Hi guys, i have problems with jbx on mokee rom, after unlocking the screen, it doesn't work but buttons on the bottom panel are glowing. I've tried all versions for 4.4.2.
Pikachu8119 said:
Hi guys, i have problems with jbx on mokee rom, after unlocking the screen, it doesn't work but buttons on the bottom panel are glowing. I've tried all versions for 4.4.2.
Click to expand...
Click to collapse
Try the latest 18/2 build..works fine
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
Try the latest 18/2 build..works fine
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
i've tried it today
Pikachu8119 said:
i've tried it today
Click to expand...
Click to collapse
There's a 19/2 build up now
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
There's a 19/2 build up now
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
and i forgot to say, that i dont have signal and memory card is not working
EDIT: installed version from 02-20d, and now i have only the screen issue
Pikachu8119 said:
and i forgot to say, that i dont have signal and memory card is not working
EDIT: installed version from 02-20d, and now i have only the screen issue
Click to expand...
Click to collapse
Change the minimum frequency to 300 in trickster mod
Super_Commando said:
Change the minimum frequency to 300 in trickster mod
Click to expand...
Click to collapse
Thank you, i downloaded sr-fixed version, but battery life isn't as good as people said in the main theme of jbx.
Pikachu8119 said:
Thank you, i downloaded sr-fixed version, but battery life isn't as good as people said in the main theme of jbx.
Click to expand...
Click to collapse
Try Shurikkb 21/2 build
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
Try Shurikkb 21/2 build
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
battery life isn't good too, installed shurik's 02-21a
I'm on Mokee 4.4 as well and have the same problem with latest JBX. It prevents me from getting carrier signal. i thought it was originally a problem with the liquidsmooth I was trying to install but when I tried applying it to Mokee it stopped my cell signal as well.
psymon stark said:
I'm on Mokee 4.4 as well and have the same problem with latest JBX. It prevents me from getting carrier signal. i thought it was originally a problem with the liquidsmooth I was trying to install but when I tried applying it to Mokee it stopped my cell signal as well.
Click to expand...
Click to collapse
Check your APNs. If there's nothing under the APN settings try the "Reset to Default" option. If that doesn't work, you'll have to Google the APN settings for your service carrier and input them manually. Or, better still, if you can find the apns-conf.xml that is specifically for your carrier download that and install in /system/etc then set the permissions to rw-r--r-- and reboot.
psymon stark said:
I'm on Mokee 4.4 as well and have the same problem with latest JBX. It prevents me from getting carrier signal. i thought it was originally a problem with the liquidsmooth I was trying to install but when I tried applying it to Mokee it stopped my cell signal as well.
Click to expand...
Click to collapse
10% mod in JBX installer breaks your signal, and also your sdcard recognition
Untick that option
Pikachu8119 said:
battery life isn't good too, installed shurik's 02-21a
Click to expand...
Click to collapse
I installed Shurikkb 20c, it works fine for me.
then i try 2/25, battery life is not good.
so i revert back to 20c now
1BadWolf said:
Check your APNs. If there's nothing under the APN settings try the "Reset to Default" option. If that doesn't work, you'll have to Google the APN settings for your service carrier and input them manually. Or, better still, if you can find the apns-conf.xml that is specifically for your carrier download that and install in /system/etc then set the permissions to rw-r--r-- and reboot.
Click to expand...
Click to collapse
hmm not sure what i'm doing here. reset to default gave me no luck. After manually entering ATTs info and selecting save from the menu, no APN shows up in the 'list' i supposedly just populated with an entry. Searching for available networks also leaves the phone searching seemingly indefinitely, which would work just fine before installing the JBX. As far as copying an xml into that directory, not sure how to do that.
And as I was trying to use USB mass storage for it it won't work for me either. I'm gonna have to give up on the JBX kernal, time to find a non kexec to resolve these battery issues. thanks for trying.
PhoenixNghi said:
10% mod in JBX installer breaks your signal, and also your sdcard recognition
Untick that option
Click to expand...
Click to collapse
ah hah THANKS!
I'll try this.... and waiting 5 minutes for edit...
that's what did it. Thanks again, working now.
damn,,, looks like i'll have to drop it anyway, USB storage still wont work.
psymon stark said:
...............
damn,,, looks like i'll have to drop it anyway, USB storage still wont work.
Click to expand...
Click to collapse
CM 26-2 + JBX 27-2 and I have awesome battery life
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USB Mass storage is normal
You must do 2 steps to make UMS work: (swipe down from notification bar)
- Change to Mass storage
- Turn on usb storage
Anw, you can use Solid Explorer to send/receive your files with PCs in your network.
PhoenixNghi said:
CM 26-6 + JBX 27-2 and I have awesome battery life
USB Mass storage is normal
You must do 2 steps to make UMS work: (swipe down from notification bar)
- Change to Mass storage
- Turn on usb storage
Anw, you can use Solid Explorer to send/receive your files with PCs in your network.
Click to expand...
Click to collapse
Alright, I'll give that one a shot. Thanks.
When i was attempting to use the USB before I would bring up the dialog for it, then Click "turn on USB" then it would give the warning saying apps might not work, etc, then click ok to that and then it would engage. Witht eh JBX on mokee or liquid, clicking "turn on USB" would just sit there with the loading circle indefinitely.
Gonna hit up CM within the next day or so see how that goes.
PhoenixNghi said:
CM 26-2 + JBX 27-2 and I have awesome battery life
USB Mass storage is normal
You must do 2 steps to make UMS work: (swipe down from notification bar)
- Change to Mass storage
- Turn on usb storage
Anw, you can use Solid Explorer to send/receive your files with PCs in your network.
Click to expand...
Click to collapse
are you using battery friend?
Related
ParanoidAndroid Rom(Port) for Defy+
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an ongoing developer project to make way for a modification that will entirely transform your device, but retain the aesthetics and the experience of your phone. I know you've seen tablet mode roms before, they change two lines in your build.prop file which you could easily edit yourself in seconds and maybe throw a keyboard in there to make it work better. It's a start, but this ain't enough. This thing has potential, but it is wasted the moment you try to stuff a full blown tablet into your poor phone. Yet we all know our high res phones can very well handle more than silly 1-column layouts. So the magic must be in between somewhere, a place that google must have overlooked and left blank. Yes, this rom strives to drop your device into tablet mode, but it won't stop there, it will reshape and redefine ics to make it all a usefull addition and not just a cute novelty. We're calling it: Hybrid mode, best of both worlds.
Click to expand...
Click to collapse
This has been ported from cm9 rom for the device
Please consider donating the cm team
epsylon3~~~~quarx~~~~maniac103
Click to expand...
Click to collapse
FOR GB KERNEL ONLY
ROM:PARANOID 1.99a JB
FIX:PARANOID DERP FIX
GAPPS:Gapps
1:In bootmenu recovery Wipe data/Factory reset
2:Choose zip from sdcard
3:Flash
4:Flash hybrid gapps
5:Wipe cache and dalvik cache
6:Reboot
Click to expand...
Click to collapse
Go to Settings, System, Font size, set it to NORMAL
Goto Paranoidandroid Settings-Configuration-Choose Tablet Optimised for TABLET MODE
Launcher Settings: Margins: Small (if youre using apex / nova), Show permanent SearchBar: Yes, Grid: 5x4, Resize all widgets: Yes, Wallpaper Scrolling: Off
Click to expand...
Click to collapse
IF YOU HAVE ANY ISSUES,please keep them to yourself!
Just kidding... Post it here we are here to help
Note:All Issues In CM9 are still present in this rom
Fm radio does not work for now
Click to expand...
Click to collapse
cyanogenmod team, cm9
paranoidandroid team for the rom, pa
brajesh.sharma87 for DEFY ROM PORT
Tina: http://krebsmilk.de/,For The Images
ldiomedi for the Images
Click to expand...
Click to collapse
v1.6
Built from source - 10/7/2012 - 00:27:58
OTA app changed (This trashes OTA update, please download manually this version). More responsive methods
Merged latest CM changes, including a lot of fixes and improvements for device tree
Improvements on frameworks, fixed for once and finally all DPI related crashes
SystemUI mode can be configured now
Cleanup and speedup of hybrid code via native libs (I'd say 25%)
A lot more of changes, you can check them here: https://github.com/ParanoidAndroid
v1.5
Built from source - 25/6/2012 - 11:3:12
Removed AROMA installer, now using CM kernel, you can install any AOSP kernel
Improvements on OTA app, scheduled checkups
Improvements on Backup app, now it automatically launches on startup after you install a newer (or older) version
Hybrid speedup, less lag, considerably faster list scrolling when pad/pal is in action
Keyboard scaling, an androids first
PAD/PAL bugfixes for apps that still crop images in lower dpis
Settings revamp, speed preferences to switch between modes without having to set up anything, less clutter
Trebuchet extras: 3x4 widgets, speed dial menu button, ... and some weird rocket button which im sure will be very useful to most of you
Pad.prop revamp, new preferences that should pretty much nail it. Im sorry but this trashes your old settings again, do not attempt to restore them unless you do it in a text editor
Click to expand...
Click to collapse
RESERVED .......
will test soon
If u get bootloop try to fix perms in recovery-advanced
Thanks for your contribution .
I appreciate and happy to help.
It shud be a gud news for defy + users.
Sent from my defy
i can´t download the "hybrid gapps"
smartiejunky said:
i can´t download the "hybrid gapps"
Click to expand...
Click to collapse
+1
can i use this, from paranoid froyo kernel "fixed gapps"?
mosta00 said:
+1
can i use this, from paranoid froyo kernel "fixed gapps"?
Click to expand...
Click to collapse
i don´t know... :/ sorry! i´m just a little user
mosta00 said:
+1
can i use this, from paranoid froyo kernel "fixed gapps"?
Click to expand...
Click to collapse
Yes u can
ill fix the link
Sent from my MB525 using xda premium
this is for froyo right???
coolgame said:
this is for froyo right???
Click to expand...
Click to collapse
Well u dont read at all
Read the Instructions part
Sent from my MB525 using xda premium
I was stuck in bootanimation, fixed permitions, wipe cache and dalvik again but nothing works
Sent from my MB526 using xda premium
ya i read that later
JakeOcn said:
I was stuck in bootanimation, fixed permitions, wipe cache and dalvik again but nothing works
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
i have exactly the same problem !
and i try to flash latest build from quarx, it doesn´t work. "installation abort"
stuck on boot animation for me too
coolgame said:
stuck on boot animation for me too
Click to expand...
Click to collapse
Yea for me also :banghead:
Sent from my MB526 using xda premium
no one have tried this fantastic rom??? I wanna try this on my defy!!!
some Q:
1) how can I move app 2 sd?? (I've got the same problem with CM9, I donno how to move them!!)
2) how many hours do you get with this rom?
3) any bugS?? Fotocamera are something else?
Thanks in advance! :angel:
kryptonitiko said:
no one have tried this fantastic rom??? I wanna try this on my defy!!!
some Q:
1) how can I move app 2 sd?? (I've got the same problem with CM9, I donno how to move them!!)
2) how many hours do you get with this rom?
3) any bugS?? Fotocamera are something else?
Thanks in advance! :angel:
Click to expand...
Click to collapse
we all want to test this awesome rom! but most of us got bootloops after flashing.
and the "hybrid gapps" are still offline.
for me it doesn´t work when i use the fixed gapps from the froyo version.
smartiejunky said:
we all want to test this awesome rom! but most of us got bootloops after flashing.
and the "hybrid gapps" are still offline.
for me it doesn´t work when i use the fixed gapps from the froyo version.
Click to expand...
Click to collapse
I wanted to try this rom in 2nd boot...I'll wait that someone test it! I hate bootloops!!! Yesterday I got bootllops flashing whiterabbit cyanogen and I spent a lot of time trying to restore the phone, than I flash CM9 kernel and know is the best rom GB based for me!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Important Notes:
Fully compiled from AOSP source ( source.android.com) with my mods and interesting ones from CM/AOKP.
Read the changelog and installation instructions on the website here carefully.
Feature requests will be ignored in general but will review ( if a relevant commit is provided) and decide
No ports based on my ROM zip file, manifest.xml will be updated regularly and feel free to compile from source
Very Lite ROM including GAPP's Its only 100 Mb
Check out our feature list here
Changelog
Find our latest Changelog go here
Instructions
1. Take CWM Backup.
2. Download Slim ROM & Slim GAPP's.
3. Boot Into CWM Recovery.
4. Wipe Data & Format System in Mount & Storage.
5. Flash Slim ROM and Slim GAPP's.
6. Reboot and Enjoy the ROM.
Thanks!
Big thanks to Slim ROM Team, Adam & Grarak, without them SlimRoms wouldn't be possible for Galaxy R.
You can find the full list of credits here
Source
Please visit here for the source code.
Downloads
1. Slim Beam ROM.
2. GAPP's.
Change Log:
1. Initial Release on 28.12.2012
2. Beta 2 Release on 01.01.2013.
Code:
1. Fixed Mobile Data (No need to uncheck the Mobile Date on Boot).
2. Some Performance Tweaks.
3. If you have problem with WIFI, Flash [URL="http://forum.xda-developers.com/showpost.php?p=36208096&postcount=64"]WIFI fix[/URL]
Bug's:
1. Settings->Device Options.
2. OTA.
3. You Tell me.
Screen Shots:
Great buddy. You did again a nice Job. new ROM. Means New Year Gift from MJ buddy. :highfive::good:
Incredible.Good job.Waiting for some reviews , then i'll flash it too
i had check link but it does not showing any download option
can anyone give what is not working in this rom
slim rom
Its just 89 mb.....is that ok
azhar.munshi said:
i had check link but it does not showing any download option
can anyone give what is not working in this rom
Click to expand...
Click to collapse
After clicking download on the "no preview available" page, you must click "download anyway" on the next page that pops up
Problems encountered:
1.Google account setup crashes at 'backup and restore'
2.Unable to access Play Store (Error retrieving information from server [RH-01])
3.Unable to import contacts from SIM card
4.Home button not working
5.Stock browser crashes
6.Calendar crashes after boot
EDIT: Tried flashing normal gapps for 4.1.2, works flawlessly, looks like the Slim gapps are causing the problems
Can i use slim gapps without installing slim ROM?
Sent from my GT-I9103 using xda app-developers app
sachindpai1 said:
Its just 89 mb.....is that ok
Click to expand...
Click to collapse
It is. The OP also says it is small.
@OP:
1. Is this fully compiled from source?
2. Why do we have to uncheck mobile data? It has already been solved.
Is everything working. Like camera, Bluetooth , wifi etc. OP just says ota update bugs.
Sent from my GT-I9103 using xda app-developers app
F3niX said:
Is everything working. Like camera, Bluetooth , wifi etc. OP just says ota update bugs.
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Try it buddy. I think its small & very useful.
kataria.vikesh said:
Try it buddy. I think its small & very useful.
Click to expand...
Click to collapse
I really want to try, but I use Camera, WiFi and Bluetooth everyday and thats the sole reason I am asking about it
No offence
F3niX said:
I really want to try, but I use Camera, WiFi and Bluetooth everyday and thats the sole reason I am asking about it
No offence
Click to expand...
Click to collapse
WIFI, Camera & Bluetooth are working fine buddy, so you can try it....
Adam77Root said:
It is. The OP also says it is small.
@OP:
1. Is this fully compiled from source?
2. Why do we have to uncheck mobile data? It has already been solved.
Click to expand...
Click to collapse
No Adam its not complied from sources buddy i've ported it, Today i will try with your latest CM 10 as base and update it...
sachindpai1 said:
Its just 89 mb.....is that ok
Click to expand...
Click to collapse
Yes ROM is just 89 MB that's why its called slim ROM ....
boulder96 said:
After clicking download on the "no preview available" page, you must click "download anyway" on the next page that pops up
Problems encountered:
1.Google account setup crashes at 'backup and restore'
2.Unable to access Play Store (Error retrieving information from server [RH-01])
3.Unable to import contacts from SIM card
4.Home button not working
5.Stock browser crashes
6.Calendar crashes after boot
EDIT: Tried flashing normal gapps for 4.1.2, works flawlessly, looks like the Slim gapps are causing the problems
Click to expand...
Click to collapse
Thank you for flashing ROM, i was using 4.1.2 GAPP's so i think i havent faced these issues i guess, tomorrow i will try to solve these issues..
d2dprajesh said:
Can i use slim gapps without installing slim ROM?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
I am not sure you can try them...
F3niX said:
I really want to try, but I use Camera, WiFi and Bluetooth everyday and thats the sole reason I am asking about it
No offence
Click to expand...
Click to collapse
Camera does not work, wifi works, so does bluetooth (tested by sending a 10mb file to my galaxy ace) :good:
The only thing i dislike about this rom is that the lockscreen button is a black circle
boulder96 said:
Camera does not work, wifi works, so does bluetooth (tested by sending a 10mb file to my galaxy ace) :good:
The only thing i dislike about this rom is that the lockscreen button is a black circle
Click to expand...
Click to collapse
Camera is working fine for me i just took some pick using it....
mj.vikram said:
Camera is working fine for me i just took some pick using it....
Click to expand...
Click to collapse
Oops yup it works. Just tried again
Is it possible to change the lock screen button back to stock?
1. Messaging -> Works
2. Calls -> Works
3. Camera -> Works but it's buggy.When i make photos in portrait mode , they appear in the gallery as they wre made in landscape mode
4. When the weather is activated in the lockscreen , the name of the network is almost getting out of the screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the unofficial CyanogenMod 10.1 nightlies
The releases will co-inside and the build start time is at 03:01 UTC every night and should be uploaded soon after. If at anytime the builds are not there, then there was a problem building the ROM, and we will have a look at it ASAP.
CyanogenMod 10.2 builds are available here: http://forum.xda-developers.com/showthread.php?p=47732474. The buildbot resources are beeing used for other projects and/or CM10.2 builds
Click to expand...
Click to collapse
These builds are compiled from the latest CyanogenMod repos and device repos on device, kernel and vendor files.
Furthermore these builds are multiDPI, i.e. you can run the rom at any dpi between 160 and 240 while maintaining hi-res assets.
Initial install
Make sure you are updated to stock LG ICS update (v20d) prior flashing the first time.
And remember to wipe data/cache
(These steps need only to be done once. Later updates can be just flashed over an existing installation without the need of a wipe)
And as always: I take no responsibility whatsoever for raging, screaming, crying, frustration, failing, confusion, etc.
You need to have a custom recovery installed in order to flash these builds;
e.g. http://forum.xda-developers.com/showthread.php?t=1859662
Download builds here
or via GooManager
Click to expand...
Click to collapse
Download Google Apps
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Changes
Upstream changes
Devicetree commits
Kernel commits
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Issues
Issuetracker
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Tip: If you want to have your density settings persist over updates and don't want to edit build.prop with every update, use local.prop.
create a file named local.prop in your /data root (i.e. /data/local.prop) with the following contents (overrides ro.sf.lcd_density in build.prop):
Code:
qemu.sf.lcd_density=160
Click to expand...
Click to collapse
Thanks/Credits
Click to expand...
Click to collapse
Won-Kyu Park - for his awesome work with all LG phones
Ricardo Cerqueira - for his work on the LG Star devices (mainly P990) and the P920. This made some of the porting a tad easier for me glancing at his changes.
cyanogen - For starting this great project
Google - This wouldn't have happened without the releases of Android from you
IRC channel
Click to expand...
Click to collapse
Visit us in #cyanogenmod-dev on freenode
reserved for future use
first reply :laugh:
i'd like to report that when you update from cm10 to cm10.1, a fully wipe is recommended by me
cm10.1 is stable enough for daily use, and hope it become more perfect :angel:
i'll keep to use and test cm10.1, cheers!
Thanks alot to milaq!
I will use until every HW work, but thank for your support
milaq said:
Works
Phone 2G/3G
Wifi
Camera
MTP and PTP
Mass Storage
Touch
EGL
Video Plyback
HW Acceleration
Sound
Headphones
Vibration
NFC
Bluetooth
Sensors
Autobrightness
GPS
Video Recording up to 720p
USB Tethering
Wifi Tethering
...
Doesn't work atm
Wifi Direct
HWC + MHL
1080p Video Recording
Click to expand...
Click to collapse
same as cm10?
Maybe it's just me, but somehow I'm missing the performance menu.
Additionly, the phone doesn't boot into recovery anymore. The circle revolves endless in the 'Restart Phone' screen.
But the good news is, that the echoing I suffered in CM 10 is almost gone or just minimal, so that's not annoying anymore.
rockambole said:
same as cm10?
Click to expand...
Click to collapse
seems so...
-=bhf=- said:
Maybe it's just me, but somehow I'm missing the performance menu.
Click to expand...
Click to collapse
got to unlock that first. wont tell you how to do it, find out yourself
-=bhf=- said:
Additionly, the phone doesn't boot into recovery anymore. The circle revolves endless in the 'Restart Phone' screen.
Click to expand...
Click to collapse
pressing the power button while in that state should help. dont know the cause atm
milaq said:
seems so...
got to unlock that first. wont tell you how to do it, find out yourself
Click to expand...
Click to collapse
Oh, for god sakes. To unlock the hidden menu wasn't even an effort needed on my side. :laugh:
Seriously, though, why was the performance menu hidden in the first place? Too many casualties on the way?
pressing the power button while in that state should help. dont know the cause atm
Click to expand...
Click to collapse
Yes, that did the trick. Thanks for the info.
Fantastic now using it.
Sent from my Prada 3.0 using xda premium
JB !!
Hi Milaq,
Thanks for your great job :good:
Please continue to your developing for LG PRADA 3.0 P940
My first ROM is 2.3.7 V10D and after that upgraded to V20D but now using V20G (VDI/VODAFONE(ITALY))
Can I Install 10.1 on my device?
Android version: 4.0.4
Baseband version: v20g-eur-xxx-aug-8-2012+0
Kernel version: 3.0.21
Build number: IMM76D
Hi milaq,
There are some errors that you need to fix.
1.) Mounting USB on Mass Storage is not working
su
setprop persist.sys.usb.config mass_storage
but then when connected to a computer, turning on USB Storage doesn't work?
2.) I have a third party screenshot app called Screenshot UX, I tried capturing my notification drawer but it appears he captured the PRADA logo at boot? and everything I captured also appears the PRADA Logo. :laugh:
3.) Status bar error? The upper left toggle to your Quick settings panel is missing, remove the AM/PM on clock and it turns OK.
excellent work.
but
1- I miss the black and white theme. do you have any apk or zip of the original prada theme and widgets ?
2- My touch sensitivity decreased.
3- My Antutu points decreased from 7866 (stock rom) to 7666
Thanks for the great work.
here are the few things I noticed and wish to be added:
- Seems that my phone is warms up or is warmer than using the CM10.0
- No option to save the Camera captures directly to SD card
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
You can DL a CM Theme in the play store: https://play.google.com/store/apps/details?id=org.cerqueira.theme.Outline
adempozhari said:
1- I miss the black and white theme. do you have any apk or zip of the original prada theme and widgets ?
Click to expand...
Click to collapse
hi milaq,
seems mass storage can not work(both in recovery & system), and there's a bug related to signal :
when i turn off flight mode, the singnal is zero, it seems that the phone can not re-search the singnal when return from flight mode, i need to restart the phone manually.
thanks!
Again may I add glitches and errors that I've encountered so far.
1st and 2nd Screenshot
Some video glitch perhaps or is it just my device?
3rd and 4th Screenshot
Tried clearing cache but still resets to 12KB? CM10 and CM9 zero out's cache.
Hello, the biggest problem for me is screen sensitivity which have decreased since cm10. I flashed back stock rom and the problem disappeared so i believe it's a software problem,I will stay with stock rom till there is a fix.Thanks again for this great rom
Sent from my LG-P880 using Tapatalk 2
kgian2007 said:
Hello, the biggest problem for me is screen sensitivity which have decreased since cm10. I flashed back stock rom and the problem disappeared so i believe it's a software problem,I will stay with stock rom till there is a fix.Thanks again for this great rom
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
After Flashed CM 9/10/10.1 , How to flash back to stock ROM? Is it possible?
If you want flash stock rom look here forum.xda-developers.com/showthread.php?t=1761779
Sent from my LG-P970 using Tapatalk 2
Phone warm up. Black screen and no response of hardware power , i have to remove battery.
ART compatible AOSP-like Status Bar for Vzw on 4.4.2. LTE will be displayed as LTE or 4G depending on which file you flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Manual install:
Backup original file and corresponding odex file.
Copy/push the modded apk into /system/ and set permissions to rw-r-r
Move the apk into the correct directory (/system/framework-res/ or /system/priv-app/) overwriting the existing file
Reboot
Via Recovery:
Backup your original file and corresponding odex file (if applicable).
Flash via TWRP/CWM
Note:
Replacing SystemUI.apk whilst the phone is running will change your wallpaper.
You're responsible for your own device; be careful.
Hmm the battery percent seems to have disappeared based on your screenshots. Or did you purposefully get rid of it?
Thanks for your work btw. These status bar mods are awesome.
phositadc said:
Hmm the battery percent seems to have disappeared based on your screenshots. Or did you purposefully get rid of it?
Thanks for your work btw. These status bar mods are awesome.
Click to expand...
Click to collapse
I'm doing this a different way than before. It may require a different battery mod. I'll be adding the battery mod back in.
Sent from my XT1060 using Tapatalk
phositadc said:
Hmm the battery percent seems to have disappeared based on your screenshots. Or did you purposefully get rid of it?
Thanks for your work btw. These status bar mods are awesome.
Click to expand...
Click to collapse
OP is updated with a new version. Do you still need the TMo version? Send me the framework-res.apk as well if you do.
Sent from my XT1060 using Tapatalk
OP updated to add native tether and fix method.
chaoslimits said:
OP is updated with a new version. Do you still need the TMo version? Send me the framework-res.apk as well if you do.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
SystemUI process has stopped when I install or manually copy the first one. When I modify and replace just image resources myself it works fine, these don't for some reason. VZW Dev Edition, 4.4.
ArtnerC said:
SystemUI process has stopped when I install or manually copy the first one. When I modify and replace just image resources myself it works fine, these don't for some reason. VZW Dev Edition, 4.4.
Click to expand...
Click to collapse
Are you setting the right permissions? I just downloaded and installed on my own Dev Edition and it is working.
Sent from my XT1060 using Tapatalk
chaoslimits said:
Are you setting the right permissions? I just downloaded and installed on my own Dev Edition and it is working.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
Yep. I have tried copying and setting permissions using shell through adb, using the file manager in TWRP and using Solid File Explorer. Same crash.
The only thing I just thought of is that I'm using ART, not sure why that would be a problem but it's possible I guess. Which runtime are you on?
Sent from my XT1060
ArtnerC said:
Yep. I have tried copying and setting permissions using shell through adb, using the file manager in TWRP and using Solid File Explorer. Same crash.
The only thing I just thought of is that I'm using ART, not sure why that would be a problem but it's possible I guess. Which runtime are you on?
Sent from my XT1060
Click to expand...
Click to collapse
Dalvik. Can't use ART because of whatsapp.
Sent from my XT1060 using Tapatalk
Moving on to Eclipse's rom so I'll be doing a lot less messing around. If you need something converted to your carrier let me know.
question. i previously installed native tethering by replacing the VzwEntitlementService.apk in /priv-apps. everything works ok, but everytime i turn on tethering, there still is a check for tethering subscription which is only for 'esthetic' reasons (still by-passes the check).
will your method remove the subscription check when tethering is turned on?
also, if i install your method, do i need to reenable the original .apk and .odex files for yours to compile over them?
thanks-
Thank you!
Awesome work! Stepped in here for the native tethering zip and it seems to work flawlessly! Got wifi hotspot running without a hitch.
jsphkm said:
question. i previously installed native tethering by replacing the VzwEntitlementService.apk in /priv-apps. everything works ok, but everytime i turn on tethering, there still is a check for tethering subscription which is only for 'esthetic' reasons (still by-passes the check).
will your method remove the subscription check when tethering is turned on?
also, if i install your method, do i need to reenable the original .apk and .odex files for yours to compile over them?
thanks-
Click to expand...
Click to collapse
This method totally bypasses the check. It doesn't matter if you have the stock app or any third party app. I tested with Vzw app and with Wifi tether for root access and I got no errors. The only necessary change is made in framework-res.apk.
chaoslimits said:
This method totally bypasses the check. It doesn't matter if you have the stock app or any third party app. I tested with Vzw app and with Wifi tether for root access and I got no errors. The only necessary change is made in framework-res.apk.
Click to expand...
Click to collapse
excellent! just flashed and no subscription check when enabling tethering. thank you!
i also tried flashing your AOSP status bar/battery % but on reboot i get systemUI crash. please advise.
jsphkm said:
excellent! just flashed and no subscription check when enabling tethering. thank you!
i also tried flashing your AOSP status bar/battery % but on reboot i get systemUI crash. please advise.
Click to expand...
Click to collapse
Are you on ART?
chaoslimits said:
Are you on ART?
Click to expand...
Click to collapse
Yes, ART is enabled.
jsphkm said:
Yes, ART is enabled.
Click to expand...
Click to collapse
ART seems to cause issues with SystemUI mods. If you don't mind can you send me all SystemUI.* files in /system/priv-app (I don't know if ART creates .odex files). I'd like to take a look at them.
chaoslimits said:
ART seems to cause issues with SystemUI mods. If you don't mind can you send me all SystemUI.* files in /system/priv-app (I don't know if ART creates .odex files). I'd like to take a look at them.
Click to expand...
Click to collapse
PM sent
chaoslimits said:
<array name="config_mobile_hotspot_provision_app" />
Click to expand...
Click to collapse
Nice find. I noticed those settings also, but I didn't pursue it because I didn't think it would be that easy.
Ctrl-Freak said:
Nice find. I noticed those settings also, but I didn't pursue it because I didn't think it would be that easy.
Click to expand...
Click to collapse
LOL. It's almost too easy.
You wouldn't happen to know how to odex 4.4 apks would you?
[ROM][3/21/14][4.4.2] AOSPA 4.2 Beta
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MAKE A BACKUP
1. UPDATE RECOVERY
2. FACTORY RESET
3. INSTALL ROM
3. INSTALL GAPPS
Click to expand...
Click to collapse
DOWNLOADS
4.0x Main Link
PA Gapps
KNOWN BUGS:
LED is a bit wonky
PA OTA FCs
Click to expand...
Click to collapse
Links
Website: http://www.paranoidandroid.co
Github: www.github.com/AOSPA-legacy
Gerrit: http://gerrit.paranoidandroid.co
Click to expand...
Click to collapse
@molesarecoming & @D4rKn3sSyS for this oustanding rom!
Click to expand...
Click to collapse
XDA:DevDB Information
AOSPA 4.0, a ROM for the Moto X
Contributors
ayysir, houstonn
Based On: AOSP
Version Information
Status: Beta
Created 2014-02-25
Last Updated 2014-03-21
Reserved
Reserved
reserved
Awesome !!!!!!!
Also what do you mean by update recovery???
Sent from my Nexus 7 using Tapatalk
mcsqwizzys98 said:
Awesome !!!!!!!
Also what do you mean by update recovery???
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Pretty sure it means make sure you're using the most recent stable recovery. Check with twrp or cwm before flashing. Sometimes outdated versions give off errors and can't flash.
Sent from my LG-D803 using Tapatalk
Awesome !!!!!! Downloading now
Sent from my Moto X using Tapatalk
Finally got this installed and it is a very nice ROM IMHO. Very much stock aosp there isn't a ton of feature like some of the other aosp ROMs but I really like the smoothness this ROM has to offer and everything works only bug I have is the speaker phone bug is present when in a call if I put on speaker phone I have to reboot to even get back in the dialer app.
Sent from my Moto X using Tapatalk
Here are the logcats I promised from G+. This is on a clean flash, barebones. Nothing other then TItanium Backup, the loggers, and my favorite file manager added.
Logcat0 is the first time opening PA OTA. It times out and gives ROM not found error, then update not found error.
Logcat1 is the second time opening it, but this time it sees I could use the gapps. It does allow to download as well, yesterday it wouldn't. May have been my location at work (edit: see data issue below).
Logcat2 is me calling the phone, answering and checking all is well. Then I switch to speaker phone and all seems well. Then switch back to and it stays on speaker with no microphone action. I hang up, close the app. Reopen the dialer and its just a white screen. Then it turns black. Close the dialer and reopen with the same issue. Yesterday I thought it rebooted after. Today I confirmed it reboots shortly after. Couldn't pull a kmsg since there's no "/process/last_kmsg" file/location.
Also, after awhile data drops out and won't come back no matter what. Logcat3 is data turned off, then turned back on. This is after it being on and loosing it totally. Seen some USB state changed for this log, yet nothing was ever plugged in.
I also randomly get this simcard issue window shown but haven't been able to grab it.
Sim pic
gokart2 said:
Sim pic
Click to expand...
Click to collapse
Thanks for pulling these logs for the devs I am experiencing the same issues not only on this ROM but every Aosp ROM for us sprint users (the data issue). Hopefully they can solve the issues other than that this ROM is rock solid I'm not running it at this moment but much appreciated that you took the logs.
Sent from my Moto X using Tapatalk
Touchless Control
Will it be possible to have touchless controls from Motorola working again with the device?
Droyyd said:
Will it be possible to have touchless controls from Motorola working again with the device?
Click to expand...
Click to collapse
Probably not, aosp roms aren't going to have the Motorola features
Sent from my XT1053 using Tapatalk
gokart2 said:
Here are the logcats I promised from G+. This is on a clean flash, barebones. Nothing other then TItanium Backup, the loggers, and my favorite file manager added.
Logcat0 is the first time opening PA OTA. It times out and gives ROM not found error, then update not found error.
Logcat1 is the second time opening it, but this time it sees I could use the gapps. It does allow to download as well, yesterday it wouldn't. May have been my location at work (edit: see data issue below).
Logcat2 is me calling the phone, answering and checking all is well. Then I switch to speaker phone and all seems well. Then switch back to and it stays on speaker with no microphone action. I hang up, close the app. Reopen the dialer and its just a white screen. Then it turns black. Close the dialer and reopen with the same issue. Yesterday I thought it rebooted after. Today I confirmed it reboots shortly after. Couldn't pull a kmsg since there's no "/process/last_kmsg" file/location.
Also, after awhile data drops out and won't come back no matter what. Logcat3 is data turned off, then turned back on. This is after it being on and loosing it totally. Seen some USB state changed for this log, yet nothing was ever plugged in.
I also randomly get this simcard issue window shown but haven't been able to grab it.
Click to expand...
Click to collapse
thanks but did not explain much, a longer logcat also helps
Devans32 said:
Probably not, aosp roms aren't going to have the Motorola features
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Hmm, it's not good. No active display, no notifications led
Thanks, ayysir for bringing P.A. to the moto x.
I have one question. Where are P.A. settings and halo?
I hope they still exist.
perri.etb said:
Thanks, ayysir for bringing P.A. to the moto x.
I have one question. Where are P.A. settings and halo?
I hope they still exist.
Click to expand...
Click to collapse
dont exist...
New build up
Sent from my LG-D801 using Tapatalk
ayysir said:
New build up
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Where can I download it?
d14gvn said:
Where can I download it?
Click to expand...
Click to collapse
Link's in the OP but here it is