyCap said:
Does this have access to internal? I've been using touch 5.0.8.9 from ez. I Flashed 6 from ez but couldn't find internal.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I'm currently using 6.0.1.0 and can see both internal and external sd in recovery. I assume this would be the same.
Sent from my SCH-I535 using xda app-developers app
is this the build dhacker29 posted? On the rombot he has had a 6.0.1.1 recovery for the GS3 for awhile, thing works great.
Wasnt this version supposed to have a feature to create your own Rom zip? Couldve sworn I read about this feature being implemented.
Why are the dates still messed up my backups are showing that today is 1970. I have flashed the latest version of cwm 6.0.1.2 and the dates are still messed up. Wtf this is nuts
Sent from my SCH-I535 using Tapatalk 2
jgrimberg1979 said:
Why are the dates still messed up my backups are showing that today is 1970. I have flashed the latest version of cwm 6.0.1.2 and the dates are still messed up. Wtf this is nuts
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Yeah the date issue has always been a bummer for me when I forget to rename my backups with a file manager. Good luck figurung out what is what LOL
Please note that now that the official version has been released I have updated the OP entirely. For now only touch version (non-touch doesn't want to download for some reason).
boynamedstacy said:
Yeah the date issue has always been a bummer for me when I forget to rename my backups with a file manager. Good luck figurung out what is what LOL
Click to expand...
Click to collapse
Its nuts seriously even when I try and rename my Recovery it get all ****ed up and in don't know which is which because it in 1970.2...format and so I end up renaming the wrong one.
I think the bigger issue is that when you restore from a backup your file system once restored is showing a created date or modified date of the same 1970 date. So basically everything that is restored has a timestamp of 1970(not sure about data). I wonder if that has implications that we are unaware of??
I would have thought this would have been figured out by now. This is a first for me so I wonder if it is just with the sgs3 because the 10 other Android devices have never had this bug.
Sent from my SCH-I535 using Tapatalk 2
Finally got the non-touch version to download. OP updated.
Were can we get just the img.
sent from locked bootloadrer SGS3 running a custom kernel
jgrimberg1979 said:
Its nuts seriously even when I try and rename my Recovery it get all ****ed up and in don't know which is which because it in 1970.2...format and so I end up renaming the wrong one.
I think the bigger issue is that when you restore from a backup your file system once restored is showing a created date or modified date of the same 1970 date. So basically everything that is restored has a timestamp of 1970(not sure about data). I wonder if that has implications that we are unaware of??
I would have thought this would have been figured out by now. This is a first for me so I wonder if it is just with the sgs3 because the 10 other Android devices have never had this bug.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Koush mentions the issue may lie with the way the kernel processes dates on a low level...aka it's up to the device. Try this for a fix (not yet confirmed if working with CWM6 backups but worth a try - [How To] Fix md5 mismatch nandroid restore)
wera750 said:
Were can we get just the img.
sent from locked bootloadrer SGS3 running a custom kernel
Click to expand...
Click to collapse
* ClockworkMod 6.0.1.2 Non-Touch
* ClockworkMod 6.0.1.2 Touch
open1your1eyes0 said:
* ClockworkMod 6.0.1.2 Non-Touch
* ClockworkMod 6.0.1.2 Touch
Click to expand...
Click to collapse
Bad link
sent from locked bootloadrer SGS3 running a custom kernel
wera750 said:
Bad link
sent from locked bootloadrer SGS3 running a custom kernel
Click to expand...
Click to collapse
I just downloaded both. Though I will mention I have trouble downloading the non-touch version. Something is up with that link but after a couple tries eventually I got it. Touch version downloads no problem however.
open1your1eyes0 said:
Koush mentions the issue may lie with the way the kernel processes dates on a low level...aka it's up to the device. Try this for a fix (not yet confirmed if working with CWM6 backups but worth a try - [How To] Fix md5 mismatch nandroid restore)
Click to expand...
Click to collapse
Thanks but I don't have a md5 mismatch issue. I
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 09:44 PM ---------- Previous post was at 09:43 PM ----------
wera750 said:
Were can we get just the img.
sent from locked bootloadrer SGS3 running a custom kernel
Click to expand...
Click to collapse
Just download it and extract the .img from it
Sent from my SCH-I535 using Tapatalk 2
So if I'm already rooted and have the Synergy Rom with CWM 6.0.1.0 and have my bootloader unlocked, can I still flash this and still use the same ROM? or will I need a new ROM
The links in the op are zips . So I can flash them?
Sent from my SCH-I535 using xda premium
rkerrddd said:
The links in the op are zips . So I can flash them?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Please read this step: "3. Download ClockworkMod 6.0.1.2 tar file above or extract the tar file from the zip attachment in this post"
I have tried both CWM recover and TWRP and I cannot get either one to open a zip to flash. Both say the same thing;
"Finding update package...
Opening update package...
E: Can't open /sdcard/CleanROM 2.7 Inheritance ODEX.zip
(bad)
Installation aborted."
I have tried redownloading the rom, downloading different and stock roms but to no avail. It always says can't open such rom...
I have already deleted stock operating system so I cannot go back to stock... I have recovery, fastboot, and that's about it. Someone please help me. :'(
did you unlock your device prior to rooting? silly question, i know.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
timrock said:
did you unlock your device prior to rooting? silly question, i know.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
Yes, my device is unlocked. I successfully used the bootloader unlocking tool by asus.
Are you downloading to the tablet or a PC or MAC desktop?
If you're downing to the tablets internal try instead to down the file to a desktop and move it to an external microSD in the tab.
Thats OK said:
Are you downloading to the tablet or a PC or MAC desktop?
If you're downing to the tablets internal try instead to down the file to a desktop and move it to an external microSD in the tab.
Click to expand...
Click to collapse
I am downloading from a PC onto a 16gb MicroSD card. It see's the file but cannot open it. "Unable to open zip file." "Error flashing zip 'external_sdcard/CleanRom 2.7 Inheritance ODEX.zip' "
MrUnfeigned said:
I am downloading from a PC onto a 16gb MicroSD card. It see's the file but cannot open it. "Unable to open zip file." "Error flashing zip 'external_sdcard/CleanRom 2.7 Inheritance ODEX.zip' "
Click to expand...
Click to collapse
Copy the zip to your internal memory and flash from internal (/sdcard).
buhohitr said:
Copy the zip to your internal memory and flash from internal (/sdcard).
Click to expand...
Click to collapse
I attempted that as well as other locations and it still will not flash any zip.
MrUnfeigned said:
I attempted that as well as other locations and it still will not flash any zip.
Click to expand...
Click to collapse
Have you try to redownload the rom file?? the file itself may be bad.
Try checking the md5sum of the zip file directly on the device (use adb shell from a PC and the "md5sum" command).
The zip files are fine. I almost want to think that it won't open the zips because it thinks I'm not rooted or something... Is there a way to install a rom from ADB or another way... as if I didn't have recovery?
MrUnfeigned said:
I have tried both CWM recover and TWRP and I cannot get either one to open a zip to flash. Both say the same thing;
"Finding update package...
Opening update package...
E: Can't open /sdcard/CleanROM 2.7 Inheritance ODEX.zip
(bad)
Installation aborted."
Click to expand...
Click to collapse
These messages come from the stock recovery. If you really installed CWM and TWRP, it didn't work - try installing your recovery again.
_that said:
These messages come from the stock recovery. If you really installed CWM and TWRP, it didn't work - try installing your recovery again.
Click to expand...
Click to collapse
I have tried installing it several times and using different recoveries.. Is there a way to install a different recovery with ADB or another way besides using "Scott's TF700T Recovery Install Tool"?
p.s. I really appreciate all the comments and help I'm receiving. Please keep it coming . I really want to get my tablet back in working order.
Did you check the md5 sum of ROMs? Could still be bad downloads
MrUnfeigned said:
I cannot install a .zip file with TWRP version 2.2.2.3 or 2.3.1.0. Both give me the same error.
"Finding update package...
Opening update package...
E: Can't open /sdcard/CleanROM 2.7 Inheritance ODEX.zip
(bad)
Installation aborted."
Click to expand...
Click to collapse
See the other thread - these messages are from the stock recovery, TWRP does not contain these strings.
TWRP looks like this: http://phota.me/7zXg.jpg - did you ever see this screen?
MrUnfeigned said:
I have tried installing it several times and using different recoveries.. Is there a way to install a different recovery with ADB or another way besides using "Scott's TF700T Recovery Install Tool"?
p.s. I really appreciate all the comments and help I'm receiving. Please keep it coming . I really want to get my tablet back in working order.
Click to expand...
Click to collapse
You have USB degugging checked under settings/developer options....correct?
Pretty sure _that is onto your problem with not having the custom recovery installed.
Remember you have to hold volume down for at least 5 seconds on a reboot.
Look to see if the tiny letters upper left say booting recovery.
If TWRP is installed you'll see a blue looking screen that says "TEAMWIN" after releasing the volume button.
*just a note if you're properly rooted and can verify root go to Google Play and download GOO Manager to your tablet.
GOO Manager is the easiest way to install the latest TWRP intead of using fastboot.
mr.wizard said:
Did you check the md5 sum of ROMs? Could still be bad downloads
Click to expand...
Click to collapse
How do I check the md5 sums? Never heard of that before...
_that said:
See the other thread - these messages are from the stock recovery, TWRP does not contain these strings.
TWRP looks like this: http://phota.me/7zXg.jpg - did you ever see this screen?
Click to expand...
Click to collapse
Here are some pictures of what's going on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thats OK said:
You have USB degugging checked under settings/developer options....correct?
Pretty sure _that is onto your problem with not having the custom recovery installed.
Remember you have to hold volume down for at least 5 seconds on a reboot.
Look to see if the tiny letters upper left say booting recovery.
If TWRP is installed you'll see a blue looking screen that says "TEAMWIN" after releasing the volume button.
*just a note if you're properly rooted and can verify root go to Google Play and download GOO Manager to your tablet.
GOO Manager is the easiest way to install the latest TWRP intead of using fastboot.
Click to expand...
Click to collapse
I have TWRP installed. Here are some picture to help describe a little better about what's going on.
why two threads? and the pics dont show in either thread.
http://s1323.beta.photobucket.com/user/MrUnfeigned/library/TF700%20problems
Here is a link to the place the images are stored. If you could take a look it might better explain things.
MrUnfeigned said:
http://s1323.beta.photobucket.com/user/MrUnfeigned/library/TF700%20problems
Here is a link to the place the images are stored. If you could take a look it might better explain things.
Click to expand...
Click to collapse
do you have the zip on the memory card? because sdcard is also known as the internal memory, not the actual microsd. move the zip to the memory card, if you have not done so already. navigate to the microsd card. You want to keep going up a level until you see a folder called REMOVABLE. open that folder, and you will see your memory card. now navigate to where the zip file is.
Hi guys,
I managed to port latest CWM v6.0.3.3 & v6.0.3.5 for our device. :victory:
It took me some time to find out how to fix boot loop issues which occurs when we use online CWM Builder. (Thanks to mb-14)
The only new feature I noticed, was "INSTALL ZIP FROM SIDELOAD" which allows us to install ZIPs using ADB commands.
There's no bootloop issues or such, still you should TRY IT AT YOUR OWN RISK.
I also changed the background colour to black for CWM 5 clean look's lovers.
I don't recommend touch version because the font it's too big and I can't change. better use the regular one.
Touch means Touch support.
BlackBG/Dark means Black Background.
No root users, download *.tar.md5 file only.
Root users, download any file *.zip or *.tar.md5
Hope you like it.
And ignore that error "Warning: no file_context found ...."
GT-S7500L / GT-S7500T users, don't flash it.
I might be able to help you porting it to your variants.
Screenshots are attached below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download link: https://www.dropbox.com/sh/gh7yw46d45kq57n/ZiL6oabHVE
How to flash it using Odin?
Boot into download mode. (hold the following buttons at the same time and in the following order:
HOME + VOLUME DOWN + POWER)
Connect your phone to PC using USB Cable.
Open Odin.
Uncheck anything other than Auto Reboot & F.Reset Time.
Click on PDA button and choose your downloaded *.tar.md5 file. (don't uncheck PDA)
Hit Start.
If you got an error, rename it to *.tar (remove .md5 extention)
Your phone will reboot, to boot into recovery mode. (hold the following buttons at the same time and in the following order:
HOME + VOLUME DOWN + VOLUME UP + POWER)
How to flash it through a custom recovery? (needs root)
Boot into recovery mode.
Choose INSTALL ZIP FROM SD-CARD
Choose any *.zip downloaded attachment.
How to flash it using terminal emulator? (needs root)
Extract recovery.img file to any folder (let's say /sdcard)
Open terminal emulator
Input this code:
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p12
How to use it?
VOLUME UP/DOWN: scroll up/down
POWER: select
Changes will take effect after a reboot.
Thanks for that seems awesome with Black Background. I wasn't able to flash it through twrp is that normal?
IceGTX said:
Thanks for that seems awesome with Black Background. I wasn't able to flash it through twrp is that normal?
Click to expand...
Click to collapse
No, I flashed both of them using TWRP without any problems 3 hours ago.
Do you get an error message? And what does it say?
Sent from my GT-S7500 using Tapatalk 4 Beta
Bassel Bakr said:
No, I flashed both of them using TWRP without any problems 3 hours ago.
Do you get an error message? And what does it say?
Sent from my GT-S7500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
It said that it failed, tried with sig verifacation and without. only the one with the black backround i tried... In the end i did it from terminal.
Just from curiosity it's possible to make it look like s3?
CWM touch is proprietary
IceGTX said:
It said that it failed, tried with sig verifacation and without. only the one with the black backround i tried... In the end i did it from terminal.
Just from curiosity it's possible to make it look like s3?
Click to expand...
Click to collapse
Yes, it's possible, but touch function won't work unless you have ICS or JB kernel. I will give it a try.
Sent from my GT-S7500 using Tapatalk 4 Beta
no, read my above post. And if I may ask, what makes a kernel "ICS or JB kernel"?
thanks for new recovery
flashing right now!!!
---------- Post added at 10:31 PM ---------- Previous post was at 10:27 PM ----------
flashed it
home button is working as scrolling as we scroll with volume keys and menu key in working as scroll down action
i think home button should be used to enter in particular option
i have to use power button to enter or exit
TheWhisp said:
no, read my above post. And if I may ask, what makes a kernel "ICS or JB kernel"?
Click to expand...
Click to collapse
Check this: http://builder.clockworkmod.com
It's written there that touch recovery will only work on ICS and later kernels.
I already tried to port touch recovery but it looked so much ugly on ace plus, it was like changing LCD density from 160 to 240 !
As I'm not a developer I couldn't fix it, but it works anyway.
Sent from my GT-S7500 using Tapatalk 4 Beta
it's closed source, so we can't fix it for our screens :/
Thread updated with drop box link contains 8 attachments:
4 *.zip and 4 *.tar.md5 (specially for no root users)
Touch version uploaded. (I don't recommend it because the font is too big and I can't change it)
Screenshots uploaded now.
Thanks so much !
Bassel Bakr said:
Thread updated with drop box link contains 8 attachments:
4 *.zip and 4 *.tar.md5 (specially for no root users)
Touch version uploaded. (I don't recommend it because the font is too big and I can't change it)
Screenshots uploaded now.
Click to expand...
Click to collapse
Bassel Bakr thanks so much , I was looking for a CWM 6.0.3.5 Recovery , because TheWhisp told in his thread (on mini 2 CWM 6.0.3.5 recovery) that this recovery is able to backup Faster compared to other CWM Recoveries . Thanks so much :laugh: .Enjoying it really much :good:
Firstly installed that touch recovery BlackBG , but it looked weird , then I installed the CWM 6.3.3 without touch , through Terminal Emulator .
installed fine but when try to install cm10.1 it gives error!!!
ManzzaShahi said:
installed fine but when try to install cm10.1 it gives error!!!
Click to expand...
Click to collapse
What does it say?
blinqipa said:
Bassel Bakr thanks so much , I was looking for a CWM 6.3.3 Recovery , because TheWhisp told in his thread (on mini 2 CWM 6.3.3 recovery) that this recovery is able to backup Faster compared to other CWM Recoveries . Thanks so much :laugh: .Enjoying it really much :good:
Firstly installed that touch recovery BlackBG , but it looked weird , then I installed the CWM 6.3.3 without touch , through Terminal Emulator .
Click to expand...
Click to collapse
I thought that if I uploaded touch version, someone could make it works as it should be. (still waiting)
By the way, did you try to flash any of the ZIPs and got an error that made use terminal method?
Bassel Bakr said:
What does it say?
Click to expand...
Click to collapse
it gives error status 7
and i guess it corrupts file as well
i tried flashing this recovery and both time it gave same error
also i mount sdcard and copied cm10.1 again and tried but same issue
and i flashed old recovery back
ManzzaShahi said:
it gives error status 7
and i guess it corrupts file as well
i tried flashing this recovery and both time it gave same error
also i mount sdcard and copied cm10.1 again and tried but same issue
and i flashed old recovery back
Click to expand...
Click to collapse
Solution is here: Click ME
Bassel Bakr said:
Solution is here: Click ME
Click to expand...
Click to collapse
ya i know about that error
but this problem is not in other recovery and twrp as well
ManzzaShahi said:
ya i know about that error
but this problem is not in other recovery and twrp as well
Click to expand...
Click to collapse
This error is because of the updater-script not the recovery itself, other recoveries ignore asserts checks (I guess).
can you post some images of touch version? If it's really resolution problem maybe we can contact Koush about it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Of course, the recovery has been tested but whatever happens on your device will not be held against the developer.
What Is CWM Recovery ?
CWM recovery is a way that enables you to flash a custom rom , customize your rom and can save you from bad situations. To Be fully in control of your android device you need a recovery and this is one of them.
CM Nightlies install with no problems.
How To Install CWM Recovery ?
Only DD method
You need to be rooted before you continue.
1. Copy recovery.img to the root of your internal sdcard and choose either method below
a.Via PC :
Make sure that your device is on usb debugging mode (also ensure you have Samsung adb drivers installed).
Plug your device in your notebook/pc and open Terminal/CMD.
Copy and Paste the Following Commands :
PHP Code:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make sure that the partition is mmcblk0p10 or you will brick your device !
now you can reboot to recovery (volume up + home +power) or type reboot recovery via Terminal or CMD and enjoy CWM 6.0.4.7
2.On Phone :
First Download Terminal Emulator From the Play Store.
Start Terminal,
Type the Following Commands :
PHP Code:
su (you need root acess for it )
Then
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make sure that partition is mmcblk0p10 or you will brick your device !(guys with fat fingers stay away, use your pc !)
now you can reboot to recovery (volume up + home +power) or type reboot recovery via Terminal and enjoy CWM 6.0.4.7
Thanks To :
CM Team For CWM recovery .
@intervigil @Alberto96 @Faryaab @Koush {Without them recovery would not be here for our device }
Downloads :
Updated 6.0.4.8 Touch Recovery.img (Tested and Verified)
Recovery.img
Touch Recovery.img (Tested and Verified)
Recovery.img
Regular Recovery.img (Didn't Test but 100% SURE IT WORKS)
Recovery.img
Change Log :
Build #2 Version Update
Build #1 Fully Working.
FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .
Please at least Hit The Thanks Button
PM ME if Links are dead
Touch version confirmed OK. Thanks OP
Sent from my GT-I9500 using Tapatalk
Here is Odin Flashable tar.md5 file. Unrar and flash GT-I9500-CWM-6.0.4.7.tar.md5 file via AP for odin.
Thanks alvin14
guys i have the twrp recovery installed right now.. and im on a mac.. so will the adb method work fine? or do i only do it via odin? thanks a lot!
androidindian said:
guys i have the twrp recovery installed right now.. and im on a mac.. so will the adb method work fine? or do i only do it via odin? thanks a lot!
Click to expand...
Click to collapse
you can try both.
For those who use Mac… don't like to use Odin out of fear of retribution from Scandinavian deities or are scared to typo mmcblk0p10 and brick their S4...
Download the CWM / TWRP flashable ZIP for the touch recovery here...
Packed by myself, tested and working on my phone... Thanks to alvin14 for the recovery.img.
http://d-h.st/ahU
or attached...
stassano said:
For those who use Mac… don't like to use Odin out of fear of retribution from Scandinavian deities or are scared to typo mmcblk0p10 and brick their S4...
CWM / TWRP flashable linked for the touch recovery.
Packed by myself, tested and working on my phone... Thanks to alvin14 for the recovery.img.
http://d-h.st/ahU
or attached...
Click to expand...
Click to collapse
awesome thanks a lot mate! ive been on twrp and flashed the 6.0.4.5 from the other thread the phone blacks out.. so was wondering if adb method would work, but will try the file you have given now thanks mate..
androidindian said:
awesome thanks a lot mate! ive been on twrp and flashed the 6.0.4.5 from the other thread the phone blacks out.. so was wondering if adb method would work, but will try the file you have given now thanks mate..
Click to expand...
Click to collapse
Let us know if it worked for you from TWRP... I flashed from CWM 6.0.4.4.
Can somebody confirm if restore works fine?
Earlier version was fiving fc after the restore. And you will have to factory reset it.
It works just fine...
Sent from my GT-I9500 using Tapatalk
Thanks
I'm not getting an md5/tar file, I'm getting a recovery.img file? What do i do?
When I Try Flashing Rom, It's Say Aborted Error 7. When Im Flashing Roms. Like Wanam,Legend.
Then Im Flashing Cm11 It Works. I had to Downgrade My Recovery To 6.0.4.5 To Flash My Rom Back.
Drasztic said:
I'm not getting an md5/tar file, I'm getting a recovery.img file? What do i do?
Click to expand...
Click to collapse
Use DD method. Haven't downloading that method to test from the user that uploaded it.
Sent from my GT-I9500 using Tapatalk
[recovery][gt-i9500]cwm 6.0.4.7 *everything works*
SiNxHaCk said:
When I Try Flashing Rom, It's Say Aborted Error 7. When Im Flashing Roms. Like Wanam,Legend.
Then Im Flashing Cm11 It Works. I had to Downgrade My Recovery To 6.0.4.5 To Flash My Rom Back.
Click to expand...
Click to collapse
I think that's probably a ClockWorkMod thing. Or the specific ROM. Have no problems at all with ROMS. Especially Wanam.
Sent from my GT-I9500 using Tapatalk
citymen34 said:
Here is Odin Flashable tar.md5 file. Unrar and flash GT-I9500-CWM-6.0.4.7.tar.md5 file via AP for odin.
Thanks alvin14
Click to expand...
Click to collapse
Many Thanks alvin14 and citymen34 for the tar. Working like a Charm! Kind Regards
Works smooth on my i9500 with the official kitkat. Thanks.
Works great with CM11 OTA updates!:good:
Edit: recovery works perfectly...
Thanks...
Sorry I did say It's working like a Charm but after restoring from a backup I'm getting FC's on stock 4.4.2 Russian & Thiland updates, Any ideas!
BTW, on Official Cm11 4.4.2 with CWM I have no problems Restoring. Please can you tell me from where the sourse code was taken. Many Thanks & Kind Regards!
[CUSTOM KK ROM] Nexus 5 Edition ROM
Yavu21 is original developer of ROM
This is the orginal ROM thread
http://forum.pittech.net/index.php?topic=24323.0
ROM Features
Nexus 5 feel
Busyboxed
Init.d Supported
init.d Tweaks
ODeodex ROM
Viper4android included - working
lenovo camera
CM file manager
advanced nexus settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HOW TO INSTALL
Use custom KK recovery from here.
I prefer [CWM Advanced Edition] PhilZ Touch 6.57.9 - cwm 6.0.5.1.
(Internal sd-card refereed as sdcard00, external as sdcard01)
Download rom zip file.
Put into sd card.
Flash the desired recovery.
Boot into recovery.
BACKUP CURRENT ROM
Wipe for flash of new rom.
Or wipe data/system/delvic cache/cache.
Select Install From SD (Internal or External)
Select the zip file and Select YES
Reboot.
THINGS TOBE NOTED
First boot takes time 3-5 mins so be patient.
wait until it boots.
After first boot
if no root
flash kitkat rooter
reboot
viper - if issue
install busybox provided
Credits
DinasNet from 4pda network.
DOWNLOAD LINK
downloding
thanks for this rom
Downloaded
First trying this....
avi3230 said:
Nexus 5 Edition ROM
....After first boot if no root flash kitkat rooter reboot
viper - if issue install busybox provided....
Click to expand...
Click to collapse
will this (all your kk roms) work from cwm v6.0.2.8 recovery?
the attached "Root kitkat_SuperSu.zip" is only for this rom?
or, universal for your kk roms? btw, busybox not seen. will this do?
m0han said:
will this (all your kk roms) work from cwm v6.0.2.8 recovery?
the attached "Root kitkat_SuperSu.zip" is only for this rom?
or, universal for your kk roms? btw, busybox not seen. will this do?
Click to expand...
Click to collapse
yes of course the rom can be flashed with any recovery above cwm 6.0.
actually kitkat support flash of rom from cwm 5.5.
yes the attachment is universal for all mtk6589 devices. so its named like that.
busybox already included in the rom as well a busybox app is added as sometimes after rooting viper refuses to install or it get installed but after reboot again ask for drivers which is issue with busybox.
so u need to updated it from the app provided (ss no 6)
This rom is odexed which gives issue of rooting and customization (viper installation) so we need to follow these given steps.
avi3230 said:
yes of course the rom can be flashed with any recovery above cwm 6.0....
yes the attachment is universal for all mtk6589 devices. so its named like that.
..........sometimes after rooting viper refuses to install.....
Click to expand...
Click to collapse
thanks for the clarification. hmmm, not a fan of viper.
m0han said:
thanks for the clarification. hmmm, not a fan of viper.
Click to expand...
Click to collapse
Busybox is useful for many things viper is just a example
viper changes audio effects file which is possible with root and busybox.
so i always test busybox function with viper:good::good:
Total 31 downloads.
This is one of the most downloaded rom after LG & android L.:good::good::good:
Good work, Avi. Very impressed with what you're doing for this phone.
Sorry that I haven't been too active to try any of these ROM's and give a feedback to you. Too busy with my exams and stuff.
Will try out one of these ROM's soon.
i flashed this rom using carliv touch recover v2.5 and then booted it is stucked in booting screen and then i change to stock rom and flashed CWM 6.0.2.8 and flashed the rom again but still the same problem !!
Are u on kitkat? If yes, use philz touch recovery. Then flash the rom
Sent from my Q3000 using XDA Free mobile app
currently im using the stock rom.......the philz recovery is in rar format and the flashify is not recognizing the rar files and recognizing only 7z format, is it possible to flash the philz recover in recover ?? my current recovery is carliv v2.5--->JB
Rishi45 said:
currently im using the stock rom.......the philz recovery is in rar format and the flashify is not recognizing the rar files and recognizing only 7z format, is it possible to flash the philz recover in recover ?? my current recovery is carliv v2.5--->JB
Click to expand...
Click to collapse
extract the 7z file u will get recovery.img
use it with sp tools or mobile uncle tool to flash.
avi3230 said:
extract the 7z file u will get recovery.img
use it with sp tools or mobile uncle tool to flash.
Click to expand...
Click to collapse
Doesn't work for me either. Stuck at the boot logo.
Tried to flash it twice via Philz.
Sad to see that even though this ROM has the highest no. of downloads (I suppose), no one really cares to write a feedback.
Vineet3 said:
Doesn't work for me either. Stuck at the boot logo.
Tried to flash it twice via Philz.
Sad to see that even though this ROM has the highest no. of downloads (I suppose), no one really cares to write a feedback.
Click to expand...
Click to collapse
dont know the exact reason why its not working in ur phone.
I flashed with philz
sachin flashed with 6.0.2.8
for both its working.
can u explain in bit details so we can come to a conclusion.
ur phone came with??
u using previously recovery/rom.
avi3230 said:
can u explain in bit details so we can come to a conclusion.
ur phone came with??
u using previously recovery/rom.
Click to expand...
Click to collapse
My Phone came with JB. 4.2.1. First Xolo Q3k owner here, if you remember.
I previously had the same recovery installed, i.e. Philz. And the ROM I was previously using was XTREME V1 by you as well (pretty stable ROM, loved it. Wanted to try something new, so started messing around)
Vineet3 said:
My Phone came with JB. 4.2.1. First Xolo Q3k owner here, if you remember.
I previously had the same recovery installed, i.e. Philz. And the ROM I was previously using was XTREME V1 by you as well (pretty stable ROM, loved it. Wanted to try something new, so started messing around)
Click to expand...
Click to collapse
OK just try flashing legand rom
if its also not booting then its the issue with uboot file.
Just try and report.
avi3230 said:
OK just try flashing legand rom
if its also not booting then its the issue with uboot file.
Just try and report.
Click to expand...
Click to collapse
Oh, I'm currently using that ROM. And it seems good except for one thing.
For some reason, I'm not able to add a navigation bar via GB or any other Xposed Module. Tried a couple of them, but didn't work.
Edit - Alright, just checked. There's an option to add NavBar via Legend Setting in the settings. Enabled it, I got what I wanted. Will report back again if I anything.
.
Mr Avi, i want to download this rom but I'm not able to. When i follow the link, the file is not available there, it's saying file not available. Can you help me in this matter?