Hey guys, using the Nexus 4 screen protector, There will be a cut-out for the camera and some for the gyro-sensors. If the gyro-sensor is not covered you will have in-call issues with the screen turning off as if it was against your ear. So make sure when you buy you'r screen protector it has 2 cuts on the side, One for the sensor and one for the Camera
Cheers,
Luke
Lukemolina said:
Hey guys, using the Nexus 4 screen protector, There will be a cut-out for the camera and some for the gyro-sensors. If the gyro-sensor is not covered you will have in-call issues with the screen turning off as if it was against your ear. So make sure when you buy you'r screen protector it has 2 cuts on the side, One for the sensor and one for the Camera
Cheers,
Luke
Click to expand...
Click to collapse
This thing has a gyro sensor?! WOW!
One problem, I'm holding my gyro in front of the phone and it won't detect it. Is that because my screen protector is covering the sensor?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sy224048 said:
This thing has a gyro sensor?! WOW!
One problem, I'm holding my gyro in front of the phone and it won't detect it. Is that because my screen protector is covering the sensor?
Click to expand...
Click to collapse
Its called an ambient sensor but meh, you get the point. And yes, your phone has a gyroscope built in, that's what makes photosphere works.
jiayit said:
Its called an ambient sensor but meh, you get the point. And yes, your phone has a gyroscope built in, that's what makes photosphere works.
Click to expand...
Click to collapse
I was joking..... I know what it does. And I'm pretty sure the gyroscope isn't even visible, it's inside the phone. But I may be wrong.
sy224048 said:
I was joking..... I know what it does. And I'm pretty sure the gyroscope isn't even visible, it's inside the phone. But I may be wrong.
Click to expand...
Click to collapse
Meh I need to improve on my sarcasm skills!
Related
Hello guys, so what screen protectors are you using? I need a screen protector, because there aren't any decent ones for ace plus here in Egypt.
A link to an online store would be appreciated, thanks.
Screen-Protector
I use GADGET SHEILDZ screen protector
It's one of the best screen protector website around the world
&
plus point is it gives you Total-Body Scratch Protection mean ;
Front screen scratchguard
Side panel protection layer
Back panel body protection
Reusable
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link to screen protector : Samsung Galaxy Ace Plus S7500 Screen Protector
Fcrate said:
Hello guys, so what screen protectors are you using? I need a screen protector, because there aren't any decent ones for ace plus here in Egypt.
A link to an online store would be appreciated, thanks.
Click to expand...
Click to collapse
Choose http://www.ebay.com/bhp/samsung-galaxy-ace-plus-screen-protector
imElectronica said:
Choose http://www.ebay.com/bhp/samsung-galaxy-ace-plus-screen-protector
Click to expand...
Click to collapse
Thank you, I've ordered two of these for a test.
I also ordered one Gadget Shieldz, seems good enough, I'll see how it goes.
Fcrate said:
Thank you, I've ordered two of these for a test.
I also ordered one Gadget Shieldz, seems good enough, I'll see how it goes.
Click to expand...
Click to collapse
try n reply.....
try the amzer shock proof scratchguard
I dont use screenprotector, cause drain battery.
Interface23 said:
I dont use screenprotector, cause drain battery.
Click to expand...
Click to collapse
Please do explain to us as to how a piece of plastic on the screen causes battery drainage.
I'm interested to know ?
Jaspersdream28 said:
Please do explain to us as to how a piece of plastic on the screen causes battery drainage.
I'm interested to know ?
Click to expand...
Click to collapse
Ops, my bad, I misunderstood the topic
Today the glue filled into the C that is engraved in the back of the phone came out. I'm kinda an HTC fanboy so this left me pretty upset.... My camera lens is also really scratched up. Has anyone dealt with this issue and how was it handled?
NoFanboy said:
Today the glue filled into the C that is engraved in the back of the phone came out. I'm kinda an HTC fanboy so this left me pretty upset.... My camera lens is also really scratched up. Has anyone dealt with this issue and how was it handled?
Click to expand...
Click to collapse
Someone else mentioned this happening. HTC offered to fix the phone which meant the owner would be without the device for ~10 days. You may look into seeing if VZW will swap it out.
NoFanboy said:
Today the glue filled into the C that is engraved in the back of the phone came out. I'm kinda an HTC fanboy so this left me pretty upset.... My camera lens is also really scratched up. Has anyone dealt with this issue and how was it handled?
Click to expand...
Click to collapse
Yes the post title was "HTC is a joke" I believe. discussion surrounded the rma process.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NoFanboy said:
Today the glue filled into the C that is engraved in the back of the phone came out. I'm kinda an HTC fanboy so this left me pretty upset.... My camera lens is also really scratched up. Has anyone dealt with this issue and how was it handled?
Click to expand...
Click to collapse
Slickwraps sells lens protectors, but that's probably a moot point since it's already scratched. However, buying some protection might help prevent further damage.
Any cases available on Prime and in stock that don't jack up the laser autofocus?
Sent from my Nexus 6P using Tapatalk
I see most cases have cut out for the three spots on the left (camera, flash, sensor) but not the two spots on the right. What are those? Is it ok to block it?
Spigen ultra hyper case is the only case that leave the visor fully exposed which I am planning to use the phone in.
http://www.spigen.com/collections/nexus-6p/products/nexus-6p-case-ultra-hybrid
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
km8j said:
Any cases available on Prime and in stock that don't jack up the laser autofocus?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Since the official cases block it, i'm assuming it shall be fine.
jtcb said:
I see most cases have cut out for the three spots on the left (camera, flash, sensor) but not the two spots on the right. What are those? Is it ok to block it?
Spigen ultra hyper case is the only case that leave the visor fully exposed which I am planning to use the phone in.
http://www.spigen.com/collections/nexus-6p/products/nexus-6p-case-ultra-hybrid
Click to expand...
Click to collapse
Don't know what those 2 holes are, but they don't look like sensors. The white thing on the right is a "warranty void if removed" sticker on top of a screw.
What's most interesting about this device is that it does indeed look like it could support dual sims with the right tray... Or a sim/SD card slot. There are definitely 2 chip hookups behind that shroud in the teardown. It's possible that it's just a dummy port though.
Sent from my Nexus 6 using Tapatalk
CIA and NSA listening ports. Ooh... wait... made in China... Ouch..
Sent from my Nexus 7 using Tapatalk
Alferboy said:
CIA and NSA listening ports. Ooh... wait... made in China... Ouch..
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Hahahahaha!
Haha.
...
Your probably right.
Hello there,
After two weeks of trial and error I got my fingerprint sensor working!
I cut out a piece of thick (resume) paper in the shape of the 10 gold contact pads on the sensor...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
...then taped the paper to the cover using double sided tape (under the contact pads!)
It makes a secure connection between all contact points on the sensor and logic board by applying pressure evenly!
Now I'm back to quickly unlocking my phone! :good:
Hopefully this helps someone! If you need more details let me know.
LG V20 H910 (AT&T)
We have no problems with the fingerprint sensor...
XblackdemonX said:
We have no problems with the fingerprint sensor...
Click to expand...
Click to collapse
Good! This post is for anyone having problems. It took me forever to find a solution so I wanted to report my findings to potentially help someone out.
jtay419 said:
My solution was to use thick resume paper to make sure the 10 contact points between the motherboard and sensor are lined up evenly.
Click to expand...
Click to collapse
Not sure i quite understood that, You disassembled the phone and put some paper between the sensor and the motherboard ? why does it even work
XblackdemonX said:
We have no problems with the fingerprint sensor...
Click to expand...
Click to collapse
Don't think you can say "we", when obviously somebody did have an issue.....
Sent from my LG V20 using XDA Labs
One Twelve said:
Not sure i quite understood that, You disassembled the phone and put some paper between the sensor and the motherboard ? why does it even work
Click to expand...
Click to collapse
Yeah I had a feeling I should elaborate more to prevent confusion. Doing that would surely prevent the sensor from working :laugh:
I cut out a piece of thick (resume) paper in the shape of the 10 gold contact pads on the sensor...
...then taped the paper to the cover using double sided tape (under the contact pads!)
It makes a secure connection between all contact points on the sensor and logic board by applying pressure evenly!
I'm definitely gonna add this to my original post. Without the images it doesn't make much sense lol.
Hello my friends
I have a samsung note 10 plus phone that fell, and this caused the appearance of a black spot and it increased in size little by little, and also the screen tactile broke down and now it works with the pen only, please help stop the size the black spot or remove it, and also can the screen tactile be repaired or no, thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Replace the display.
Always use a good case like the Zizo Bolt otherwise this phone will get damaged.
blackhawk said:
Replace the display.
Always use a good case like the Zizo Bolt otherwise this phone will get damaged.
Click to expand...
Click to collapse
The price of the screen is very high, my brother, and I cannot buy it. Is there an alternative way to fix it?
bndib said:
The price of the screen is very high, my brother, and I cannot buy it. Is there an alternative way to fix it?
Click to expand...
Click to collapse
Replace the whole phone. At least you could use the old one maybe for some parts in the future.
Unfortunately there's no way to repair a AMOLED display as it is comprised of thousands of semiconductors in its matrix that controls the individual OLEDs. The touch screen circuitry was also damaged.
blackhawk said:
Replace the whole phone. At least you could use the old one maybe for some parts in the future.
Unfortunately there's no way to repair a AMOLED display as it is comprised of thousands of semiconductors in its matrix that controls the individual OLEDs. The touch screen circuitry was also damaged.
Click to expand...
Click to collapse
Unfortunately, in any case, thank you, my dear brother, for your help, and accept my utmost respect and appreciation
so sad, this happen on mine too
snapdragon teaks said:
so sad, this happen on mine too
Click to expand...
Click to collapse
This phone won't survive without a good case. Not much help now, but bear that in mind if you replace it or haven't damaged it yet. With no case they are harder to hold too... slippery fish.
There's almost zero bezel... and the only thing they do more than corner hit when dropped is face plant on the display side. The spen corner seems to take more hits than the other corners too.