Hi guys,
I managed to port latest CWM v6.0.3.3 & v6.0.3.5 for our device. :victory:
It took me some time to find out how to fix boot loop issues which occurs when we use online CWM Builder. (Thanks to mb-14)
The only new feature I noticed, was "INSTALL ZIP FROM SIDELOAD" which allows us to install ZIPs using ADB commands.
There's no bootloop issues or such, still you should TRY IT AT YOUR OWN RISK.
I also changed the background colour to black for CWM 5 clean look's lovers.
I don't recommend touch version because the font it's too big and I can't change. better use the regular one.
Touch means Touch support.
BlackBG/Dark means Black Background.
No root users, download *.tar.md5 file only.
Root users, download any file *.zip or *.tar.md5
Hope you like it.
And ignore that error "Warning: no file_context found ...."
GT-S7500L / GT-S7500T users, don't flash it.
I might be able to help you porting it to your variants.
Screenshots are attached below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download link: https://www.dropbox.com/sh/gh7yw46d45kq57n/ZiL6oabHVE
How to flash it using Odin?
Boot into download mode. (hold the following buttons at the same time and in the following order:
HOME + VOLUME DOWN + POWER)
Connect your phone to PC using USB Cable.
Open Odin.
Uncheck anything other than Auto Reboot & F.Reset Time.
Click on PDA button and choose your downloaded *.tar.md5 file. (don't uncheck PDA)
Hit Start.
If you got an error, rename it to *.tar (remove .md5 extention)
Your phone will reboot, to boot into recovery mode. (hold the following buttons at the same time and in the following order:
HOME + VOLUME DOWN + VOLUME UP + POWER)
How to flash it through a custom recovery? (needs root)
Boot into recovery mode.
Choose INSTALL ZIP FROM SD-CARD
Choose any *.zip downloaded attachment.
How to flash it using terminal emulator? (needs root)
Extract recovery.img file to any folder (let's say /sdcard)
Open terminal emulator
Input this code:
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p12
How to use it?
VOLUME UP/DOWN: scroll up/down
POWER: select
Changes will take effect after a reboot.
Thanks for that seems awesome with Black Background. I wasn't able to flash it through twrp is that normal?
IceGTX said:
Thanks for that seems awesome with Black Background. I wasn't able to flash it through twrp is that normal?
Click to expand...
Click to collapse
No, I flashed both of them using TWRP without any problems 3 hours ago.
Do you get an error message? And what does it say?
Sent from my GT-S7500 using Tapatalk 4 Beta
Bassel Bakr said:
No, I flashed both of them using TWRP without any problems 3 hours ago.
Do you get an error message? And what does it say?
Sent from my GT-S7500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
It said that it failed, tried with sig verifacation and without. only the one with the black backround i tried... In the end i did it from terminal.
Just from curiosity it's possible to make it look like s3?
CWM touch is proprietary
IceGTX said:
It said that it failed, tried with sig verifacation and without. only the one with the black backround i tried... In the end i did it from terminal.
Just from curiosity it's possible to make it look like s3?
Click to expand...
Click to collapse
Yes, it's possible, but touch function won't work unless you have ICS or JB kernel. I will give it a try.
Sent from my GT-S7500 using Tapatalk 4 Beta
no, read my above post. And if I may ask, what makes a kernel "ICS or JB kernel"?
thanks for new recovery
flashing right now!!!
---------- Post added at 10:31 PM ---------- Previous post was at 10:27 PM ----------
flashed it
home button is working as scrolling as we scroll with volume keys and menu key in working as scroll down action
i think home button should be used to enter in particular option
i have to use power button to enter or exit
TheWhisp said:
no, read my above post. And if I may ask, what makes a kernel "ICS or JB kernel"?
Click to expand...
Click to collapse
Check this: http://builder.clockworkmod.com
It's written there that touch recovery will only work on ICS and later kernels.
I already tried to port touch recovery but it looked so much ugly on ace plus, it was like changing LCD density from 160 to 240 !
As I'm not a developer I couldn't fix it, but it works anyway.
Sent from my GT-S7500 using Tapatalk 4 Beta
it's closed source, so we can't fix it for our screens :/
Thread updated with drop box link contains 8 attachments:
4 *.zip and 4 *.tar.md5 (specially for no root users)
Touch version uploaded. (I don't recommend it because the font is too big and I can't change it)
Screenshots uploaded now.
Thanks so much !
Bassel Bakr said:
Thread updated with drop box link contains 8 attachments:
4 *.zip and 4 *.tar.md5 (specially for no root users)
Touch version uploaded. (I don't recommend it because the font is too big and I can't change it)
Screenshots uploaded now.
Click to expand...
Click to collapse
Bassel Bakr thanks so much , I was looking for a CWM 6.0.3.5 Recovery , because TheWhisp told in his thread (on mini 2 CWM 6.0.3.5 recovery) that this recovery is able to backup Faster compared to other CWM Recoveries . Thanks so much :laugh: .Enjoying it really much :good:
Firstly installed that touch recovery BlackBG , but it looked weird , then I installed the CWM 6.3.3 without touch , through Terminal Emulator .
installed fine but when try to install cm10.1 it gives error!!!
ManzzaShahi said:
installed fine but when try to install cm10.1 it gives error!!!
Click to expand...
Click to collapse
What does it say?
blinqipa said:
Bassel Bakr thanks so much , I was looking for a CWM 6.3.3 Recovery , because TheWhisp told in his thread (on mini 2 CWM 6.3.3 recovery) that this recovery is able to backup Faster compared to other CWM Recoveries . Thanks so much :laugh: .Enjoying it really much :good:
Firstly installed that touch recovery BlackBG , but it looked weird , then I installed the CWM 6.3.3 without touch , through Terminal Emulator .
Click to expand...
Click to collapse
I thought that if I uploaded touch version, someone could make it works as it should be. (still waiting)
By the way, did you try to flash any of the ZIPs and got an error that made use terminal method?
Bassel Bakr said:
What does it say?
Click to expand...
Click to collapse
it gives error status 7
and i guess it corrupts file as well
i tried flashing this recovery and both time it gave same error
also i mount sdcard and copied cm10.1 again and tried but same issue
and i flashed old recovery back
ManzzaShahi said:
it gives error status 7
and i guess it corrupts file as well
i tried flashing this recovery and both time it gave same error
also i mount sdcard and copied cm10.1 again and tried but same issue
and i flashed old recovery back
Click to expand...
Click to collapse
Solution is here: Click ME
Bassel Bakr said:
Solution is here: Click ME
Click to expand...
Click to collapse
ya i know about that error
but this problem is not in other recovery and twrp as well
ManzzaShahi said:
ya i know about that error
but this problem is not in other recovery and twrp as well
Click to expand...
Click to collapse
This error is because of the updater-script not the recovery itself, other recoveries ignore asserts checks (I guess).
can you post some images of touch version? If it's really resolution problem maybe we can contact Koush about it.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Ofcourse, the recovery has been tested but whatever happens on your device will not be held against the developer.
What Is CWM Recovery ?
CWM recovery is a way that enables you to falsh a custom rom , customize your rom and can save you from bad situations. To Be fully in controll of your android device you need a recovery and this is one of them.How To Install CWM Recovery ?
There are 2 methods for installing CWM
1.Method (dd method)
You need root before you continue.
now copy recovery.img from second post to your sd card and :
1.On PC :
Make shure that device is on usb debugging mode.
Plug device and open Terminal/command prompt.
Copy Pasta the Following Commands :
PHP:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
2.On Phone :
First Download Terminal Emulator From Play Store.
Plug device and open Terminal apk
Right the Following Commands :
PHP:
su (you need root acess for it )
Then
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !(guys with fat fingers stay away !)
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
Second Method Is Via ODIN.
First Download ODIN
Now Download the GT-I9500-CWM-6.0.X.X.tar From Second Post and put it in same directory as odin.
Go To Download Mod (Volume Down +Home+Power) and plug device.
Now in Odin You Will see {added} and a light blue figure on top that means that device has been recognized if you dont get them uninstall devices drivers and retry.
Now click PDA and select GT-I9500-CWM-6.0.X.X.tar And Then Click Start .
After Device reboots Your Done and CWM Is Flashed.
Third method is flashing via recovery .
It does not matter if you are on stock recovery or custom recovery .
First of all download from second post GT-I9500-CWM-6.0.X.X.zip .
Then put it on sdcard .
Then Flash it .
Enjoy your new recovery.Thanks To :
CM Team For CWM recovery .
@Dees_Troy @bigbiff @anders3408 @cybojenix {These Guys Are The Best And I Thank Them for helping me every step in the way and nut thinking that i am a nut job }
Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
Downloads :
1.GT-I9500-CWM-6.0.4.6.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.6.tar Build #1 {For Odin}
1.GT-I9500-CWM-6.0.4.5.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.5.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.5.zip [For Third Method]
1.GT-I9500-CWM-6.0.4.4.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.4.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.4.zip {For third method}
Change Log :
Build #1 Fully Working.Whats To Do In Future Build ?
Enable Touch .
Add OTG Support.FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
For later use
Attachment.??
Disturbed™ said:
Attachment.??
Click to expand...
Click to collapse
Second post , sorry i took me long enough because of my bad internet
S.a.M.e.R_d said:
Second post , sorry i took me long enough because of my bad internet
Click to expand...
Click to collapse
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.
Disturbed™ said:
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.
Click to expand...
Click to collapse
after a precision timing it took me 7. 43 minutes for 5.23 gb of data
Works well, thanks.
will this work on leak 4.3 tq
kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
Yes probably , as i compiled CWM with android 4.3.1 source
Sent from my GT-I9500 using XDA Premium 4 mobile app
kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app
Degrated Shadow said:
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
no its working :good::good::good:
kishen80 said:
no its working :good::good::good:
Click to expand...
Click to collapse
yes i can confirm. i just did a backup and restore. its freaking good. i am sticking to this recovery.
subscribing now.
Hi,
Please make ZIP version to istall from other recovery
Thanks
Do we have a CWM flashable package?
i made a zip but it will not work from first flashh dunno why , i will try and report back.
mateen5997 said:
Hi,
Please make ZIP version to istall from other recovery
Thanks
Click to expand...
Click to collapse
rl421403 said:
Do we have a CWM flashable package?
Click to expand...
Click to collapse
Done Check Second Post.
S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks. Just grabbed.
Sent from my Galaxy S4
S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks
Hi Samered, cwm file zip is corrupted, please make another one, thanks
Sent from my GT-I9500 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since, no one had ported so I though of porting it .
Procedure:
-- Copy the downloaded recovery.img to your
ADB folder
-- Turn off your phone
-- Boot into fastboot mode by pressing power
button and volume down keys together for
sometime.
-- After sometime when it gets stuck at the logo,
connect your phone to PC using USB cable
-- If you are in WinXP, open command prompt
and browse to your ADB folder using cd
commands.
If you are in Windows7, right click in the ADB
folder and click to open command prompt there.
-- Type this in the command prompt :
Code:
fastboot devices
This should display your device name in fastboot
mode, if nothing is shown, then you have to
check previous steps again.
-- Type this command to flash CWM recovery to
your phone
Code:
fastboot flash recovery recovery.img
It will show the progress and completion dialogue
within seconds when it finishes successfully. Now
you can try if CWM is working.
-- Remove battery of your phone and reinsert.
-- Press Power and Volume Up key to boot into
recovery mode.
-- You should see CWM now, otherwise try
flashing again
Thats it!! Congrats
Alternative method :
Use Mobileuncle MTK tool to flash it
https://play.google.com/store/apps/...le&utm_medium=organic&utm_term=mtk+uncle+tool
I don't have a device so haven't tested yet . Reply if it works .
CWM Link : http://www.4shared.com/file/POqi0ZMa/recovery.html
changed the cwm rebuilt it should be bugged fixed
Stock : http://www.4shared.com/file/P-9Q19nH/recovery.html
Sent from my GT-S7500 using xda app-developers app
thank for cwm i have try but it didn't working for ....
manz36 said:
thank for cwm i have try but it didn't working for ....
Click to expand...
Click to collapse
yup sory I uploaded the stock by mistake soon gonna upload the cwm
Thanks
Lindsay02 said:
Thanks
Click to expand...
Click to collapse
Welcome please click thanks if it was helpful to you..
manz36 said:
thank for cwm i have try but it didn't working for ....
Click to expand...
Click to collapse
upload the cwm check if it works. and send me screens if it those
DayanGts7500 said:
-- Copy the downloaded recovery.img to your
ADB folder
Click to expand...
Click to collapse
DayanGts7500, please pardon my naively daft question, but with reference to ADB, you mean the Android SDK, which is found at, http://developer.android.com/sdk/index.html, right?
Should I download the ADT Bundle, or SDK Tools Only, for my respective platform?
I await your response, and I thank you for your patience.
YLNdroid said:
DayanGts7500, please pardon my naively daft question, but with reference to ADB, you mean the Android SDK, which is found at, http://developer.android.com/sdk/index.html, right?
Should I download the ADT Bundle, or SDK Tools Only, for my respective platform?
I await your response, and I thank you for your patience.
Click to expand...
Click to collapse
Actually I ment the minimum abd and fastboot tool by shimp207 because of its small size
i used terminal emulator for flashing this recovery use command "dd if=/sdcard/cwmrecovery.img of=/dev/block/mmcblk0p13”
i have try it ... the screen is still blank but the cwm is working.... i dont know whats is wrong?
manz36 said:
i used terminal emulator for flashing this recovery use command "dd if=/sdcard/cwmrecovery.img of=/dev/block/mmcblk0p13”
i have try it ... the screen is still blank but the cwm is working.... i dont know whats is wrong?
Click to expand...
Click to collapse
I didn't got what you said. about blank.. is it working I.e you can flash , backup ,mount , wipe battery stat etc .
DayanGts7500 said:
I didn't got what you said. about blank.. is it working I.e you can flash , backup ,mount , wipe battery stat etc .
Click to expand...
Click to collapse
the display screen is black when its on cwm.. im sure cwm is working when i touch power button the phone restart.. first option on the cwm on top ussualy for reboot the device..
its same with several recovery that i have port it ... and i dont know why the display going to blank when its on cwm mode
manz36 said:
the display screen is black when its on cwm.. im sure cwm is working when i touch power button the phone restart.. first option on the cwm on top ussualy for reboot the device..
its same with several recovery that i have port it ... and i dont know why the display going to blank when its on cwm mode
Click to expand...
Click to collapse
ok thanks I will try to fix it .
Please help
please help us to port cwm to any new devices
I own device canvas doodle
I tried a lot of it but not able to do as lack of information, resources, help
If I want to port cwm or any rom to my device, hot to do it
pls tell us
from creating developing environment to successfully porting
pls help
pls post on this topic
pls pls
pls
pls help us to teach to port cwm and other things to newer android devices which are in lack of sources
thank you for your work
it gives black screen
Tushargoyal said:
please help us to port cwm to any new devices
I own device canvas doodle
I tried a lot of it but not able to do as lack of information, resources, help
If I want to port cwm or any rom to my device, hot to do it
pls tell us
from creating developing environment to successfully porting
pls help
pls post on this topic
pls pls
pls
pls help us to teach to port cwm and other things to newer android devices which are in lack of sources
thank you for your work
it gives black screen
Click to expand...
Click to collapse
I had rebuilt it check the new version this should work changed the link
manz36 said:
the display screen is black when its on cwm.. im sure cwm is working when i touch power button the phone restart.. first option on the cwm on top ussualy for reboot the device..
its same with several recovery that i have port it ... and i dont know why the display going to blank when its on cwm mode
Click to expand...
Click to collapse
check this one this should work . replaced the link.
i have try it ... it stuck on display logo and dont go to cwm mode... i think the first one its working but it has display problem
manz36 said:
i have try it ... it stuck on display logo and dont go to cwm mode... i think the first one its working but it has display problem
Click to expand...
Click to collapse
the problem is that I don't have the graphics source file. I.e graphics.c so there isn't any display.
DayanGts7500 said:
the problem is that I don't have the graphics source file. I.e graphics.c so there isn't any display.
Click to expand...
Click to collapse
that was the case with me too, i have compiled cwm thrice but none of them showed display. btw they booted because after flashing cwm i got clockworkmod folder on sdcard automatically.
abhinav2hd said:
that was the case with me too, i have compiled cwm thrice but none of them showed display. btw they booted because after flashing cwm i got clockworkmod folder on sdcard automatically.
Click to expand...
Click to collapse
yup you need the graphics source file .
DayanGts7500 said:
yup you need the graphics source file .
Click to expand...
Click to collapse
hey cwm works fine can u help me in making custom rom ???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Of course, the recovery has been tested but whatever happens on your device will not be held against the developer.
What Is CWM Recovery ?
CWM recovery is a way that enables you to flash a custom rom , customize your rom and can save you from bad situations. To Be fully in control of your android device you need a recovery and this is one of them.
CM Nightlies install with no problems.
How To Install CWM Recovery ?
Only DD method
You need to be rooted before you continue.
1. Copy recovery.img to the root of your internal sdcard and choose either method below
a.Via PC :
Make sure that your device is on usb debugging mode (also ensure you have Samsung adb drivers installed).
Plug your device in your notebook/pc and open Terminal/CMD.
Copy and Paste the Following Commands :
PHP Code:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make sure that the partition is mmcblk0p10 or you will brick your device !
now you can reboot to recovery (volume up + home +power) or type reboot recovery via Terminal or CMD and enjoy CWM 6.0.4.7
2.On Phone :
First Download Terminal Emulator From the Play Store.
Start Terminal,
Type the Following Commands :
PHP Code:
su (you need root acess for it )
Then
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make sure that partition is mmcblk0p10 or you will brick your device !(guys with fat fingers stay away, use your pc !)
now you can reboot to recovery (volume up + home +power) or type reboot recovery via Terminal and enjoy CWM 6.0.4.7
Thanks To :
CM Team For CWM recovery .
@intervigil @Alberto96 @Faryaab @Koush {Without them recovery would not be here for our device }
Downloads :
Updated 6.0.4.8 Touch Recovery.img (Tested and Verified)
Recovery.img
Touch Recovery.img (Tested and Verified)
Recovery.img
Regular Recovery.img (Didn't Test but 100% SURE IT WORKS)
Recovery.img
Change Log :
Build #2 Version Update
Build #1 Fully Working.
FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .
Please at least Hit The Thanks Button
PM ME if Links are dead
Touch version confirmed OK. Thanks OP
Sent from my GT-I9500 using Tapatalk
Here is Odin Flashable tar.md5 file. Unrar and flash GT-I9500-CWM-6.0.4.7.tar.md5 file via AP for odin.
Thanks alvin14
guys i have the twrp recovery installed right now.. and im on a mac.. so will the adb method work fine? or do i only do it via odin? thanks a lot!
androidindian said:
guys i have the twrp recovery installed right now.. and im on a mac.. so will the adb method work fine? or do i only do it via odin? thanks a lot!
Click to expand...
Click to collapse
you can try both.
For those who use Mac… don't like to use Odin out of fear of retribution from Scandinavian deities or are scared to typo mmcblk0p10 and brick their S4...
Download the CWM / TWRP flashable ZIP for the touch recovery here...
Packed by myself, tested and working on my phone... Thanks to alvin14 for the recovery.img.
http://d-h.st/ahU
or attached...
stassano said:
For those who use Mac… don't like to use Odin out of fear of retribution from Scandinavian deities or are scared to typo mmcblk0p10 and brick their S4...
CWM / TWRP flashable linked for the touch recovery.
Packed by myself, tested and working on my phone... Thanks to alvin14 for the recovery.img.
http://d-h.st/ahU
or attached...
Click to expand...
Click to collapse
awesome thanks a lot mate! ive been on twrp and flashed the 6.0.4.5 from the other thread the phone blacks out.. so was wondering if adb method would work, but will try the file you have given now thanks mate..
androidindian said:
awesome thanks a lot mate! ive been on twrp and flashed the 6.0.4.5 from the other thread the phone blacks out.. so was wondering if adb method would work, but will try the file you have given now thanks mate..
Click to expand...
Click to collapse
Let us know if it worked for you from TWRP... I flashed from CWM 6.0.4.4.
Can somebody confirm if restore works fine?
Earlier version was fiving fc after the restore. And you will have to factory reset it.
It works just fine...
Sent from my GT-I9500 using Tapatalk
Thanks
I'm not getting an md5/tar file, I'm getting a recovery.img file? What do i do?
When I Try Flashing Rom, It's Say Aborted Error 7. When Im Flashing Roms. Like Wanam,Legend.
Then Im Flashing Cm11 It Works. I had to Downgrade My Recovery To 6.0.4.5 To Flash My Rom Back.
Drasztic said:
I'm not getting an md5/tar file, I'm getting a recovery.img file? What do i do?
Click to expand...
Click to collapse
Use DD method. Haven't downloading that method to test from the user that uploaded it.
Sent from my GT-I9500 using Tapatalk
[recovery][gt-i9500]cwm 6.0.4.7 *everything works*
SiNxHaCk said:
When I Try Flashing Rom, It's Say Aborted Error 7. When Im Flashing Roms. Like Wanam,Legend.
Then Im Flashing Cm11 It Works. I had to Downgrade My Recovery To 6.0.4.5 To Flash My Rom Back.
Click to expand...
Click to collapse
I think that's probably a ClockWorkMod thing. Or the specific ROM. Have no problems at all with ROMS. Especially Wanam.
Sent from my GT-I9500 using Tapatalk
citymen34 said:
Here is Odin Flashable tar.md5 file. Unrar and flash GT-I9500-CWM-6.0.4.7.tar.md5 file via AP for odin.
Thanks alvin14
Click to expand...
Click to collapse
Many Thanks alvin14 and citymen34 for the tar. Working like a Charm! Kind Regards
Works smooth on my i9500 with the official kitkat. Thanks.
Works great with CM11 OTA updates!:good:
Edit: recovery works perfectly...
Thanks...
Sorry I did say It's working like a Charm but after restoring from a backup I'm getting FC's on stock 4.4.2 Russian & Thiland updates, Any ideas!
BTW, on Official Cm11 4.4.2 with CWM I have no problems Restoring. Please can you tell me from where the sourse code was taken. Many Thanks & Kind Regards!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In this thread, i would like to share tutorial about How to install CWM Recovery and rooting Samsung Galaxy V SM-G313HZ. But you can also use TWRP Recovery if you do not like CWM and then rooting by following this guide.
Requirement :
PC/Laptop/Netbook.
Odin3 v3.09.
CWM_Vivalto_v6.0.3.7_Build#3_(ODIN_VERSION).zip.
UPDATE-SuperSU-v1.94.
USB Cable.
Brain.
Click to expand...
Click to collapse
Installing CWM :
Extract odin and CWM_Vivalto_v6.0.3.7_Build#3_(ODIN_VERSION).zip in the same folder
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until detected on Odi
Add the recovery.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Wait until the flashing process is complete
Click to expand...
Click to collapse
Rooting :
Copy UPDATE-SuperSU-v1.94.zip to External SD.
Go to CWM.
Install zip -> from sdcard.
Choose UPDATE-SuperSU-v1.94.zip and wait untill finished.
Reboot system now.
If there is notif "fix supersu blablabla" just press "back" button.
Click to expand...
Click to collapse
Screenshot :
Changelo CWM build #3
- Change the HOME BUTTON as selector menu
Bug :
can not install zip, backup/restore from/to internal sd.
Old version
Special thanks to Allah SWT.
Credits :
Cleverior
Riskey95
CyanogenMod
And you
are this tutorial really work. i want to try it but i dont know how to unbrick this device when the tutorial doesnt work out.
Lemon_Lime`s said:
are this tutorial really work. i want to try it but i dont know how to unbrick this device when the tutorial doesnt work out.
Click to expand...
Click to collapse
forry for the late reply..
ofcourse this tutorial is really works. look at the screenshot.
What are the changes in build 2? Backup/restore working fine?
cleverior.ipul said:
forry for the late reply..
ofcourse this tutorial is really works. look at the screenshot.
Click to expand...
Click to collapse
thanks for reply .. i will try this out ..
adriansticoid said:
What are the changes in build 2? Backup/restore working fine?
Click to expand...
Click to collapse
fix resolution of CWM. Backup/restore also working fine. I've tested.
Some of the things I noticed:
1. Home button is functioning the same as volume buttons. I think it should function like the power button to select items.
2. White screen when entering recovery.
3. At the bottom it says warning about context files?
4. When rebooting it says root possibly lost. I think it should be rebooted once reboot system is selected.
Maybe it's just me because I got used to CWM in Galaxy Y. Anyway, huge thanks to you. I hope to see more for this device like custom ROMs, kernels, etc. Goodluck.
adriansticoid said:
Some of the things I noticed:
1. Home button is functioning the same as volume buttons. I think it should function like the power button to select items.
2. White screen when entering recovery.
3. At the bottom it says warning about context files?
4. When rebooting it says root possibly lost. I think it should be rebooted once reboot system is selected.
Maybe it's just me because I got used to CWM in Galaxy Y. Anyway, huge thanks to you. I hope to see more for this device like custom ROMs, kernels, etc. Goodluck.
Click to expand...
Click to collapse
1. Maybe will be fixed on the build.
2. I think that isn't big problem.
3. And this is also not big problem.
4. Maybe will be fixed on the build.
Galaxy Y Gen 1 or 2 ?
cleverior.ipul said:
1. Maybe will be fixed on the build.
2. I think that isn't big problem.
3. And this is also not big problem.
4. Maybe will be fixed on the build.
Galaxy Y Gen 1 or 2 ?
Click to expand...
Click to collapse
It's GT-S5360 so I think it's gen 1. It is now sold and I bought a Galaxy V. The CWM in Galaxy Y is almost the same as Galaxy Pocket. I hope there are other devs who also have this device.
This actually works! Too bad it can't be used with Internal Storage...
But using wih sdcard and CWM magically works like charm.. Can mount everything.. Great job dev!
adriansticoid said:
It's GT-S5360 so I think it's gen 1. It is now sold and I bought a Galaxy V. The CWM in Galaxy Y is almost the same as Galaxy Pocket. I hope there are other devs who also have this device.
Click to expand...
Click to collapse
Android version of galaxy y gen 1 is different than galaxy v. Version of recovery also different.
Little Zed said:
This actually works! Too bad it can't be used with Internal Storage...
But using wih sdcard and CWM magically works like charm.. Can mount everything.. Great job dev!
Click to expand...
Click to collapse
good to hear that. please hit the thanks button
OLD Version
CWM 6.0.3.7 Build #2
Changelog :
Fix resolution CWM
Link :
CWM_Recovery_build2.zip (odin version)
[URL="http://www.mediafire.com/download/uh7u9tnh6hc8hre/zz_CWM_Vivalto_Build#2.zip"]zz_CWM_Vivalto_Build#2 (flashable version)[/URL]
CWM 6.0.3.7 Build #1
Changelog :
First build
Link :
CWM_Recovery_v6.0.3.7_Vivalto.zip
cwm updated
Can I flash the build3 using Flashify or Rashr? Or can you make the update flashable? Sorry for the request. I don't have PC. And for some physical problems, I can't go to a computer shop. Thanks.
adriansticoid said:
Can I flash the build3 using Flashify or Rashr? Or can you make the update flashable? Sorry for the request. I don't have PC. And for some physical problems, I can't go to a computer shop. Thanks.
Click to expand...
Click to collapse
here bro
This method worked perfectly to root my Samsung Galaxy Ace 4 Lte (SM-G313ML)
Thanks for sharing it!
garyo said:
This method worked perfectly to root my Samsung Galaxy Ace 4 Lte (SM-G313ML)
Thanks for sharing it!
Click to expand...
Click to collapse
u're welcome. glad to hear that. and dont forget to read my signature.. hehehe
i do as your guide.but my phone can't flash zip supersu v1.4.help me please.my phone is sm-g313hz
---------- Post added at 07:23 AM ---------- Previous post was at 07:12 AM ----------
https://lh5.googleusercontent.com/-.../EGSoSIEbIAk/w769-h577-no/20150221_071533.jpg
https://lh4.googleusercontent.com/-.../B6WUa4XlPu4/w433-h577-no/20150221_071422.jpg
https://lh4.googleusercontent.com/-.../DuQBg0dWOTg/w769-h577-no/20150221_071525.jpg
danbin said:
i do as your guide.but my phone can't flash zip supersu v1.4.help me please.my phone is sm-g313hz
---------- Post added at 07:23 AM ---------- Previous post was at 07:12 AM ----------
https://lh5.googleusercontent.com/-.../EGSoSIEbIAk/w769-h577-no/20150221_071533.jpg
https://lh4.googleusercontent.com/-.../B6WUa4XlPu4/w433-h577-no/20150221_071422.jpg
https://lh4.googleusercontent.com/-.../DuQBg0dWOTg/w769-h577-no/20150221_071525.jpg
Click to expand...
Click to collapse
that is stock recovery. not CWM. try to reflash ur phone to stockrom thru odin and reflash cwm/twrp.
can you send link to me CWM/twrp?because i do as your guide.but it can't flash.thanks
url=http://postimage.org/]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url]
photo hosting sites
Hello World. This is official version of TWRP recovery for SM-G355HN
http://teamw.in/devices/samsunggalaxycore2.html
And tested for SM-G355H TWRP 3.0.0-0 :
http://forum.xda-developers.com/showpost.php?p=65784717&postcount=130
disclaimer:
I/XDA/higher power/is not responsible for any kind of damage to your device,
or in case it explodes, nuclear war etc.
Please use it at your own risk! Whatever you do with your phone it's your own choice!
Click to expand...
Click to collapse
Requirement :
1. PC/Laptop/Netbook.
2. Odin3 v3.09 or any other
3. odin_recovery.tar.md5.V_3.0.0.0.zip
4. Samsung USB Driver
5. USB Cable.
Click to expand...
Click to collapse
How to install for ODIN:
1. Install Samsung USB Driver on your PC/Laptop or something else
2. Extract odin and odin_recovery.tar.md5.V_3.0.0.0.zip in the same folder
3. Open Odin
4. Reboot phone in Download Mode by pressing and hold Home + Power + Volume Down buttons)
5. Connect phone and wait until detected on odin
6. Add the recovery.tar.md5 file to AP / PDA
7. Make sure re-partition is NOT ticked
8. Click the start button, sit back and wait a few minutes
9. Wait until the flashing process is complete
Click to expand...
Click to collapse
How to go recovery for installing flashable zip:
1. Turn off you phone
2. Press and hold together Volume up + Home + Power buttons until phone vibrate then let go.
3. Now you are in recovery mode.
4. Select install TWRP_SM-G355HN_3_0_0_0.zip
Click to expand...
Click to collapse
Warning:
Please do not try to repartition ext-sd with twrp because I didn't get that far. If you really need that use your PC and micro usb adapter.
Credits goes to:
- TeamWin
- OmniROM (for bootable recovery)
- CyanogenMod (for sources)
- Me
- And all who contributed
My sources on github who want to contribute:
https://github.com/Y300-0100/twrp_android_device_samsung_kanas3gnfcxx
XDA:DevDB Information
TWRP Recovery V2.8.1.0, Tool/Utility for the Samsung Galaxy Core
Contributors
Y300-0100,
Version Information
Status: Stable
Created 2015-01-09
Last Updated 2015-05-18
changes:
- updated to 3.0.0-0
- updated to 2.8.7.0
- MTP function while in recovery stable?? ( samsung have issue with this)
- fixed minor errors
Updates
For those who don't have pc to flash recovery via odin and if they not sure if new one will work must have installed android terminal.
https://play.google.com/store/apps/d...al.androidterm
To back up current recovery type in terminal next:
Code:
su
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery.img
and check is your recovery on your internal storage.
To flash it back type next:
Code:
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
No reboot required.
__________________________________________________________
For ODIN use recovery files are attached.
wooooooooooooooow , very goood job brother
the next task must be porting cm 12
sry for my bad english
SMCORE2 said:
wooooooooooooooow , very goood job brother
the next task must be porting cm 12
sry for my bad english
Click to expand...
Click to collapse
As I said before we need team for that. So...
Y300-0100 said:
As I said before we need team for that. So...
Click to expand...
Click to collapse
Ahhh ok , cuz i read ur comment just now so , im sorry
I have been doing some research about important backup of samsung files so I found that backup of EFS is very important because it's folder contains
Phone-specific information such as the IMEI, wireless devices MAC addresses, product code, and much more. If this thing not handled properly, can turn your device completely useless as it will no longer be recognized by your carrier.
Problem is, flashing custom ROMs sometime can corrupt contains within EFS folder. That’s why backing up EFS folder is very important if you love to flash new ROM.
Click to expand...
Click to collapse
So I will include that as backup option.
Also same thing with modem looking at twrp github for samsung devices so I will add that to. And my opinion maybe not wise but I think that recovery also need to be included in backup.
That's my 5 cents
Anyone to back me up or to add 5 cents more
Nice work!
Keep it up
Data app 2 ext-sd is possible
picture share
But use pc to partition sd as ext4. I would't like you to screw something. google first how to
And 2nd post updated.
Good job . After last update what is not working now
Sent from my SM-G355H using XDA Free mobile app
younis12c said:
Good job . After last update what is not working now
Sent from my SM-G355H using XDA Free mobile app
Click to expand...
Click to collapse
as
Y300-0100 said:
added
What is left to be done:
- mount as usb/mtp in recovery
- backup cache
Click to expand...
Click to collapse
Some impressions, comments and suggestions would be nice. Because I don't know am I doing this right at all
First of all.. Thanks for your hard work on our SGC2 recovery!
I hope with this, SGC2 has it's own forum as soon as possible
Btw. I confirmed this working for samsung galaxy core 2 duos (G355H) as well
everything looks fine.. touch screen working, but I haven't touched any feature aside from reboot to system which was working
but i believe everything should be working fine
you should change the thread name as your recovery support G355H too :good:
good work bro
---------- Post added at 01:34 PM ---------- Previous post was at 01:04 PM ----------
@Y300-0100 : what version of omnirom you use to build this twrp ? based on kitkat or lollipop ?
cleverior.ipul said:
good work bro
---------- Post added at 01:34 PM ---------- Previous post was at 01:04 PM ----------
@Y300-0100 : what version of omnirom you use to build this twrp ? based on kitkat or lollipop ?
Click to expand...
Click to collapse
Only omni bootable recovery 4.4 and rest is CM-11.
No need to root the device?(Samsung Galaxy Core 2 DUOS)
novhexzhen said:
No need to root the device?(Samsung Galaxy Core 2 DUOS)
Click to expand...
Click to collapse
I don't know. I rooted my phone before twrp but as I recall twrp detect that phone is not rooted and it should install su binary and apk after confirmation and restart.
Btw is it possible to add aroma file manager or something else in TWRP as permanently feature just like in CWM?
giew13 said:
Btw is it possible to add aroma file manager or something else in TWRP as permanently feature just like in CWM?
Click to expand...
Click to collapse
No. What's wrong with current file manager? It's not working?
Works AWSOME bro, great job!!!! THANKS
Y300-0100 said:
I don't know. I rooted my phone before twrp but as I recall twrp detect that phone is not rooted and it should install su binary and apk after confirmation and restart.
Click to expand...
Click to collapse
thanks matey. i will try this later if there is an available feedback from unrooted phones who install TWRP:good:
Y300-0100 said:
No. What's wrong with current file manager? It's not working?
Click to expand...
Click to collapse
Oh is there already exist
sorry i haven't check it. This is my first device that using TWRP recovery