Database Info

Install official JB on p6800

Hello!
In this tutorial, I will tell you how to install the official Jelly Bean on Samsung Galaxy Tab 7.7.
Do this on your own risk. I am not responsable for anything wrong that happen to your device. It is only working for the P6800 (WiFi + 3G edition). You will also lose your warranty. I have just tested upgrading from official ICS to official Jelly Bean.
Downloads:
First you will need to download the stock ROM from here: Click here
(Thailand edition but English Language).
Download ODIN from here: Click Here
Also make sure to have the Samsung Drivers installed.
NB: You may lose all of your data on your device. Make sure to have a backup.
Installation
1. Unpack the files you have just downloaded.
2. Turn off your device and boot into download mode (by holding arrow up and the powerbutton).
3. Connect you device (in download mode) to the computer via a USB cable.
4. Launch ODIN.exe and click on the PDA button.
4. Select the stock ROM (yourfilename.tar.md5)
5. Make sure autoreboot and F. reset time is checked in ODIN.
6. Click on START.
7. Wait until the installation is completed.
8. Your device will now reboot.
9. Finished! :cyclops:
Sorry for bad English skills...
Changes
New Nature TouchWiz UX
Google Now
New Notification Panel
Smoother UI (Project Butter)
New Samsung Cloud Service
Blocking Mode
New Lockscreen
Readers Hub, Music Hub, Video Hub, Group Cast
New widgets like AccuWeather and Music Hub
Many others…
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

will this work on the i815?

rEVOLVE said:
will this work on the i815?
Click to expand...
Click to collapse
No, you will BRICK your device flashing incorrect firmware.

You must mention on topic "it's only for p6800 right now" some people don't like read before act.
Thanks for your tut

No, it wont...
rEVOLVE said:
will this work on the i815?
Click to expand...
Click to collapse
No, it wont work...

Does anybody know if this ROM comes with Portuguese language?
Thank's
Alfredo
Sent from my GT-I9505 using xda premium

And remember to check repartition and well in odin
Sent from my GT-P6800 using xda app-developers app

Can install on Hong Kong versision?
Hello,
I just wanted to know if released South Asia countries JB is fully copatible with the P6800 bought from HK.
Thanks

samaliset said:
Hello,
I just wanted to know if released South Asia countries JB is fully copatible with the P6800 bought from HK.
Thanks
Click to expand...
Click to collapse
Yes its compatible.
Sent from my GT-N7100 using Tapatalk 4 Beta

edan1979 said:
Yes its compatible.
Sent from my GT-N7100 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Good and thanks.

Another question please is this rom includes root?
OK I got the answer since I just comlpete the update.
2 things I still searching for, the weatwher widget and the battery percentage settin. I could not find any thing there.
Any help please.
Other wise the ROM is very fast no lag and I found all my apps and setting execpt above note.

there's suppose to be stock weather widget. acuweather
for bat percentage. you can look at setting->display->show battery percentage.
or if you root the device... can go to apps section... there lots of themes made by ssaass for JB

Hotspot
edan1979 said:
there's suppose to be stock weather widget. acuweather
for bat percentage. you can look at setting->display->show battery percentage.
or if you root the device... can go to apps section... there lots of themes made by ssaass for JB
Click to expand...
Click to collapse
A new issue I did find.
I used to share my 3G connection through Hotspot. Utility under Icecream. Since I updated to JB my phone (Samsung SII) can't find the hotspot after typing the password.
Any helps please.
Thanks
Ok, solved.

Can i flash this on 6810 wifi only model?
Can i flash this on 6810 wifi only model?
henricson said:
Hello!
In this tutorial, I will tell you how to install the official Jelly Bean on Samsung Galaxy Tab 7.7.
Do this on your own risk. I am not responsable for anything wrong that happen to your device. It is only working for the P6800 (WiFi + 3G edition). You will also lose your warranty. I have just tested upgrading from official ICS to official Jelly Bean.
Downloads:
First you will need to download the stock ROM from here: Click here
(Thailand edition but English Language).
Download ODIN from here: Click Here
Also make sure to have the Samsung Drivers installed.
NB: You may lose all of your data on your device. Make sure to have a backup.
Installation
1. Unpack the files you have just downloaded.
2. Turn off your device and boot into download mode (by holding arrow up and the powerbutton).
3. Connect you device (in download mode) to the computer via a USB cable.
4. Launch ODIN.exe and click on the PDA button.
4. Select the stock ROM (yourfilename.tar.md5)
5. Make sure autoreboot and F. reset time is checked in ODIN.
6. Click on START.
7. Wait until the installation is completed.
8. Your device will now reboot.
9. Finished! :cyclops:
Sorry for bad English skills...
Changes
New Nature TouchWiz UX
Google Now
New Notification Panel
Smoother UI (Project Butter)
New Samsung Cloud Service
Blocking Mode
New Lockscreen
Readers Hub, Music Hub, Video Hub, Group Cast
New widgets like AccuWeather and Music Hub
Many others…
Screenshot:
Click to expand...
Click to collapse

vijay.alapati said:
Can i flash this on 6810 wifi only model?
Click to expand...
Click to collapse
No
Sent from my GT-I9500 using xda premium

Compatibility Question
edan1979 said:
Yes its compatible.
Sent from my GT-N7100 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Edan,
Is there some way to tell if a Galaxy Tab 7.7 would NOT be compatible with the Thai ROM under discussion?
I'm not sure WHERE my Tab 7.7 came from because I got it through a world re-seller.
Thanks

Laggy performance
Hello there..
I was on stock ICS.. i installed the stock JB and the performance was very laggy even worse than Honeycomb, i was advised to backup my apps via titanium backup, wipe cache and date from the cwm recovery and restore my apps again. I successfully did that and the performance was a bit better but lots of apps crash and restart, the biggest problem is when i open any app specially a web browser then go to home screen or use another app for a while and get back to the browser again its like i open it from the beginning "the browser tabs reloaded and if a game it restarts".. This problem was on honeycomb and was solved by installing Go Launcher and was fully solved by installing the ICS.. Is there a solution for the JB?

onepiece said:
Edan,
Is there some way to tell if a Galaxy Tab 7.7 would NOT be compatible with the Thai ROM under discussion?
I'm not sure WHERE my Tab 7.7 came from because I got it through a world re-seller.
Thanks
Click to expand...
Click to collapse
check at the setting about device... and look at the model... if its state there 6800. then it will be compatible. no matter where the device origin... the only different of each region release are the content/bloarware from local telco and language support. other than that the device are basically using the same firmware.

Hi,
Can this version display Chinese and type Chinese?
Thanks,

[Q] JBX on Mokee 4.4.2

Hi guys, i have problems with jbx on mokee rom, after unlocking the screen, it doesn't work but buttons on the bottom panel are glowing. I've tried all versions for 4.4.2.

Pikachu8119 said:
Hi guys, i have problems with jbx on mokee rom, after unlocking the screen, it doesn't work but buttons on the bottom panel are glowing. I've tried all versions for 4.4.2.
Click to expand...
Click to collapse
Try the latest 18/2 build..works fine
Sent from my MB865 using Tapatalk 2

devilhunter47 said:
Try the latest 18/2 build..works fine
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
i've tried it today

Pikachu8119 said:
i've tried it today
Click to expand...
Click to collapse
There's a 19/2 build up now
Sent from my MB865 using Tapatalk 2

devilhunter47 said:
There's a 19/2 build up now
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
and i forgot to say, that i dont have signal and memory card is not working
EDIT: installed version from 02-20d, and now i have only the screen issue

Pikachu8119 said:
and i forgot to say, that i dont have signal and memory card is not working
EDIT: installed version from 02-20d, and now i have only the screen issue
Click to expand...
Click to collapse
Change the minimum frequency to 300 in trickster mod

Super_Commando said:
Change the minimum frequency to 300 in trickster mod
Click to expand...
Click to collapse
Thank you, i downloaded sr-fixed version, but battery life isn't as good as people said in the main theme of jbx.

Pikachu8119 said:
Thank you, i downloaded sr-fixed version, but battery life isn't as good as people said in the main theme of jbx.
Click to expand...
Click to collapse
Try Shurikkb 21/2 build
Sent from my MB865 using Tapatalk 2

devilhunter47 said:
Try Shurikkb 21/2 build
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
battery life isn't good too, installed shurik's 02-21a

I'm on Mokee 4.4 as well and have the same problem with latest JBX. It prevents me from getting carrier signal. i thought it was originally a problem with the liquidsmooth I was trying to install but when I tried applying it to Mokee it stopped my cell signal as well.

psymon stark said:
I'm on Mokee 4.4 as well and have the same problem with latest JBX. It prevents me from getting carrier signal. i thought it was originally a problem with the liquidsmooth I was trying to install but when I tried applying it to Mokee it stopped my cell signal as well.
Click to expand...
Click to collapse
Check your APNs. If there's nothing under the APN settings try the "Reset to Default" option. If that doesn't work, you'll have to Google the APN settings for your service carrier and input them manually. Or, better still, if you can find the apns-conf.xml that is specifically for your carrier download that and install in /system/etc then set the permissions to rw-r--r-- and reboot.

psymon stark said:
I'm on Mokee 4.4 as well and have the same problem with latest JBX. It prevents me from getting carrier signal. i thought it was originally a problem with the liquidsmooth I was trying to install but when I tried applying it to Mokee it stopped my cell signal as well.
Click to expand...
Click to collapse
10% mod in JBX installer breaks your signal, and also your sdcard recognition
Untick that option

Pikachu8119 said:
battery life isn't good too, installed shurik's 02-21a
Click to expand...
Click to collapse
I installed Shurikkb 20c, it works fine for me.
then i try 2/25, battery life is not good.
so i revert back to 20c now

1BadWolf said:
Check your APNs. If there's nothing under the APN settings try the "Reset to Default" option. If that doesn't work, you'll have to Google the APN settings for your service carrier and input them manually. Or, better still, if you can find the apns-conf.xml that is specifically for your carrier download that and install in /system/etc then set the permissions to rw-r--r-- and reboot.
Click to expand...
Click to collapse
hmm not sure what i'm doing here. reset to default gave me no luck. After manually entering ATTs info and selecting save from the menu, no APN shows up in the 'list' i supposedly just populated with an entry. Searching for available networks also leaves the phone searching seemingly indefinitely, which would work just fine before installing the JBX. As far as copying an xml into that directory, not sure how to do that.
And as I was trying to use USB mass storage for it it won't work for me either. I'm gonna have to give up on the JBX kernal, time to find a non kexec to resolve these battery issues. thanks for trying.
PhoenixNghi said:
10% mod in JBX installer breaks your signal, and also your sdcard recognition
Untick that option
Click to expand...
Click to collapse
ah hah THANKS!
I'll try this.... and waiting 5 minutes for edit...
that's what did it. Thanks again, working now.
damn,,, looks like i'll have to drop it anyway, USB storage still wont work.

psymon stark said:
...............
damn,,, looks like i'll have to drop it anyway, USB storage still wont work.
Click to expand...
Click to collapse
CM 26-2 + JBX 27-2 and I have awesome battery life
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USB Mass storage is normal
You must do 2 steps to make UMS work: (swipe down from notification bar)
- Change to Mass storage
- Turn on usb storage
Anw, you can use Solid Explorer to send/receive your files with PCs in your network.

PhoenixNghi said:
CM 26-6 + JBX 27-2 and I have awesome battery life
USB Mass storage is normal
You must do 2 steps to make UMS work: (swipe down from notification bar)
- Change to Mass storage
- Turn on usb storage
Anw, you can use Solid Explorer to send/receive your files with PCs in your network.
Click to expand...
Click to collapse
Alright, I'll give that one a shot. Thanks.
When i was attempting to use the USB before I would bring up the dialog for it, then Click "turn on USB" then it would give the warning saying apps might not work, etc, then click ok to that and then it would engage. Witht eh JBX on mokee or liquid, clicking "turn on USB" would just sit there with the loading circle indefinitely.
Gonna hit up CM within the next day or so see how that goes.

PhoenixNghi said:
CM 26-2 + JBX 27-2 and I have awesome battery life
USB Mass storage is normal
You must do 2 steps to make UMS work: (swipe down from notification bar)
- Change to Mass storage
- Turn on usb storage
Anw, you can use Solid Explorer to send/receive your files with PCs in your network.
Click to expand...
Click to collapse
are you using battery friend?

4G doesn't work on my nexus 5

hi guys, hope you are fine.
the problem is the 4G doesn't work on my nexus 5, if i go to network settings i found that the LTE is active, the carrier network which i use, supports the 4G, and 4G coverage available, and the 4G bands are 1800 MHz and 800Mhz are supported by the phone and the carrier, but i only got the letter H ( mean 3G ), i took my phone to a technical and he said me that my phone needs a flash (ROM), but he said me that currently he haven't the ROM.
i hope that you can help me to make the 4G works on my nexus 5.
Thank you in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have the same problem but mine only connects to edge .. I called T_mobile and they gave me updated APN settings but nothing works ... Maybe it will for you. Contact your carrier and ask for the apn settings

Corneliusvinyo said:
I have the same problem but mine only connects to edge .. I called T_mobile and they gave me updated APN settings but nothing works ... Maybe it will for you. Contact your carrier and ask for the apn settings
Click to expand...
Click to collapse
thanks friend for your reply, the problem is not on apn settings because when i put the same apn settings on another phone supports 4G it's works, it's mean that the problem is not on the apn settings

Chouiyekh said:
thanks friend for your reply, the problem is not on apn settings because when i put the same apn settings on another phone supports 4G it's works, it's mean that the problem is not on the apn settings
Click to expand...
Click to collapse
Oh kk .. I just read it is software related ... I'm going to try downgrading to android 4.4 and see if it helps .. I'll let you know in a few hours if it works for me

Corneliusvinyo said:
Oh kk .. I just read it is software related ... I'm going to try downgrading to android 4.4 and see if it helps .. I'll let you know in a few hours if it works for me
Click to expand...
Click to collapse
ok friend, big thanks .. waiting the result

I have the same problem...

Aliastm1 said:
I have the same problem...
Click to expand...
Click to collapse
ohh, so i'm not the only one have the problem, hope this topic will be the solution

are you totally convinced that u support the bands ?

Chouiyekh said:
ok friend, big thanks .. waiting the result
Click to expand...
Click to collapse
didnt work . i dont know what to do know .. i hope someone has a fix soon.

luckana said:
are you totally convinced that u support the bands ?
Click to expand...
Click to collapse
yh I'm sure

Have u tried another sim card just to be sure it's not the phone itself
Sent from my Nexus 5 using Tapatalk

yes . I even tried my sim card in another nexus 5 and it works perfectly

luckana said:
are you totally convinced that u support the bands ?
Click to expand...
Click to collapse
yes friend, i'm sure

Corneliusvinyo said:
yes . I even tried my sim card in another nexus 5 and it works perfectly
Click to expand...
Click to collapse
yes i'm too
luckana said:
Have u tried another sim card just to be sure it's not the phone itself
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
yes friend i have tried before, and it's works on note 3 and phones that's supports 4G

Same problem here
I have the same problem, it is very frustrating.
The phone manages to connect to 4G, but there must be something missing as I don't get any data, sms or phone calls. There usually is a '!' next to the reception bars, it delivers nothing and I end up forcing it back down to 3G when it doesn't do it on it's own.
I am in Australia, and recently moved to a plan with 4G on the Vodafone network. The N5 should cover all those bands and the device is known to work well in these conditions.
I have always been running stock Android and have the same baseband version and build number than the OP. Same result on Android 6.0 and 6.0.1
The SIM delivers 4G with no problems when put in an iPhone 5. There is good coverage where I am.
Who to talk to?

Corneliusvinyo said:
yes . I even tried my sim card in another nexus 5 and it works perfectly
Click to expand...
Click to collapse
if it works in another nexus 5 then did u tried flashing that phone twrp backup to ur phone. also flash backed up radio.
whats ur nexus model D820 or D821 this may be the problem.

pradhyu69 said:
if it works in another nexus 5 then did u tried flashing that phone twrp backup to ur phone. also flash backed up radio.
whats ur nexus model D820 or D821 this may be the problem.
Click to expand...
Click to collapse
I have done all that multiple times .. it's a D820 .. I'm taking to a guy to see if its a problem with the motherboard

pradhyu69 said:
if it works in another nexus 5 then did u tried flashing that phone twrp backup to ur phone. also flash backed up radio.
whats ur nexus model D820 or D821 this may be the problem.
Click to expand...
Click to collapse
for me, i have D821 because i'm in Morocco

Corneliusvinyo said:
I have done all that multiple times .. it's a D820 .. I'm taking to a guy to see if its a problem with the motherboard
Click to expand...
Click to collapse
ok waiting the result ...

for me, i found the problem where, i have the D820 model i did not watch out for it when I bought it, because i'm from Morocco not USA so i need the D821 model then i will be able to connect to 4G
i hope to find a way to activate the bands 3 and 20 i will be able to connect to 4G

DISCONTINUED [ROM][AOH2][5.1.1]ToxicROM Note5 v1/S6 BETA G900V

This Is Important:
The lockscreen can not be used on this rom due to the inability to edit the kernel on our phones. I included a third part lockscreen app it may lock during setup just unlock it. This part is very important once the phone boots up go through setup when finished go directly to settings/lock screen and security and change lock screen type to none. Then open HILocker and set up the lockscreen or download a different one. If you try to use the stock lockscreen it will freeze phone upon reboot and you will have to start all over. Also I currently dont have my S5 activated so you will have to let me know if data and sms/mms work. This rom is considered in the Beta Stage so things may not work and may never work because of our locked bootloaders. Thanks @kxhan15 for doing some testing for me
BlackMesa & malbert16442 presents
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Give new life to your Galaxy S5!
Orginal Thread Here!
You are NOT allowed to use any part of this rom without permission of @BlackMesa123
Note5/S6 Port screenshot:
Android 5.1.1 Lollipop
Based on Galaxy Note5 firmware (N920CXXU1AOH2)
All Note5 Apps & frameworks working except Camera (S5 camera is used)
Debloated, Deknoxed, Deodexed, Rooted & BusyBox'd
Note5:
v1:
First Release
Note5/S6:
BETA R2:
Fixed My Files icon bug
Fixed Keyboard layout bug
Fixed White Square on Memo (flash new zip)
BETA:
First Beta Release
Based on Note5 port
Changed DPI from 420 to 480
Deleted all N5 Apps (S Note, Scrapbook etc...)
Changed all wallpapers with S6e+2 extra
Changed Audio and Launcher with S6e one
Changed build info, model etc... to SM-G925F COK5
Note5/S6:
Fingerprint and Lockscreen Must Use 3rd Party App
If you find one tell it to me with a PM.
Tested only on G900V
ROM Downloads:
ToxicROM_N5-S6_BETA_G900V_V6zip
@BlackMesa123 For This Rom
@samsung for Note5 firmware
@Smokkiekinz for let me use his ROM as base
@malbert16442 for worked with me to this ROM
@darkera13 @ManuProN5 , @komarov27 and @jesse-chan for helped me port ROM
@joo0525joo for layout fixes​

saved

Wowwww i thought there is no hope for a new rom. THANKS A LOT

akanesaki31 said:
Wowwww i thought there is no hope for a new rom. THANKS A LOT
Click to expand...
Click to collapse
well dont get to excited Im pretty sure mms isnt working yet

jrkruse said:
well dont get to excited Im pretty sure mms isnt working yet
Click to expand...
Click to collapse
Fortunately, i don't use MMS. i'm downloading it now.

So far so good. The rom runs smoothly and i love it. If fixed my auto brightness problem from stock rom too.
Btw, which xposed zip file should i flash?

akanesaki31 said:
So far so good. The rom runs smoothly and i love it. If fixed my auto brightness problem from stock rom too.
Btw, which xposed zip file should i flash?
Click to expand...
Click to collapse
I dont know goto the main thread and see

Awesome, very cool. Waiting for news on mms as I do need that to work. Watching intently and reading as I'm excited to try a new Rom on my S5 which still has lots of life yet! About ready to go No BS to slim it up. Thanks for this!

Hmmmm... interesting!

Can FF be used, or only SS?

mixerpilot said:
Can FF be used, or only SS?
Click to expand...
Click to collapse
Yes
JohnK71 said:
Awesome, very cool. Waiting for news on mms as I do need that to work. Watching intently and reading as I'm excited to try a new Rom on my S5 which still has lots of life yet! About ready to go No BS to slim it up. Thanks for this!
Click to expand...
Click to collapse
I have a fix for MMS. Will upload tomorrow

New Rom is Up in OP
Do a full wipe
setup phone remember to disabel lockscreen
I added next lock screen and echo lock screen so you can choose they are alot smoother I recommend Next Lockscreen
To Get MMS working
Open Galaxy Tools grant su access then click in Sec_Ril_Dump
Now Click On MMS PROVISIONING
Now scroll down to MMSC and click on MMSC address
Now enter first one if it doesnt work try second one
http://mms.vtext.com/servlets/mms?X-VZW-MDN=1112223333
http://mms.vzwreseller.com/servlets/mms?X-VZW-MDN=1112223333
MDN=1112223333 changing those number to your phone number
First MMS might take a few seconds to send.
Edit: This only works with verizon service

Network issues
Hey mate @jrkruse thanks for your rooting tutorials on pb1 rom, it really helped,
I decided to flash this rom with safestrap ,
i flashed G900V_Fix Safestrap.zip
Then the Rom
Everything went well but the device won't recognize my Sim Card i don't know if it's a modem issue,
But have moved back too pb1 as this phone is my daily Driver,
Why do you think i have the insert sim issue ?

phantorm said:
Hey mate @jrkruse thanks for your rooting tutorials on pb1 rom, it really helped,
I decided to flash this rom with safestrap ,
i flashed G900V_Fix Safestrap.zip
Then the Rom
Everything went well but the device won't recognize my Sim Card i don't know if it's a modem issue,
But have moved back too pb1 as this phone is my daily Driver,
Why do you think i have the insert sim issue ?
Click to expand...
Click to collapse
Do you have verizon service? If not you might be able to delete the setupwizard from the settings/app folder and that may work

jrkruse said:
Do you have verizon service? If not you might be able to delete the setupwizard from the settings/app folder and that may work
Click to expand...
Click to collapse
I don't have verizon service i use this device internationally as unlocked,
But using this ROM it won't detect my sim card and i think its a Radio /Modem issue, do you have a G900v modem i could flash into the rom.
I don't know if you understand what am trying too say

phantorm said:
I don't have verizon service i use this device internationally as unlocked,
But using this ROM it won't detect my sim card and i think its a Radio /Modem issue, do you have a G900v modem i could flash into the rom.
I don't know if you understand what am trying too say
Click to expand...
Click to collapse
Do you have a verizon S5? If you goto settings/about phone if your baseband shows up the your modem is fine. If you delete SecSetupWizard2015 from the system/app folder it should remove the the invalid sim message. Other than that I dont know

Just a quick question as to what is the correct baseband for this ROM.
Settings / about shows I'm on baseband
G900VVRU2B0K3 - Is this the correct BB version?
Also when I follow the instructions to fix MMS via Galaxy tools, send & receive MMS still fails.
Appreciate any insight & I can't thank you enough for continuing to bring the awesome goodies for the Verizon S5

mobile_sensei said:
Just a quick question as to what is the correct baseband for this ROM.
Settings / about shows I'm on baseband
G900VVRU2B0K3 - Is this the correct BB version?
Also when I follow the instructions to fix MMS via Galaxy tools, send & receive MMS still fails.
Appreciate any insight & I can't thank you enough for continuing to bring the awesome goodies for the Verizon S5
Click to expand...
Click to collapse
Are you on verizon service?

No network
Did not work on my case . No network at all , it show up for a second and go away. ( call not working also ). Try installing 3 time on bok3 , og5 and pb1 baseband , same think no network. On verizon .

jrkruse said:
Do you have a verizon S5? If you goto settings/about phone if your baseband shows up the your modem is fine. If you delete SecSetupWizard2015 from the system/app folder it should remove the the invalid sim message. Other than that I dont know
Click to expand...
Click to collapse
I use a G900v(Verizon)
Just to know if i made a mistake , i just reflashed this Rom. Everything works fine except this network issue, it detects network and it loses it in seconds, i get two bars and immediately i get the round error network icon,
I tried to reboot it just does the same, it gains and loses network in seconds, Just like a off and on cycle
sorry for bad image quality , but thats the only means which i could share

[ROM][6.0.1] SlimRoms Marshmallow [Dev Aboot only][KLTEVZW][GSM carriers][Unofficial]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To God be the glory, my SlimRoms project finally works!
Sleek, simple, slim, SLIMROMS. This is the lightweight champion of cell phones! Not another CM based rom, SlimRoms is based off of AOSP source, with custom edits for a smoother, simpler interface. If you are looking for every feature, check out AOKP, or PAC ROM, but if you want to step back into the simple life with your phone, then this is the Rom to do it. Some say that SlimRoms is an almost "vanilla" experience.
Why build Marshmallow in a world that is about to turn Oreo? Well, actually I needed this for another project, but I figured that I would share it with anybody else who wants it.
**** This is an UNOFFICIAL ROM. Install at your own risk! ****
Downloads :
https://www.mediafire.com/folder/itcsuce33v2sc/Marshmallow
Gapps link:
http://opengapps.org/
-Which I personally tested Arm 6.0 Pico.
Be sure to follow these installation steps very carefully, as they may be different then what you are used to.
Installation instructions:
-Follow this guide to get your phone onto the Developer aboot:
https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
-Download ROM and gapps, and put them on your phone or external storage.
-Reboot into recovery mode - TWRP
-Backup what you had. (Just to be safe.)
-Wipe. (I personally wipe everything prior to flashing new roms, but at least do the basic wipe.)
-Install Rom.
-Install Gapps. - Optional
-Reboot to system and enjoy!
I do not recommend installing superSU on this ROM! SU permission is already built in, and superSU has been causing problems with the rom. Please read the thread for further details.
What works :
Code:
So far everything that I have tried works, such as
- Camera for pictures and video!
- Phone calls/receiving
- Data 2g/3g/LTE
- Bluetooth
- WiFi
- PTP/MTP
- GPS
- Multi-Window, just long press the "recents" button.
etc....
What doesn't :
Code:
- Let me know in the forums if you find any issues.
Features:
+Status Bar Tweaks
-- Icon settings
-- Clock and Date Appearance
--Battery Status Style
+SlimRecents (Can be reached by holding down the home button)
-- Edit color and display of SlimRecents bar
+Quick Settings
-- Add and rearrange tiles.
+SlimDim Navigation Bar
+RRO Layers Support ( Unofficial - Works, see post #4 for details! )
+Hot Spot
+Edit icons and names of apps! ( Requires icon pack. )
AND MORE!
This SlimRoms MM ROM was built for the kltevzw cid15 version phone. I have not tried this on any other device, but you are welcome to try it AT YOUR OWN RISK. You will need to edit the META-INF updater script to accomplish this.
Code:
Disclaimer: SlimRoms is not responsible for any damages to your device.
All of my work is completely available for any who wish to use or modify it. I didn't make SlimRoms, the device trees, or vendor blobs. I simply used and edited existing material. A huge thanks should go to those who actually created this stuff.
SlimRoms XDA Forum: http://forum.xda-developers.com/slimroms
Source Code: http://github.com/SlimRoms/
Official websites: http://www.slimroms.net/ or http://slimroms.org/
Device trees: https://github.com/alaskalinuxuser/
ROM OS Version: 6.0.1 Marshmallow
ROM Kernel: Linux 3.4.107
Based On: AOSP
Created 2017-08-14
Last Updated 2017-08-14
Change log:
Code:
2017-08-14:
-First build release.

Screenshots!

Alright, something new to flash. ...
Thanks.

Unable to connect to network. When changing network types, the android.phone stops working.
Clean flash. SM900v

mastertech007 said:
Unable to connect to network. When changing network types, the android.phone stops working.
Clean flash. SM900v
Click to expand...
Click to collapse
Sorry to hear that you are having some trouble!
So, is it unable to connect at all, or does it have a problem only when you change network types?
When changing network types, what are you changing to/from?
Have you installed any mod, like SuperSU, magisk, multi-rom, etc.?
What carrier?
Is it possible to take a log cat after a fail? That would help a lot, since it worked here when I tested it.
Hopefully we can get to the bottom of this soon for you, and thanks for giving it a try.
Sent from my SGH-M919 using XDA-Developers Legacy app

AlaskaLinuxUser said:
Sorry to hear that you are having some trouble!
So, is it unable to connect at all, or does it have a problem only when you change network types?
When changing network types, what are you changing to/from?
Have you installed any mod, like SuperSU, magisk, multi-rom, etc.?
What carrier?
Is it possible to take a log cat after a fail? That would help a lot, since it worked here when I tested it.
Hopefully we can get to the bottom of this soon for you, and thanks for giving it a try.
Click to expand...
Click to collapse
It would not connect at all, no bars. Crashed when tried to change network to any network type.
No Mods, straight SLIM and gapps.
Verizon..
I will try to reinstall tonight. ..

Rsame as mastertecj007. I'm on kltevzw

mastertech007 said:
It would not connect at all, no bars. Crashed when tried to change network to any network type.
No Mods, straight SLIM and gapps.
Verizon..
I will try to reinstall tonight. ..
Click to expand...
Click to collapse
ddjr said:
Rsame as mastertecj007. I'm on kltevzw
Click to expand...
Click to collapse
Which modem and boot loader do you have?
Sent from my LG-H811 using XDA-Developers Legacy app

AlaskaLinuxUser said:
Which modem and boot loader do you have?
Sent from my LG-H811 using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'm using qb2.
Sent from my LG-H811 using XDA-Developers Legacy app

I have no idea. How can I check?

ddjr said:
I have no idea. How can I check?
Click to expand...
Click to collapse
Look at your baseband under settings.
Sent from my LG-H811 using XDA-Developers Legacy app

Ah, of course! Thanks. My baseband is luduaod3. So I think it is od3. I've never been able to change it though.

AlaskaLinuxUser said:
Which modem and boot loader do you have?
Click to expand...
Click to collapse
Bootloader is QB2
Baseband is QD1

ddjr said:
Ah, of course! Thanks. My baseband is luduaod3. So I think it is od3. I've never been able to change it though.
Click to expand...
Click to collapse
I followed this tutorial:
https://forum.xda-developers.com/showthread.php?t=3561529
And you end up on QB2.
mastertech007 said:
Bootloader is QB2
Baseband is QD1
Click to expand...
Click to collapse
Perhaps you need the QB2 baseband? Just a guess though.
You guys both have unlocked boot loaders, right? CID15 Verizon S5's? Just checking to be sure.....
Sent from my LG-H811 using XDA-Developers Legacy app

AlaskaLinuxUser said:
I followed this tutorial:
https://forum.xda-developers.com/showthread.php?t=3561529
And you end up on QB2.
Perhaps you need the QB2 baseband? Just a guess though.
You guys both have unlocked boot loaders, right? CID15 Verizon S5's? Just checking to be sure.....
Click to expand...
Click to collapse
Yes, CID15, unlocked..

I believe mine is cid11.

ddjr said:
I believe mine is cid11.
Click to expand...
Click to collapse
Sorry, I was on vacation, out of cell network.
This will not work on cid11. It is for cid15 phones. Sorry.
Sent from my LG-H811 using XDA-Developers Legacy app

Rom still needs development.
No Cellular Network connection on Verizon U.S. (Kansas)
Unlocked dev bootloader
QA1 Baseband
cid15 Samsung dimms
Edit:
Also tried with PD1 baseband, same issue.

blakerateliff said:
Rom still needs development.
No Cellular Network connection on Verizon U.S. (Kansas)
Unlocked dev bootloader
QA1 Baseband
cid15 Samsung dimms
Edit:
Also tried with PD1 baseband, same issue.
Click to expand...
Click to collapse
Looks like I'll have to get some logs from you guys. It is working here in Alaska. You can see post #9 where I have LTE signal, and post #1 I have a voicemail notification.
Sent from my LG-H811 using XDA-Developers Legacy app

Okay, I see the issue. This rom is being retitled for GSM users with the Verizon phone. Only GSM works, not CDMA.
However, for the brave:
Here is something I saw people were doing to another rom to get the sprint to work. I don't know if this would work here or not. I don't use CDMA here, but you could try to change the build.prop file for
Code:
ro.telephony.default_network=3
And copy the /system/rild/cdma/lib/libril.so and overwrite the /system/rild/gsm/lib/libril.so file with it. Essentially tricking it into looking for the libril.so file but finding the one for CDMA. Perhaps that would work here?
If anybody tries it, it would be interesting to know if it works.....